Fluorescent Benzothiadiazole Derivatives as Fluorescence Imaging Dyes: A Decade of New Generation Probes

A theoretical investigation of benzothiadiazole derivatives for high efficiency OLEDs

It is of great importance and worthy of efforts to give a clear structure-property relationship and microscopic mechanism of fluorescence emitters with high quantum yield. In this work, we perform a detailed computational investigation to give an explanation to the high efficiency of a fluorescence emitter XBTD-NPh based TADF sensitized fluorescence (TSF) OLEDs, and construct a symmetry structure DSBNA-BTD. Theoretical calculations show that XBTD-NPh is a long-time phosphorescent material at 77 K and TADF is attributed to the RISC of T1 to S1 state. For DSBNA-BTD, excitons arrived at T1 state comes to a large rate of nonradiatively path to the ground state, meaning it is may not be an efficient TADF molecule. For both molecules, the fast IC between T2 and T1 state results in that the hot exciton channel T1-Tn-S1 makes no contribution to the TADF.

Strategy to Efficient Photodynamic Therapy for Antibacterium: Donor-Acceptor Structure in Hydrogen-Bonded Organic Framework

While the construction of a donor-acceptor (D-A) structure has gained great attention across various scientific disciplines, such structures are seldomly reported within the field of hydrogen-bonded organic frameworks (HOFs). Herein, a D-A based HOF is synthesized, where the adjacent D-A pairs are connected by hydrogen bonds instead of the conventionally employed covalent bonds. This structural feature imparts material with a reduced energy gap between excited state and triplet state, thereby facilitating the intersystem crossing (ISC) and boosting the generation rate of single oxygen (quantum yield = 0.98). Consequently, the resulting material shows high performance for antimicrobial photodynamic therapy (PDT). The impact of D-A moiety is evident when comparing this finding to a parallel study conducted on an isoreticular HOF without a D-A structure. The study presented here provides in-depth insights into the photophysical properties of D-A pair in a hydrogen-bonded network, opening a new avenue to the design of innovative materials for efficient PDT.

Tuning the Emission Properties of 2,1,3-Benzothiadiazoles via Regioselective Substitution

The 2,1,3-benzothiadiazole (BTD) unit is a prominent building block commonly used in various research areas such as optoelectronics and bioimaging. Despite its great versatility, the development of strategies to elaborate BTD has been largely neglected, including exploring its reactivity and understanding how regioselective functionalization can be used to tune the fluorescence emission. Previous focus has primarily been on C4- or C4,C7-substitutions. Here, a series of unsymmetrical mono - and disubstituted BTDs was synthesized and characterized for their photophysical properties. The reaction scope includes all six possible substituent patterns on the BTD benzoid ring (C4-, C5-, C4,C5-, C4,C6-, C4,C7- and C5,C6-substitution), which comprise arrangements that previously been synthetically challenging to access. By introducing a methoxy and/or a phenyl group we demonstrate that the emissive behavior of BTD derivatives strongly depends on the position of the substituent (s). We show that regioselective substitution on BTD can engender long-lived fluorescence and circumvent strong fluorescence quenching in polar protic solvents, which is a limitation of many previously described BTD derivatives.

Flaring Inflammation and ER Stress by an Organelle-Specific Fluorescent Cage

The endoplasmic reticulum (ER) plays an important role in protein synthesis and its disruption can cause protein unfolding and misfolding. Accumulation of such proteins leads to ER stress, which ultimately promotes many diseases. Routine screening of ER activity in immune cells can flag serious conditions at early stages, but the current clinically used bio-probes have limitations. Herein, an ER-specific fluorophore based on a biocompatible benzothiadiazole-imine cage (BTD-cage) with excellent photophysical properties is developed. The cage outperforms commercially available ER stains in long-term live cell imaging with no fading or photobleaching over time. The cage is responsive to different levels of ER stress where its fluorescence increases accordingly. Incorporating the bio-probe into an immune disorder model, a 6-, 21-, and 48-fold increase in intensity is shown in THP-1, Raw 246.7, and Jurkat cells, respectively (within 15 min). These results strongly support that this system can be used for rapid visual and selective detection of ER stress. It is envisaged that tailoring molecular interactions and molecular recognition using supramolecular improved fluorophores can expand the library of biological probes for enhanced selectivity and targetability toward cellular organelles.

