Characterization of gliding motility in Flexibacter polymorphus

The Screw-Like Movement of a Gliding Bacterium Is Powered by Spiral Motion of Cell-Surface Adhesins

Flavobacterium johnsoniae, a rod-shaped bacterium, glides over surfaces at speeds of ∼2 μm/s. The propulsion of a cell-surface adhesin, SprB, is known to enable gliding. We used cephalexin to generate elongated cells with irregular shapes and followed their displacement in three dimensions. These cells rolled about their long axes as they moved forward, following a right-handed trajectory. We coated gold nanoparticles with an SprB antibody and tracked them in three dimensions in an evanescent field where the nanoparticles appeared brighter when they were closer to the glass. The nanoparticles followed a right-handed spiral trajectory on the surface of the cell. Thus, if SprB were to adhere to the glass rather than to a nanoparticle, the cell would move forward along a right-handed trajectory, as observed, but in a direction opposite to that of the nanoparticle.

Gliding motility driven by individual cell-surface movements in a multicellular filamentous bacterium Chloroflexus aggregans

Chloroflexus aggregans is an unbranched multicellular filamentous bacterium having the ability of gliding motility. The filament moves straightforward at a constant rate, ∼3 μm sec(-1) on solid surface and occasionally reverses the moving direction. In this study, we successfully detected movements of glass beads on the cell-surface along long axis of the filament indicating that the cell-surface movement was the direct force for gliding. Microscopic analyses found that the cell-surface movements were confined to a cell of the filament, and each cell independently moved and reversed the direction. To understand how the cellular movements determine the moving direction of the filament, we proposed a discrete-time stochastic model; sum of the directions of the cellular movements determines the moving direction of the filament only when the filament pauses, and after moving, the filament keeps the same directional movement until all the cells pause and/or move in the opposite direction. Monte Carlo simulation of this model showed that reversal frequency of longer filaments was relatively fixed to be low, but the frequency of shorter filaments varied widely. This simulation result appropriately explained the experimental observations. This study proposed the relevant mechanism adequately describing the motility of the multicellular filament in C. aggregans.

Helical flow of surface protein required for bacterial gliding motility

Cells of Flavobacterium johnsoniae and of many other members of the phylum Bacteroidetes exhibit rapid gliding motility over surfaces by a unique mechanism. These cells do not have flagella or pili; instead, they rely on a novel motility apparatus composed of Gld and Spr proteins. SprB, a 669-kDa cell-surface adhesin, is required for efficient gliding. SprB was visualized by electron microscopy as thin 150-nm-long filaments extending from the cell surface. Fluorescence microscopy revealed movement of SprB proteins toward the poles of the cell at ∼2 μm/s. The fluorescent signals appeared to migrate around the pole and continue at the same speed toward the opposite pole along an apparent left-handed helical closed loop. Movement of SprB, and of cells, was rapidly and reversibly blocked by the addition of carbonyl cyanide m-chlorophenylhydrazone, which dissipates the proton gradient across the cytoplasmic membrane. In a gliding cell, some of the SprB protein appeared to attach to the substratum. The cell body moved forward and rotated with respect to this point of attachment. Upon reaching the rear of the cell, the attached SprB often was released from the substratum, and apparently recirculated to the front of the cell along a helical path. The results suggest a model for Flavobacterium gliding, supported by mathematical analysis, in which adhesins such as SprB are propelled along a closed helical loop track, generating rotation and translation of the cell body.

Characterization of myxobacterial A-motility: insights from microcinematographic observations

Myxococcus xanthus, a predatory soil bacterium, has long been used as a model organism to study bacterial gliding motility. Research has revealed that two fundamentally distinct motor systems power gliding in this bacterium: repeated extensions and retractions of pili mediate social or (S-) motility, whereas the motor powering adventurous or (A-) motility has not yet been identified with certainty. Several different hypotheses to explain A-motility have been suggested and differ with respect to the involved motor structures as well as the mechanics of motility. As some of the more recent models invoke helically arranged structures and processes that require rotations of the cell, we decided to re-examine myxobacterial motility using microcinematographic techniques. This re-examination was also prompted by the lack of direct experimental data on the rotation of M. xanthus during gliding. Microcinematographic observations of deformed cells and cells containing large stationary intracellular structures reveal clearly that M. xanthus gliding does not require cell rotation.

