Biosurfactants: Secondary Metabolites Involved in the Process of Bioremediation and Biofilm Removal

The search for environmentally friendly methods to remove persistent substances such as organic pollutants and sessile communities such as biofilms that severely affect the environment and human health resulted in biosurfactant discovery. Owing to their low level of toxicity and high biodegradability, biosurfactants are increasingly preferred to be used for removal of pollutants from nature. These amphipathic molecules can be synthesized inexpensively, employing cheap substrates such as agricultural and industrial wastes. Recent progress has been made in identifying various biosurfactants that can be used to remove organic pollutants and harmful microbial aggregates, as well as novel microbial strains that produce these surface-active molecules to survive in a hydrocarbon-rich environment. This review focuses on the identification and understanding the role of biosurfactants and the microorganisms involved in the removal of biofilms and remediation of xenobiotics and various types of hydrocarbons such as crude oil, aromatic hydrocarbons, n-alkanes, aliphatic hydrocarbons, asphaltenes, naphthenes, and other petroleum products. This property of biosurfactant is very important as biofilms are of great concern due to their impact on the environment, public health, and industries worldwide. This work also includes several advanced molecular methods that can be used to enhance the production of biosurfactants by the microorganisms studied.

Enrichment and Isolation of Surfactin-degrading Bacteria

A total of 100 environmental samples were investigated for their ability to degrade 1 g/L surfactin as a substrate. Among them, two enrichment cultures, which exhibited microbial growth as well as surfactin degradation, were selected and further investigated. After several successive cultivations, nanopore sequencing of full-length 16S rRNA genes with MinION^TM was used to analyze the bacterial species in the enrichment cultures. Variovorax spp., Caulobacter spp., Sphingopyxis spp., and Pseudomonas spp. were found to be dominant in these surfactin-degrading mixed cultures. Finally, one strain of Pseudomonas putida was isolated as a surfactin-degrading bacterium. This strain degraded 1 g/L surfactin below a detectable level within 14 days, and C₁₃ surfactin was degraded faster than C₁₅ surfactin.

Self-Assembly of Surfactin into Nanofibers with Hydrophilic Channels in Nonpolar Organic Media

We investigated the self-assembly of surfactin (SFNa), a cyclic peptide amphiphile produced by Bacillus subtilis, in a nonpolar organic solvent, namely, cyclohexane (CHx). The CHx solution of SFNa formed a thermoreversible organogel. Transmission electron microscopy and small-angle X-ray scattering (SAXS) analyses showed that gelation of the CHx solution of SFNa was caused by physical cross-linking of SFNa nanofibers. Wide-angle X-ray diffraction and Fourier-transform infrared analyses showed that the SFNa nanofibers were formed by one-dimensional stacking of SFNa rings with a period of 0.48 nm corresponding to the length of inter-ring hydrogen bonds between amide groups. A combination of SAXS and small-angle neutron scattering investigations of CHx and deuterated CHx solutions of SFNa nanofibers containing H₂O or D₂O showed that the SFNa nanofibers had a hydrophilic interior and formed water channels by water incorporation in this region.

Biosurfactants, natural alternatives to synthetic surfactants: Physicochemical properties and applications

Biosurfactants comprise a wide array of amphiphilic molecules synthesized by plants, animals, and microbes. The synthesis route dictates their molecular characteristics, leading to broad structural diversity and ensuing functional properties. We focus here on low molecular weight (LMW) and high molecular weight (HMW) biosurfactants of microbial origin. These are environmentally safe and biodegradable, making them attractive candidates for applications spanning cosmetics to oil recovery. Biosurfactants spontaneously adsorb at various interfaces and self-assemble in aqueous solution, resulting in useful physicochemical properties such as decreased surface and interfacial tension, low critical micellization concentrations (CMCs), and ability to solubilize hydrophobic compounds. This review highlights the relationships between biosurfactant molecular composition, structure, and their interfacial behavior. It also describes how environmental factors such as temperature, pH, and ionic strength can impact physicochemical properties and self-assembly behavior of biosurfactant-containing solutions and dispersions. Comparison between biosurfactants and their synthetic counterparts are drawn to illustrate differences in their structure-property relationships and potential benefits. Knowledge of biosurfactant properties organized along these lines is useful for those seeking to formulate so-called green or natural products with novel and useful properties.

