Characterising rag-forming solids

Hydrophilic Silica Nanoparticles in O/W Emulsion: Insights from Molecular Dynamics Simulation

Previous studies have been carried out on the effect of silica nanoparticles (SNPs) on the stability of oil-water emulsions. However, the combining configuration of SNPs and oil droplets at the molecular level and the effect of SNP content on the coalescence behavior of oil droplets cannot be obtained through experiments. In this paper, molecular dynamics (MD) simulation was performed to investigate the adsorption configuration of hydrophilic SNPs in an O/W emulsion system, and the effect of adsorption of SNPs on coalescence of oil droplets. The simulation results showed: (i) SNPs adsorbed on the surface of oil droplets, and excessive SNPs self-aggregated and connected by hydrogen bonds. (ii) Partially hydrophilic asphaltene and resin molecules formed adsorption configurations with SNPs, which changed the distribution of oil droplet components. Furthermore, compared with hydrophobic asphaltene, the hydrophilic asphaltene was easier to combine with SNPs. (iii) SNPs would extend the oil droplet coalescence time, and the π-π stacking structures were formed between asphaltene and asphaltene or resin molecules to enhance the connection between oil droplets during the oil droplet contact process. (iv) Enough SNPs tightly wrapped around the oil droplet, similar to the formation of a rigid film on the surface of an oil droplet, which hindered the contact and coalescence of components between oil droplets.

Switchable-Hydrophilicity Triethylamine: Formation and Synergistic Effects of Asphaltenes in Stabilizing Emulsions Droplets

In this study, SHT (switchable-hydrophilicity triethylamine, [Et₃NH]·[HCO₃]) has been synthesized and instrumentally characterized by Fourier transform⁻infrared spectroscopy (FTIR) and ¹³C nuclear magnetic resonance (NMR). The operational synthesis conditions of SHT were optimized and determined at 25 °C, Et₃N/H₂O volume ratio of 1:2 and CO₂ injection rate at 300 mL/min. When it was used to extract heavy oil from unconventional oil ore, it was found that it could break maltenes-in-water emulsions. When asphaltenes were present in the oil phase, it was observed that SHT could cooperate with asphaltenes. These results indicated that SHT works with asphaltenes, leading to synergistic effects in stabilizing oil⁻water (o/w) emulsions.

Interfacial and Colloidal Forces Governing Oil Droplet Displacement: Implications for Enhanced Oil Recovery

Growing oil demand and the gradual depletion of conventional oil reserves by primary extraction has highlighted the need for enhanced oil recovery techniques to increase the potential of existing reservoirs and facilitate the recovery of more complex unconventional oils. This paper describes the interfacial and colloidal forces governing oil film displacement from solid surfaces. Direct contact of oil with the reservoir rock transforms the solid surface from a water-wet to neutrally-wet and oil-wet as a result of the deposition of polar components of the crude oil, with lower oil recovery from oil-wet reservoirs. To enhance oil recovery, chemicals can be added to the injection water to modify the oil-water interfacial tension and solid-oil-water three-phase contact angle. In the presence of certain surfactants and nanoparticles, a ruptured oil film will dewet to a new equilibrium contact angle, reducing the work of adhesion to detach an oil droplet from the solid surface. Dynamics of contact-line displacement are considered and the effect of surface active agents on enhancing oil displacement discussed. The paper is intended to provide an overview of the interfacial and colloidal forces controlling the process of oil film displacement and droplet detachment for enhanced oil recovery. A comprehensive summary of chemicals tested is provided.

Interfacial sciences in unconventional petroleum production: from fundamentals to applications

With the ever increasing demand for energy to meet the needs of growth in population and improvement in the living standards, in particular in developing countries, the abundant unconventional oil reserves (about 70% of total world oil), such as heavy oil, oil/tar sands and shale oil, are playing an increasingly important role in securing global energy supply.

Understanding mechanisms of asphaltene adsorption from organic solvent on mica

The adsorption process of asphaltene onto molecularly smooth mica surfaces from toluene solutions of various concentrations (0.01-1 wt %) was studied using a surface forces apparatus (SFA). Adsorption of asphaltenes onto mica was found to be highly dependent on adsorption time and asphaltene concentration of the solution. The adsorption of asphaltenes led to an attractive bridging force between the mica surfaces in asphaltene solution. The adsorption process was identified as being controlled by the diffusion of asphaltenes from the bulk solution to the mica surface with a diffusion coefficient on the order of 10(-10) m(2)/s at room temperature, depending on the asphaltene bulk concentration. This diffusion coefficient corresponds to a hydrodynamic molecular radius of approximately 0.5 nm, indicating that asphaltene diffuses to mica surfaces as individual molecules at very low concentration (e.g., 0.01 wt %). Atomic force microscopy images of the adsorbed asphaltenes on mica support the results of the SFA force measurements. The results from the SFA force measurements provide valuable insights into the molecular interactions (e.g., steric repulsion and bridging attraction as a function of distance) of asphaltenes in organic media and hence their roles in crude oil and bitumen production.