Design, synthesis, and biological application of A-D-A-type boranil fluorescent dyes

For the first time, three acceptor-donor-acceptor (A-D-A)-type boranil fluorescent dyes, CSU-BF-R (R = H, CH3, and OCH3), featuring phenothiazine as the donor, were designed and synthesized. CSU-BF-R exhibited remarkable photophysical characteristics, including large Stokes shifts (>150 nm), high fluorescence quantum yields (up to 40%), long-wavelength emissions, and strong red solid-state fluorescence. Moreover, these CSU-BF-R fluorescent dyes were demonstrated to function as highly selective and sensitive ratiometric fluorescent probes for detecting hypochlorous acid (HClO). The preliminary biological applications of CSU-BF-OCH3 for sensing intracellular HClO in living cells and zebrafish were demonstrated. Therefore, CSU-BF-R possess the potential to further explore the physiological and pathological functions associated with HClO and provide valuable insights into the design of high-performance A-D-A-type fluorescent dyes.

Derivatization of 2,1,3-Benzothiadiazole via Regioselective C-H Functionalization and Aryne Reactivity

Despite growing interest in 2,1,3-benzothiadiazole (BTD) as an integral component of many functional molecules, methods for the functionalization of its benzenoid ring have remained limited, and many even simply decorated BTDs have required de novo synthesis. We show that regioselective Ir-catalyzed C-H borylation allows access to versatile 5-boryl or 4,6-diboryl BTD building blocks, which undergo functionalization at the C4, C5, C6, and C7 positions. The optimization and regioselectivity of C-H borylation are discussed. A broad reaction scope is presented, encompassing ipso substitution at the C-B bond, the first examples of ortho-directed C-H functionalization of BTD, ring closing reactions to generate fused ring systems, as well as the generation and capture reactions of novel BTD-based heteroarynes. The regioselectivity of the latter is discussed with reference to the Aryne Distortion Model.

Water-Soluble Small Organic Fluorophores for Oncological Theragnostic Applications: Progress and Development

Cancer is one of the major noncommunicable diseases, responsible for millions of deaths every year worldwide. Though various cancer detection and treatment modalities are available today, many deaths occur owing to its late-stage detection and metastatic nature. Noninvasive detection using luminescence-based imaging tools is considered one of the promising techniques owing to its low cost, high sensitivity, and brightness. Moreover, these tools are unique and valuable as they can detect even the slightest changes in the cellular microenvironment. To achieve this, a fluorescent probe with strong tumor uptake and high spatial and temporal resolution, especially with high water solubility, is highly demanded. Recently, several water-soluble molecules with emission windows in the visible (400-700 nm), first near-infrared (NIR-I, 700-1000 nm), and second near-infrared (NIR-II, 1000-1700 nm) windows have been reported in literature. This review highlights recently reported water-soluble small organic fluorophores/dyes with applications in cancer diagnosis and therapeutics. We systematically highlight and describe the key concepts, structural classes of fluorophores, strategies for imparting water solubility, and applications in cancer therapy and diagnosis, i.e., theragnostics. We discuss examples of water-soluble fluorescent probes based on coumarin, xanthene, boron-dipyrromethene (BODIPY), and cyanine cores. Some other emerging classes of dyes based on carbocyclic and heterocyclic cores are also discussed. Besides, emerging molecular engineering methods to obtain such fluorophores are discussed. Finally, the opportunities and challenges in this research area are also delineated.

