Optimizing Photoelectrochemical UV Imaging Photodetection: Construction of Anatase/Rutile Heterophase Homojunctions and Oxygen Vacancies Engineering in MOF-Derived TiO2

Self-powered photoelectrochemical (PEC) ultraviolet photodetectors (UVPDs) are promising for next-generation energy-saving and highly integrated optoelectronic systems. Constructing a heterojunction is an effective strategy to increase the photodetection performance of PEC UVPDs because it can promote the separation and transfer of photogenerated carriers. However, both crystal defects and lattice mismatch lead to deteriorated device performance. Here, we introduce a structural regulation strategy to prepare TiO2 anatase-rutile heterophase homojunctions (A-R HHs) with oxygen vacancies (OVs) photoanodes through an in situ topological transformation of titanium metal-organic framework (Ti-MOF) by pyrolysis treatment. The cooperative interaction between A-R HHs and OVs suppresses carrier recombination and accelerates carrier transport, thereby significantly enhancing the photodetection performance of PEC UVPDs. The obtained device realizes a high on/off ratio of 10,752, a remarkable responsivity of 24.15 mA W-1, an impressive detectivity of 3.28 × 1011 Jones, and excellent cycling stability. More importantly, under 365 nm light illumination, a high-resolution image of "HUST" (the abbreviation of Harbin University of Science and Technology) was obtained perfectly, confirming the excellent optical imaging capability of the device. This research not only presents an advanced methodology for constructing TiO2-based PEC UVPDs, but also provides strategic guidance for enhancing their performance and practical applications.

On the Origin of Raman Activity in Anatase TiO2 (Nano)Materials: An Ab Initio Investigation of Surface and Size Effects

Titania-based materials are abundant in technological applications, as well as everyday products; however, many of its structure-property relationships are still unclear. In particular, its surface reactivity on the nanoscale has important consequences for fields such as nanotoxicity or (photo)catalysis. Raman spectroscopy has been used to characterize titania-based (nano)material surfaces, mainly based on empirical peak assignments. In the present work, we address the structural features responsible for the Raman spectra of pure, stoichiometric TiO₂ materials from a theoretical characterization. We determine a computational protocol to obtain accurate Raman response in a series of anatase TiO₂ models, namely, the bulk and three low-index terminations by periodic ab initio approaches. The origin of the Raman peaks is thoroughly analyzed and the structure-Raman mapping is performed to account for structural distortions, laser and temperature effects, surface orientation, and size. We address the appropriateness of previous experimental use of Raman to quantify the presence of distinct TiO₂ terminations, and provide guidelines to exploit the Raman spectrum based on accurate rooted calculations that could be used to characterize a variety of titania systems (e.g., single crystals, commercial catalysts, thin layered materials, facetted nanoparticles, etc.).

High Pressure Rapid Synthesis of LiCrTiO4 with Oxygen Vacancy for High Rate Lithium-Ion Battery Anodes

Lithium-ion battery based on LiCrTiO₄ (LCTO) is considered to be a promising anode material, as they provide higher safety and durability beyond than that of graphite electrode. However, the applications of this transformative technology demand improved inherent electrical conductivity of LCTO as well as a simple and rapid synthetic route. Here, LCTO with oxygen vacancies (OVs) is fabricated using high-pressure synthesis technology in only 40 min. The optimal synthesis pressure is 0.8 GPa (LCTO-0.8). The reversible capacity of LCTO-0.8 at 1C is 131 mA h g^-1 after 1000 cycles and the capacity retention is nearly 97%, and the reversible capacity of LCTO synthesized at atmospheric pressure (LCTO-P) is 85 mA h g^-1 under the same circumstances. Even at 5C, the reversible capacity is 110 mA h g^-1 , which is 77% higher than LCTO-P. Furthermore, it is confirmed by theoretical calculations that the introduction of OVs has the occupation of electronic states at the Fermi level, which greatly enhances the intrinsic conductivity of LCTO. Specifically, the electronic conductivity has increased by two orders of magnitude compared with LCTO-P. Therefore, high-pressure synthesis technology endows LCTO with superior characteristics, providing a new avenue for industrialization.

A review on TiO2-x-based materials for photocatalytic CO2 reduction

Photocatalytic CO₂ reduction technology has a broad potential for dealing with the issues of energy shortage and global warming. As a widely studied material used in the photocatalytic process, titanium dioxide (TiO₂) has been continuously modified and tailored for more desirable application. Recently, the defective/reduced titanium dioxide (TiO_2-x) catalyst has attracted broad attention due to its excellent photocatalytic performance for CO₂ reduction. In this perspective review, we comprehensively present the recent progress in TiO_2-x-based materials for photocatalytic CO₂ reduction. In detail, the review starts with the fundamentals of CO₂ photocatalytic reduction. Then, the synthesis of a defective TiO₂ structure is introduced for the regulation of its photocatalytic performance, especially its optical properties and dissociative adsorption properties. In addition, the current application of TiO_2-x-based photocatalysts for CO₂ reduction is also highlighted, such as metal-TiO_2-x, oxide-TiO_2-x and TiO_2-x-carbon-based photocatalysts. Finally, the existing challenges and possible scope of photocatalytic CO₂ reduction over TiO_2-x-based materials are discussed. We hope that this review can provide an effective reference for the development of more efficient and reasonable photocatalysts based on TiO_2-x.

Highly efficient synthesis of novel bio-based pentamethylene dicarbamate via carbonylation of pentanediamine with ethyl carbamate over well-defined titanium oxide catalysts

Highly efficient synthesis of bio-based pentamethylene dicarbamate from pentanediamine and ethyl carbamate was successfully achieved over the well-defined TiO2 catalysts, which provides a green and sustainable way for the production of bio-based isocyanates or polyurethane.