Soluble Congeners of Prior Insoluble Shape-Persistent Imine Cages

A Chiral [2+3] Covalent Organic Cage Based on 1,1'-Bi-2-naphthol (BINOL) Units

A [2+3] chiral covalent organic cage is produced through a dynamic covalent chemistry approach by mixing two readily available building units, viz. an enantiopure 3,3'-diformyl 2,2'-BINOL compound (A) with a triamino spacer (B). The two enantiomeric (R,R,R) and (S,S,S) forms of the cage C are formed nearly quantitatively thanks to the reversibility of the imine linkage. The X-ray diffraction analysis of cage (S,S,S)-C highlights that the six OH functions of the BINOL fragments are positioned inside the cage cavity. Upon reduction of the imine bonds of cage C, the amine cage D is obtained. The ability of the cage D to host the 1-phenylethylammonium cation (EH+) as a guest is evaluated through UV, CD and DOSY NMR studies. A higher binding constant for (R)-EH+ cation (Ka=1.7 106±10 % M-1) related to (S)-EH+ (Ka=0.9 106±10 % M-1) is determined in the presence of the (R,R,R)-D cage. This enantiopreference is in close agreement with molecular dynamics simulation.

Single Crystals of Insoluble Porous Salicylimine Cages

Porous organic cages (POCs) are meanwhile an established class of porous materials. Most of them are soluble to a certain extend and thus processable in or from solution. However, a few of larger salicylimine cages were reported to be insoluble in any organic solvents and thus characterized as amorphous materials. These cages were now synthesized as single-crystalline materials to get insight into packing motifs and preferred intermolecular interactions. Furthermore, the pairs of crystalline and amorphous materials for each cage allowed to compare their gas-sorption properties in both morphological states.

Reversible Macrocycle-to-Macrocycle Interconversion Driven by Solvent Selection

Macrocycle-to-macrocycle interconversions are of interest because they can allow access to a variety of structures. However, reversible interconversion between different sized macrocycles remains challenging to control. Herein, we report a facile one-pot synthesis of a series of self-assembled macrocycles from readily prepared α,α'-linked oligopyrrolic dialdehydes and various alkyl diamines. The condensation of pyridine-bridged oligopyrrolic dialdehyde 3 and simple alkyl diamines proved independent of solvent, always yielding the [2 + 2] macrocyclic products. However, when 3 was condensed with 2,2'-oxybis(ethylamine) 14, either ([1 + 1] or [2 + 2]) products are obtained depending on the choice of solvent. Reaction of 3 and 14 in methanol, ethanol, or chloroform gave the [1 + 1] macrocycle as the sole product. In contrast, condensation of 3 and 14 in dimethyl sulfoxide (DMSO), N,N-dimethylformamide (DMF), or acetonitrile (MeCN) yielded the [2 + 2] macrocycle as the major product in the form of a precipitate. Reversible interconversion between the [1 + 1] and [2 + 2] macrocycles could be achieved by tuning the solvent, with the ratio driven by thermodynamic and solubility considerations.

Solvent-Controlled Quadruple Catenation of Giant Chiral [8+12] Salicylimine Cubes Driven by Weak Hydrogen Bonding

Mechanically interlocked structures are fascinating synthetic targets and the topological complexity achieved through catenation offers numerous possibilities for the construction of new molecules with exciting properties. In the structural space of catenated organic cage molecules, only few examples have been realized so far, and control over the catenation process in solution is still barely achieved. Herein, we describe the formation of a quadruply interlocked catenane of giant chiral [8+12] salicylimine cubes. The formation could be controlled by the choice of solvent used in the reaction. The interlocked structure was unambiguously characterized by single crystal X-ray diffraction and weak hydrogen bonding was identified as a central driving force for the catenation. Furthermore, scrambling experiments using partially deuterated cages were performed, revealing that the catenane formation occurs through mechanical interlocking of preformed single cages.

Dimeric and trimeric catenation of giant chiral [8 + 12] imine cubes driven by weak supramolecular interactions

Mechanically interlocked structures, such as catenanes and rotaxanes, are fascinating synthetic targets and some are used for molecular switches and machines. Today, the vast majority of catenated structures are built upon macrocycles and only a very few examples of three-dimensional shape-persistent organic cages forming such structures have been reported. However, the catenation in all these cases was based on a thermodynamically favoured π-π-stacking under certain reaction conditions. Here, we show that catenane formation can be induced by adding methoxy or thiomethyl groups to one of the precursors during the synthesis of chiral [8 + 12] imine cubes, giving dimeric and trimeric catenated organic cages. To elucidate the underlying driving forces, we reacted 11 differently 1,4-disubstituted terephthaldehydes with a chiral triamino tribenzotriquinacene under various conditions to study whether monomeric cages or catenated cage dimers are the preferred products. We find that catenation is mainly directed by weak interactions derived from the substituents rather than by π-stacking.

