Outcomes of myocardial infarction hydrogel injection therapy in the human left ventricle dependent on injectate distribution

In silico Mechanics of Stem Cells Intramyocardially Transplanted with a Biomaterial Injectate for Treatment of Myocardial Infarction

PURPOSE

Biomaterial and stem cell delivery are promising approaches to treating myocardial infarction. However, the mechanical and biochemical mechanisms underlying the therapeutic benefits require further clarification. This study aimed to assess the deformation of stem cells injected with the biomaterial into the infarcted heart.

METHODS

A microstructural finite element model of a mid-wall infarcted myocardial region was developed from ex vivo microcomputed tomography data of a rat heart with left ventricular infarct and intramyocardial biomaterial injectate. Nine cells were numerically seeded in the injectate of the microstructural model. The microstructural and a previously developed biventricular finite element model of the same rat heart were used to quantify the deformation of the cells during a cardiac cycle for a biomaterial elastic modulus (Einj) ranging between 4.1 and 405,900 kPa.

RESULTS

The transplanted cells' deformation was largest for Einj = 7.4 kPa, matching that of the cells, and decreased for an increase and decrease in Einj. The cell deformation was more sensitive to Einj changes for softer (Einj ≤ 738 kPa) than stiffer biomaterials.

CONCLUSIONS

Combining the microstructural and biventricular finite element models enables quantifying micromechanics of transplanted cells in the heart. The approach offers a broader scope for in silico investigations of biomaterial and cell therapies for myocardial infarction and other cardiac pathologies.

Improvement in cardiac function and regional LV strain following intramyocardial injection of a theranostic hydrogel early postmyocardial infarction in a porcine model

Myocardial infarction (MI) is often complicated by left ventricular (LV) remodeling and heart failure. We evaluated the feasibility of a multimodality imaging approach to guide delivery of an imageable hydrogel and assessed LV functional changes with therapy. Yorkshire pigs underwent surgical occlusions of branches of the left anterior descending and/or circumflex artery to create an anterolateral MI. We evaluated the hemodynamic and mechanical effects of intramyocardial delivery of an imageable hydrogel in the central infarct area (Hydrogel group, n = 8) and a Control group (n = 5) early post-MI. LV and aortic pressure and ECG were measured and contrast cineCT angiography was performed at baseline, 60 min post-MI, and 90 min post-hydrogel delivery. LV hemodynamic indices, pressure-volume measures, and normalized regional and global strains were measured and compared. Both Control and Hydrogel groups demonstrated a decline in heart rate, LV pressure, stroke volume, ejection fraction, and pressure-volume loop area, and an increase in myocardial performance (Tei) index and supply/demand (S/D) ratio. After hydrogel delivery, Tei index and S/D ratio were reduced to baseline levels, diastolic and systolic functional indices either stabilized or improved, and radial strain and circumferential strain increased significantly in the MI regions (ENrr: +52.7%, ENcc: +44.1%). However, the Control group demonstrated a progressive decline in all functional indices to levels significantly below those of Hydrogel group. Thus, acute intramyocardial delivery of a novel imageable hydrogel to MI region resulted in rapid stabilization or improvement in LV hemodynamics and function.NEW & NOTEWORTHY Our study demonstrates that contrast cineCT imaging can be used to evaluate the acute effects of intramyocardial delivery of a therapeutic hydrogel to the central MI region early post MI, which resulted in a rapid stabilization of LV hemodynamics and improvement in regional and global LV function.

CineCT platform for in vivo and ex vivo measurement of 3D high resolution Lagrangian strains in the left ventricle following myocardial infarction and intramyocardial delivery of theranostic hydrogel

