Application of effective orifice jet length for treating SST effluent of STP by hydrodynamic cavitation

Advanced oxidation process in general and hydrodynamic cavitation, in particular, has emerged as a promising technology for the treatment of wastewater in the last few years as the process is energy-efficient and cost-effective. In this process, cavities are generated due to local pressure drops caused by constrictions. This work aimed to investigate the potential of hydrodynamic cavitation as a tertiary treatment to treat the secondary sedimentation tank effluent of a sewage treatment plant, with two laboratory-scale experimental setups having an orifice plate of a 1 mm diameter hole. The process dependency was estimated by optimizing inlet pressure (0.8 bar for setup I and 5 bar for setup II). Moreover, effective orifice jet length was varied to investigate the impact of fluid buoyancy force on expansion and collapse of a cavity on the chemical oxygen demand removal and disinfection potential. At L2 length (two-thirds of the original length), both setups can degrade the organic and inorganic pollutants to the maximum extent. With the optimum condition in setup II, maximum COD, TSS, and fecal coliform degradation were 80.47%, 62.83%, and 52.27%, respectively, compared to setup I.

Numerical Investigation of the Cavitation Characteristics in Venturi Tubes: The Role of Converging and Diverging Sections

Cavitation is a typical physical process that has shown to be highly valuable in the wastewater treatment field. This study aims to investigate the effects of the converging and diverging sections of a Venturi tube on the cavitation flow field. Multiphase flows in tubes are presented using the mixture model and the standard k-ε model. And the Schnerr and Sauer cavitation model is employed to simulate the vapor–liquid phase transition process. Both grid independence and the numerical method’s feasibility were validated before the research. The results showed that the influence of the divergence section length on Venturi cavitation characteristics depends on the provided pressure conditions. As the pressure increases, shorter divergence sections result in more significant cavitation effects. The length of the convergence section displays various cavitation behaviors under different pressure situations. A small contraction section length can achieve better cavitation effects in high-pressure applications, whereas the opposite is true in low-pressure cases. Within the scope of this study, it was observed that the Venturi tube with a divergent section of 14 Lt and a convergent one of 2.4 Lt provided enhanced cavitation performance when subjected to inlet pressures ranging from 0.8 to 1.2 MPa. Our findings indicate that the selection of converging and diverging section lengths in Venturi tubes should consider the corresponding operational pressure conditions, which provides valuable guidance and engineering significance in the research and development of Venturi cavitation devices in hydraulic engineering.

Trends and characteristics of employing cavitation technology for water and wastewater treatment with a focus on hydrodynamic and ultrasonic cavitation over the past two decades: A Scientometric analysis

Cavitation-based technologies have emerged as a sustainable and effective way to treat natural waters and wastewater, considering their increasing scarcity due to pollution and climate change. For this reason, this work aimed to conduct a scientometric analysis on the topic of cavitation for water and wastewater treatment during the last 20 years, from 2001 to August 2022. We focused on hydrodynamic and ultrasonic cavitation as the prevalent methods of inducing cavitation. Furthermore, an in-depth study on the main trends regarding the number of publications and citations, keywords co-occurrence and evolution, and countries' publication trends was carried out to investigate the future direction of this research topic. The data was gathered from the Web of Science database and analyzed by the Visualization Of Similarities software. This work focused on: i) publication and citation trends, ii) scientific categories, iii) countries' contribution to the topic of cavitation, iv) prominent journals, v) keyword co-occurrence and cluster analysis, and vi) keyword evolution analysis. Results showed a significant increase in publications during the past 5 years. The scientific categories with the highest number of publications were "environmental sciences" and "environmental engineering," with a combined share of 19.4 % of publications. Keywords evolution analysis showed that limited focus was given to topics related to "energy" and "energy efficiency" in the field of cavitation, but with the rising importance of each process's sustainability, the attention given to these concepts will increase in the future. Future directions for the topic of cavitation-related water and wastewater treatments will shift towards more environmentally friendly applications of hydrodynamic and ultrasonic cavitation as well as towards more green and sustainable approaches to address the increasing water pollution problems and shortage. Moreover, it will include other uses besides water treatment such as manufacturing nanomaterials food production and medicine.