A Facile One-Step Solvothermal Synthesis of SnO2/Graphene Nanocomposite and Its Application as an Anode Material for Lithium-Ion Batteries

Multinary nanocomposite of GO@SrO@CoCrO3@FeCr2O4@SnO2@SiO2 for superior electrochemical performance and water purification applications

Novel multinary nanocomposite using solvothermal method synthesized and studied for their use in supercapacitors and photocatalysis to degrade pollutants using characterization techniques XRD, SEM, EDX, FTIR, Raman, UV-Vis, Zeta potential and photoluminescence spectroscopy whereas electrochemical testing via EIS, CV and GCD analysis. Average crystalline size of 20.81 nm measured from XRD whereas EDX confirms GO suppression within nanocomposite. Mixed matrix like morphology is observable from SEM micrographs. The composite exhibited a band gap of 2.78 eV that could degrade MB dye at 94 % under direct sunlight consistent with first-order kinetics. Multiple distinctive peaks in FTIR spectra indicates various functional groups exsistence in the material alongwith zeta potential value of -17.9 mV. Raman spectra reveals D-band shifting to value 1361 cm-1 while the G-band shifts to 1598 cm-1 relative to GO. Furthermore electrochemical performance evaluated revealing electron transfer rate value 4.88 × 10-9 cms-1 with maximum capacitance about 7182 Fg-1 at a scan rate of 10 mVs-1 respectively. Power density ranges from 3591.18 to 2163 W/kg and energy density from 299 to 120 Wh/Kg as measured from GCD analysis. These findings indicates that novel multinary nanocomposite holds potential as an electrode material in supercapacitors and as a sunlight-driven photocatalyst for the degradation of water-borne organic pollutants.

One-step and room-temperature fabrication of carbon nanocomposites including Ni nanoparticles for supercapacitor electrodes

With the increasing importance of power storage devices, demand for the development of supercapacitors possessing both rapid reversible chargeability and high energy density is accelerating. Here we propose a simple process for the room temperature fabrication of pseudocapacitor electrodes consisting of a faradaic redox reaction layer on a metallic electrode with an enhanced surface area. As a model metallic electrode, an Au foil was irradiated with Ar+ ions with a simultaneous supply of C and Ni at room temperature, resulting in fine metallic Ni nanoparticles dispersed in the carbon matrix with local graphitization on the ion-induced roughened Au surface. A carbon layer including fine Ni nanoparticles acted as an excellent faradaic redox reaction layer and the roughened surface contributed to an increase in surface area. The fabricated electrode, which included only 14 μg cm-2 of Ni, showed a stored charge ability three times as large as that of the bulky Ni foil. Thus, it is believed that a carbon layer including Ni nanoparticles fabricated on the charge collective electrode with an ion-irradiation method is promising for the development of supercapacitors from the viewpoints of the reduced use of rare metal and excellent supercapacitor performance.

Advances in Graphene/Inorganic Nanoparticle Composites for Catalytic Applications

Graphene-based nanocomposites with inorganic (metal and metal oxide) nanoparticles leads to materials with high catalytic activity for a variety of chemical transformations. Graphene and its derivatives such as graphene oxide, highly reduced graphene oxide, or nitrogen-doped graphene are excellent support materials due to their high surface area, their extended π-system, and variable functionalities for effective chemical interactions to fabricate nanocomposites. The ability to fine-tune the surface composition for desired functionalities enhances the versatility of graphene-based nanocomposites in catalysis. This review summarizes the preparation of graphene/inorganic NPs based nanocomposites and their use in catalytic applications. We discuss the large-scale synthesis of graphene-based nanomaterials. We have also highlighted the interfacial electronic communication between graphene/inorganic nanoparticles and other factors resulting in increased catalytic efficiencies.