Myocardial infarction (MI) produces acute changes in strain and stiffness within the infarct that can affect remote areas of the left ventricle (LV) and drive pathological remodeling. We hypothesized that intramyocardial delivery of a hydrogel within the MI region would lower wall stress and reduce adverse remodeling in Yorkshire pigs (n = 5). ^99mTc-Tetrofosmin SPECT imaging defined the location and geometry of induced MI and border regions in pigs, and in vivo and ex vivo contrast cine computed tomography (cineCT) quantified deformations of the LV myocardium. Serial in vivo cineCT imaging provided data in hearts from control pigs (n = 3) and data from pigs (n = 5) under baseline conditions before MI induction, post-MI day 3, post-MI day 7, and one hour after intramyocardial delivery of a hyaluronic acid (HA)-based hydrogel with shear-thinning and self-healing properties to the central infarct area. Isolated, excised hearts underwent similar cineCT imaging using an ex vivo perfused heart preparation with cyclic LV pressurization. Deformations were evaluated using nonlinear image registration of cineCT volumes between end-diastole (ED) and end-systole (ES), and 3D Lagrangian strains were calculated from the displacement gradients. Post-MI day 3, radial, circumferential, maximum principal, and shear strains were reduced within the MI region (p < 0.04) but were unchanged in normal regions (p > 0.6), and LV end diastolic volume (LV EDV) increased (p = 0.004), while ejection fraction (EF) and stroke volume (SV) decreased (p < 0.02). Post-MI day 7, radial strains in MI border zones increased (p = 0.04) and dilation of LV EDV continued (p = 0.052). There was a significant negative linear correlation between regional radial and maximum principal/shear strains and percent infarcted tissue in all hearts (R² > 0.47, p < 0.004), indicating that cineCT strain measures could predict MI location and degree of injury. Post-hydrogel day 7 post-MI, LV EDV was significantly reduced (p = 0.009), EF increased (p = 0.048), and radial (p = 0.021), maximum principal (p = 0.051), and shear strain (p = 0.047) increased within regions bordering the infarct. A smaller strain improvement within the infarct and normal regions was also noted on average along with an improvement in SV in 4 out of 5 hearts. CineCT provides a reliable method to assess regional changes in strains post-MI and the therapeutic effects of intramyocardial hydrogel delivery.

The role of regional myocardial topography post-myocardial infarction on infarct extension

Infarct extension involves necrosis of healthy myocardium in the border zone (BZ), progressively enlarging the infarct zone (IZ) and recruiting the remote zone (RZ) into the BZ, eventually leading to heart failure. The mechanisms underlying infarct extension remain unclear, but myocyte stretching has been suggested as the most likely cause. Using human patient-specific left-ventricular (LV) numerical simulations established from cardiac magnetic resonance imaging (MRI) of myocardial infarction (MI) patients, the correlation between infarct extension and regional mechanics abnormality was investigated by analysing the fibre stress-strain loops (FSSLs). FSSL abnormality was characterised using the directional regional external work (DREW) index, which measures FSSL area and loop direction. Sensitivity studies were also performed to investigate the effect of infarct stiffness on regional myocardial mechanics and potential for infarct extension. We found that infarct extension was correlated to severely abnormal FSSL in the form of counter-clockwise loop at the RZ close to the infarct, as indicated by negative DREW values. In regions demonstrating negative DREW values, we observed substantial fibre stretching in the isovolumic relaxation (IVR) phase accompanied by a reduced rate of systolic shortening. Such stretching in IVR phase in part of the RZ was due to its inability to withstand the high LV pressure that was still present and possibly caused by regional myocardial stiffness inhomogeneity. Further analysis revealed that the occurrence of severely abnormal FSSL due to IVR fibre stretching near the RZ-BZ boundary was due to a large amount of surrounding infarcted tissue, or an excessively stiff IZ.

How hydrogel inclusions modulate the local mechanical response in early and fully formed post-infarcted myocardium

