Cycling between Molybdenum‐Dinitrogen and ‐Nitride Complexes to Support the Reaction Pathway for Catalytic Formation of Ammonia from Dinitrogen

Catalytic Activity of Molybdenum Complexes Bearing PNP-Type Pincer Ligand toward Ammonia Formation

We newly designed and prepared a novel molybdenum complex bearing a 4-[3,5-bis(trifluoromethyl)phenyl]pyridine-based PNP-type pincer ligand, based on the bond dissociation free energies (BDFEs) of the N-H bonds in molybdenum-imide complexes bearing various substituted pyridine-based PNP-type pincer ligands. The complex worked as an excellent catalyst toward ammonia formation from the reaction of an atmospheric pressure of dinitrogen with samarium diiodide as a reductant and water as a proton source under ambient reaction conditions, where up to 3580 equivalents of ammonia were formed based on the molybdenum atom of the catalyst. The catalytic activity was significantly improved by one order of magnitude larger than that observed when using the complex before modification.

Design, synthesis and reactivity of dimolybdenum complex bearing quaterphenylene-bridged pyridine-based PNP-type pincer ligand

Dimolybdenum complexes bearing 3,3'''-(1,1':3',1'':3'',1'''-quaterphenylene)-bridged pyridine-based PNP-type pincer ligand are designed and prepared according to DFT calculations on the cleavage step of dinitrogen-bridged dimolybdenum complexes bearing polyphenylene-bridged pyridine-based PNP-type pincer ligands. The dimolybdenum complexes are found to work as effective catalysts toward ammonia formation from dinitrogen with samarium diiodide as a reductant and water as a proton source under ambient reaction conditions.

Electrocatalytic Nitrogen Reduction on a Molybdenum Complex Bearing a PNP Pincer Ligand

Electrocatalytic nitrogen reduction (N2R) mediated by well-defined molecular catalysts is poorly developed by comparison with other reductive electrocatalytic transformations. Herein, we explore the viability of electrocatalytic N2R mediated by a molecular Mo-PNP complex. A careful choice of acid, electrode material, and electrolyte mitigates electrode-mediated HER under direct electrolysis and affords up to 11.7 equiv of NH3 (Faradaic efficiency < 43%) at -1.89 V versus Fc+/Fc. The addition of a proton-coupled electron transfer (PCET) mediator has no effect. The data presented are rationalized by an initial electron transfer (ET) that sets the applied bias needed and further reveal an important impact of [Mo] concentration, thereby pointing to potential bimolecular steps (e.g., N2 splitting) as previously proposed during chemically driven N2R catalysis. Finally, facile reductive protonation of [Mo(N)Br(HPNP)] with pyridinium acids is demonstrated.

Catalytic nitrogen fixation using visible light energy

The synthesis of ammonia from atmospheric dinitrogen, nitrogen fixation, is one of the essential reactions for human beings. Because the current industrial nitrogen fixation depends on dihydrogen produced from fossil fuels as raw material, the development of a nitrogen fixation reaction that relies on the energy provided by renewable energy, such as visible light, is an important research goal from the viewpoint of sustainable chemistry. Herein, we establish an iridium- and molybdenum-catalysed process for synthesizing ammonia from dinitrogen under ambient reaction conditions and visible light irradiation. In this reaction system, iridium complexes and molybdenum triiodide complexes bearing N-heterocyclic carbene-based pincer ligands act as cooperative catalysts to activate 9,10-dihydroacridine and dinitrogen, respectively. The reaction of dinitrogen with 9,10-dihydroacridine is not thermodynamically favoured, and it only takes place under visible light irradiation. Therefore, the described reaction system is one that affords visible light energy-driven ammonia formation from dinitrogen catalytically.