Enhancement of photocatalytic by Mn3O4 spinel ferrite decorated graphene oxide nanocomposites

Abstract

The hydrothermal process was used to prepare Mn3O4/x%GO nanocomposites (NC’s) having different ratios of the Mn3O4 nanoparticles (NP’s) on the surface of graphene oxide (GO) sheet. SEM image showed that the Mn3O4 NP’s were distributed over the surface of GO sheet. HRTEM images exhibited the lattice fringe arising from the (101) plane of the Mn3O4 NP’s having the interplanar d-spacing of 0.49 nm decorating on the surface of GO. The electronic absorption spectra of Mn3O4/x%GO NC’s also show broad bands from 250 to 550 nm. These bands arise from the d–d crystal field transitions of the tetrahedral Mn3+ species and indicate a distortion in the crystal structure. Photo-catalytic activity of spinel ferrite Mn3O4 NP’s by themselves was low but photo-catalytic activity is enhanced when the NP’s are decorating the GO sheet. Moreover, the Mn3O4/10%GO NC’s showed the best photo-catalytic activity. This result comes from the formation of Mn–O–C bond that confirm by FT-IR. This bond would facilitate the transfer of the photoelectrons from the surfaces of the NP’s to the GO sheets. PL emission which is in the violet–red luminescent region shows the creation of defects in the fabricated Mn3O4 NP’s nanostructures. These defects create the defect states to which electrons in the VB can be excited to when the CB. The best degradation efficiency was achieved by the Mn3O4 NP’s when they were used to decorate the GO sheets in the Mn3O4/10%GO NC’s solution.

Highlights

Graphic abstract

Graphene-semiconductor nanocomposites for cancer phototherapy

Being a carbon-based hybrid, graphene-semiconductor composites have attracted considerable attention in recent decades owing to their potential features such as high photosensitivity, extended light absorption, and effective separation of charge carriers, thus have been regarded as a promising platform for environmental and biomedical applications, respectively. In this mini-review, we first summarized the recent advancements in the development of graphene-based semiconductor nanocomposites via sol-gel, solution mixing, in situ growth, hydrothermal, and solvothermal approaches, and then comprehensively reviewed their potential light activated cancer phototherapeutic applications. Finally, we rationally analyze the current challenges and new perspectives for the future development of more effective phototherapeutic nanoagents. We hope to offer enriched information to harvest the utmost fascinating properties of graphene as a platform to construct efficient graphene/semiconductor hybrids for cancer phototherapy.

One step forward: How can functionalization enhance the adsorptive properties of graphene towards metallic ions and dyes?

Functionalized graphene and its derivatives have been subject of many recent studies investigating their use as scavenger of various industrial pollutants. Adsorption is a feasible treatment, which can employ a wide variety of materials as adsorbents. Additionally, graphene has been distinguished for its remarkable properties, such as mechanical resistance, flexibility and electric conductivity. A relevant aspect of functionalized graphene is related to its selectivity, resulting in increased removal rates of specific pollutants. Hence, the functionalization process of graphene nanosheets is the cutting edge of the materials and environmental sciences, promoting the development of innovative and highly capable sorbents. The purpose of this review is to assemble the available information about functionalized graphene nanomaterials used for the removal of water pollutants and to explore its wide potential. In addition, various optimal experimental conditions (solution pH, equilibrium time, adsorbent dosage) are discussed. In each topic, aspects of environmental protection of adsorption process were evaluated, as well as the most recent works, available from high impact journals in the field, have been explored. Additionally, the employment of natural compounds to functionalize, reduce and support graphene, was evaluated as green alternatives to chemicals.

One-pot synthesis of tin chalcogenide-reduced graphene oxide-carbon nanotube nanocomposite as anode material for lithium-ion batteries

In this study, a ternary tin chalcogenide (TC)–reduced graphene oxide (RGO)–carbon nanotube (CNT) nanocomposite was synthesized as a lithium-ion battery (LIB) anode by a simple one-step protocol.