BenzoHTag, a fluorogenic self-labeling protein developed using molecular evolution

Self-labeling proteins are powerful tools in chemical biology as they enable the precise cellular localization of a synthetic molecule, often a fluorescent dye, with the genetic specificity of a protein fusion. HaloTag7 is the most popular self-labeling protein due to its fast labeling kinetics and the simplicity of its chloroalkane ligand. Reaction rates of HaloTag7 with different chloroalkane-containing substrates is highly variable and rates are only very fast for rhodamine-based dyes. This is a major limitation for the HaloTag system because fast labeling rates are critical for live-cell assays. Here, we report a molecular evolution system for HaloTag using yeast surface display that enables the screening of libraries up to 108 variants to improve reaction rates with any substrate of interest. We applied this method to produce a HaloTag variant, BenzoHTag, which has improved performance with a fluorogenic benzothiadiazole dye. The resulting system has improved brightness and conjugation kinetics, allowing for robust, no-wash fluorescent labeling in live cells. The new BenzoHTag-benzothiadiazole system has improved performance in live-cell assays compared to the existing HaloTag7-silicon rhodamine system, including saturation of intracellular enzyme in under 100 seconds and robust labeling at dye concentrations as low as 7 nM. It was also found to be orthogonal to the silicon HaloTag7-rhodamine system, enabling multiplexed no-wash labeling in live cells. The BenzoHTag system, and the ability to optimize HaloTag for a broader collection of substrates using molecular evolution, will be very useful for the development of cell-based assays for chemical biology and drug development.

Multifunctional Photoelectroactive Materials for Optoelectronic Applications Based on Thieno[3,4-b]pyrazines and Thieno[1,2,5]thiadiazoles

In this study, we introduce a novel family of symmetrical thiophene-based small molecules with a Donor-Acceptor-Donor structure. These compounds feature three different acceptor units: benzo[c][1,2,5]thiadiazole (Bz), thieno[3,4-b]pyrazine (Pz), and thieno[1,2,5]thiadiazole (Tz), coupled with electron donor units based on a carbazole-thiophene derivative. Using Density Functional Theory (DFT), we investigate how the molecular geometry and strength of the central acceptor unit impact the redox and spectroscopic properties. Notably, the incorporation of Pz and Tz moieties induces a significant redshift in the absorption and emission spectra, which extend into the near-infrared (NIR) region, simultaneously reducing their energy gaps (~1.4-1.6 eV). This shift is attributed to the increased coplanarity of the oligomeric inner core, both in the ground (S0 ) and excited (S1 ) states, due to the enhanced quinoidal character as supported by bond-length alternation (BLA) analysis. These structural changes promote better π-electron delocalization and facilitate photoinduced charge transfer processes in optoelectronic devices. Notably, we show that Pz- and Tz-containing molecules exhibit NIR electrochromic behavior and present ambivalent character in bulk heterojunction (BHJ) solar cells. Finally, theoretical calculations suggest that these molecules could serve as effective two-photon absorption (2PA) probes, further expanding their potential in optoelectronic applications.

Silver-Catalyzed Skeletal Editing of Benzothiazol-2(3H)-ones and 2-Halogen-Substituted Benzothiazoles as a Rapid Single-Step Approach to Benzo[1,2,3]thiadiazoles

A facile silver(I)-catalyzed reaction of benzothiazol-2(3H)-ones with NaNO2, or using AgNO2 directly, enables a single-step transformation to the corresponding benzo[1,2,3]thiadiazoles in moderate to excellent yields, with wide functional group compatibility. It can also be performed in a one-pot manner from readily available 2-halobenzothiazoles. This intriguing transformation involving an atom replacement in the S,N-heteroarene ring thus provides rapid access to isobenzothiadiazoles (while avoiding the usage of unstable precursors) and also expands the toolbox of modern skeletal editing reactions.

