Substrate Influence for the Zn-tetraphenyl-porphyrin Adsorption Geometry and the Interface-Induced Electron Transfer

Ordered assembly of non-planar vanadyl-tetraphenylporphyrins on ultra-thin iron oxide

Stabilizing ordered assemblies of molecules represents the first step towards the construction of molecular devices featuring hybrid (organic-inorganic) interfaces where molecules can be easily functionalized in view of specific applications. Molecular layers of planar metal-tetraphenylporphyrins (MTPP) grown on an ultrathin iron oxide [namely Fe(001)-p(1 × 1)O] show indeed a high degree of structural order. The generality of such a picture is tested by exploiting non-planar porphyrins, such as vanadyl-TPP (VOTPP). These molecules feature a VO²⁺ ion in their center, with the O atom protruding out of the plane of the porphyrin ring. In this work, by employing diffraction, photoemission and X-ray absorption, we prove that non-planar VOTPP can nevertheless form a square and ordered superstructure, where porphyrin molecules lie flat with respect to the underlying substrate. Ab initio density functional theory simulations are used to elucidate the VO bond orientation with respect to the iron substrate.

Zinc(II) tetraphenylporphyrin on Au(111) investigated by scanning tunnelling microscopy and photoemission spectroscopy measurements

Porphyrins are a versatile class of molecules, which have attracted attention over the years due to their electronic, optical and biological properties. Self-assembled monolayers of porphyrins were widely studied on metal surfaces in order to understand the supramolecular organization of these molecules, which is a crucial step towards the development of devices starting from the bottom-up approach. This perspective could lead to tailor the interfacial properties of the surface, depending on the specific interaction between the molecular assembly and the metal surface. In this study, we revisit the investigation of the assembly of zinc-tetraphenylporphyrins on Au(111) in order to explore the adsorption of the molecular network on the noble metal substrate. The combined analysis of scanning tunneling microscopy (STM) imaging and core levels photoemission spectroscopy measurements support a peculiar arrangement of the ZnTPP molecular network, with Zn atoms occupying the bridge sites of the Au surface atoms. Furthermore, we prove that, at few-layers coverage, the interaction between the deposited layers allows a relevant molecular mobility of the adlayer, as observed by STM and supported by core levels photoemission analysis.

Ordered assembling of Co tetra phenyl porphyrin on oxygen-passivated Fe(001): from single to multilayer films

Tetra-phenyl prophyrins (TPP) are an interesting class of organic molecules characterized by a ring structure with a metal ion in their centre. An ordered growth of such molecules can be obtained even on metallic substrates by means of a proper modification of the reactive interface, as we demonstrated for ZnTPP molecules coupled to oxygen-passivated Fe(001) [G. Bussetti et al. Appl. Surf. Sci. 390, 856 (2016)]. More recently, we focused on CoTPP molecules, characterized by a not nil magnetic moment and therefore of potential interest for magnetic applications. As in the ZnTPP case, our results for one monolayer coverage report the formation of an ordered assembly of flat-lying molecules. However, some differences between the two molecular species are observed in the packing scheme and in the degree of electronic interaction with the substrate. With the aim of reaching, also for CoTPP, a comprehensive view of molecular organization on Fe, we complement here our previous investigations by following the growth of the CoTPP film for increasing coverage, showing that an ordered stacking of such molecules is indeed realized at least up to four molecular layers.

Engineering of Porphyrin Molecules for Use as Effective Cathode Interfacial Modifiers in Organic Solar Cells of Enhanced Efficiency and Stability

In the present work, we effectively modify the TiO₂ electron transport layer of organic solar cells with an inverted architecture using appropriately engineered porphyrin molecules. The results show that the optimized porphyrin modifier bearing two carboxylic acids as the anchoring groups and a triazine electron-withdrawing spacer significantly reduces the work function of TiO₂, thereby reducing the electron extraction barrier. Moreover, the lower surface energy of the porphyrin-modified substrate results in better physical compatibility between the latter and the photoactive blend. Upon employing porphyrin-modified TiO₂ electron transport layers in PTB7:PC₇₁BM-based organic solar cells we obtained an improved average power conversion efficiency up to 8.73%. Importantly, porphyrin modification significantly increased the lifetime of the devices, which retained 80% of their initial efficiency after 500 h of storage in the dark. Because of its simplicity and efficacy, this approach should give tantalizing glimpses and generate an impact into the potential of porphyrins to facilitate electron transfer in organic solar cells and related devices.