Two dimensional carbon based nanocomposites as multimodal therapeutic and diagnostic platform: A biomedical and toxicological perspective

Graphene based nanocomposites have revolutionized cancer treatment, diagnosis and imaging owing to its good compatibility, elegant flexibility, high surface area, low mass density along with excellent combined additive effect of graphene with other nanomaterials. This review inculcates the type of graphene based nanocomposites and their fabrication techniques to improve its properties as photothermal and theranostic platform. With decades' efforts, many significant breakthroughs in the method of synthesis and characterization in addition to various functionalization options of graphene based nanocomposite have paved a solid foundation for their potential applications in the cancer therapy. This work intends to provide a thorough, up-to-date holistic discussion on correlation of breakthroughs with their biomedical applications and illustrate how to utilize these breakthroughs to address long-standing challenges in the clinical translation of nanomedicines. This review also emphasizes on graphene based nanocomposites based toxicity concerns pertaining to delivery platforms.

Graphene based adsorbents for remediation of noxious pollutants from wastewater

The contamination of water resources with noxious pollutants is a serious issue. Many aquatic systems are contaminated with different toxic inorganic and organic species; coming to wastewater from various anthropogenic sources such as industries, agriculture, mining, and domestic households. Keeping in view of this, wastewater treatment appears to the main environmental challenge. Adsorption is one of the most efficient techniques for removing all most all types of pollutants i.e. inorganics and organics. Nowadays, graphene and its composite materials are gaining importance as nano adsorbents. Graphene; a two-dimensional nanomaterial having single-atom graphite layer; has attracted a great interest in many application areas (including wastewater treatment) due to its unique physico-chemical properties. The present paper is focused on the remediation of noxious wastes from wastewater using graphene based materials as adsorbents, and it contains all the details on materials - i.e., from their synthesis to application in the field of wastewater treatment (removal of hazardous contaminants of different chemical nature - heavy and rare-earth metal ions, and organic compounds - from wastewater effluents. The efficiency of the adsorption and desorption of these substances is considered. Certainly, this article will be useful for nano environmentalist to design future experiments for water treatment.

Excimer ultraviolet-irradiated exfoliated graphite loaded with carbon-coated SnOx small nanoparticles as advanced anodes for high-rate-capacity lithium-ion batteries

This paper reports a fast and efficient excimer ultraviolet (EUV) radiation method to prepare carbon-coated mixed tin oxide-loaded exfoliated graphite (SnOx@C-G) nanocomposites. The SnOx small nanoparticles (SNPs) are isolated using oxidized sucrose and uniformly deposited onto mildly oxidized exfoliated graphite during the 20-minute EUV radiation process. XPS and ESR analyses suggest the existence of abundant oxygen vacancies in the SnOx SNPs. The electrochemical kinetics of SnOx@C-G, which are determined by in situ electrochemical impedance analysis, demonstrated a high reversible capacity of approximately 740 mA h g-1 after 250 cycles at a current density of 1.6 A g-1, and an impressive reversible rate performance exceeding 450 mA h g-1 can be obtained even at a high current density of 3.2 A g-1 when applied as an anode for lithium storage. This improved cycling stability and rate capability benefit from the carbon coating, which not only buffers the volume change of SnOx SNPs but also provides a path for electron transport on the surface of the SnOx SNPs during the electrochemical process. Furthermore, the oxygen vacancies in SnOx SNPs result in a large capacitive contribution to capacity. The EUV radiation method used to synthesize SnOx@C-graphite nanosheets is universally applicable to prepare a high-performance SNPs/carbon-based anode for lithium-ion batteries.