Fast calcium waves

Calcium waves are propagated in five main speed ranges which cover a billion-fold range of speeds. We define the fast speed range as 3-30μm/s after correction to a standard temperature of 20°C. Only waves which are not fertilization waves are considered here. 181 such cases are listed here. These are through organisms in all major taxa from cyanobacteria through mammals including human beings except for those through other bacteria, higher plants and fungi. Nearly two-thirds of these speeds lie between 12 and 24μm/s. We argue that their common mechanism in eukaryotes is a reaction-diffusion one involving calcium-induced calcium release, in which calcium waves are propagated along the endoplasmic reticulum. We propose that the gliding movements of some cyanobacteria are driven by fast calcium waves which are propagated along their plasma membranes. Fast calcium waves may drive materials to one end of developing embryos by cellular peristalsis, help coordinate complex cell movements during development and underlie brain injury waves. Moreover, we continue to argue that such waves greatly increase the likelihood that chronic injuries will initiate tumors and cancers before genetic damage occurs. Finally we propose numerous further studies.

SprB is a cell surface component of the Flavobacterium johnsoniae gliding motility machinery

Cells of the gliding bacterium Flavobacterium johnsoniae move rapidly over surfaces by an unknown mechanism. Transposon insertions in sprB resulted in cells that were defective in gliding. SprB is a highly repetitive 669-kDa cell surface protein, and antibodies against SprB inhibited the motility of wild-type cells. Polystyrene microspheres coated with antibodies against SprB attached to and were rapidly propelled along the cell surface, suggesting that SprB is one of the outermost components of the motility machinery. The movement of SprB along the cell surface supports a model of gliding motility in which motors anchored to the cell wall rapidly propel cell surface adhesins.

Cell surface filaments of the gliding bacterium Flavobacterium johnsoniae revealed by cryo-electron tomography

Flavobacterium johnsoniae cells glide rapidly over surfaces by an as-yet-unknown mechanism. Using cryo-electron tomography, we show that wild-type cells display tufts of approximately 5-nm-wide cell surface filaments that appear to be anchored to the inner surface of the outer membrane. These filaments are absent in cells of a nonmotile gldF mutant but are restored upon expression of plasmid-encoded GldF, a component of a putative ATP-binding cassette transporter.

Flavobacterium johnsoniae GldJ is a lipoprotein that is required for gliding motility

Cells of Flavobacterium johnsoniae glide rapidly over surfaces by an unknown mechanism. Eight genes required for gliding motility have been described. Complementation of the nonmotile mutant UW102-48 identified another gene, gldJ, that is required for gliding. gldJ mutants formed nonspreading colonies, and individual cells were completely nonmotile. Like previously described nonmotile mutants, gldJ mutants were deficient in chitin utilization and were resistant to bacteriophages that infect wild-type cells. Cell fractionation and labeling studies with [(3)H]palmitate indicated that GldJ is a lipoprotein. Mutations in gldA, gldB, gldD, gldF, gldG, gldH, or gldI resulted in normal levels of gldJ transcript but decreased levels of GldJ protein. Expression of truncated GldJ protein in wild-type cells resulted in a severe motility defect. GldJ was found in regular bands that suggest the presence of a helical structure within the cell envelope.

Cytophaga-Flavobacterium Gliding Motility

Flavobacterium johnsoniae, like many other members of the Cytophaga-Flavobacterium-Bacteroides group, displays rapid gliding motility. Cells of F. johnsoniae glide over surfaces at rates of up to 10 microm/s. Latex spheres added to F. johnsoniae bind to and are rapidly propelled along cells, suggesting that adhesive molecules move laterally along the cell surface during gliding. Genetic analyses have identified a number of gld genes that are required for gliding. Three Gld proteins are thought to be components of an ATP-binding-cassette transporter. Five other Gld proteins are lipoproteins that localize to the cytoplasmic membrane or outer membrane. Disruption of gld genes results not only in loss of motility, but also in resistance to bacteriophages that infect wild-type cells, and loss of the ability to digest the insoluble polysaccharide chitin. Two models that attempt to incorporate the available data to explain the mechanism of F. johnsoniae gliding are presented.