Chronological development of functional fluorophores for bio-imaging

Functional fluorophores represent an emerging research field, distinguished by their diverse applications, especially in sensing and cellular imaging. After the discovery of quinine sulfate and subsequent elucidation of the fluorescence mechanism by Sir George Stokes, research in the field of fluorescence gained momentum. Over the past few decades, advancements in sophisticated instruments, including super-resolution microscopy, have further promoted cellular imaging using traditional fluorophores. These advancements include deciphering sensing mechanisms via photochemical reactions and scrutinizing the applications of fluorescent probes that specifically target organelles. This approach elucidates molecular interactions with biomolecules. Despite the abundance of literature illustrating different classes of probe development, a concise summary of newly developed fluorophores remains inadequate. In this review, we systematically summarize the chronological discovery of traditional fluorophores along with new fluorophores. We briefly discuss traditional fluorophores ranging from visible to near-infrared (NIR) in the context of cellular imaging and in vivo imaging. Furthermore, we explore ten new core fluorophores developed between 2007 and 2022, which exhibit advanced optical properties, providing new insights into bioimaging. We illustrate the utilization of new fluorophores in cellular imaging of biomolecules, such as reactive oxygen species (ROS), reactive nitrogen species (RNS), and proteins and microenvironments, especially pH and viscosity. Few of the fluorescent probes provided new insights into disease progression. Furthermore, we speculate on the potential prospects and significant challenges of existing fluorophores and their potential biomedical research applications. By addressing these aspects, we intend to illuminate the compelling advancements in fluorescent probe development and their potential influence across various fields.

Engineered fluorogenic HaloTag ligands for turn-on labelling in live cells

Recent years have seen dramatic improvements in the design of organic fluorophores based on limiting non-radiative decay pathways. We sought to extend this understanding to benzothiadiazoles that have been used as turn-on fluorescent substrates for the self-labeling protein HaloTag. When conjugated to HaloTag, the benzothiadiazoles reside in a narrow tunnel that precludes twisted internal charge transfer, which allowed us to explore steric and electronic effects on other non-radiative decay pathways. By minimizing both non-radiative decay and nonspecific interactions with cellular components, we produced improved turn-on dyes with 136-fold increase in fluorescence over background in cells.

Dithienoazepine-Based Near-Infrared Dyes: Janus-Faced Effects of a Thiophene-Fused Structure on Antiaromatic Azepines

We here disclose that the incorporation of thiophene rings into a seven-membered 8π azepine in a fused fashion produces a useful antiaromatic core for near-infrared (NIR) dyes. In contrast to dibenzazepine derivatives with bent structures, dithieno-fused derivatives with electron-accepting groups adopt flat conformations in the ground state. The dithieno-fused derivatives exhibited broad absorption spectra that cover the visible region as well as sharp emission bands in the NIR region, which are considerably red-shifted relative to those of the dibenzo-fused congeners. Theoretical study revealed two contradictory effects of the less-aromatic thiophene-fused structure, i.e., the enhancement of the antiaromaticity of the adjacent azepine ring and the relief of the antiaromaticity through the contribution of a quinoidal resonance form. The combination of the dithienoazepine core with cationic electron-accepting groups produced a NIR fluorescent dye with an emission at 878 nm in solution.

Functional chromophores synthesized via multicomponent Reactions: A review on their use as cell-imaging probes

This review aims to provide a comprehensive overview of recent advancements and applications of fluorescence imaging probes synthesized via MCRs (multicomponent reactions). These probes, also known as functional chromophores, belong to a currently investigated class of fluorophores that are presently being successfully applied in bioimaging experiments, especially in various living cell lineages. We describe some of the MCRs that have been employed in the synthesis of these probes and explore their applications in biological imaging, with an emphasis on cellular imaging. The review also discusses the challenges and future perspectives in the field, particularly considering the potential impact of MCR-based fluorescence imaging probes on advancing this field of research in the coming years. Considering that this area of research is relatively new and nearly a decade has passed since the first publication, this review also provides a historical perspective on this class of fluorophores, highlighting the pioneering works published between 2011 and 2016.