Evaluation of Yield and Surface Tension-lowering Activity of Iturin A Produced by Bacillus subtilis RB14

Bacillus subtilis RB14 produces the lipopeptide antibiotic iturin A by submerged and biofilm fermentation. In this study, we optimized the conditions for iturin A production in a jar fermentor. The maximum yield of iturin A was 932 mg L^-1 after 120 h. The surface tension of water decreased from 72.0 to 39.0 mN m^-1 as the concentrations of C₁₄ iturin A increased, indicating that C₁₄ iturin A behaves as a surfactant in water. The critical micellar concentration obtained from the intersection of two fitted lines was 1.2 × 10^-4 M. Moreover, the surface tension of water decreased as the length of the alkyl chain of iturin A increased.

Surface Activity and Ca2+-Dependent Aggregation Property of Lichenysin Produced by Bacillus licheniformis NBRC 104464

Bacillus licheniformis NBRC 104464 produces a cyclic lipopeptide different from surfactin. After we performed liquid chromatography fractionation and purification, we used structural analyses to identify the cyclic lipopeptide as lichenysin. Surface tension measurements of lichenysin sodium salt in water yielded a critical micelle concentration (CMC) of 1.0×10^-5 M. The surface tension at the CMC was 28.9 mN/m. Comparative analysis of Ca²⁺-influenced micellar aggregation of lichenysin and surfactin revealed that the formation rate of the lichenysin-Ca²⁺ complex aggregate remained low up to a [Ca²⁺]/[lichenysin] molar ratio of 80, whereas the surfactin-Ca²⁺ complex formed micellar aggregates at the same molar ratio. Further excessive addition of Ca²⁺ to the micellar solution of lichenysin induced higher turbidity than surfactin.

Discovery of nicoyamycin A, an inhibitor of uropathogenic Escherichia coli growth in low iron environments

High-throughput screening and activity-guided purification identified nicoyamycin A, a natural product comprised of an uncommon 3-methyl-1,4-dioxane ring incorporated into a desferrioxamine-like backbone via a spiroaminal linkage. Nicoyamycin A potently inhibits uropathogenic Escherichia coli growth in low iron medium, a promising step toward developing novel antibiotics to treat recalcitrant bacterial infections.

Screening of a Bacillus subtilis Strain Producing Multiple Types of Cyclic Lipopeptides and Evaluation of Their Surface-tension-lowering Activities

Sixty Bacillus subtilis strains were investigated for their ability to produce cyclic lipopeptides (CLPs). Among them, B. subtilis NBRC 109107 produced at least three types of CLPs by high-performance liquid chromatography (HPLC) analysis, and these CLPs were thought to be surfactin, iturin A, and fengycin by polymerase chain reaction amplification of respective CLP synthetase-encoding genes. However, after HPLC fractionation and purification, structural analysis of the CLPs revealed that these were surfactin homologues, iturin A, and unknown CLPs, whose surface-tension-lowering activities were 29.4, 56.7, and 48.6 mN/m, respectively. By contrast, fengycin was not detected.

pH-induced conformational change of natural cyclic lipopeptide surfactin and the effect on protease activity

The cyclic lipopeptide surfactin (SF) is one of the promising environmental friendly biosurfactants abundantly produced by microorganisms such as Bacillus subtilis. SF shows excellent surface properties at various pH, together with lower toxicity and higher biodegradability than commonly used petroleum-based surfactants. However, the effect of the dissociation degree of SF on self-assembly is still incompletely understood, even though two acidic amino acid residues (Asp and Glu) are known to influence eventual surface and biological functions. Here, we report changes in the secondary structure of SF induced by increased pH, and the effect on protease activity. We found that the β-sheet and β-turn formation of SF are significantly enhanced through increased dissociation of Asp and Glu as revealed by a titration experiment of SF solution to estimate apparent pK₁ and pK₂ values together with circular dichroism spectroscopy. We also studied the activity of the common detergent enzyme subtilisin in SF solution at above its pK₂ (pH 7.6) to understand the role of the dissociation degree in the interaction with the protein. The mixing of SF having a unique cyclic topological feature with subtilisin suppressed the decrease in protease activity observed in the presence of synthetic surfactants such as sodium dodecyl sulfate and polyoxyethylene alkyl ether. Thus, SF has great potential for use in laundry detergent formulations, to improve the stability and reliability of detergent enzymes.

