Cyclo-Ketal Xanthene Dyes: A New Class of Near-Infrared Fluorophores for Super-Resolution Imaging of Live Cells

Squaraine Dyes Exhibit Spontaneous Fluorescence Blinking That Enables Live-Cell Nanoscopy

Hampered by their susceptibility to nucleophilic attack and chemical bleaching, electron-deficient squaraine dyes have long been considered unsuitable for biological imaging. This study unveils a surprising twist: in aqueous environments, bleaching is not irreversible but rather a reversible spontaneous quenching process. Leveraging this new discovery, we introduce a novel deep-red squaraine probe tailored for live-cell super-resolution imaging. This probe enables single-molecule localization microscopy (SMLM) under physiological conditions without harmful additives or intense lasers and exhibits spontaneous blinking orchestrated by biological nucleophiles, such as glutathione or hydroxide anion. With a low duty cycle (∼0.1%) and high-emission rate (∼6 × 104 photons/s under 400 W/cm2), the squaraine probe surpasses the benchmark Cy5 dye by 4-fold and Si-rhodamine by a factor of 1.7 times. Live-cell SMLM with the probe reveals intricate structural details of cell membranes, which demonstrates the high potential of squaraine dyes for next-generation super-resolution imaging.

Coerulein B: a water-soluble and water-compatible near-infrared photoredox catalyst

The recent expansion of photoredox catalysis into chemical biology has underscored the importance of photochemistry, attracting the attention of many researchers. On the other hand, as conventional photoredox catalysts were developed for organic synthesis, there is a necessity to develop biocompatible photoredox catalysts. Here, we show a water-soluble and water-compatible near-infrared (NIR) photoredox catalyst, coerulein B (CB). CB is a water-soluble molecule with a slightly twisted molecular structure, and its anionic species (CB-) exhibits NIR absorption and emission. We demonstrated that CB works as a water-compatible photoredox catalyst in the coupling reaction of pyridine hydrochloride and aryldiazonium salt. These results indicate that CB is one of the promising candidates for photocatalysts used in biological reactions.

Molecular Engineering of Sulfone-Xanthone Chromophore for Enhanced Fluorescence Navigation

Enriching the palette of high-performance fluorescent dyes is vital to support the frontier of biomedical imaging. Although various rhodamine skeletons remain the premier type of small-molecule fluorophores due to the apparent high brightness and flexible modifiability, they still suffer from the inherent defect of small Stokes shift due to the nonideal fluorescence imaging signal-to-background ratio. Especially, the rising class of fluorescent dyes, sulfone-substituted xanthone, exhibits great potential, but low chemical stability is also pointed out as the problem. Molecular engineering of sulfone-xanthone to obtain a large Stokes shift and high stability is highly desired, but it is still scarce. Herein, we present the combination modification method for optimizing the performance of sulfone-xanthone. These redesigned fluorescent skeletons owned greatly improved stability and Stokes shift compared with the parent sulfone-rhodamine. To the proof of bioimaging capacity, annexin protein-targeted peptide LS301 was introduced to the most promising dyes, J-S-ARh, to form the tumor-targeted fluorescent probe, J-S-LS301. The resulting probe, J-S-LS301, can be an outstanding fluorescence tool for the orthotopic transplantation tumor model of hepatocellular carcinoma imaging and on-site pathological analysis. In summary, the combination method could serve as a basis for rational optimization of sulfone-xanthone. Overall, the chemistry reported here broadens the scope of accessible sulfone-xanthone functionality and, in turn, enables to facilitate the translation of biomedical research toward the clinical domain.

Xanthene, cyanine, oxazine and BODIPY: the four pillars of the fluorophore empire for super-resolution bioimaging

In the realm of biological research, the invention of super-resolution microscopy (SRM) has enabled the visualization of ultrafine sub-cellular structures and their functions in live cells at the nano-scale level, beyond the diffraction limit, which has opened up a new window for advanced biomedical studies to unravel the complex unknown details of physiological disorders at the sub-cellular level with unprecedented resolution and clarity. However, most of the SRM techniques are highly reliant on the personalized special photophysical features of the fluorophores. In recent times, there has been an unprecedented surge in the development of robust new fluorophore systems with personalized features for various super-resolution imaging techniques. To date, xanthene, cyanine, oxazine and BODIPY cores have been authoritatively utilized as the basic fluorophore units in most of the small-molecule-based organic fluorescent probe designing strategies for SRM owing to their excellent photophysical characteristics and easy synthetic acquiescence. Since the future of next-generation SRM studies will be decided by the availability of advanced fluorescent probes and these four fluorescent building blocks will play an important role in progressive new fluorophore design, there is an urgent need to review the recent advancements in designing fluorophores for different SRM methods based on these fluorescent dye cores. This review article not only includes a comprehensive discussion about the recent developments in designing fluorescent probes for various SRM techniques based on these four important fluorophore building blocks with special emphasis on their effective integration into live cell super-resolution bio-imaging applications but also critically evaluates the background of each of the fluorescent dye cores to highlight their merits and demerits towards developing newer fluorescent probes for SRM.

