Autoxidation of Cyclohexane: Conventional Views Challenged by Theory and Experiment

Reaction pathways leading to HPALD intermediates in the OH-initiated oxidation of isoprene

In this study, we revisited the mechanism of isoprene oxidation by OH radicals, focusing on the formation of hydroperoxyaldehydes (HPALDs) in the reactions following O2-addition at the α-position to Z,Z'-OH-allyl radical products of the 1,6-H shift of the 1st-generation Z-δ-OH-isoprenylperoxy radicals. Utilizing high-level ab initio quantum chemical calculations and a master equation approach, we provide theoretical confirmation that the formation of δ-HPALDs dominates by far and show that production of β-HPALDs by the mechanism proposed by Wennberg et al. (Chem. Rev., 2018, 118, 3337-3390) is negligible. Besides the dominance of the δ-HPALD formation channel, our investigation also reveals a novel though minor reaction channel resulting in the formation of an allylic δ-hydroperoxy acid and OH radical. Of primary importance for the assessment of the respective channels is the identification of a chemically activated mechanism driving the δ-HPALD formation process under atmospheric conditions. Different from traditional thermally activated pathways, we found that the rovibrationally hot peroxy radicals resulting from O2 addition to Z,Z'-OH-allyl radicals undergo prompt rearrangement and decomposition at a rate faster than their collisional relaxation, predominantly yielding δ-HPALDs in a chemically activated manner with high efficiency under atmospheric conditions.

Direct Photocatalyzed Hydrogen Atom Transfer (HAT) for Aliphatic C-H Bonds Elaboration

Direct photocatalyzed hydrogen atom transfer (d-HAT) can be considered a method of choice for the elaboration of aliphatic C–H bonds. In this manifold, a photocatalyst (PC_HAT) exploits the energy of a photon to trigger the homolytic cleavage of such bonds in organic compounds. Selective C–H bond elaboration may be achieved by a judicious choice of the hydrogen abstractor (key parameters are the electronic character and the molecular structure), as well as reaction additives. Different are the classes of PCs_HAT available, including aromatic ketones, xanthene dyes (Eosin Y), polyoxometalates, uranyl salts, a metal-oxo porphyrin and a tris(amino)cyclopropenium radical dication. The processes (mainly C–C bond formation) are in most cases carried out under mild conditions with the help of visible light. The aim of this review is to offer a comprehensive survey of the synthetic applications of photocatalyzed d-HAT.

Selective Cl-Decoration on Nanocrystal Facets of Hematite for High-Efficiency Catalytic Oxidation of Cyclohexane: Identification of the Newly Formed Cl-O as Active Sites

Understanding the structure-reactivity relationship at the atomic scale is of great theoretical importance for rational design of highly active catalysts, which has long been a central concern in catalysis communities and interface science. Herein, we developed a high-efficiency catalyst for catalytic oxidation of C₆H₁₂ by poststructural decoration on well-defined single-crystal facets of hematite. Especially for Cl-decorated {012} facets, the conversion and KA oil selectivity are improved about 3.4 times and 2 times, respectively. A better catalytic performance of the newly formed active site is derived from the charge difference between Cl and the neighboring outmost O atoms, which is affected by the geometric and electronic structures of the original catalyst surface. Based on the experimental results and the theoretical analysis, we concluded that the contribution of various O terminations to Cl-decoration follows the order O(I) > O(III) > O(II). Cl-decorated {001} facets show the highest intrinsic activity, whereas Cl-decorated {012} facets show the best catalytic performance because of their more active sites for Cl-decoration.

Ruthenium Trichloride Catalyst in Water: Ru Colloids versus Ru Dimer Characterization Investigations

An easy-to-prepare ruthenium catalyst obtained from ruthenium(III) trichloride in water demonstrates efficient performances in the oxidation of several cycloalkanes with high selectivity toward the ketone. In this work, several physicochemical techniques were used to demonstrate the real nature of the ruthenium salt still unknown in water and to define the active species for this Csp³-H bond functionalization. From transmission electron microscopy analyses corroborated by SAXS analyses, spherical nanoobjects were observed with an average diameter of 1.75 nm, thus being in favor of the formation of reduced species. However, further investigations, based on X-ray scattering and absorption analyses, showed no evidence of the presence of a metallic Ru-Ru bond, proof of zerovalent nanoparticles, but the existence of Ru-O and Ru-Cl bonds, and thus the formation of a water-soluble complex. The EXAFS (extended X-ray absorption fine structure) spectra revealed the presence of an oxygen-bridged diruthenium complex [Ru(OH) _xCl_{3- x}]₂(μ-O) with a high oxidation state in agreement with catalytic results. This study constitutes a significant advance to determine the true nature of the RuCl₃·3H₂O salt in water and proves once again the invasive nature of the electron beam in microscopy experiments, routinely used in nanochemistry.