Solvent Extraction: Structure of the Liquid-Liquid Interface Containing a Diamide Ligand

Knowledge of the (supra)molecular structure of an interface that contains amphiphilic ligand molecules is necessary for a full understanding of ion transfer during solvent extraction. Even if molecular dynamics already yield some insight in the molecular configurations in solution, hardly any experimental data giving access to distributions of both extractant molecules and ions at the liquid-liquid interface exist. Here, the combined application of X-ray and neutron reflectivity measurements represents a key milestone in the deduction of the interfacial structure and potential with respect to two different lipophilic ligands. Indeed, we show for the first time that hard trivalent cations can be repelled or attracted by the extractant-enriched interface according to the nature of the ligand.

Synthesis, self-assembly, and catalytic activity of histidine-based structured lipopeptides for hydrolysis reactions in water

When interfacial catalysis and organocatalysis meet: self-assembling histidine-based lipopeptides catalyse ester hydrolysis in water, depending on aggregation.

Impact of a stereocentre inversion in cyclic lipodepsipeptides from the viscosin group: a comparative study of the viscosinamide and pseudodesmin conformation and self-assembly

The viscosin group covers a series of cyclic lipodepsipeptides (CLPs) produced by Pseudomonas bacteria, with a range of biological functions and antimicrobial activities. Their oligopeptide moieties are composed of both L- and D-amino acids. Remarkably, the Leu5 amino acid-centrally located in the nonapeptide sequence-is the sole residue found to possess either an L or D configuration, depending on the producing strain. The impact of this D/L switch on the solution conformation was investigated by NMR-restrained molecular modelling of the epimers pseudodesmin A and viscosinamide A. Although the backbone fold remained unaffected, the D/L switch adjusted the segregation between hydrophobic and hydrophilic residues, and thus the amphipathicity. It also influenced the self-assembly capacity in organic solvents. Additionally, several new minor variants of viscosinamide A from Pseudomonas fluorescens DR54 were identified, and an NMR assay is proposed to assess the presence of either an L- or D-Leu5.

Surfactin production enhances the level of cardiolipin in the cytoplasmic membrane of Bacillus subtilis

Surfactin is a cyclic lipopeptide antibiotic that disturbs the integrity of the cytoplasmic membrane. In this study, the role of membrane lipids in the adaptation and possible surfactin tolerance of the surfactin producer Bacillus subtilis ATCC 21332 was investigated. During a 1-day cultivation, the phospholipids of the cell membrane were analyzed at the selected time points, which covered both the early and late stationary phases of growth, when surfactin concentration in the medium gradually rose from 2 to 84μmol·l(-1). During this time period, the phospholipid composition of the surfactin producer's membrane (Sf(+)) was compared to that of its non-producing mutant (Sf(-)). Substantial modifications of the polar head group region in response to the presence of surfactin were found, while the fatty acid content remained unaffected. Simultaneously with surfactin production, a progressive accumulation up to 22% of the stress phospholipid cardiolipin was determined in the Sf(+) membrane, whereas the proportion of phosphatidylethanolamine remained constant. At 24h, cardiolipin was found to be the second major phospholipid of the membrane. In parallel, the Laurdan generalized polarization reported an increasing rigidity of the lipid bilayer. We concluded that an enhanced level of cardiolipin is responsible for the membrane rigidification that hinders the fluidizing effect of surfactin. At the same time cardiolipin, due to its negative charge, may also prevent the surfactin-membrane interaction or surfactin pore formation activity.