Sonochemistry-enabled uniform coupling of SnO2 nanocrystals with graphene sheets as anode materials for lithium-ion batteries

SnO₂/graphene nanocomposite was successfully synthesized by a facile sonochemical method from SnCl₂ and graphene oxide (GO) precursors. In the sonochemical process, the Sn²⁺ is firstly dispersed homogeneously on the GO surface, then in situ oxidized to SnO₂ nanoparticles on both sides of the graphene nanosheets (RGO) obtained by the reduction of GO under continuous ultrasonication. Graphene not only provides a mechanical support to alleviate the volume changes of the SnO₂ anode and prevent nanoparticle agglomeration, but also serves as a conductive network to facilitate charge transfer and Li⁺ diffusion. When used as a lithium ion battery (LIB) anode, the SnO₂/graphene nanocomposite exhibits significantly improved specific capacity (1610 mA h g⁻¹ at 100 mA g⁻¹), good cycling stability (retaining 87% after 100 cycles), and competitive rate performance (273 mA h g⁻¹ at 500 mA g⁻¹) compared to those of bare SnO₂. This sonochemical method can be also applied to the synthesis of other metal-oxide/graphene composites and this work provides a large-scale preparation route for the practical application of SnO₂ in lithium ion batteries.

SnO₂/graphene nanocomposite was successfully synthesized by a facile sonochemical method from SnCl₂ and graphene oxide (GO) precursors.

A novel ternary heterostructure with dramatic SERS activity for evaluation of PD-L1 expression at the single-cell level

Surface-enhanced Raman scattering (SERS) probes based on a charge transfer (CT) process with high stability and reproducibility are powerful tools under open-air conditions. However, the key problem ahead of practical usage of CT-based SERS technology is how to effectively improve sensitivity. Here, a novel ternary heterostructure SERS substrate, Fe₃O₄@GO@TiO₂, with a significant enhancement factor of 8.08 × 10⁶ was first synthesized. We found the remarkable enhanced effect of SERS signal to be attributed to the resonance effect of CuPc, CT between GO and TiO₂, and enrichment from a porous TiO₂ shell. In addition, we developed a robust SERS probe with good recyclability under visible light illumination on Fe₃O₄@GO@TiO₂ nanocomposites toward ultrasensitive detection of cancer cells down to three cells. We have now successfully applied this probe for in situ quantification and imaging of programmed cell death receptor ligand 1 (PD-L1) on triple-negative breast cancer cell surface at the single-cell level and for monitoring the expression variation of PD-L1 during drug treatment.

Hollow SnO2 nanospheres with oxygen vacancies entrapped by a N-doped graphene network as robust anode materials for lithium-ion batteries

The practical application of tin dioxide (SnO2) in lithium-ion batteries has been greatly hindered by its large volumetric expansion and low conductivity. Thus, a rational design of the size, geometry and the pore structure of SnO2-based nanomaterials is still a dire demand. To this end, herein we report an effective approach for engineering hollow-structured SnO2 nanospheres with adequate surface oxygen vacancies simultaneously wrapped by a nitrogen-doped graphene network (SnO2-x/N-rGO) through an electrostatic adsorption-induced self-assembly together with a thermal reduction process. The close electrostatic attraction achieved a tight and uniform combination of positively charged SnO2 nanospheres with negatively charged graphene oxide (GO), which can alleviate the aggregation and volume expansion of the entrapped SnO2 nanospheres. Subsequent thermal treatment not only ensures a significant reduction of the GO sheets accompanying nitrogen-doping, but also induces the generation of oxygen vacancies on the surface of the SnO2 hollow nanospheres, together building up a long-range and bicontinuous transfer channel for rapid electron and ion transport. Because of these structural merits, the as-built SnO2-x/N-rGO composite used as the anode material exhibits excellent robust cycling stability (∼912 mA h g-1 after 500 cycles at 0.5 A g-1 and 652 mA h g-1 after 200 cycles at 1 A g-1) and superior rate capability (309 mA h g-1 at 10 A g-1). This facile fabrication strategy may pave the way for the construction of high performance SnO2-based anode materials for potential application in advanced lithium-ion batteries.

