Simplified Synthesis of Biomass-Derived Si/C Composites as Stable Anode Materials for Lithium-Ion Batteries

Advances in silicon-carbon composites anodes derived from agro wastes for applications in lithium-ion battery: A review

Recently, the growing demand for high-performing batteries and different environmental challenges (such include global warming and climate change) have increased the requirement and demand for Lithium-ion batteries (LIBs) used in advanced technologies (i.e., electric cars and many others). To meet this increasing demand, there is an urgent need for more advanced technologies and materials. In the pursuit of developing anode materials, silicon has emerged as the utmost favourable choice for the next generation of LIBs, aiming to substitute the commonly used graphite. Carbon is commonly used to render silicon (Si) suitable for use since Si cannot be used directly as the electrode in LIBs. One of the recently discovered techniques in the development of high-performance LIBs is the use of inexpensive, sustainable, renewable, and eco-friendly materials. Agro-waste-derived silicon and carbon are often used as long as they don't negatively affect the LIB anode's performance. This review paper presents the advances in the development of silicon-carbon (Si/C) composite anodes sourced from agro-waste for applications in LIBs. It provides an overview of agro-waste-derived silicon-based anode materials and techniques for extracting silica from agricultural wastes. Next, the outline explains the preparation technique of Si/C composites obtained from agricultural residues for use in LIBs. Additionally, the paper delves into recent research challenges and the potential prospects of materials derived from agro-waste in the advancement of sophisticated LIBs battery materials.

Yolk shell structured YS-Si@N-doped carbon derived from covalent organic frameworks for enhanced lithium storage

Silicon (Si) has ultra-high theoretical capacity (4200 mAh g-1) and accordingly is widely studied as anode materials for lithium-ion batteries (LIBs). However, its huge volume expansion during charging/discharging is a fatal challenge. The preparation of Si-based composite materials with yolk shell structure is the key to solving the Si volume expansion. Here, N-doped carbon-coated Si nanoparticles (SiNPs) nanocomposites (YS-Si@NC-60) with yolk shell structure derived from covalent organic frameworks (COFs) was prepared. N-doped carbon shells derived from COFs not only maintain the well-ordered nanosized pores of COFs, which facilitates the transport of Li+ to contact with internal SiNPs, but also provide more extra active sites for Li+ storage. Most importantly, the internal void can effectively alleviate the damage effect of SiNPs volume expansion. The obtained YS-Si@NC-60 as a LIBs anode show high cyclic stability and Li+ storage performances. At 0.1 A g-1, the capacity is 1446 mAh g-1 after 110 cycles, and initial coulomb efficiency is as high as 82.2 %. The excellent performance can be attributed to the unique yolk shell structure. This simple and template-free strategy provides a new idea for preparing Si-C nanocomposites with yolk shell structure.

Expired milk powder emulsion-derived carbonaceous framework/Si composite as efficient anode for lithium-ion batteries

Anodes based on silicon/carbon composites promise their commercial prospects for next-generation lithium ion batteries owing to their merits of high specific capacity, enhanced ionic and electronic conductivity, and excellent compatibility. Herein, a series of carbonaceous framework/Si composites are designed and prepared by rational waste utilization. N, P codoped foam-like porous carbon/Si composites (FPC@Si) and N, P codoped carbon coated Si composites (NPC@Si) are fabricated by utilizing expired milk powder as a carbon source with facile treatment methods. The results indicate that the porous carbon skeleton and carbon shell can improve the conductivity of Si and stabilize the solid electrolyte interfaces to avoid direct contact between active material and electrolyte. Moreover, the influence of drastic volume expansion of Si on the anode can be efficiently alleviated during charge/discharge processes. Therefore, the Si/C composite electrodes present excellent long-term cycling stability and rate capability. The electrochemical performance shows that the reversible capacity of FPC@Si and NPC@Si can be respectively maintained at 587.3 and 731.2 mAh g-1 after 1000 charge/discharge cycles under 400 mA g-1. Most significantly, the optimized Si/C composite electrodes exhibit outstanding performance in the full cell tests, promising them great potential for practical applications. This study not only provides a valuable guidance for recycling of waste resources, but also supports a rational design strategy of advanced composite materials for high-performance energy storage devices.

Si@nitrogen-doped porous carbon derived from covalent organic framework for enhanced Li-storage

Due to ultra-high theoretical capacity (4200 mAh g^-1), silicon (Si) is an excellent candidate for the anode of lithium-ion batteries (LIBs). However, the application of Si is severely limited by its volume expansion of approximately 300% during the charge/discharge process. Herein, nitrogen-doped porous carbon (NC) capped nano-Si particles (Si@NC) composites with a core-shell structure were obtained by calcination of covalent organic frameworks (COFs) encapsulated nano-Si. COFs is a crystalline material with well-ordered structures, adjustable and ordered pores and abundant N atoms. After carbonization, the well-ordered pores and frameworks were kept well. Compared with other Si@NC composites, the well-ordered NC framework shell derived from COFs possesses high elasticity and well-ordered pores, which provides space for the volume expansion of nano-Si, and a channel to transfer Li⁺. The core-shell Si@NC composite exhibited good performances when applied as the anode of LIBs. At a current density of 100 mA g^-1, it exhibited a discharge-specific capacity of 1534.8 mAh g^-1 after 100 cycles with a first-coulomb efficiency of 69.7%. The combination of COFs with nano-Si is a better strategy for the preparation of anode materials of LIBs.