Expansion of myocardium after myocardial infarction (MI) has long been identified as the primary mechanism that drives adverse left ventricular (LV) remodeling towards heart failure and death. Direct injection of hydrogels into the myocardium to mechanically constrain the infarct has demonstrated promise in limiting its remodeling and expansion. Despite early successes, there remain open questions in the determination of optimal hydrogel therapies, key application characteristics for which include injected polymer volume, stiffness, and spatial placement. Addressing these questions is complicated by the substantial variations in infarct type and extent, as well as limited understanding of the underlying mechanisms. Herein, we present an investigation on how hydrogel inclusions affect the effective tissue-level stiffness and strain fields in myocardium using full three-dimensional (3D) finite element simulations at early and late post-MI time points. We calibrated our simulations to triaxial mechanical and structural measurements of cuboidal LV myocardial specimens of post-infarcted myocardium, 0 and 4 weeks post-MI, injected with a dual-crosslinking hyaluronic acid-based hydrogel. Simulations included multiple deformation modes that spanned the anticipated physiological range in order to assess the effects of variations in inclusion size, location, and modulus on tissue-level myocardial mechanics. We observed significant local stiffening in the hydrogel-injected specimens that was highly dependent on the volume and mechanical properties of the injected hydrogel. Simulations revealed that the primary effect of the injections under physiological loading was a reduction in myocardial strain. This result suggests that hydrogel injections reduce infarct expansion by limiting the peak strains over the cardiac cycle. Overall, our study indicated that modulation of local effective tissue stiffness and corresponding strain reduction are governed by the volume and stiffness of the hydrogel, but relatively insensitive to its transmural placement. These findings provide important insights into mechanisms for ameliorating post-MI remodeling, as well as guidance for the future design of post-MI therapies.

Progressive Reinvention or Destination Lost? Half a Century of Cardiovascular Tissue Engineering

The concept of tissue engineering evolved long before the phrase was forged, driven by the thromboembolic complications associated with the early total artificial heart programs of the 1960s. Yet more than half a century of dedicated research has not fulfilled the promise of successful broad clinical implementation. A historical account outlines reasons for this scientific impasse. For one, there was a disconnect between distinct eras each characterized by different clinical needs and different advocates. Initiated by the pioneers of cardiac surgery attempting to create neointimas on total artificial hearts, tissue engineering became fashionable when vascular surgeons pursued the endothelialisation of vascular grafts in the late 1970s. A decade later, it were cardiac surgeons again who strived to improve the longevity of tissue heart valves, and lastly, cardiologists entered the fray pursuing myocardial regeneration. Each of these disciplines and eras started with immense enthusiasm but were only remotely aware of the preceding efforts. Over the decades, the growing complexity of cellular and molecular biology as well as polymer sciences have led to surgeons gradually being replaced by scientists as the champions of tissue engineering. Together with a widening chasm between clinical purpose, human pathobiology and laboratory-based solutions, clinical implementation increasingly faded away as the singular endpoint of all strategies. Moreover, a loss of insight into the healing of cardiovascular prostheses in humans resulted in the acceptance of misleading animal models compromising the translation from laboratory to clinical reality. This was most evident in vascular graft healing, where the two main impediments to the in-situ generation of functional tissue in humans remained unheeded–the trans-anastomotic outgrowth stoppage of endothelium and the build-up of an impenetrable surface thrombus. To overcome this dead-lock, research focus needs to shift from a biologically possible tissue regeneration response to one that is feasible at the intended site and in the intended host environment of patients. Equipped with an impressive toolbox of modern biomaterials and deep insight into cues for facilitated healing, reconnecting to the “user needs” of patients would bring one of the most exciting concepts of cardiovascular medicine closer to clinical reality.

Intra-myocardial alginate hydrogel injection acts as a left ventricular mid-wall constraint in swine

