Waste water treatment by solvent extraction

Electrodegradation of nitrogenous pollutants in sewage: from reaction fundamentals to energy valorization applications

The excessive accumulation of nitrogen pollutants (mainly nitrate, nitrite, ammonia nitrogen, hydrazine, and urea) in water bodies seriously disrupts the natural nitrogen cycle and poses a significant threat to human life and health. Electrolysis is considered a promising method to degrade these nitrogenous pollutants in sewage, with the advantages of high efficiency, wide generality, easy operability, retrievability, and environmental friendliness. For particular energy devices, including metal-nitrate batteries, direct fuel cells, and hybrid water electrolyzers, the realization of energy valorization from sewage purification processes (e.g., valuable chemical generation, electricity output, and hydrogen production) becomes feasible. Despite the progress in the research on pollutant electrodegradation, the development of electrocatalysts with high activity, stability, and selectivity for pollutant removal, coupled with corresponding energy devices, remains a challenge. This review comprehensively provides advanced insights into the electrodegradation processes of nitrogenous pollutants and relevant energy valorization strategies, focusing on the reaction mechanisms, activity descriptors, electrocatalyst design, and actuated electrodes and operation parameters of tailored energy conversion devices. A feasibility analysis of electrodegradation on real wastewater samples from the perspective of pollutant concentration, pollutant accumulation, and electrolyte effects is provided. Challenges and prospects for the future development of electrodegradation systems are also discussed in detail to bridge the gap between experimental trials and commercial applications.

High-throughput experimentation for photocatalytic water purification in practical environments

High-throughput screening instrument was developed for photocatalytic water purification, enabling the simultaneous testing of 132 photocatalytic reactions under uniform visible light irradiation, temperature control, and stirring. The instrument was used to investigate the effects of different catalysts (TiO2, ZnO, α-Fe2O3) and environmental waters (seawater, urban wastewater, and industrial wastewater) on dye degradation. It was observed environmental ions, particularly carbonate and phosphate ions, significantly reduced catalyst activity by inhibiting the adsorption of dye molecules. To develop effective catalysts for dye degradation in industrial wastewater, 15 types of noble metal nanoparticles (NPs) were supported on photocatalysts. The study found that noble metal NPs with high work functions and oxidation resistance, such as Au and Pt, exhibited higher activity even in the industrial wastewater, likely converting environmental ions into active species. These findings, based on 432 test results, demonstrate the effectiveness of the developed high-throughput screening instrument for optimizing photocatalytic water purification.

Electrochemical Methods for Water Purification, Ion Separations, and Energy Conversion

Agricultural development, extensive industrialization, and rapid growth of the global population have inadvertently been accompanied by environmental pollution. Water pollution is exacerbated by the decreasing ability of traditional treatment methods to comply with tightening environmental standards. This review provides a comprehensive description of the principles and applications of electrochemical methods for water purification, ion separations, and energy conversion. Electrochemical methods have attractive features such as compact size, chemical selectivity, broad applicability, and reduced generation of secondary waste. Perhaps the greatest advantage of electrochemical methods, however, is that they remove contaminants directly from the water, while other technologies extract the water from the contaminants, which enables efficient removal of trace pollutants. The review begins with an overview of conventional electrochemical methods, which drive chemical or physical transformations via Faradaic reactions at electrodes, and proceeds to a detailed examination of the two primary mechanisms by which contaminants are separated in nondestructive electrochemical processes, namely electrokinetics and electrosorption. In these sections, special attention is given to emerging methods, such as shock electrodialysis and Faradaic electrosorption. Given the importance of generating clean, renewable energy, which may sometimes be combined with water purification, the review also discusses inverse methods of electrochemical energy conversion based on reverse electrosorption, electrowetting, and electrokinetic phenomena. The review concludes with a discussion of technology comparisons, remaining challenges, and potential innovations for the field such as process intensification and technoeconomic optimization.

A rapid and simple method for the removal of dyes and organophosphorus pesticides from water and soil samples using deep eutectic solvent embedded sponge

A new treatment method using a deep eutectic solvent embedded melamine sponge (DES-MS) was studied for the removal of organic pollutants from water and soil samples. Five organophosphorus pesticides (OPPs) consisting of azinphos-methyl (AZP), parathion-methyl (PRT), fenitrothion (FNT), diazinon (DIZ) and chlorpyrifos (CPF), and two dyes including acid blue 29 (AB29) and malachite green (MG) were used as the model pollutants. DESs were easily prepared from tetrabutylammonium bromide (TBABr) and various fatty acids. The synthesised DESs were loaded into the sponge before being utilized for the removal of the studied pollutants. After the removal, the residual OPPs or dyes in the supernatant was quantified by high performance liquid chromatography or derivative spectrophotometry, respectively. The proposed method was simple, rapid, environmentally friendly and effective with the removal efficiency higher than 70% for various samples. Moreover, the removal of various dyes was successfully achieved with the efficiency greater than 65% under the optimum condition.

Recent trends of MnO2-derived adsorbents for water treatment: a review

Over the years, manganese dioxide (MnO₂) and its different allotropes have gained significant research attention in the field of wastewater treatment because of their exciting physicochemical properties.

Synthesis, characterization and applications of a new cation exchanger tamarind sulphonic acid (TSA) resin

A new composite cation exchanger, tamarind sulphonic acid (TSA) resin has been synthesized. The chemically modified TSA ion exchange resin has been used for the removal and preconcentration of Zn2+, Cd2+, Fe2+, Co2+ and Cu2+ ions in aqueous solution and effluent from the Laxmi steel plant in Jodhpur, India. This type of composite represents a new class of hybrid ion exchangers with good ion exchange capacity, stability, reproducibility and selectivity for toxic metal ions found in effluent from the steel industry. The characterization of the resin was carried out by determining the ion-exchange capacity, elemental analysis, pH titration, Fourier transform infrared spectra and thermal analysis. The distribution coefficients (K(d)) of toxic metal ions were determined in a reference aqueous solution and the steel plant effluent at different pH values; the absorbency of different metal ions on the TSA resin was studied for up to 10 cycles. The adsorption of different metal ions on TSA resin follows the order: Co2+ > Cu2+ > Zn2+ > Fe2+ > Cd2+. The ion exchange capacity of TSA resin is 2.87%.

Induction of xenobiotic-metabolizing enzymes and peroxisome proliferation in rat liver caused by dietary exposure to di(2-ethylhexyl)phosphate

Exposure of rats to 1% or 3% (w/w) di(2-ethylhexyl)phosphate in the diet for five days results in two- to three-fold inductions of liver cytosolic epoxide hydrolase activity and microsomal cytochrome P-450 content. Cytochromes P-450b + e were induced 20- to 35-fold, but no increase was observed in cytochrome P-450c. Considerably smaller effects were obtained on NADPH-cytochrome c reductase, microsomal epoxide hydrolase and microsomal cytochrome b5 content, and there was no effect on cytosolic glutathione transferase activity, under the same conditions. A dramatic increase in cyanide-insensitive palmitoyl-CoA oxidation and total mitochondrial protein, together with smaller increases in total catalase and cytochrome oxidase activities, were observed after treatment with di(2-ethylhexyl)phosphate, indicating that this compound causes proliferation of both peroxisomes and mitochondria. It is suggested that the induction of cytosolic epoxide hydrolase and the proliferation of peroxisomes may be related processes.