Effects of donor and acceptor substituents on the photophysics of 4-ethynyl-2,1,3-benzothiadiazole derivatives

The present work explores the photophysical, electrochemical, and fluorescence polarization properties of a group of π-conjugated phenylethynyl-2,1,3-benzothiadiazole derivatives (BTDs) bearing different electron-donating (ED) or electron-withdrawing (EW) substituents at the para position of the phenylethynyl moiety. The BTDs were synthesized through the Sonogashira cross-coupling reaction between 4-bromo-2,1,3-benzothiadiazole and the respective para-substituted phenylethynyl derivatives. The BTDs with the EW-substituents show relatively weak solvatochromic behavior, while the BTDs with the strong ED-substituents like methoxy and N,N-dimethylamino-based substituents (BTDPhOMe and BTDPhNMe2) exhibit a pronounced solvatochromic behavior. The change in dipole moments in the excited states of the derivatives was calculated using Lippert-Mataga plots. The conclusions drawn on the spectral behavior of the molecules could be rationalized by TD-DFT calculations involving electron density difference (EDD) maps that correlate with the ICT characteristics of the molecules. The experimental and theoretical calculations reveal that the BTDs with the strong ED-substituents (strong push-pull type BTDs) have a strong ICT character in the excited state. These strong push-pull type BTDs show high fluorescence quantum yield (ΦF) in apolar solvents and low ΦF in polar solvents. In contrast, the BTDs with the weak ED-substituents (weak push-pull type BTDs) and EW-substituents (pull-pull type BTDs) have a weaker ICT character with low ΦF in apolar and high ΦF in polar solvent media. There is good a agreement among the HOMO-LUMO band gaps obtained from absorption spectroscopy and electrochemical studies and theoretical calculations. The fluorescence anisotropy measurement in the glycerol medium shows that the studied BTDs generally exhibit higher sensitivity towards microviscosity than the traditional DPH fluorescence anisotropy probe.

Polarity-Sensitive Probe for Two-Photon Fluorescence Lifetime Imaging of Lipid Droplets In Vitro and In Vivo

Lipid droplets (LDs) are crucial organelles used to store lipids and participate in lipid metabolism in cells. The abnormal aggregation and polarity change of LDs are associated with the occurrence of diseases, such as steatosis. Herein, the polarity-sensitive probe TBPCPP with a donor-acceptor-π-acceptor (D-A-π-A) structure was designed and synthesized. The TBPCPP has a large Stokes shift (∼220 nm), excellent photostability, high LD targeting, and considerable two-photon absorption (TPA) cross-section (∼226 GM), enabling deep two-photon imaging (∼360 μm). In addition, the fluorescence lifetime of TBPCPP decreases linearly with increasing solvent polarity. Therefore, with the assistance of two-photon fluorescence lifetime imaging microscopy (TP-FLIM), TBPCPP has successfully achieved not only the visualization of polarity changes caused by LD accumulation in HepG-2 cells but also lipid-specific imaging and visualization of different polarities in lipid-rich regions in zebrafish for the first time. Furthermore, TP-FLIM revealed that the polarity gradually decreases during steatosis in HepG-2 cells, which provided new insights into the diagnosis of steatosis.

Small Fluorogenic Amino Acids for Peptide-Guided Background-Free Imaging

The multiple applications of super-resolution microscopy have prompted the need for minimally invasive labeling strategies for peptide-guided fluorescence imaging. Many fluorescent reporters display limitations (e.g., large and charged scaffolds, non-specific binding) as building blocks for the construction of fluorogenic peptides. Herein we have built a library of benzodiazole amino acids and systematically examined them as reporters for background-free fluorescence microscopy. We have identified amine-derivatized benzoselenadiazoles as scalable and photostable amino acids for the straightforward solid-phase synthesis of fluorescent peptides. Benzodiazole amino acids retain the binding capabilities of bioactive peptides and display excellent signal-to-background ratios. Furthermore, we have demonstrated their application in peptide-PAINT imaging of postsynaptic density protein-95 nanoclusters in the synaptosomes from mouse brain tissues.