Rational Design of Silicon Nanodots/Carbon Anodes by Partial Oxidization Strategy with High-Performance Lithium-Ion Storage

Silicon (Si) is considered a promising anode material for rechargeable lithium-ion batteries (LIBs) due to its high theoretical capacity, low working potential, and safety features. However, the practical use of Si-based anodes is hampered by their huge volume expansion during the process of lithiation/delithiation, and they have relatively low intrinsic electronic conductivity, therefore seriously restricting their application in energy storage. Here, we propose a facile approach to directly transform siliceous biomass (bamboo leaves) into a porous carbon skeleton-wrapped Si nanodot architecture through a partial oxidization strategy and magnesium thermal reaction to obtain a high Si nanodot component composite (denoted as Si/C-O). With the synergistic effect of the porous carbon skeleton structure and uniformly dispersed Si nanodots, the Si/C-O composite anode with a stable structure that can avoid pulverization and accommodate volume expansion during cycling is fabricated. As expected, the biomass-converted Si/C-O anode not only presents a high Si component (59.7 wt %) by TGA but also exhibits an excellent capacity of 1013 mAh g^-1 at 0.5 A g^-1 and robust cycling stability with a capacity retention of 526 mAh g^-1 after 650 cycles. Moreover, the Si/C-O anode demonstrates considerable performance in practical LIBs when assembled with a commercial LiNi_0.8Co_0.1Mn_0.1O₂ cathode. This work provides an effective strategy and long-term insights into the utilization of porous Si-based materials converted by biomass to design and synthesize high-performance LIB materials.

Strategies for Controlling or Releasing the Influence Due to the Volume Expansion of Silicon inside Si-C Composite Anode for High-Performance Lithium-Ion Batteries

Currently, silicon is considered among the foremost promising anode materials, due to its high capacity, abundant reserves, environmental friendliness, and low working potential. However, the huge volume changes in silicon anode materials can pulverize the material particles and result in the shedding of active materials and the continual rupturing of the solid electrolyte interface film, leading to a short cycle life and rapid capacity decay. Therefore, the practical application of silicon anode materials is hindered. However, carbon recombination may remedy this defect. In silicon/carbon composite anode materials, silicon provides ultra-high capacity, and carbon is used as a buffer, to relieve the volume expansion of silicon; thus, increasing the use of silicon-based anode materials. To ensure the future utilization of silicon as an anode material in lithium-ion batteries, this review considers the dampening effect on the volume expansion of silicon particles by the formation of carbon layers, cavities, and chemical bonds. Silicon-carbon composites are classified herein as coated core-shell structure, hollow core-shell structure, porous structure, and embedded structure. The above structures can adequately accommodate the Si volume expansion, buffer the mechanical stress, and ameliorate the interface/surface stability, with the potential for performance enhancement. Finally, a perspective on future studies on Si-C anodes is suggested. In the future, the rational design of high-capacity Si-C anodes for better lithium-ion batteries will narrow the gap between theoretical research and practical applications.

Biomass-Based Silicon and Carbon for Lithium-Ion Battery Anodes

Lithium-ion batteries (LIBs) are the most preferred energy storage devices today for many high-performance applications. Recently, concerns about global warming and climate change have increased the need and requirements for LIBs used in electric vehicles, and thus more advanced technologies and materials are urgently needed. Among the anode materials under development, silicon (Si) has been considered the most promising anode candidate for the next generation LIBs to replace the widely used graphite. Si cannot be used as such as the electrode of LIB, and thus, carbon is commonly used to realize the applicability of Si in LIBs. Typically, this means forming a-Si/carbon composite (Si/C). One of the main challenges in the industrial development of high-performance LIBs is to exploit low-cost, environmentally benign, sustainable, and renewable chemicals and materials. In this regard, bio-based Si and carbon are favorable to address the challenge assuming that the performance of the LIB anode is not compromised. The present review paper focuses on the development of Si and carbon anodes derived from various types of biogenic sources, particularly from plant-derived biomass resources. An overview of the biomass precursors, process/extraction methods for producing Si and carbon, the critical physicochemical properties influencing the lithium storage in LIBs, and how they affect the electrochemical performance are highlighted. The review paper also discusses the current research challenges and prospects of biomass-derived materials in developing advanced battery materials.

Scalable Synthesis of Porous SiFe@C Composite with Excellent Lithium Storage

Utilizing cost-effective raw materials to prepare high-performance silicon-based anode materials for lithium-ion batteries (LIBs) is both challenging and attractive. Herein, a porous SiFe@C (pSiFe@C) composite derived from low-cost ferrosilicon is prepared via a scalable three-step procedure, including ball milling, partial etching, and carbon layer coating. The pSiFe@C material integrates the advantages of the mesoporous structure, the partially retained FeSi₂ conductive phase, and a uniform carbon layer (12-16 nm), which can substantially alleviate the huge volume expansion effect in the repeated lithium-ion insertion/extraction processes, effectively stabilizing the solid-electrolyte interphase (SEI) film and markedly enhancing the overall electronic conductivity of the material. Benefiting from the rational structure, the obtained pSiFe@C hybrid material delivers a reversible capacity of 1162.1 mAh g^-1 after 200 cycles at 500 mA g^-1 , with a higher initial coulombic efficiency of 82.30 %. In addition, it shows large discharge capacities of 803.1 and 600.0 mAh g^-1 after 500 cycles at 2 and 4 A g^-1 , respectively, manifesting an excellent electrochemical lithium storage. This work provides a good prospect for the commercial production of silicon-based anode materials for LIBs with a high lithium-storage capacity.