Unique interconnected graphene/SnO2 nanoparticle spherical multilayers for lithium-ion battery applications

We have designed and synthesized a unique structured graphene/SnO₂ composite, where SnO₂ nanoparticles are inserted in between interconnected graphene sheets which form hollow spherical multilayers. The hollow spherical multilayered structure provides much flexibility to accommodate the configuration and volume changes of SnO₂ in the material. When it is used as an anode material for lithium-ion batteries, such a novel nanostructure can not only provide a stable conductive matrix and suppress the mechanical stress, but also eliminate the need of any binders for constructing electrodes. Electrochemical tests show that the unique graphene/SnO₂ composite electrode as designed could exhibit a large reversible capacity over 1000 mA h g^-1 and long cycling life with 88% retention after 100 cycles. These results indicate the great potential of the composite for being used as a high performance anode material for lithium-ion batteries.

N-Doped hollow carbon nanosheet supported SnO2 nanoparticles

The novel structure of hollow carbon nanosheets could buffer large strains and prolong the cycle life effectively.

Applying Nanoscale Kirkendall Diffusion for Template-Free, Kilogram-Scale Production of SnO2 Hollow Nanospheres via Spray Drying System

A commercially applicable and simple process for the preparation of aggregation-free metal oxide hollow nanospheres is developed by applying nanoscale Kirkendall diffusion to a large-scale spray drying process. The precursor powders prepared by spray drying are transformed into homogeneous metal oxide hollow nanospheres through a simple post-treatment process. Aggregation-free SnO2 hollow nanospheres are selected as the first target material for lithium ion storage applications. Amorphous carbon microspheres with uniformly dispersed Sn metal nanopowder are prepared in the first step of the post-treatment process under a reducing atmosphere. The post-treatment of the Sn-C composite powder at 500 °C under an air atmosphere produces carbon- and aggregation-free SnO2 hollow nanospheres through nanoscale Kirkendall diffusion. The hollow and filled SnO2 nanopowders exhibit different cycling performances, with their discharge capacities after 300 cycles being 643 and 280 mA h g(-1), respectively, at a current density of 2 A g(-1). The SnO2 hollow nanospheres with high structural stability exhibit superior cycling and rate performances for lithium ion storage compared to the filled ones.

Irradiated Graphene Loaded with SnO₂ Quantum Dots for Energy Storage

Tin dioxide (SnO2) and graphene are unique strategic functional materials with widespread technological applications, particularly in the areas of solar batteries, optoelectronic devices, and solid-state gas sensors owing to advances in optical and electronic properties. Versatile strategies for microstructural evolution and related performance of SnO2 and graphene composites are of fundamental importance in the development of electrode materials. Here we report that a novel composite, SnO2 quantum dots (QDs) supported by graphene nanosheets (GNSs), has been prepared successfully by a simple hydrothermal method and electron-beam irradiation (EBI) strategies. Microstructure analysis indicates that the EBI technique can induce the exfoliation of GNSs and increase their interlayer spacing, resulting in the increase of GNS amorphization, disorder, and defects and the removal of partial oxygen-containing functional groups on the surface of GNSs. The investigation of SnO2 nanoparticles supported by GNSs (SnO2/GNSs) reveals that the GNSs are loaded with SnO2 QDs, which are dispersed uniformly on both sides of GNSs. Interestingly, the electrochemical performance of SnO2/GNSs indicates that SnO2 QDs supported by a 210 kGy irradiated GNS shows excellent cycle response, high specific capacity, and high reversible capacity. This novel SnO2/GNS composite has potential practical applications in SnO2 electrode materials during Li(+) insertion/extraction.

Incorporation of PEDOT:PSS into SnO2/reduced graphene oxide nanocomposite anodes for lithium-ion batteries to achieve ultra-high capacity and cyclic stability

A conducting polymer matrix of PEDOT:PSS is incorporated into SnO₂/reduced graphene oxide composite for increasing the stability of lithium-ion battery anodes.

Retracted Article: Graphene–SnO2 nanocomposites decorated with quantum tunneling junctions: preparation strategies, microstructures and formation mechanism

A facile, simple and efficient ultrasonic-assisted hydrothermal synthesis approach has been developed to prepare graphene–SnO₂ nanocomposites.

