[Ni(NHC)2 ] as a Scaffold for Structurally Characterized trans [H-Ni-PR2 ] and trans [R2 P-Ni-PR2 ] Complexes

Nickel-Catalyzed Enantioselective Alkylation of Primary Phosphines

Functional molecules derived from stereogenic phosphorus centers have important applications in the discovery of drugs and agrochemicals. They are also widely utilized as chiral ligands or organocatalysts for diverse asymmetric transformations. However, access to P-stereogenic motifs has always been regarded as a highly challenging yet desirable goal in organic synthesis. The development of general and practical methods for the stereoselective construction of synthetically versatile P(III)-stereogenic phosphines is particularly appealing but remains elusive. Herein, we describe a nickel-catalyzed asymmetric alkylation of primary phosphines with alkyl halides for the synthesis of P-stereogenic secondary phosphine-boranes with high enantioselectivity and broad substrate scope. The resulting optically active secondary phosphine-boranes allow for further stereospecific transformations, thereby establishing a modular and efficient platform for the diversity-oriented construction of P-stereogenic phosphine compounds.

Synthesis and Characterization of a Terminal Iron(II)-PH2 Complex and a Series of Iron(II)-PH3 Complexes

Reported is the reaction of a series of iron(II) bisphosphine complexes with PH3 in the presence of NaBArF4 [where BArF4 = tetrakis(3,5-bis(trifluoromethyl)phenyl)borate]. The iron(II) bisphosphine reagents bear two chlorides or a hydride and a chloride motif. We have isolated six different cationic terminal-bound PH3 complexes and undertaken rigorous characterization by NMR spectroscopy, single crystal X-ray diffraction, and mass spectrometry, where the PH3 often remains intact during the ionization process. Unusual bis- and tris-PH3 complexes are among the compounds isolated. Changing the monophosphine from PH3 to PMe3 results in the formation of an unusual Fe7 cluster, but with no PMe3 being ligated. Finally, by using an iron(0) source, we have provided a rare example of a terminally bound iron-PH2 complex.

Isolation and Reactivity of Homoleptic Diphosphene Lead Complexes

Due to their limited capacity for π-backdonation, isolation of π-complexes of main-group elements remains a great challenge. We report herein the synthesis of a homoleptic diphosphene lead complex (2) from the degradation of P4 with a bis(germylene)-stabilized Pb(0) complex. Structural and computational studies showed that 2 possesses significant π bonding interactions between Pb atom and diphosphene ligands, which is reminiscent of transition-metal diphosphene complexes. Consistent with its unique electronic structure, complex 2 can deliver Pb(0) atoms to perform redox reaction with an iminoquinone to produce a cyclic plumbylene (4) and perform 2,5-dimethyl-3,4-dimethylimidazol-1-ylidene (IMe2 Me2 ) induced phosphorus cation abstraction to give an anionic PbP3 complex (6).

On the Reactivity of a NHC Nickel Bis-Boryl Complex: Reductive Elimination and Formation of Mono-Boryl Complexes

The synthesis of the first terminal mono-boryl complexes of nickel, which are not stabilized by a pincer ligand, is reported. The reaction of the nickel bis-boryl complex cis-[Ni(i Pr2 ImMe )2 (Bcat)2 ] 1 (cat=1,2-O2 C6 H4 ) with the small donor ligand PMe3 led to a complete ligand exchange at nickel with reductive elimination of B2 cat2 and formation of the bis-NHC adduct [B2 cat2  ⋅ (i Pr2 ImMe )2 ] 3 and [Ni(PMe3 )4 ] 2 as the metal-containing species. Electrophilic attack of MeI on complex 1 or ligand dismutation of 1 with trans-[Ni(i Pr2 ImMe )2 Br2 ] led to loss of only one boryl ligand of 1 and afforded the nickel mono-boryl complexes trans-[Ni(i Pr2 ImMe )2 (Bcat)Br] 4 a and trans-[Ni(i Pr2 ImMe )2 (Bcat)I] 4 b.

Room temperature stable E,Z-diphosphenes: their isomerization, coordination, and cycloaddition chemistry

E,Z-isomers display distinct physical properties and chemical reactivities. However, investigations on heavy main group elements remain limited. In this work, we present the isolation and X-ray crystallographic characterization of N-heterocyclic vinyl (NHV) substituted diphosphenes as both E- and Z-isomers (L[double bond, length as m-dash]CH-P[double bond, length as m-dash]P-CH[double bond, length as m-dash]L, E,Z-2b; L = N-heterocyclic carbene). E-2b is thermodynamically more stable and undergoes reversible photo-stimulated isomerization to Z-2b. The less stable Z-isomer Z-2b can be thermally reverted to E-2b. Theoretical studies support the view that this E ↔ Z isomerization proceeds via P[double bond, length as m-dash]P bond rotation, reminiscent of the isomerization observed in alkenes. Furthermore, both E,Z-2b coordinate to an AuCl fragment affording the complex [AuCl(η2-Z-2b)] with the diphosphene ligand in Z-conformation, exclusively. In contrast, E,Z-2b undergo [2 + 4] and [2 + 1] cycloadditions with dienes or diazo compounds, respectively, yielding identical cycloaddition products in which the phosphorus bound NHV groups are in trans-position to each other. DFT calculations provide insight into the E/Z-isomerisation and stereoselective formation of Au(i) complexes and cycloaddition products.