Small Fluorogenic Amino Acids for Peptide-Guided Background-Free Imaging

The multiple applications of super-resolution microscopy have prompted the need for minimally invasive labeling strategies for peptide-guided fluorescence imaging. Many fluorescent reporters display limitations (e.g., large and charged scaffolds, non-specific binding) as building blocks for the construction of fluorogenic peptides. Herein we have built a library of benzodiazole amino acids and systematically examined them as reporters for background-free fluorescence microscopy. We have identified amine-derivatized benzoselenadiazoles as scalable and photostable amino acids for the straightforward solid-phase synthesis of fluorescent peptides. Benzodiazole amino acids retain the binding capabilities of bioactive peptides and display excellent signal-to-background ratios. Furthermore, we have demonstrated their application in peptide-PAINT imaging of postsynaptic density protein-95 nanoclusters in the synaptosomes from mouse brain tissues.

Biomimetic lipid-fluorescein probe for cellular bioimaging

Fluorescence probe is one of the most powerful tools for cellular imaging. Here, three phospholipid-mimicking fluorescent probes (FP1-FP3) comprising fluorescein and two lipophilic groups of saturated and/or unsaturated C18 fatty acids were synthesized, and their optical properties were investigated. Like in biological phospholipids, the fluorescein group acts as a hydrophilic polar headgroup and the lipid groups act as hydrophobic non-polar tail groups. Laser confocal microscope images illustrated that FP3, which contains both saturated and unsaturated lipid tails, showed great uptake into the canine adipose-derived mesenchymal stem cells.

Dithiol-Activated Bioorthogonal Chemistry for Endoplasmic Reticulum-Targeted Synergistic Chemophototherapy

The controlled intracellular release of nitrite is still an unmet challenge due to the lack of bio-friendly donors, and the antitumor effect of nitrite is limited by its physiologically inert activity. Herein, we designed benzothiadiazole-based organic nitrite donors that are stable against bio-relevant species but selectively respond to dithiol species through S_N Ar/intramolecular cyclization tandem reactions in the aqueous media. The bioorthogonal system was established to target the endoplasmic reticulum (ER) of liver cancer HepG2 cells. The nitrite and nonivamide were coupled to induce elevation of intracellular levels of calcium ions as well as reactive oxygen/nitrogen species, which resulted in ER stress and mitochondrial dysfunction. We demonstrated that a combination of photoactivation and "click to release" strategy could enhance antitumor effect in cellular level and show good potential for cancer precision therapy.

Yttrium and Lithium Complexes with Diamidophosphane Ligand Bearing 2,1,3-Benzothiazolyl Substituent: Polydentate Complexation and Reversible NH–PH Tautomery

Deprotonation of a bis(amino)phosphane H2L = PhP(HNBtd)2 bearing a heterocyclic Btd = 2,1,3-benzothiadiazol-4-yl substituents at nitrogen atoms by silylamides LiNTms2 and Y(NTms2)3 (Tms = trimethylsilylamide) results in lithium and yttrium complexes with the deprotonated HL– and L2– forms as κ2-N and κ4-N chelating ligands. A binuclear complex [LiHL]2 was crystallized from Et2O, and was shown to reversibly dissociate in thf (tetrahydrofuran) with the NH(soln)–PH(crystal) tautomeric shift; the compound [Li2L] was spectroscopically characterized. Yttrium readily forms stable bis-ligand complexes [YL2]– and [YL(HL)]. In the latter, the H atom in HL resides on phosphorus; the coordination sphere remains accessible to another ligands, and it was crystallized as [{YL(HL)}2(µ-dioxane)] species (YN8O coordination). In the former complex, the coordination sphere was saturated (YN8) by closer bound ligands; it was crystallized as a salt with [Li(thf)4]+. The monoligand complex could not be cleanly obtained in a 1:1 reaction of H2L and Y(NTms2)3, and was only crystallographically characterized as a dimer [YL(NTms)2]2. Partial oxidation of the central P atom with the formation of phosphine-oxide ligands PhP(O)(NBtd)2– was observed. They co-crystallize in the same position as non-oxidized ligands in [YL2]– and [YL(NTms2)]2 species and participate in bonding between two units in the latter. TD-DFT calculations reveal that main transitions in the visible region of electronic spectra correspond to the charge transfer bands mostly associated with the orbitals located on Btd fragments.