Flavobacterium johnsoniae GldH is a lipoprotein that is required for gliding motility and chitin utilization

Cells of Flavobacterium johnsoniae move rapidly over surfaces by gliding motility. The mechanism of this form of motility is not known. Six genes (gldA, gldB, gldD, gldF, gldG, and ftsX) that are required for gliding have been described. Tn4351 mutagenesis was used to identify another gene, gldH, which is required for cell movement. GldH mutants formed nonspreading colonies, and individual cells lacked the cell movements and ability to propel latex spheres along their surfaces that are characteristic of wild-type cells. gldH mutants also failed to digest chitin and were resistant to bacteriophages that infect wild-type cells. Introduction of pMM293, which carries wild-type gldH, restored to the gldH mutants colony spreading, cell motility, the ability to move latex spheres, phage sensitivity, and the ability to digest chitin. gldH encodes a predicted 141-amino-acid protein that localized to the membrane fraction. Labeling studies with [3H]palmitate demonstrated that GldH is a lipoprotein. GldB and GldD, which were previously described, also appear to be lipoproteins. GldH does not exhibit significant amino acid similarity to proteins of known function in the databases. Putative homologs of gldH of unknown function are found in motile (Cytophaga hutchinsonii) and apparently nonmotile (Bacteroides thetaiotaomicron, Bacteroides fragilis, Tannerella forsythensis, Porphyromonas gingivalis, and Prevotella intermedia) members of the Cytophaga-Flavobacterium-Bacteroides group.

Gliding movement in Peranema trichophorum is powered by flagellar surface motility

A colorless euglenoid flagellate Peranema trichophorum shows unique unidirectional gliding cell locomotion on the substratum at velocities up to 30 micro m/s by an as yet unexplained mechanism. In this study, we found that (1) treatment with NiCl(2) inhibited flagellar beating without any effect on gliding movement; (2) water currents applied to a gliding cell from opposite sides caused detachment of the cell body from the substratum. With only the anterior flagellum adhering to the substratum, gliding movement continued along the direction of the anterior flagellum; (3) gentle pipetting induced flagellar severance into various lengths. In these cells, gliding velocity was proportional to the flagellar length; and (4) Polystyrene beads were translocated along the surface of the anterior flagellum. All of these results indicate that a cell surface motility system is present on the anterior flagellum, which is responsible for cell gliding in P. trichophorum.

Bacterial gliding motility: multiple mechanisms for cell movement over surfaces

The mechanisms responsible for bacterial gliding motility have been a mystery for almost 200 years. Gliding bacteria move actively over surfaces by a process that does not involve flagella. Gliding bacteria are phylogenetically diverse and are abundant in many environments. Recent results indicate that more than one mechanism is needed to explain all forms of bacterial gliding motility. Myxococcus xanthus "social gliding motility" and Synechocystis gliding are similar to bacterial "twitching motility" and rely on type IV pilus extension and retraction for cell movement. In contrast, gliding of filamentous cyanobacteria, mycoplasmas, members of the Cytophaga-Flavobacterium group, and "adventurous gliding" of M. xanthus do not appear to involve pili. The mechanisms of movement employed by these bacteria are still a matter of speculation. Genetic, biochemical, ultrastructural, and behavioral studies are providing insight into the machineries employed by these diverse bacteria that enable them to glide over surfaces.

Frozen motion of gliding bacteria outlines inherent features of the motility apparatus

High-resolution data of actively gliding wild-type bacteria of four different species and of four different gliding mutants of Myxococcus xanthus were obtained from scanning electron micrographs. By shock freezing and freeze drying, motility-associated surface patterns could be fixed and consequently distinct intermediate states of motion could be observed for the first time. It is shown that these topographic patterns are immediately lost when gliding motility is stopped by blocking the respiratory chain with potassium cyanide or sodium azide. From the surface topography, the mode of action of the gliding apparatus of all four bacterial species examined can be described as a twisted circularly closed 'band'. During gliding, groups of nodes of the supertwisted apparatus show evidence of travelling like waves along the trichomes. However, the spacing between the nodes is not constant but varies within a certain range. This indicates that they are flexibly modulated as a consequence of the gliding state of the individual trichome.

