Molecular Point-of-Care Assay Development: Design and Considerations

Molecular diagnostic point-of-care (MDx POC) testing is gaining momentum and is increasingly important for infectious disease detection and monitoring, as well as other diagnostic areas such as oncology. Molecular testing has traditionally required high-complexity laboratories. Laboratory testing complexity is determined by utilizing the Clinical Laboratory Improvement Amendments of 1988 (CLIA) Categorization Criteria scorecard, utilizing seven criteria that are scored on a scale of one to three. Previously, most commercially available point-of-care (POC) tests use other analytes and technologies that were not found to be highly complex by the CLIA scoring system. However, during the COVID-19 pandemic, MDx POC testing became much more prominent. Utilization during the COVID-19 pandemic has demonstrated that MDx POC testing applications can have outstanding advantages compared to available non-molecular POC diagnostic tests. This article introduces MDx POC testing to students, technologists, researchers, and others, providing a general algorithm for MDx POC test development. This algorithm is an introductory, step-by-step decision tree for defining a molecular POC diagnostic device meeting the functional requirements for a desired application. The technical considerations driving the decision-making include nucleic acid selection method (DNA, RNA), extraction methods, sample preparation, number of targets, amplification technology, and detection method. The scope of this article includes neither higher-order multiplexing, nor quantitative molecular analysis. This article covers key application considerations, such as sensitivity, specificity, turnaround time, and shipping/storage requirements. This article provides an overall understanding of the best resources and practices to use when developing a MDx POC assay that may be a helpful resource for readers without extensive molecular testing experience as well as for those who are already familiar with molecular testing who want to increase MDx availability at the POC. © 2024 Wiley Periodicals LLC.

Methods for detection and quantification of gelatin from different sources

Gelatin is a water-soluble protein obtained from the collagen of various animal origins (porcine, bovine, fish, donkey, horse, and deer hide) and has diverse applications in the food, pharmaceutical, and cosmetics industries. Porcine and bovine gelatins are extensively used in food and non-food products; however, their acceptance is limited due to religious prohibitions, whereas fish gelatin is accepted in all religions. In Southeast Asia, especially in China, gelatin obtained from donkey and deer skins is used in medicines. However, both sources suffer from adulteration (mixing different sources of gelatin) due to their limited availability and high cost. Unclear labeling and limited information about actual gelatin sources in gelatin-containing products cause serious concern among societies for halal and fraud authentication of gelatin sources. Therefore, authenticating gelatin sources in gelatin-based products is challenging due to close similarities between the composition differences and degradation of DNA and protein biomarkers in processed gelatin. Thus, different methods have been proposed to identify and quantify different gelatin sources in pharmaceutical and food products. To the best of our knowledge, this systematic and comprehensive review highlights different authentication techniques and their limitations in gelatin detection and quantification in various commercial products. This review also describes halal authentication and adulteration prevention strategies of various gelatin sources, mainly focussing on research gaps, challenges, and future directions in this research area.

CRISPR-Cas9 Genome Editing and Rapid Selection of Cell Pools

The harnessing of the CRISPR-Cas9 system allows for quick and inexpensive genome editing in tissue culture models. Traditional CRISPR-Cas9 genome editing techniques rely on the ability of single progenitor cells to expand into new pools in a process known as clonal expansion. This is a significant technical challenge that is difficult to overcome for nontransformed cell culture models such as Drosophila ovarian somatic sheath cells (OSCs). OSCs are a unique ex vivo model for epigenetic regulation by PIWI-interacting RNAs (piRNAs) that establish restriction of mobile genetic elements in germ cells to protect genome integrity. Here, we provide a protocol to generate endogenously tagged proteins and gene knockouts without the need for clonal selection. We combine CRISPR-Cas genome editing and knockin of antibiotic selection markers to generate edited cell pools. At the example of Drosophila piwi in OSCs, we demonstrate a strategy that relies on the insertion of an artificial intron to accommodate a selection marker with minimal disturbance of the resulting mRNA. In brief, our donor cassette contains a peptide tag and an optimized intron that accommodates a selection marker driven by an independent promoter on the other genomic strand. The selection marker is transcribed as an independent mRNA, and the intron is efficiently removed from the mRNA encoding the endogenously tagged (endo-tagged) piwi gene. The endo-tagged Piwi protein is expressed at wild-type levels and appropriately localizes to the nucleus of OSCs. We also describe strategies for C-terminal tagging and generation of knockout alleles in OSCs and in human embryonic kidney cells, discuss different design strategies, and provide a plasmid toolkit (available at Addgene). Our protocol enables robust genome editing in OSCs for the first time and provides a simple and time-saving alternative for other cell culture systems. Published 2022. This article is a U.S. Government work and is in the public domain in the USA. Basic Protocol 1: Design and cloning of single-guide RNA plasmids Basic Protocol 2: Design and cloning of donor template plasmids for epitope tagging Alternate Protocol: Design and cloning of donor template plasmids for gene knockout Basic Protocol 3: Transfection and selection of edited cell pools.