Metallocavitins as Advanced Enzyme Mimics and Promising Chemical Catalysts

The supramolecular approach is becoming increasingly dominant in biomimetics and chemical catalysis due to the expansion of the enzyme active center idea, which now includes binding cavities (hydrophobic pockets), channels and canals for transporting substrates and products. For a long time, the mimetic strategy was mainly focused on the first coordination sphere of the metal ion. Understanding that a highly organized cavity-like enzymatic pocket plays a key role in the sophisticated functionality of enzymes and that the activity and selectivity of natural metalloenzymes are due to the effects of the second coordination sphere, created by the protein framework, opens up new perspectives in biomimetic chemistry and catalysis. There are two main goals of mimicking enzymatic catalysis: (1) scientific curiosity to gain insight into the mysterious nature of enzymes, and (2) practical tasks of mankind: to learn from nature and adopt from its many years of evolutionary experience. Understanding the chemistry within the enzyme nanocavity (confinement effect) requires the use of relatively simple model systems. The performance of the transition metal catalyst increases due to its retention in molecular nanocontainers (cavitins). Given the greater potential of chemical synthesis, it is hoped that these promising bioinspired catalysts will achieve catalytic efficiency and selectivity comparable to and even superior to the creations of nature. Now it is obvious that the cavity structure of molecular nanocontainers and the real possibility of modifying their cavities provide unlimited possibilities for simulating the active centers of metalloenzymes. This review will focus on how chemical reactivity is controlled in a well-defined cavitin nanospace. The author also intends to discuss advanced metal–cavitin catalysts related to the study of the main stages of artificial photosynthesis, including energy transfer and storage, water oxidation and proton reduction, as well as highlight the current challenges of activating small molecules, such as H2O, CO2, N2, O2, H2, and CH4.

[2+3] Amide Cages by Oxidation of [2+3] Imine Cages – Revisiting Molecular Hosts for Highly Efficient Nitrate Binding

The pollution of groundwater with nitrate is a serious issue because nitrate can cause several diseases such as methemoglobinemia or cancer. Therefore, selective removal of nitrate by efficient binding to supramolecular hosts is highly desired. Here we describe how to make [2+3] amide cages in very high to quantitative yields by applying an optimized Pinnick oxidation protocol for the conversion of corresponding imine cages. By NMR titration experiments of the eight different [2+3] amide cages with nitrate, chloride and hydrogen sulfate we identified one cage with an unprecedented high selectivity towards nitrate binding vs. chloride (S=705) or hydrogensulfate (S>13500) in CD₂Cl₂/CD₃CN (1 : 3). NMR experiments as well as single‐crystal structure comparison of host‐guest complexes give insight into structure‐property‐relationships.

Purely Covalent Molecular Cages and Containers for Guest Encapsulation

Cage compounds offer unique binding pockets similar to enzyme-binding sites, which can be customized in terms of size, shape, and functional groups to point toward the cavity and many other parameters. Different synthetic strategies have been developed to create a toolkit of methods that allow preparing tailor-made organic cages for a number of distinct applications, such as gas separation, molecular recognition, molecular encapsulation, hosts for catalysis, etc. These examples show the versatility and high selectivity that can be achieved using cages, which is impossible by employing other molecular systems. This review explores the progress made in the field of fully organic molecular cages and containers by focusing on the properties of the cavity and their application to encapsulate guests.

Metallocavitins as Promising Industrial Catalysts: Recent Advances

The energy, material, and environmental problems of society require clean materials and impose an urgent need to develop effective chemical processes for obtaining and converting energy to ensure further sustainable development. To solve these challenges, it is necessary, first of all, to learn solar energy harvesting through the development of artificial photosynthesis. In our planet, water, carbon dioxide, and methane are such affordable and inexhaustible clean materials. Electro/photocatalytic water splitting, and also CO₂ and CH₄ transforming into valuable products, requires the search for relevant efficient and selective processes and catalysts. Of great interest is the emerging new generation of bioinspired catalysts—metallocavitins (MCs). MCs are attracting increasing attention of researchers as advanced models of metalloenzymes, whose efficiency and selectivity are well known. The primary field of MC application is fine organic synthesis and enantioselective catalysis. On the other hand, MCs demonstrate high activity for energy challenging reactions involving small gas molecules and high selectivity for converting them into valuable products. This mini-review will highlight some recent advances in the synthesis of organic substances using MCs, but its main focus will be on the rapid development of advanced catalysts for the activation of small molecules, such as H₂O, CO₂, and CH₄, and the prospects for creating related technological processes in the future.

Soluble Congeners of Prior Insoluble Shape-Persistent Imine Cages

One of the most applied reaction types to synthesize shape‐persistent organic cage compounds is the imine condensation reaction and it is assumed that the formed cages are thermodynamically controlled products due to the reversibility of the imine condensation. However, most of the synthesized imine cages reported are formed as precipitate from the reaction mixture and therefore rather may be kinetically controlled products. There are even examples in literature, where resulting cages are not soluble at all in common organic solvents to characterize or study their formation by NMR spectroscopy in solution. Here, a triptycene triamine containing three solubilizing n‐hexyloxy chains has been used to synthesize soluble congeners of prior insoluble cages. This allowed us to study the formation as well as the reversibility of cage formation in solution by investigating exchange of building blocks between the cages and deuterated derivatives thereof.