Gliding motility in bacteria: insights from studies of Myxococcus xanthus

Gliding motility is observed in a large variety of phylogenetically unrelated bacteria. Gliding provides a means for microbes to travel in environments with a low water content, such as might be found in biofilms, microbial mats, and soil. Gliding is defined as the movement of a cell on a surface in the direction of the long axis of the cell. Because this definition is operational and not mechanistic, the underlying molecular motor(s) may be quite different in diverse microbes. In fact, studies on the gliding bacterium Myxococcus xanthus suggest that two independent gliding machineries, encoded by two multigene systems, operate in this microorganism. One machinery, which allows individual cells to glide on a surface, independent of whether the cells are moving alone or in groups, requires the function of the genes of the A-motility system. More than 37 A-motility genes are known to be required for this form of movement. Depending on an additional phenotype, these genes are divided into two subclasses, the agl and cgl genes. Videomicroscopic studies on gliding movement, as well as ultrastructural observations of two myxobacteria, suggest that the A-system motor may consist of multiple single motor elements that are arrayed along the entire cell body. Each motor element is proposed to be localized to the periplasmic space and to be anchored to the peptidoglycan layer. The force to glide which may be generated here is coupled to adhesion sites that move freely in the outer membrane. These adhesion sites provide a specific contact with the substratum. Based on single-cell observations, similar models have been proposed to operate in the unrelated gliding bacteria Flavobacterium johnsoniae (formerly Cytophaga johnsonae), Cytophaga strain U67, and Flexibacter polymorphus (a filamentous glider). Although this model has not been verified experimentally, M. xanthus seems to be the ideal organism with which to test it, given the genetic tools available. The second gliding motor in M. xanthus controls cell movement in groups (S-motility system). It is dependent on functional type IV pili and is operative only when cells are in close proximity to each other. Type IV pili are known to be involved in another mode of bacterial surface translocation, called twitching motility. S-motility may well represent a variation of twitching motility in M. xanthus. However, twitching differs from gliding since it involves cell movements that are jerky and abrupt and that lack the organization and smoothness observed in gliding. Components of this motor are encoded by genes of the S-system, which appear to be homologs of genes involved in the biosynthesis, assembly, and function of type IV pili in Pseudomonas aeruginosa and Neisseria gonorrhoeae. How type IV pili generate force in S-motility is currently unknown, but it is to be expected that ongoing physiological, genetic, and biochemical studies in M. xanthus, in conjunction with studies on twitching in P. aeruginosa and N. gonorrhoeae, will provide important insights into this microbial motor. The two motility systems of M. xanthus are affected to different degrees by the MglA protein, which shows similarity to a small GTPase. Bacterial chemotaxis-like sensory transduction systems control gliding motility in M. xanthus. The frz genes appear to regulate gliding movement of individual cells and movement by the S-motility system, suggesting that the two motors found in this bacterium can be regulated to result in coordinated multicellular movements. In contrast, the dif genes affect only S-system-dependent swarming.

Acetate acts as a protonophore and differentially affects bead movement and cell migration of the gliding bacterium Cytophaga johnsonae (Flavobacterium johnsoniae)

Cells of Cytophaga johnsonae (now Flavobacterium johnsoniae) are able to translocate on solid surfaces but are unable to swim in liquid media. Organelles that may be involved in this gliding motility have not been detected, and the mechanism(s) responsible remains unknown. The movement of latex beads attached to the cell surface is considered by some to be a manifestation of the gliding machinery. In this study, acetate (in nutrient-level quantity, 45 mM) was found to inhibit bead movement on cell surfaces, whilst formation and movement of groups of cells (rafts) and typical colony spread were not affected; generation time (in liquid culture) was only slightly increased. Since acetate is a weak acid and is recognized as a protonophore, various electron-transport-associated features were assessed in an effort to understand the differential effects of acetate on bead movement and cell motility. Selected protonophores and electron transport inhibitors were tested to compare their effects on cell translocation and metabolic activities with those of acetate. Although O2 consumption was not significantly affected in the presence of acetate and the protonmotive force decreased only minimally, ATP levels were markedly decreased. Arsenate and cyanide were also shown to inhibit bead movement but did not inhibit either movement of rafts of cells or colony spreading. Cyanide lowered O2 consumption, while arsenate did not; both compounds effected substantial decreases in cellular ATP content, but little or no decrease in protonmotive force. The inhibitory effects of these compounds on bead movement over cell surfaces contrasted with the continued ability of cells to form rafts, to glide and to form spreading colonies and led to the conclusion that bead movement is not a complete correlate of the gliding machinery of C. johnsonae. In addition, it seems likely that bead movement is more affected by the level of cellular ATP than it is by the protonmotive force, which has been assumed to provide the energy (derived from the transmembrane gradients) for the gliding machinery.

An electromagnetic theory of life--II: Testing

Serious problems and contradictions face the long-standing chemical reaction theory of life. Arguments favoring an alternative view featuring electromagnetic micromechanisms were presented in the December 1989 issue of this Journal (27, 31). However, the theory had an extremely general form which was forbidding to laboratory demonstration. It became clear that its essentially conceptual form needed to be transformed to a testable theory which ultimately could lead to laboratory verification. Now, with the recognition of the role of chaos theory in finding order within chaos in the kinetics of cell metabolism, the electromagnetic theory of life has become better grounded and more amenable to laboratory testing and evaluation. I thus focus on certain theoretical advances as well as the application of new technologies to test the hypothesis of 5 specific target areas. With the verification of electromagnetic processes in life, we anticipate that the biomedical sciences will be propelled to a wealth of solutions to many vexing problems.