Density functional theory study of selective aerobic oxidation of cyclohexane: the roles of acetic acid and cobalt ion

A computational study of cyclohexane autoxidation and catalytic oxidation to a cyclohexyl hydroperoxide intermediate (CyOOH), cyclohexanol, and cyclohexanone has been conducted using a hybrid density functional theory method. The activation of cyclohexane and O₂ is the rate-determining step in the formation of CyOOH due to its relatively high energy barrier of 41.2 kcal/mol, and the subsequent reaction behavior of CyOOH controls whether the production of cyclohexanol or cyclohexanone is favored. Using CH₃COOH or (CH₃COO)₂Co as a catalyst reduces the energy barriers required to activate cyclohexane and O₂ by 4.1 or 7.9 kcal/mol, respectively. Employing CH₃COOH improves the CyOOH intramolecular dehydration process, which favors the formation of cyclohexanone. The energy barrier to the decomposition of CyOOH to CyO·, an important precursor of cyclohexanol, decreases from 35.5 kcal/mol for autoxidation to 25.9 kcal/mol for (CH₃COO)₂Co catalysis. (CH₃COO)₂Co promotes the autoxidation process via a radical chain mechanism. The computational results agree with experimental observations quite well, revealing the underlying role of CH₃COOH and Co ion in cyclohexane oxidation. Graphical abstract Through DFT analysis of cyclohexane autoxidation and catalytic oxidation, we reveal the mechanism of the effects of CH₃COOH and Co²⁺ on the reaction routes.

Photooxidation of Cyclohexane by Visible and Near-UV Light Catalyzed by Tetraethylammonium Tetrachloroferrate

Tetraethylammonium tetrachloroferrate catalyzes the photooxidation of cyclohexane heterogeneously, exhibiting significant photocatalysis even in the visible portion of the spectrum. The photoproducts, cyclohexanol and cyclohexanone, initially develop at constant rates, implying that the ketone and the alcohol are both primary products. The yield is improved by the inclusion of 1% acetic acid in the cyclohexane. With small amounts of catalyst, the reaction rate increases with the amount of catalyst employed, but then passes through a maximum and decreases, due to increased reflection of the incident light. The reaction rate also passes through a maximum as the percentage of dioxygen above the sample is increased. This behavior is due to quenching by oxygen, which at the same time is a reactant. Under one set of reaction conditions, the photonic efficiency at 365 nm was 0.018 mol/Einstein. Compared to TiO2 as a catalyst, Et4N[FeCl4] generates lower yields at wavelengths below about 380 nm, but higher yields at longer wavelengths. Selectivity for cyclohexanol is considerably greater with Et4N[FeCl4], and oxidation does not proceed past cyclohexanone.

Surface organometallic chemistry in heterogeneous catalysis

Surface organometallic chemistry has been reviewed with a special focus on environmentally relevant transformations (C–H activation, CO₂conversion, oxidation).

Unravelling the radical transition during the carbon-catalyzed oxidation of cyclohexane by in situ electron paramagnetic resonance in the liquid phase

The selective oxidation of hydrocarbons is of great importance in the chemical industry.

Challenges in polyoxometalate-mediated aerobic oxidation catalysis: catalyst development meets reactor design

Current challenges and future directions i of polyoxometalates for selective aerobic oxidation catalysis is discussed with an emphasis on catalyst and reactor design.

Synergistic effect of co-reactant promotes one-step oxidation of cyclohexane into adipic acid catalyzed by manganese porphyrins

The synergistic effect of cyclohexane and cyclohexanone promoted synthesis of adipic acid catalyzed by [MnIIIT(p-Cl)PP]Cl with cyclohexane and cyclohexanone as co-reactants. The results showed that the conversions of cyclohexane and cyclohexanone were significantly enhanced because of the cyclohexanone synergistic effect, and the higher selectivity to adipic acid was obtained with dioxygen as an oxidant. The studies indicated that the co-oxidation of cyclohexane and cyclohexanone was influenced by the initial molar ratio of cyclohexanone and cyclohexane, catalyst structure, catalyst concentrations, and reaction conditions. The preliminary mechanism of the co-oxidation reaction of cyclohexane and cyclohexanone using [MnIIIT(p-Cl)PP]Cl as the catalyst was proposed.

Effect of L-cysteine on the oxidation of cyclohexane catalyzed by manganeseporphyrin

Effect of L-cysteine as the cocatalyst on the oxidation of cyclohexane by tert-butylhydroperoxide (TBHP) catalyzed by manganese tetraphenylporphyrin (MnTPP) has been investigated. The results showed that L-cysteine could moderately improve the catalytic activity of MnTPP and significantly increase the selectivity of cyclohexanol. Different from imidazole and pyridine, the L-cysteine may perform dual roles in the catalytic oxidation of cyclohexane. Besides as the axial ligand for MnTPP, the L-cysteine could also react with cyclohexyl peroxide formed as the intermediate to produce alcohol as the main product.

Understanding of the low temperature auto-oxidation scheme of sec-alcohols based on a Cu(ii)-MOF with open metal sites

Confirmation of a low temperaturesec-alcohol auto-oxidation scheme based on a Cu(ii)-MOF with metal open sites.