Molecular Environment Effects That Modulate the Photophysical Properties of Novel 1,3-Phosphinoamines Based on 2,1,3-Benzothiadiazole

We report synthesis, crystal structure, and photophysical properties of novel 1,3-phosphinoamines based on 4-amino-2,1,3-benzothiadiazole (NH₂-btd): Ph₂PCH(Ph)NH-btd (1) and Ph₂P(E)CH(Ph)NH-btd, (E = O (2α and 2β·thf), S (3), Se (4)). Chalcogenides 2–4 exhibit bright emissions with a major band at 519–536 nm and a minor band at 840 nm. According to TD-DFT calculations, the first band is attributed to fluorescence, while the second band corresponds to phosphorescence. In the solid state, room temperature quantum yield reaches 93% in the case of the sulphide. The compounds under study feature effects of the molecular environment on the luminescent properties, which manifest themselves in fluorosolvatochromism as well as in a luminescent response to changes in crystal packing and in contributions to aggregation effects. Specifically, transformation of solid 2β·thf to solvate-free 2β either by aging or by grinding causes crystal packing changes, and, as a result, a hypsochromic shift of the emission band. Polystyrene films doped with 2 reveal a bathochromic shift upon increasing the mass fraction from 0.2 to 3.3%, which is caused by molecular aggregation effects.

Photophysical characterization and fluorescence cell imaging applications of 4-N-substituted benzothiadiazoles

In this work, a series of fluorescent 2,1,3-benzothiadiazole derivatives with various N-substituents in the 4-position was synthesized and photophysically characterized in various solvents. Three compounds emerged as excellent fluorescent probes for imaging lipid droplets in cancer cells. A correlation between their high lipophilicity and lipid droplet specificity could be found, with log P ≥ 4 being characteristic for lipid droplet accumulation.

Bis-triazolylchalcogenium-Functionalized Benzothiadiazole Derivatives as Light-up Sensors for DNA and BSA

A range of bis-triazolylchalcogenium-BTD 3 was synthesized by a copper-catalyzed azide-alkyne cycloaddition of azido arylchalcogenides 1 and 4,7-diethynylbenzo[c][1,2,5]thiadiazole 2. Eight new compounds were obtained in moderate to good yields using 1 mol % of copper(II) acetate monohydrate under mild reaction conditions. In addition, the synthesized bis-triazolylchalcogenium-BTD 3a-3h were investigated regarding their photophysical, electrochemical, and biomolecule binding properties in solution. In general, compounds presented strong absorption bands at the 250-450 nm region and cyan to green emission properties. The redox process attributed to the chalcogen atom was observed by electrochemical analysis (CV techniques). In addition, spectroscopic studies by UV-vis, steady-state emission fluorescence, and molecular docking calculations evidenced the ability of each derivative to establish interactions with calf-thymus DNA (CT-DNA) and bovine serum albumin (BSA). The behavior presented for this new class of compounds makes them a promising tool as optical sensors for biomolecules.

New Unsymmetrically Substituted Benzothiadiazole-Based Luminophores: Synthesis, Optical, Electrochemical Studies, Charge Transport, and Electroluminescent Characteristics

Three new benzothiadiazole (BTD)-containing luminophores with different configurations of aryl linkers have been prepared via Pd-catalyzed cross-coupling Suzuki and Buchwald–Hartwig reactions. Photophysical and electroluminescent properties of the compounds were investigated to estimate their potential for optoelectronic applications. All synthesized structures have sufficiently high quantum yields in film. The BTD with aryl bridged carbazole unit demonstrated the highest electrons and holes mobility in a series. OLED with light-emitting layer (EML) based on this compound exhibited the highest brightness, as well as current and luminous efficiency. The synthesized compounds are not only luminophores with a high photoluminescence quantum yield, but also active transport centers for charge carriers in EML of OLED devices.