N-Heterocyclic carbene and cyclic (alkyl)(amino)carbene ligated half-sandwich complexes of chromium(II) and chromium(I)

The synthesis and characterization of a series of Cr(II) N-Heterocyclic Carbene (NHC) complexes of the type [{Cr(NHC)Cl(μ-Cl)}2] and [(Cyp)Cr(NHC)X] (Cyp = η5-C5H5, cyclopentadienyl; η5-C5Me5, pentamethylcyclopentadienyl; X = Cl, η3-C3H5; NHC = IMeMe, IiPrMe, IMes, IDipp) as well as the cyclic (alkyl)(amino)carbene cAACMe ligated complexes [(η5-C5H5)Cr(cAACMe)X] (X = Cl, NPh2), [(η5-C9H7)Cr(cAACMe)Cl] (C9H7 = Ind, indenyl) and [(η5-C13H9)Cr(cAACMe)Cl] (C13H9 = Fl, fluorenyl) are reported. The reduction of [(η5-C5Me5)Cr(IMeMe)Cl] with KC8 in the presence of CO afforded the NHC ligated Cr(I) metallo-radical [(η5-C5Me5)Cr(IMeMe)(CO)2]. Quantum chemical calculations performed on [(η5-C5Me5)Cr(IMeMe)(CO)2] confirm for this complex a predominantly chromium centered radical.

Nickel boryl complexes and nickel-catalyzed alkyne borylation

The first nickel bis-boryl complexes cis-[Ni( ⁱ Pr₂Im^Me)₂(Bcat)₂], cis-[Ni( ⁱ Pr₂Im^Me)₂(Bpin)₂] and cis-[Ni( ⁱ Pr₂Im^Me)₂(Beg)₂] are reported, which were prepared via the reaction of a source of [Ni( ⁱ Pr₂Im^Me)₂] with the diboron(4) compounds B₂cat₂, B₂pin₂ and B₂eg₂ ( ⁱ Pr₂Im^Me = 1,3-di-iso-propyl-4,5-dimethylimidazolin-2-ylidene; B₂cat₂ = bis(catecholato)diboron; B₂pin₂ = bis(pinacolato)diboron; B₂eg₂ = bis(ethylene glycolato)diboron). X-ray diffraction and DFT calculations strongly suggest that a delocalized, multicenter bonding scheme dictates the bonding situation of the NiB₂ moiety in these square planar complexes, reminiscent of the bonding situation of "non-classical" H₂ complexes. [Ni( ⁱ Pr₂Im^Me)₂] also efficiently catalyzes the diboration of alkynes using B₂cat₂ as the boron source under mild conditions. In contrast to the known platinum-catalyzed diboration, the nickel system follows a different mechanistic pathway, which not only provides the 1,2-borylation product in excellent yields, but also provides an efficient approach to other products such as C-C coupled borylation products or rare tetra-borylated compounds. The mechanism of the nickel-catalyzed alkyne borylation was examined by means of stoichiometric reactions and DFT calculations. Oxidative addition of the diboron reagent to nickel is not dominant; the first steps of the catalytic cycle are coordination of the alkyne to [Ni( ⁱ Pr₂Im^Me)₂] and subsequent borylation at the coordinated and, thus, activated alkyne to yield complexes of the type [Ni(NHC)₂(η²-cis-(Bcat)(R)C[double bond, length as m-dash]C(R)(Bcat))], exemplified by the isolation and structural characterization of [Ni( ⁱ Pr₂Im^Me)₂(η²-cis-(Bcat)(Me)C[double bond, length as m-dash]C(Me)(Bcat))] and [Ni( ⁱ Pr₂Im^Me)₂(η²-cis-(Bcat)(H₇C₃)C[double bond, length as m-dash]C(C₃H₇)(Bcat))].

Three-Electron Nickel(I)/Nickel(0) Half-Bond

An (N-heterocyclic carbene)nickel(I) cation precursor reacts with the corresponding nickel(0) complex to form a dinickel(I,0) monocation. The Ni···Ni distance in this cation is 0.93 Å shorter than in the analogous dinickel(0) complex. Although the solid-state structure shows equivalent Ni centers, density functional theory calculations indicate significant electronic localization. Reactions with CO and NO form mononuclear carbonyl and nitrosyl complexes. Oxidative addition of an aryl bromide results in C-arylation of the carbene ligands.