Temporal sequence of the recovery of traits during phenotypic curing of a Cytophaga johnsonae motility mutant

The lack of cell translocation and the resulting formation of nonspreading colonies of mutants of the gram-negative gliding bacterium Cytophaga johnsonae have been correlated with the loss of cell surface features of the organism. These cell surface traits include the ability to move polystyrene-latex beads over the cell surface and the ability to be infected by bacteriophages that infect the parent strain. In order to assess whether these traits reflect structures or functions that actually play a role in gliding, we studied a mutant (21A2I) selected for its inability to form spreading colonies; it is deficient in sulfonolipid, lacks bead movement ability, and is resistant to at least one bacteriophage. The provision of cysteate (a specific sulfonolipid precursor) restores lipid content and gliding to the mutant; hence, the lipids are necessary for motility. Growth with cysteate also restores bead movement and phage sensitivity. In order to determine the temporal relationship of these traits, we undertook a kinetic study of the appearance of them after addition of cysteate to the mutant. One predicts that appearance of a trait essential for cell translocation will either precede or accompany the appearance of this ability, while a nonessential trait need not do so. Sulfonolipid synthesis was the only trait that appeared before gliding; this is consistent with its established importance for motility. Bead movement and phage sensitivity first appeared only after gliding started, suggesting that the machinery involved in those processes is not necessary, at least for the initiation of gliding.

Hydrophobicity, Adhesion, and Surface-Exposed Proteins of Gliding Bacteria

The cell surface hydrophobicities of a variety of aquatic and terrestrial gliding bacteria were measured by an assay of bacterial adherence to hydrocarbons (BATH), hydrophobic interaction chromatography, and the salt aggregation test. The bacteria demonstrated a broad range of hydrophobicities. Results among the three hydrophobicity assays performed on very hydrophilic strains were quite consistent. Bacterial adhesion to glass did not correlate with any particular measure of surface hydrophobicity. Several adhesion-defective mutants of Cytophaga sp. strain U67 were found to be more hydrophilic than the wild type, particularly by the BATH assay and hydrophobic interaction chromatography. The very limited adhesion of these mutants correlated well with hydrophilicity as determined by the BATH assay. The hydrophobicities of several adhesion-competent revertants ranged between those of the wild type and the mutants. As measured by the BATH assay, starvation increased hydrophobicity of both the wild type and an adhesion-defective mutant. During filament fragmentation of Flexibacter sp. strain FS-1, marked changes in hydrophobicity and adhesion were accompanied by changes in the arrays of surface-exposed proteins as detected by an immobilized radioiodination procedure.

Adhesion and motility of gliding bacteria on substrata with different surface free energies

The adhesion and motility of several aquatic and terrestrial gliding bacteria on slides differing in their critical surface energies have been examined. In general, adhesion was tenacious on low-critical surface energy (hydrophobic) surfaces and tenuous on hydrophilic surfaces. Gliding was inhibited on very hydrophobic substrata and skittish on very hydrophilic surfaces.

Effect of temperature shifts on gliding motility, adhesion, and fatty acid composition of Cytophaga sp. strain U67

Gliding motility and flipping of 25 degrees C-adapted Cytophaga sp. strain U67 were inhibited when the bacteria were shifted to a less than or equal to 12 degrees C environment; motility was not blocked by a shift to 13 degrees C. Bacteria adapted to 4 degrees C were motile over the entire 4 to 25 degrees C temperature range tested. U67 adhesion to the substratum appeared to be unaffected by temperature shifts. Bacteria adapted to 4 degrees C had higher proportions of unsaturated and branched-chain fatty acids than did those grown at 25 degrees C. When 25 degrees C-adapted bacteria were subjected to a gradual temperature decline, the time of reappearance of gliding competence at 4 to 5 degrees C was correlated with these changes in fatty acid composition.

Interference reflection microscopic study of sites of association between gliding bacteria and glass substrata

Sites of close contact between gliding Cytophaga sp. strain U67 cells and glass were examined by interference reflection microscopy. Site patterns changed during translocation and moved relative to the substratum, in contrast to previous interference reflection microscopy observations of fibroblast and amoeboid motility. Sinistral rotation around the long axis of the cell was coupled with gliding, except when curved cells traversed curvilinear pathways. Close contact was temporary, since cells flipped up off the substratum on one pole, pivoted, or were displaced laterally in collisions. Other members of the order Cytophagales and Myxococcus sp. demonstrated similar patterns of close association with substrata.