Theoretical design of multi-nitroxyl organocatalysts with enhanced reactivity for aerobic oxidation

Higher catalytic performances of N,N',N''-trihydroxyisocyanuric acid (THICA), N,N-dihydroxypyromellitimide (NDHPI), and N-hydroxynaphthalimide (NHNI) than that of N-hydroxyphthalimide (NHPI) have been demonstrated recently in aerobic oxidation. Herein, the rational design of reactive multi-nitroxyl organocatalysts has been addressed theoretically by using systematic analysis of some important properties and catalytic activities of yet-to-be-synthesized catalysts. Our results show that 1) NHNI and its analogue, similar to THICA, unlike NHPI and others, are unsuitable for solvent- or mediator-free catalysis due to their strong intramolecular hydrogen-bonding interactions; 2) increasing the reactive hydroxyimide groups on the same aromatic ring, or doped N atoms or ionic-pair groups onto the aromatic ring, can improve catalytic reactivity, whereas appropriate enlargement of conjugated aromatic systems results in unchanged activity; 3) the newly designed catalysts are more active than NHPI and NHNI and have catalytic activities comparable to NDHPI and THICA; 4) the ionic-pair supported case is suggested to be a very active catalyst, even towards inert propane, and can be used as a novel model catalyst for further improvements. The present work will be helpful in designing reactive hydroxyimide organocatalysts.

Iron-molybdenum-oxo complexes as initiators for olefin autoxidation with O2

The reaction between [(TPA)Fe(MeCN)2](OTf)2 and [nBu4N](Cp*MoO3) yields the novel tetranuclear complex [(TPA)Fe(μ-Cp*MoO3)]2(OTf)2, 1, with a rectangular [Mo-O-Fe-O-]2 core containing high-spin iron(ii) centres. 1 proved to be an efficient initiator/(pre)catalyst for the autoxidation of cis-cyclooctene with O2 to give cyclooctene epoxide. To test, which features of 1 are essential in this regard, analogues with zinc(ii) and cobalt(ii) central atoms, namely [(TPA)Zn(Cp*MoO3)](OTf), 3, and [(TPA)Co(Cp*MoO3)](OTf), 4, were prepared, which proved to be inactive. The precursor compounds of 1, [(TPA)Fe(MeCN)2](OTf)2 and [nBu4N](Cp*MoO3) as well as Cp2*Mo2O5, were found to be inactive, too. Reactivity studies in the absence of cyclooctene revealed that 1 reacts both with O2 and PhIO via loss of the Cp* ligands to give the triflate salt 2 of the known cation [((TPA)Fe)2(μ-O)(μ-MoO4)](2+). The cobalt analogue 4 reacts with O2 in a different way yielding [((TPA)Co)2(μ-Mo2O8)](OTf)2, 5, featuring a Mo2O8(4-) structural unit which is novel in coordination chemistry. The compound [(TPA)Fe(μ-MoO4)]2, 6, being related to 1, but lacking Cp* ligands failed to trigger autoxidation of cyclooctene. However, initiation of autoxidation by Cp* radicals was excluded via experiments including thermal dissociation of Cp2*.

Coordination frameworks assembled from CuII ions and H2-1,3-bdpb ligands: X-ray and magneto structural investigations, and catalytic activity in the aerobic oxidation of tetralin

CFA-5, a novel MOF containing Cu(ii) ions and pyrazolate ligands, shows heterogeneous catalytic activity in the liquid-phase aerobic oxidation of tetralin.

Oxidation of hydrocarbons with H2O2/O2 catalyzed by osmium complexes containing p-cymene ligands in acetonitrile

Osmium π-complexes containing p-cymene ligands efficiently catalyze (TONs up to 200 000) the oxidation of alkanes to alkyl hydroperoxides with H₂O₂.

Cyclohexane oxidation using Au/MgO: an investigation of the reaction mechanism

The liquid phase oxidation of cyclohexane was undertaken using Au/MgO and the reaction mechanism was investigated by means of continuous wave (CW) EPR spectroscopy employing the spin trapping technique. Activity tests aimed to determine the conversion and selectivity of Au/MgO catalyst showed that Au was capable of selectivity control to cyclohexanol formation up to 70%, but this was accompanied by a limited enhancement in conversion when compared with the reaction in the absence of catalyst. In contrast, when radical initiators were used, in combination with Au/MgO, an activity comparable to that observed in industrial processes at ca. 5% conversion was found, with retained high selectivity. By studying the free radical autoxidation of cyclohexane and the cyclohexyl hydroperoxide decomposition in the presence of spin traps, we show that Au nanoparticles are capable of an enhanced generation of cyclohexyl alkoxy radicals, and the role of Au is identified as a promoter of the catalytic autoxidation processes, therefore demonstrating that the reaction proceeds via a radical chain mechanism.

Generation of an isolable, monomeric manganese(V)-oxo complex from O2 and visible light

The direct conversion of a Mn(III) complex [(TBP(8)Cz)Mn(III) (1)] to a Mn(V)-oxo complex [(TBP(8)Cz)Mn(V)(O) (2)] with O(2) and visible light is reported. Complex 1 is also shown to function as an active photocatalyst for the oxidation of PPh(3) to OPPh(3). Mechanistic studies indicate that the photogeneration of 2 does not involve singlet oxygen but rather likely occurs via a free-radical mechanism upon photoactivation of 1.