Despite positive initial outcomes emerging from preclinical and early clinical investigation of alginate hydrogel injection therapy as a treatment for heart failure, the lack of knowledge about the mechanism of action remains a major shortcoming that limits the efficacy of treatment design. To identify the mechanism of action, we examined previously unobtainable measurements of cardiac function from in vivo, ex vivo, and in silico states of clinically relevant heart failure (HF) in large animals. High-resolution ex vivo magnetic resonance imaging and histological data were used along with state-of-the-art subject-specific computational model simulations. Ex vivo data were incorporated in detailed geometric computational models for swine hearts in health (n = 5), ischemic HF (n = 5), and ischemic HF treated with alginate hydrogel injection therapy (n = 5). Hydrogel injection therapy mitigated elongation of sarcomere lengths (1.68 ± 0.10μm [treated] vs. 1.78 ± 0.15μm [untreated], p<0.001). Systolic contractility in treated animals improved substantially (ejection fraction = 43.9 ± 2.8% [treated] vs. 34.7 ± 2.7% [untreated], p<0.01). The in silico models realistically simulated in vivo function with >99% accuracy and predicted small myofiber strain in the vicinity of the solidified hydrogel that was sustained for up to 13 mm away from the implant. These findings suggest that the solidified alginate hydrogel material acts as an LV mid-wall constraint that significantly reduces adverse LV remodeling compared to untreated HF controls without causing negative secondary outcomes to cardiac function. STATEMENT OF SIGNIFICANCE: Heart failure is considered a growing epidemic and hence an important health problem in the US and worldwide. Its high prevalence (5.8 million and 23 million, respectively) is expected to increase by 25% in the US alone by 2030. Heart failure is associated with high morbidity and mortality, has a 5-year mortality rate of 50%, and contributes considerably to the overall cost of health care ($53.1 billion in the US by 2030). Despite positive initial outcomes emerging from preclinical and early clinical investigation of alginate hydrogel injection therapy as a treatment for heart failure, the lack of knowledge concerning the mechanism of action remains a major shortcoming that limits the efficacy of treatment design. To understand the mechanism of action, we combined high-resolution ex vivo magnetic resonance imaging and histological data in swine with state-of-the-art subject-specific computational model simulations. The in silico models realistically simulated in vivo function with >99% accuracy and predicted small myofiber strain in the vicinity of the solidified hydrogel that was sustained for up to 13 mm away from the implant. These findings suggest that the solidified alginate hydrogel material acts as a left ventricular mid-wall constraint that significantly reduces adverse LV remodeling compared to untreated heart failure controls without causing negative secondary outcomes to cardiac function. Moreover, if the hydrogel can be delivered percutaneously rather than via the currently used open-chest procedure, this therapy may become routine for heart failure treatment. A minimally invasive procedure would be in the best interest of this patient population; i.e., one that cannot tolerate general anesthesia and surgery, and it would be significantly more cost-effective than surgery.

A Preliminary Computational Investigation Into the Flow of PEG in Rat Myocardial Tissue for Regenerative Therapy

Myocardial infarction (MI), a type of cardiovascular disease, affects a significant proportion of people around the world. Traditionally, non-communicable chronic diseases were largely associated with aging populations in higher income countries. It is now evident that low- to middle-income countries are also affected and in these settings, younger individuals are at high risk. Currently, interventions for MI prolong the time to heart failure. Regenerative medicine and stem cell therapy have the potential to mitigate the effects of MI and to significantly improve the quality of life for patients. The main drawback with these therapies is that many of the injected cells are lost due to the vigorous motion of the heart. Great effort has been directed toward the development of scaffolds which can be injected alongside stem cells, in an attempt to improve retention and cell engraftment. In some cases, the scaffold alone has been seen to improve heart function. This study focuses on a synthetic polyethylene glycol (PEG) based hydrogel which is injected into the heart to improve left ventricular function following MI. Many studies in literature characterize PEG as a Newtonian fluid within a specified shear rate range, on the macroscale. The aim of the study is to characterize the flow of a 20 kDa PEG on the microscale, where the behavior is likely to deviate from macroscale flow patterns. Micro particle image velocimetry (μPIV) is used to observe flow behavior in microchannels, representing the gaps in myocardial tissue. The fluid exhibits non-Newtonian, shear-thinning behavior at this scale. Idealized two-dimensional computational fluid dynamics (CFD) models of PEG flow in microchannels are then developed and validated using the μPIV study. The validated computational model is applied to a realistic, microscopy-derived myocardial tissue model. From the realistic tissue reconstruction, it is evident that the myocardial flow region plays an important role in the distribution of PEG, and therefore, in the retention of material.