Direct synthesis of cyanate anion from dinitrogen catalysed by molybdenum complexes bearing pincer-type ligand

Dinitrogen is an abundant and promising material for valuable organonitrogen compounds containing carbon-nitrogen bonds. Direct synthetic methods for preparing organonitrogen compounds from dinitrogen as a starting reagent under mild reaction conditions give insight into the sustainable production of valuable organonitrogen compounds with reduced fossil fuel consumption. Here we report the catalytic reaction for the formation of cyanate anion (NCO^-) from dinitrogen under ambient reaction conditions. A molybdenum-carbamate complex bearing a pyridine-based 2,6-bis(di-tert-butylphosphinomethyl)pyridine (PNP)-pincer ligand is synthesized from the reaction of a molybdenum-nitride complex with phenyl chloroformate. The conversion between the molybdenum-carbamate complex and the molybdenum-nitride complex under ambient reaction conditions is achieved. The use of samarium diiodide (SmI₂) as a reductant promotes the formation of NCO^- from the molybdenum-carbamate complex as a key step. As a result, we demonstrate a synthetic cycle for NCO^- from dinitrogen mediated by the molybdenum-PNP complexes in two steps. Based on this synthetic cycle, we achieve the catalytic synthesis of NCO^- from dinitrogen under ambient reaction conditions.

Terminal N2 Dissociation in [(PNN)Fe(N2 )]2 (μ-N2 ) Leads to Local Spin-State Changes and Augmented Bridging N2 Activation

Nitrogen fixation at iron centres is a fundamental catalytic step for N₂ utilisation, relevant to biological (nitrogenase) and industrial (Haber-Bosch) processes. This step is coupled with important electronic structure changes which are currently poorly understood. We show here for the first time that terminal dinitrogen dissociation from iron complexes that coordinate N₂ in a terminal and bridging fashion leaves the Fe-N₂ -Fe unit intact but significantly enhances the degree of N₂ activation (Δν≈180 cm^-1 , Raman spectroscopy) through charge redistribution. The transformation proceeds with local spin state change at the iron centre (S= 1 / 2 ${{ 1/2 }}$ →S=³ /₂ ). Further dissociation of the bridging N₂ can be induced under thermolytic conditions, triggering a disproportionation reaction, from which the tetrahedral (PNN)₂ Fe could be isolated. This work shows that dinitrogen activation can be induced in the absence of external chemical stimuli such as reducing agents or Lewis acids.

Catalytic Reduction of Dinitrogen into Ammonia and Hydrazine by Using Chromium Complexes Bearing PCP-Type Pincer Ligands

A series of chromium-halide, -nitride, and -dinitrogen complexes bearing carbene- and phosphine-based PCP-type pincer ligands has been newly prepared, and some of them are found to work as effective catalysts to reduce dinitrogen under atmospheric pressure, whereby up to 11.60 equiv. of ammonia and 2.52 equiv. of hydrazine (16.6 equiv. of fixed N atom) are produced based on the chromium atom. To the best of our knowledge, this is the first successful example of chromium-catalyzed conversion of dinitrogen to ammonia and hydrazine under mild reaction conditions.

Reactivity of molybdenum-nitride complex bearing pyridine-based PNP-type pincer ligand toward carbon-centered electrophiles

A molybdenum-nitride complex bearing a pyridine-based PNP-type pincer ligand derived from dinitrogen is reacted with various kinds of carbon-centered electrophiles to functionalize the nitride ligand in the molybdenum complex. Methylation with MeOTf and acylation with diphenylacetyl chloride of the nitride complex afford the corresponding imide complexes via a carbon-nitrogen bond formation. In the case of reactions with phenylisocyanate and diphenylketene, the PNP ligand works as a non-innocent ligand to form the corresponding ureate and acylimide complexes, respectively. These newly synthesized complexes are characterized by X-ray analysis. As a further transformation of the prepared imide complexes, hydrolysis of the molybdenum-acylimide complex proceeds to give the corresponding amide as an organonitrogen compound together with the corresponding molybdenum-oxo complex. This result indicates that the nitrogen molecule is converted into organic amide mediated by the molybdenum-nitride complex.