Fluorogenic In Situ Thioacetalization: Expanding the Chemical Space of Fluorescent Probes, Including Unorthodox, Bifurcated, and Mechanosensitive Chalcogen Bonds

Progress with fluorescent flippers, small-molecule probes to image membrane tension in living systems, has been limited by the effort needed to synthesize the twisted push-pull mechanophore. Here, we move to a higher oxidation level to introduce a new design paradigm that allows the screening of flipper probes rapidly, at best in situ. Late-stage clicking of thioacetals and acetals allows simultaneous attachment of targeting units and interfacers and exploration of the critical chalcogen-bonding donor at the same time. Initial studies focus on plasma membrane targeting and develop the chemical space of acetals and thioacetals, from acyclic amino acids to cyclic 1,3-heterocycles covering dioxanes as well as dithiolanes, dithianes, and dithiepanes, derived also from classics in biology like cysteine, lipoic acid, asparagusic acid, DTT, and epidithiodiketopiperazines. From the functional point of view, the sensitivity of membrane tension imaging in living cells could be doubled, with lifetime differences in FLIM images increasing from 0.55 to 1.11 ns. From a theoretical point of view, the complexity of mechanically coupled chalcogen bonding is explored, revealing, among others, intriguing bifurcated chalcogen bonds.

Photochemical Mechanisms of Fluorophores Employed in Single-Molecule Localization Microscopy

Decoding cellular processes requires visualization of the spatial distribution and dynamic interactions of biomolecules. It is therefore not surprising that innovations in imaging technologies have facilitated advances in biomedical research. The advent of super-resolution imaging technologies has empowered biomedical researchers with the ability to answer long-standing questions about cellular processes at an entirely new level. Fluorescent probes greatly enhance the specificity and resolution of super-resolution imaging experiments. Here, we introduce key super-resolution imaging technologies, with a brief discussion on single-molecule localization microscopy (SMLM). We evaluate the chemistry and photochemical mechanisms of fluorescent probes employed in SMLM. This Review provides guidance on the identification and adoption of fluorescent probes in single molecule localization microscopy to inspire the design of next-generation fluorescent probes amenable to single-molecule imaging.

The pursuit of xanthenoid fluorophores with near-infrared-II emission for in vivo applications

As fluorescence imaging in the second near-infrared window (NIR-II, 1000-1700 nm) has gained increasing attention, it is inevitable that NIR-II fluorophores, the cornerstone of NIR-II imaging, have come to the middle of the stage. NIR-II xanthenoid fluorophores with good stability, high brightness, and fluorescence adjustability are becoming popular. We here reviewed the recent progress of xanthenoid fluorophores with NIR-II emission for in vivo applications. Especially, we focus on the strategies used for longer wavelength and fluorescence regulation to construct OFF-ON or ratiometric NIR-II fluorescent probes.

A long-lived charge-separated state of spiro compact electron donor-acceptor dyads based on rhodamine and naphthalenediimide chromophores

Spiro rhodamine (Rho)-naphthalenediimide (NDI) electron donor-acceptor orthogonal dyads were prepared to generate a long-lived charge separation (CS) state based on the electron spin control approach, i.e. to form the ³CS state, not the ¹CS state, to prolong the CS state lifetime by the electron spin forbidden feature of the charge recombination process of ³CS → S₀. The electron donor Rho (lactam form) is attached via three σ bonds, including two C-C and one N-N bonds (Rho-NDI), or an intervening phenylene, to the electron acceptor NDI (Rho-Ph-NDI and Rho-PhMe-NDI). Transient absorption (TA) spectra show that fast intersystem crossing (ISC) (<120 fs) occurred to generate an upper triplet state localized on the NDI moiety (³NDI*), and then to form the CS state. For Rho-NDI in both non-polar and polar solvents, a long-lived ³CS state (lifetime τ = 0.13 μs) and charge separation quantum yield (Φ _CS) up to 25% were observed, whereas for Rho-Ph-NDI (τ _T = 1.1 μs) and Rho-PhMe-NDI (τ _T = 2.0 μs), a low-lying ³NDI* state was formed by charge recombination (CR) in n-hexane (HEX). In toluene (TOL), however, CS states were observed for Rho-Ph-NDI (0.37 μs) and Rho-PhMe-NDI (0.63 μs). With electron paramagnetic resonance (EPR) spectra, weak electronic coupling between the Rho and NDI moieties for Rho-NDI was proved. Time-resolved EPR (TREPR) spectra detected two transient species including NDI-localized triplets (formed via SOC-ISC) and a ³CS state. The CS state of Rho-NDI features the largest dipolar interaction (|D| = 184 MHz) compared to Rho-Ph-NDI (|D| = 39 MHz) and Rho-PhMe-NDI (|D| = 41 MHz) due to the smallest distance between Rho and NDI moieties. For Rho-NDI, the time-dependent e,a → a,e phase change of the CS state TREPR spectrum indicates that the long-lived CS state is based on the electron spin control effect.