Construction and Validation of Subject-Specific Biventricular Finite-Element Models of Healthy and Failing Swine Hearts From High-Resolution DT-MRI

Predictive computational modeling has revolutionized classical engineering disciplines and is in the process of transforming cardiovascular research. This is particularly relevant for investigating emergent therapies for heart failure, which remains a leading cause of death globally. The creation of subject-specific biventricular computational cardiac models has been a long-term endeavor within the biomedical engineering community. Using high resolution (0.3 × 0.3 × 0.8 mm) ex vivo data, we constructed a precise fully subject-specific biventricular finite-element model of healthy and failing swine hearts. Each model includes fully subject-specific geometries, myofiber architecture and, in the case of the failing heart, fibrotic tissue distribution. Passive and active material properties are prescribed using hyperelastic strain energy functions that define a nearly incompressible, orthotropic material capable of contractile function. These materials were calibrated using a sophisticated multistep approach to match orthotropic tri-axial shear data as well as subject-specific hemodynamic ventricular targets for pressure and volume to ensure realistic cardiac function. Each mechanically beating heart is coupled with a lumped-parameter representation of the circulatory system, allowing for a closed-loop definition of cardiovascular flow. The circulatory model incorporates unidirectional fluid exchanges driven by pressure gradients of the model, which in turn are driven by the mechanically beating heart. This creates a computationally meaningful representation of the dynamic beating of the heart coupled with the circulatory system. Each model was calibrated using subject-specific experimental data and compared with independent in vivo strain data obtained from echocardiography. Our methods produced highly detailed representations of swine hearts that function mechanically in a remarkably similar manner to the in vivo subject-specific strains on a global and regional comparison. The degree of subject-specificity included in the models represents a milestone for modeling efforts that captures realism of the whole heart. This study establishes a foundation for future computational studies that can apply these validated methods to advance cardiac mechanics research.

Personalised computational cardiology: Patient-specific modelling in cardiac mechanics and biomaterial injection therapies for myocardial infarction

Predictive computational modelling in biomedical research offers the potential to integrate diverse data, uncover biological mechanisms that are not easily accessible through experimental methods and expose gaps in knowledge requiring further research. Recent developments in computing and diagnostic technologies have initiated the advancement of computational models in terms of complexity and specificity. Consequently, computational modelling can increasingly be utilised as enabling and complementing modality in the clinic—with medical decisions and interventions being personalised. Myocardial infarction and heart failure are amongst the leading causes of death globally despite optimal modern treatment. The development of novel MI therapies is challenging and may be greatly facilitated through predictive modelling. Here, we review the advances in patient-specific modelling of cardiac mechanics, distinguishing specificity in cardiac geometry, myofibre architecture and mechanical tissue properties. Thereafter, the focus narrows to the mechanics of the infarcted heart and treatment of myocardial infarction with particular attention on intramyocardial biomaterial delivery.

Fibrotic infarction on the LV free wall may alter the mechanics of healthy septal wall during passive filling

The effect of myocardial infarction on the global functioning of the heart is well known. Less is understood regarding the effect of LV fibrotic infarction on the cardiac mechanics of the septal wall. To determine this unknown, the stress and strain of septal wall on the healthy and infarcted rat heart model is measured by using finite element models of rat heart geometries. The main objective of this study was to utilized computational methods to study the effect of LV free wall fibrotic infarction on the healthy septal wall. Three-dimensional biventricular rat heart geometries were developed from cardiac magnetic resonance images of a healthy heart and a heart with left ventricular (LV) fibrotic infarction after infarct induction. From these geometries, FE models were established. Three-dimensional biventricular rat heart geometries developed from cardiac magnetic resonance images were used in creating FE models of healthy and infarcted rat hearts. The average radial strain percentage change of the healthy septal wall on the epicardium, mid-wall and endocardium was 61%, 52% and 14% higher than the infarcted septal wall, respectively. It was concluded that the fibrotic infarction has a potential cause the malfunction of the heart due to high myocardial stress and strain that the septal wall experiences.

Ventricular wall biomaterial injection therapy after myocardial infarction: Advances in material design, mechanistic insight and early clinical experiences

Intramyocardial biomaterial injection therapy for myocardial infarction has made significant progress since concept initiation more than 10 years ago. The interim successes and progress in the first 5 years have been extensively reviewed. During the last 5 years, two phase II clinical trials have reported their long term follow up results and many additional biomaterial candidates have reached preclinical and clinical testing. Also in recent years deeper investigations into the mechanisms behind the beneficial effects associated with biomaterial injection therapy have been pursued, and a variety of process and material parameters have been evaluated for their impact on therapeutic outcomes. This review explores the advances made in this biomaterial-centered approach to ischemic cardiomyopathy and discusses potential future research directions as this therapy seeks to positively impact patients suffering from one of the world's most common sources of mortality.