Highly Selective, CRISPR/Cas9-Mediated Isolation of Genes and Genomic Loci from Complex Genomes by TAR Cloning in Yeast

Here we describe an updated TAR cloning protocol for the selective and efficient isolation of any genomic fragment or gene of interest up to 280 kb in size from genomic DNA. The method exploits the special recombination machinery of the yeast Saccharomyces cerevisiae. TAR cloning is based on the high level of in vivo recombination that occurs between a specific genomic DNA fragment of interest and targeting sequences (hooks) in a TAR vector that are homologous to the 5' and 3' ends of the targeted region. Upon co-transformation into yeast, this results in the isolation of the chromosomal region of interest as a circular YAC molecule, which then propagates and segregates in yeast cells and can be selected for. In the updated TAR cloning protocol described here, the fraction of region-positive clones typically obtained is increased from 1% up to 35% by pre-treatment of the genomic DNA with specifically designed CRISPR/Cas9 endonucleases that create double-strand breaks (DSBs) bracketing the target genomic DNA sequence, thereby making the ends of the chromosomal region of interest highly recombinogenic. In addition, a new TAR vector was constructed that contains YAC and BAC cassettes, permitting direct transfer of a TAR-cloned DNA from yeast to bacterial cells. Once the TAR vector with the hooks is constructed and genomic DNA is prepared, the entire procedure takes 3 weeks to complete. The updated TAR protocol does not require significant yeast experience or extensively time-consuming yeast work because screening only about a dozen yeast transformants is typically enough to find a clone with the region of interest. TAR cloning of chromosomal fragments, individual genes, or gene families can be used for functional, structural, and population studies, for comparative genomics, and for long-range haplotyping, and has potential for gene therapy. Published 2021. This article is a U.S. Government work and is in the public domain in the USA. Current Protocols published by Wiley Periodicals LLC. Basic Protocol 1: Preparation of CRISPR/Cas9-treated genomic DNA for TAR cloning Basic Protocol 2: Isolation of a gene or genomic locus by TAR cloning Basic Protocol 3: Transfer of TAR/YAC/BAC isolates from yeast to E. coli.

Vibrio parahaemolyticus: Basic Techniques for Growth, Genetic Manipulation, and Analysis of Virulence Factors

Vibrio parahaemolyticus is a Gram-negative, halophilic bacterium and opportunistic pathogen of humans and shrimp. Investigating the mechanisms of V. parahaemolyticus infection and the multifarious virulence factors it employs requires procedures for bacterial culture, genetic manipulation, and analysis of virulence phenotypes. Detailed protocols for growth assessment, generation of mutants, and phenotype assessment are included in this article. © 2020 Wiley Periodicals LLC. Basic Protocol 1: Assessment of growth of V. parahaemolyticus Alternate Protocol 1: Assessment of growth of V. parahaemolyticus using a plate reader Basic Protocol 2: Swimming/swarming motility assay Basic Protocol 3: Genetic manipulation Alternate Protocol 2: Natural transformation Basic Protocol 4: Secretion assay and sample preparation for mass spectrometry analysis Basic Protocol 5: Invasion assay (gentamicin protection assay) Basic Protocol 6: Immunofluorescence detection of intracellular V. parahaemolyticus Basic Protocol 7: Cytotoxicity assay for T3SS2.

Counter-Selection Method for Markerless Allelic Exchange in Bordetella bronchiseptica Based on sacB Gene From Bacillus subtilis

Bordetella bronchiseptica is a gram-negative bacterium that causes respiratory tract infections. It is a natural pathogen of a wide variety of mammals, including some used as laboratory models. This makes B. bronchiseptica an ideal organism to study pathogen-host interactions in order to unveil molecular mechanisms behind pathogenic processes. Even though genetic engineering is an essential tool in this area, there are just a few reports about genome manipulation techniques in this organism. In this article we describe an allelic exchange protocol based on double crossover recombination facilitated by the Bacillus subtilis sacB gene that can be applied for partial or complete gene knockouts, single-nucleotide mutations, or even introduction of coding sequences for transcriptional fusions. In contrast to previously employed techniques, this protocol renders genetically manipulated chromosomes without foreign DNA and enables the construction of successive genome manipulation using the same vector backbone. The entire procedure has been developed for fast and reliable manipulations with a total duration of 2 weeks. © 2020 Wiley Periodicals LLC. Basic Protocol 1: Setting up strains Basic Protocol 2: Homologous recombination (first crossing-over) Alternate Protocol: B. bronchiseptica electroporation Basic Protocol 3: Screening for sucrose-sensitive clones Basic Protocol 4: Homologous recombination (second crossing-over) Basic Protocol 5: PCR screening of putative marker-exchange mutants Support Protocol: Electrocompetent cell preparation.

SERS-Based Biosensors for Virus Determination with Oligonucleotides as Recognition Elements

Viral infections are among the main causes of morbidity and mortality of humans; sensitive and specific diagnostic methods for the rapid identification of viral pathogens are required. Surface-enhanced Raman spectroscopy (SERS) is one of the most promising techniques for routine analysis due to its excellent sensitivity, simple and low-cost instrumentation and minimal required sample preparation. The outstanding sensitivity of SERS is achieved due to tiny nanostructures which must be assembled before or during the analysis. As for specificity, it may be provided using recognition elements. Antibodies, complimentary nucleic acids and aptamers are the most usable recognition elements for virus identification. Here, SERS-based biosensors for virus identification with oligonucleotides as recognition elements are reviewed, and the potential of these biosensors is discussed.

A Cell Culture Platform for the Cultivation of Cryptosporidium parvum

Cryptosporidium is a genus of ubiquitous unicellular parasites belonging to the phylum Apicomplexa. Cryptosporidium species are the second largest cause of childhood diarrhea and are associated with increased morbidity. Accompanying this is the low availability of treatment and lack of vaccines. The major barrier to developing effective treatment is the lack of reliable in vitro culture methods. Recently, our lab has successfully cultivated C. parvum in the esophageal cancer-derived cell line COLO-680N, and has been able to maintain infection for several weeks. The success of this cell line was assessed with a combination of various techniques including fluorescent microscopy and qPCR. In addition, to tackle the issue of long-term oocyst production in vitro, a simple, low-cost bioreactor system using the COLO-680N cell line was established, which produced infectious oocysts for 4 months. This chapter provides details on the methodologies used to culture, maintain, and assess Cryptosporidium infection and propagation in COLO-680N. © 2019 by John Wiley & Sons, Inc.