Outer Surface-Labeled Bacteria as Live Sensors Accurately Quantitating Interfacial pH: A Smart Technique for Antimicrobial Resistance

The techniques to quantitatively monitor environmental factors surrounding the bacterial outer surface rather than the host's subcellular regions (e.g., lysosomes) should be the key to evaluate bacterial immune escape behavior. We report wild Staphylococcus aureus (SA) and methicillin-resistant Staphylococcus aureus (MRSA) labeled with a fluorescent resonance energy transfer probe, 4SR-L-BDP, on their outer surfaces as smart live sensors to quantify interfacial pH. The dual emission of 4SR-L-BDP affords high sensitivity to pH change in a ratiometric way in the pH range of 4-8 with high precision. Notably, 4SR-L-BDP possesses an anchoring group to fix on the bacterial surface for sensing the microenvironment encountered. Super-resolution imaging clearly demonstrates the specific labeling of bacterial membranes. These live sensors are applied in two-channel ratiometric imaging to dynamically visualize and quantify their interfacial pH changes during infection of macrophages. It is found that the interfacial pH of MRSA is lower by 0.2 units compared to that of SA. Such small but critical difference in pH reflects MRSA's ability to adapt to microenvironmental pH inside macrophages. These labeled bacteria as live sensors are also proven to be practically applicable in mice models with immune deficiency and immune activation.

A multicomponent reaction platform towards multimodal near-infrared BODIPY dyes for STED and fluorescence lifetime imaging

We report a platform combining multicomponent reaction synthesis and automated cell-based screening to develop biocompatible NIR-BODIPY fluorophores. From a library of over 60 fluorophores, we optimised compound NIRBD-62c as a multimodal probe with suitable properties for STED super-resolution and fluorescence lifetime imaging. Furthermore, we employed NIRBD-62c for imaging trafficking inside cells and to examine how pharmacological inhibitors can alter the vesicular traffic between intracellular compartments and the plasma membrane.

Ketone Incorporation Extends the Emission Properties of the Xanthene Scaffold Beyond 1000 nm

Imaging in the shortwave-infrared region (SWIR, λ = 1000-2500 nm) has the potential to enable deep tissue imaging with high resolution. Critical to the development of these methods is the identification of low molecular weight, biologically compatible fluorescent probes that emit beyond 1000 nm. Exchanging the bridging oxygen atom on the xanthene scaffold (C10' position) with electron withdrawing groups has been shown to lead to significant redshifts in absorbance and emission. Guided by quantum chemistry computational modeling studies, we investigated the installation of a ketone bridge at the C10' position. This simple modification extends the absorbance maxima to 860 nm and the emission beyond 1000 nm, albeit with reduced photon output. Overall, these studies demonstrate that broadly applied xanthene dyes can be extended into the SWIR range.

Dihydro-Si-rhodamine for live-cell localization microscopy

Fluorophores with photo-modulatory fluorescence properties are valuable for cutting-edge localization microscopy. The existing probes are either photo-activatable, or photo-switchable, but not both. We report a probe (DH-SiR), a leuco-dye obtained by reduction of Si-rhodamine, with both photo-activatable and photo-switchable fluorescence. The potential for super-resolution microscopy was showcased.

Late-stage functionalisation of alkyne-modified phospha-xanthene dyes: lysosomal imaging using an off-on-off type of pH probe

Near-infrared (NIR) fluorescent molecules are of great importance for the visualisation of biological processes. Among the most promising dye scaffolds for this purpose are P[double bond, length as m-dash]O-substituted phospha-xanthene (POX) dyes, which show NIR emission with high photostability. Their practical utility for in vitro and in vivo imaging has recently been demonstrated. Although classical modification methods have been used to produce POX-based fluorescent probes, it is still a challenge to introduce additional functional groups to control the localisation of the probe in cells. Herein, we report on the development of POXs that bear a 4-ethynylphenyl group on the phosphorus atom. These dyes can subsequently be functionalised with azide-tagged biomolecules via a late-stage Cu-catalysed azide/alkyne cycloaddition (CuAAC) reaction, thus achieving target-selective labelling. To demonstrate the practical utility of the functionalised POXs, we designed a sophisticated NIR probe that exhibits a bell-shaped off-on-off pH-response and is able to assess the degree of endosomal maturation.