N-Heterocyclic carbene and cyclic (alkyl)(amino)carbene complexes of vanadium(III) and vanadium(V)

[VCl₃(THF)₃] offers a convenient entrance point into the chemistry of carbene stabilized V(III) complexes. Herein we report the paramagnetic mono- and biscarbene complexes [VCl₃(cAAC^Me)] 1, [VCl₃(cAAC^Me)(THF)] 1(thf), [VCl₃(IMes)] 2, [{VCl₂(IiPr^Me)(μ-Cl)}₂] 3, [VCl₃(IDipp)] 4, [VCl₃(SIDipp)] 5, [VCl₃(SIDipp)(THF)] 5(thf), [VCl₃(ItBu)] 6, [VCl₃(cAAC^Me)₂] 7 and [VCl₃(IiPr^Me)₂] 8. Reaction of 1 with MesMgCl, MesLi and LiNPh₂ afforded the complexes [VCl₂(Mes)(cAAC^Me)] 9, [cAAC^MeH]⁺[VCl₂Mes₂]^-10 and [VCl₂(NPh₂)(cAAC^Me)] 11. The V(V) complexes [V(O)Cl₃(IDipp)] 12 and [V(O)Cl₃(SIDipp)] 13 were selectively prepared from oxygen oxidation of 4 and 5. [V(O)Cl₃(IDipp)] 12 and [V(O)Cl₃(IMes)] react with isocyanates to yield the NHC-ligated imido complexes [V(N-p-CH₃C₆H₄)Cl₃(IDipp)] 14, [V(N-p-FC₆H₄)Cl₃(IDipp)] 15, [V(N-p-CH₃C₆H₄)Cl₃(SIDipp)] 16, [V(N-p-FC₆H₄)Cl₃(SIDipp)] 17, [V(N-p-CH₃C₆H₄)Cl₃(IMes)] 18 and [V(N-p-FC₆H₄)Cl₃(IMes)] 19.

Case Study of N-i Pr versus N-Mes Substituted NHC Ligands in Nickel Chemistry: The Coordination and Cyclotrimerization of Alkynes at [Ni(NHC)2 ]

A case study on the effect of the employment of two different NHC ligands in complexes [Ni(NHC)₂] (NHC=ⁱPr₂Im^Me1^Me, Mes₂Im 2) and their behavior towards alkynes is reported. The reaction of a mixture of [Ni₂(ⁱPr₂Im^Me)₄(μ‐(η² : η²)‐COD)] B/ [Ni(ⁱPr₂Im^Me)₂(η⁴‐COD)] B’ or [Ni(Mes₂Im)₂] 2, respectively, with alkynes afforded complexes [Ni(NHC)₂(η²‐alkyne)] (NHC=ⁱPr₂Im^Me: alkyne=MeC≡CMe 3, H₇C₃C≡CC₃H₇4, PhC≡CPh 5, MeOOCC≡CCOOMe 6, Me₃SiC≡CSiMe₃7, PhC≡CMe 8, HC≡CC₃H₇9, HC≡CPh 10, HC≡C(p‐Tol) 11, HC≡C(4‐^tBu‐C₆H₄) 12, HC≡CCOOMe 13; NHC=Mes₂Im: alkyne=MeC≡CMe 14, MeOOCC≡CCOOMe 15, PhC≡CMe 16, HC≡C(4‐^tBu‐C₆H₄) 17, HC≡CCOOMe 18). Unusual rearrangement products 11 a and 12 a were identified for the complexes of the terminal alkynes HC≡C(p‐Tol) and HC≡C(4‐^tBu‐C₆H₄), 11 and 12, which were formed by addition of a C−H bond of one of the NHC N‐ⁱPr methyl groups to the C≡C triple bond of the coordinated alkyne. Complex 2 catalyzes the cyclotrimerization of 2‐butyne, 4‐octyne, diphenylacetylene, dimethyl acetylendicarboxylate, 1‐pentyne, phenylacetylene and methyl propiolate at ambient conditions, whereas 1^Me is not a good catalyst. The reaction of 2 with 2‐butyne was monitored in some detail, which led to a mechanistic proposal for the cyclotrimerization at [Ni(NHC)₂]. DFT calculations reveal that the differences between 1^Me and 2 for alkyne cyclotrimerization lie in the energy profile of the initiation steps, which is very shallow for 2, and each step is associated with only a moderate energy change. The higher stability of 3 compared to 14 is attributed to a better electron transfer from the NHC to the metal to the alkyne ligand for the N‐alkyl substituted NHC, to enhanced Ni‐alkyne backbonding due to a smaller C_NHC−Ni−C_NHC bite angle, and to less steric repulsion of the smaller NHC ⁱPr₂Im^Me.