Mechanisms of Electrochemical N2 Splitting by a Molybdenum Pincer Complex

Molybdenum complexes supported by tridentate pincer ligands are exceptional catalysts for dinitrogen fixation using chemical reductants, but little is known about their prospects for electrochemical reduction of dinitrogen. The viability of electrochemical N₂ binding and splitting by a molybdenum(III) pincer complex, (^pyPNP)MoBr₃ (^pyPNP = 2,6-bis(^tBu₂PCH₂)-C₅H₃N)), is established in this work, providing a foundation for a detailed mechanistic study of electrode-driven formation of the nitride complex (^pyPNP)Mo(N)Br. Electrochemical kinetic analysis, optical and vibrational spectroelectrochemical monitoring, and computational studies point to two concurrent reaction pathways: In the reaction-diffusion layer near the electrode surface, the molybdenum(III) precursor is reduced by 2e^- and generates a bimetallic molybdenum(I) Mo₂(μ-N₂) species capable of N-N bond scission; and in the bulk solution away from the electrode surface, over-reduced molybdenum(0) species undergo chemical redox reactions via comproportionation to generate the same bimetallic molybdenum(I) species capable of N₂ cleavage. The comproportionation reactions reveal the surprising intermediacy of dimolybdenum(0) complex trans,trans-[(^pyPNP)Mo(N₂)₂](μ-N₂) in N₂ splitting pathways. The same "over-reduced" molybdenum(0) species was also found to cleave N₂ upon addition of lutidinium, an acid frequently used in catalytic reduction of dinitrogen.

Molybdenum-Mediated N2 -Splitting and Functionalization in the Presence of a Coordinated Alkyne

A new [PCCP]‐coordinated molybdenum platform comprising a coordinated alkyne was employed for the cleavage of molecular dinitrogen. The coordinated η²‐alkyne was left unaffected during this reduction. DFT calculations suggest that the reaction proceeds via an initially generated terminal N₂‐complex, which is converted to a dinuclear μ‐(η¹:η¹)‐N₂‐bridged intermediate prior to N−N bond cleavage. Protonation, alkylation and acylation of the resulting molybdenum nitrido complex led to the corresponding N‐functionalized imido complexes. Upon oxidation of the N‐acylated imido derivative in MeCN, a fumaronitrile fragment was built up via C−C coupling of MeCN to afford a dinuclear molybdenum complex. The key finding that the strong N≡N bond may be cleaved in the presence of a weaker, but spatially constrained C≡C bond contradicts the widespread paradigm that coordinated alkynes are in general more reactive than gaseous N₂.

Comprehensive insights into synthetic nitrogen fixation assisted by molecular catalysts under ambient or mild conditions

N2 is fixed as NH3 industrially by the Haber-Bosch process under harsh conditions, whereas biological nitrogen fixation is achieved under ambient conditions, which has prompted development of alternative methods to fix N2 catalyzed by transition metal molecular complexes. Since the early 21st century, catalytic conversion of N2 into NH3 under ambient conditions has been achieved by using molecular catalysts, and now H2O has been utilized as a proton source with turnover frequencies reaching the values found for biological nitrogen fixation. In this review, recent advances in the development of molecular catalysts for synthetic N2 fixation under ambient or mild conditions are summarized, and potential directions for future research are also discussed.

Catalytic conversion of nitrogen molecule into ammonia using molybdenum complexes under ambient reaction conditions

Nitrogen fixation using homogeneous transition metal complexes under mild reaction conditions is a challenging topic in the field of chemistry. Several successful examples of the catalytic conversion of nitrogen molecule into ammonia using various transition metal complexes in the presence of reductants and proton sources have been reported so far, together with detailed investigations on the reaction mechanism. Among these, only molybdenum complexes have been shown to serve as effective catalysts under ambient reaction conditions, in stark contrast with other transition metal-catalysed reactions that proceed at low reaction temperature such as -78 °C. In this feature article, we classify the molybdenum-catalysed reactions into four types: reactions via the Schrock cycle, reactions via dinuclear reaction systems, reactions via direct cleavage of the nitrogen-nitrogen triple bond of dinitrogen, and reactions via the Chatt-type cycle. We describe these catalytic systems focusing on the catalytic activity and mechanistic investigations. We hope that the present feature article provides useful information to develop more efficient nitrogen fixation systems under mild reaction conditions.