Excessive volume of hydrogel injectates may compromise the efficacy for the treatment of acute myocardial infarction

Biomaterial injectates are promising as a therapy for myocardial infarction to inhibit the adverse ventricular remodeling. The current study explored interrelated effects of injectate volume and infarct size on treatment efficacy. A finite element model of a rat heart was utilized to represent ischemic infarcts of 10%, 20%, and 38% of left ventricular wall volume and polyethylene glycol hydrogel injectates of 25%, 50%, and 75% of the infarct volume. Ejection fraction was 49.7% in the healthy left ventricle and 44.9%, 46.4%, 47.4%, and 47.3% in the untreated 10% infarct and treated with 25%, 50%, and 75% injectate, respectively. Maximum end-systolic infarct fiber stress was 41.6, 53.4, 44.7, 44.0, and 45.3 kPa in the healthy heart, the untreated 10% infarct, and when treated with the three injectate volumes, respectively. Treating the 10% and 38% infarcts with the 25% injectate volume reduced the maximum end-systolic fiber stress by 16.3% and 34.7% and the associated strain by 30.2% and 9.8%, respectively. The results indicate the existence of a threshold for injectate volume above which efficacy does not further increase but may decrease. The efficacy of an injectate in reducing infarct stress and strain changes with infarct size. Copyright © 2016 John Wiley & Sons, Ltd.

PET imaging of a collagen matrix reveals its effective injection and targeted retention in a mouse model of myocardial infarction

Injectable biomaterials have shown promise for cardiac regeneration therapy. However, little is known regarding their retention and distribution upon application in vivo. Matrix imaging would be useful for evaluating these important properties. Herein, hexadecyl-4-[(18)F]fluorobenzoate ((18)F-HFB) and Qdot labeling was used to evaluate collagen matrix delivery in a mouse model of myocardial infarction (MI). At 1 wk post-MI, mice received myocardial injections of (18)F-HFB- or Qdot-labeled matrix to assess its early retention and distribution (at 10 min and 2h) by positron emission tomography (PET), or fluorescence imaging, respectively. PET imaging showed that the bolus of matrix at 10 min redistributed evenly within the ischemic territory by 2h. Ex vivo biodistribution revealed myocardial matrix retention of ∼ 65%, which correlated with PET results, but may be an underestimate since (18)F-HFB matrix labeling efficiency was ∼ 82%. For covalently linked Qdots, labeling efficiency was ∼ 96%. Ex vivo Qdot quantification showed that ∼ 84% of the injected matrix was retained in the myocardium. Serial non-invasive PET imaging and validation by fluorescence imaging confirmed the effectiveness of the collagen matrix to be retained and redistributed within the infarcted myocardium. This study identifies matrix-targeted imaging as a promising modality for assessing the biodistribution of injectable biomaterials for application in the heart.

Engineering the extracellular matrix for clinical applications: endoderm, mesoderm, and ectoderm

Tissue engineering is rapidly progressing from a research-based discipline to clinical applications. Emerging technologies could be utilized to develop therapeutics for a wide range of diseases, but many are contingent on a cell scaffold that can produce proper tissue ultrastructure. The extracellular matrix, which a cell scaffold simulates, is not merely a foundation for tissue growth but a dynamic participant in cellular crosstalk and organ homeostasis. Cells change their growth rates, recruitment, and differentiation in response to the composition, modulus, and patterning of the substrate on which they reside. Cell scaffolds can regulate these factors through precision design, functionalization, and application. The ideal therapy would utilize highly specialized cell scaffolds to best mimic the tissue of interest. This paper discusses advantages and challenges of optimized cell scaffold design in the endoderm, mesoderm, and ectoderm for clinical applications in tracheal transplant, cardiac regeneration, and skin grafts, respectively.