Filled and empty states of Zn-TPP films deposited on Fe(001)-p(1×1)O

Zn-tetraphenylporphyrin (Zn-TPP) was deposited on a single layer of metal oxide, namely an Fe(001)-p(1×1)O surface. The filled and empty electronic states were measured by means of UV photoemission and inverse photoemission spectroscopy on a single monolayer and a 20 monolayer thick film. The ionization energy and the electron affinity of the organic film were deduced and the interface dipole was determined and compared with data available in the literature.

In vacuo interfacial tetrapyrrole metallation

The metallation of tetrapyrroles at well-defined surfaces under ultra-high vacuum conditions represents an unconventional synthesis approach to achieve tetrapyrrole-based metal-organic complexes and architectures. Different protocols, pioneered over the last decade, and now widely applied in several fields, provide an elegant route to metallo-tetrapyrrole systems often elusive to conventional procedures and give access and exquisite insight into on-surface tetrapyrrole chemistry. As highlighted by the functionality of metallo-porphyrins in biological or other environments and by the eminent role of metallo-phthalocyanines in synthetic materials, the control on the metal centres incorporated into the macrocycle is of utmost importance to achieve tailored properties in tetrapyrrole-based nanosystems. In the on-surface scenario, precise metallation pathways were developed, including reactions of tetrapyrroles with metals supplied by physical vapour deposition, chemical vapour deposition or the tip of a scanning tunnelling microscope, and self-metallation by atoms of an underlying support. Herein, we provide a comprehensive overview of in vacuo tetrapyrrole metallation, addressing two-dimensional as well as three-dimensional systems. Furthermore, we comparatively assess the available library of on-surface metallation protocols and elaborate on the state-of-the-art methodology.

Functional K-doping of eumelanin thin films: Density functional theory and soft x-ray spectroscopy experiments in the frame of the macrocyclic protomolecule model [corrected]

We demonstrate the possibility to achieve the doping of eumelanin thin films through K(+) incorporation during the electrodeposition of the film. K-doping changes the optical properties of the eumelanin thin films, reducing the energy gap from 1.0 to 0.6 eV, with possible implications for the photophysical properties. We have identified the doping-related occupied and unoccupied electronic states and their spectral weight using resonant photoemission spectroscopy (ResPES) and x-ray absorption at the C and N K-edges (near edge x-ray absorption fine spectroscopy, NEXAFS). All data are consistently interpreted by ab initio calculations of the electronic structure within the frame of the macrocycle model developed for the eumelanin protomolecule. Our analysis puts in evidence the intercalation of K with one specific oligomer (a tetramer composed of one indolequinone and 3 hydroquinone monomers) in correspondence of the nitrogen macrocycle. The predicted variation of the tetramer spacing is also in agreement with the recent x-ray diffraction experiments. The charge donation from K to N and C atoms gives rise to new electronic states at the top of the valence band and in NEXAFS resonances of the unoccupied orbitals. The saturation of the tetramer macrocycles leaves an excess of K that bind to N and C atoms in alternative configurations, as witnessed by the occurrence of additional spectral features in the carbon-related ResPES measurements.

Supramolecular engineering through temperature-induced chemical modification of 2H-tetraphenylporphyrin on Ag(111): flat phenyl conformation and possible dehydrogenation reactions

Scratching the surface: Formation of a monolayer of 2H-tetraphenylporphyrins (2H-TPP) on Ag(111), either by sublimation of a multilayer in the range 525-600 K or by annealing (at the same temperature) a monolayer deposited at room temperature, induces a chemical modification of the molecules. Rotation of the phenyl rings into a flat conformation is observed and tentatively explained, by using DFT calculations, as a peculiar reaction due to molecular dehydrogenation.