Conformal graphene encapsulation of tin oxide nanoparticle aggregates for improved performance in reversible Li+ storage

The performance of SnO2 nanoparticle (NP) aggregates for reversible storage of Li(+) was improved after conformal encapsulation of individual aggregates with graphene (i.e., encapsulation without changing the underlying morphology of SnO2 aggregates). Conformal encapsulation was carried out by modifying the surface of SnO2 NP aggregates with amine terminating groups to increase their binding affinity to graphene. The thickness of the graphene encapsulation could then be varied by the amount of graphene oxide (GO) solution used in the preparation. Electron microscopy confirmed the successful coating of graphene as a thin layer on the NP aggregate surface. This unique construction method resulted in SnO2-graphene composites with a satisfying cycling performance. In particular a composite with only 5 wt% graphene could deliver, without the use of any carbon conductive additive, a charge (Li(+) extraction) capacity of 700 mA h g(-1) at the regular current density of 0.1 A g(-1) and 423 mA h g(-1) after a tenfold increase of the current density to 1 A g(-1) in the 0.005-2 V voltage window. There was evidence to suggest that the composite performance was determined by Li(+) diffusion across the basal plane of the graphene layers.

Graphene-based materials: fabrication, characterization and application for the decontamination of wastewater and wastegas and hydrogen storage/generation

Graphene, as an ideal two-dimensional material and single-atom layer of graphite, has attracted exploding interests in multidisciplinary research because of its unique structure and exceptional physicochemical properties. Especially, graphene-based materials offer a wide range of potentialities for environmental remediation and energy applications. This review shows an extensive overview of the main principles and the recent synthetic technologies about designing and fabricating various innovative graphene-based materials. Furthermore, an extensive list of graphene-based sorbents and catalysts from vast literature has been compiled. The adsorptive and catalytic properties of graphene-based materials for the removal of various pollutants and hydrogen storage/production as available in the literature are presented. Tremendous adsorption capacity, excellent catalytic performance and abundant availability are the significant factors making these materials suitable alternatives for environmental pollutant control and energy-related system, especially in terms of the removal of pollutants in water, gas cleanup and purification, and hydrogen generation and storage. Meanwhile, a brief discussion is also included on the influence of graphene materials on the environment, and its toxicological effects. Lastly, some unsolved subjects together with major challenges in this germinating area of research are highlighted and discussed. Conclusively, the expanding of graphene-based materials in the field of adsorption and catalysis science represents a viable and powerful tool, resulting in the superior improvement of environmental pollution control and energy development.

Gas-phase self-assembly of highly ordered titania@graphene nanoflakes for enhancement in photocatalytic activity

The gas-phase self-assembly of reduced graphene oxide (rGO) nanoflakes with highly ordered ultrafine titania (TiO2) particles was performed and the resultant hybrid material displayed an enhanced photocatalytic performance, both in producing hydrogen and in degrading dyes. Freshly synthesized TiO2 nanoparticles (∼35 nm in equivalent mobility diameter) were quantitatively incorporated with nanoscale rGO (∼36 nm in equivalent mobility diameter) in the form of TiO2/rGO hybrid nanoflakes (∼31 nm in equivalent mobility diameter). The TiO2/rGO hybrid flakes were finally employed to evaluate its photocatalytic activity, and it was found that the ability to achieve hydrogen production and dye degradation was greater than that of a hybridized material from commercial p25-TiO2 and large rGO. This gas-phase self-assembly also enhanced the photocatalytic activity by applying different spark configurations to prepare ZnO, Au, or Ag particles incorporated with rGO nanoflakes.

Rutile-type (Ti,Sn)O₂ nanorods as efficient anode materials toward its lithium storage capabilities

A series of rutile-type (Ti,Sn)O2 solid solutions with nanorod architecture were successfully synthesized in this study by varying their calcination temperatures of tin-modified titanium dioxide (Sn/TiO2) nanocomposites under a nitrogen atmosphere. During the delithiation process, the (Ti,Sn)O2 nanorods obtained at 500 °C delivered a specific capacity of about 300 mA h g(-1) and showed minimal capacity fading even at a high current density of 3 A g(-1).

Graphene-based electrodes

Graphene, the thinnest two dimensional carbon material, has become the subject of intensive investigation in various research fields because of its remarkable electronic, mechanical, optical and thermal properties. Graphene-based electrodes, fabricated from mechanically cleaved graphene, chemical vapor deposition (CVD) grown graphene, or massively produced graphene derivatives from bulk graphite, have been applied in a broad range of applications, such as in light emitting diodes, touch screens, field-effect transistors, solar cells, supercapacitors, batteries, and sensors. In this Review, after a short introduction to the properties and synthetic methods of graphene and its derivatives, we will discuss the importance of graphene-based electrodes, their fabrication techniques, and application areas.

Generalized syntheses of nanocrystal-graphene hybrids in high-boiling-point organic solvents

Nanocrystal-graphene have been proposed as a new kind of promising hybrid for a wide range of application areas including catalysts, electronics, sensors, biomedicine, and energy storage, etc. Although a variety of methods have been developed for the preparation of hybrids, a facile and general synthetic approach is still highly required. In this study, nanocrystal-graphene hybrids were successfully synthesized in high-boiling-point organic solvents. Graphene oxide (GO) nanosheets were modified by oleylamine (OLA) to form a OLA-GO complex in order to be readily incorporated into hydrophobic synthesis. A rich library of highly crystalline nanocrystals, with types including noble metal, metal oxide, magnetic material and semiconductor were successfully grown on chemically converted graphene (CCG), which is simultaneously reduced from GO during the synthesis. High boiling-point solvents afford sufficient thermal energy to assure the high-quality crystalline nature of NCs, therefore the post-annealing process is obviated. Controlled experiments revealed that OLA-GO triggers heterogeneous nucleation and serves as excellent nuclei anchorage media. The protocol developed here brings one step closer to achieve "unity in diversity" on the preparation of nanocrystal-graphene hybrids.

Graphene-supported SnO2 nanoparticles prepared by a solvothermal approach for an enhanced electrochemical performance in lithium-ion batteries

SnO2 nanoparticles were dispersed on graphene nanosheets through a solvothermal approach using ethylene glycol as the solvent. The uniform distribution of SnO2 nanoparticles on graphene nanosheets has been confirmed by scanning electron microscopy and transmission electron microscopy. The particle size of SnO2 was determined to be around 5 nm. The as-synthesized SnO2/graphene nanocomposite exhibited an enhanced electrochemical performance in lithium-ion batteries, compared with bare graphene nanosheets and bare SnO2 nanoparticles. The SnO2/graphene nanocomposite electrode delivered a reversible lithium storage capacity of 830 mAh g-1 and a stable cyclability up to 100 cycles. The excellent electrochemical properties of this graphene-supported nanocomposite could be attributed to the insertion of nanoparticles between graphene nanolayers and the optimized nanoparticles distribution on graphene nanosheets.

Li ion battery materials with core-shell nanostructures

Nanomaterials have some disadvantages in application as Li ion battery materials, such as low density, poor electronic conductivity and high risk of surface side reactions. In recent years, materials with core-shell nanostructures, which was initially a common concept in semiconductors, have been introduced to the field of Li ion batteries in order to overcome the disadvantages of nanomaterials, and increase their general performances in Li ion batteries. Many efforts have been made to exploit core-shell Li ion battery materials, including cathode materials, such as lithium transition metal oxides with varied core and shell compositions, and lithium transition metal phosphates with carbon shells; and anode materials, such as metals, alloys, Si and transition metal oxides with carbon shells. More recently, graphene has also been proposed as a shell material. All these core-shell nanostructured materials presented enhanced electrochemical capacity and cyclic stability. In this review, we summarize the preparation, electrochemical performances, and structural stability of core-shell nanostructured materials for lithium ion batteries, and we also discuss the problems and prospects of this kind of materials.