X-ray Photoelectron Spectroscopy of Pyridinium-Based Ionic Liquids: Comparison to Imidazolium- and Pyrrolidinium-Based Analogues

Tailoring refractive index dispersion in ionic liquids: The influence of charge delocalization in cations

In this work, we study the contributions that different molecular blocks have in the wavelength-dependence of the refractive index in ionic liquids. The ionic liquids chosen for this work are combinations of the bis(trifluoromethylsulfonyl)imide anion with cations based on four different heterocycles with different extents of charge delocalization. The analysis is performed in terms of the experimental electronic polarizability, which is obtained by combining measurements of refractive index curves and densities via the Lorentz-Lorenz equation. Exploiting the additivity of electronic polarizability in ionic liquids, the contribution of the anion and the heterocycles of the cations is separated from that of the alkyl chains. Our results show important differences in these contributions, revealing a key influence of the charge delocalization in the cationic rings on the behavior of the refractive index dispersion. The understanding of how different parts of ionic liquids affect their refractive index dependence on wavelength would allow to gain precise control of this magnitude, enabling the development of customized optical materials for diverse applications in photonics and sensing technologies.

Dual-Hydrogen Bond Donor-Functionalized Carbon Nanotube Fibers: Enhancing Anion-Sensing Performance Through Functionalization Approaches

In this study, chemiresistive anion sensors are developed using carbon nanotube fibers (CNTFs) functionalized with squaramide-based dual-hydrogen bond donors (SQ1 and SQ2) and systematically compared the sensing properties attained by two different functionalization methods. Model structures of the selectors are synthesized based on a squaramide motif incorporating an electron-withdrawing group. Anion-binding studies of SQ1 and SQ2 are conducted using UV-vis titrations to elucidate the anion-binding properties of the selectors. These studies revealed that the chemical interaction with acetate (AcO-) induced the deprotonation of both SQ1 and SQ2. Selectors are functionalized onto the CNTFs using either covalent or non-covalent functionalization. For covalent functionalization, SQ1 is chemically formed on the surface of the CNTFs, whereas SQ2 is non-covalently functionalized to the surface of the CNTFs assisted by poly(4-vinylpyridine). The results showed that non-covalently functionalized CNTFs exhibited a 3.6-fold higher sensor response toward 33.33 mm AcO- than covalently functionalized CNTFs. The selector library is expanded using diverse selectors, such as TU- and CA-based selectors, which are non-covalently functionalized on CNTFs and presented selective AcO--sensing properties. To demonstrate on-site and real-time anion detection, anion sensors are integrated into a sensor module that transferred the sensor resistance to a smartphone via wireless communication.

A Fe-NC electrocatalyst boosted by trace bromide ions with high performance in proton exchange membrane fuel cells

Replacement of expensive and rare platinum with metal-nitrogen-carbon catalysts for oxygen reduction reactions in proton exchange membrane fuel cells is hindered by their inferior activity. Herein, we report a highly active iron-nitrogen-carbon catalyst by optimizing the carbon structure and coordination environments of Fe-N4 sites. A critical high-temperature treatment with ammonium chloride and ammonium bromide not only enhances the intrinsic activity and density of Fe-N4 sites, but also introduces numerous defects, trace Br ions and creates mesopores in the carbon framework. Notably, surface Br ions significantly improve the interaction between the ionomer and catalyst particles, promoting ionomer infiltration and optimizing the O2 transport and charge transfer at triple-phase boundary. This catalyst delivers a high peak power density of 1.86 W cm-2 and 54 mA cm-2 at 0.9 ViR-free in a H2-O2 fuel cells at 80 °C. Our findings highlight the critical role of interface microenvironment regulation.

Monitoring the Behavior of Na Ions and Solid Electrolyte Interphase Formation at an Aluminum/Ionic Liquid Electrode/Electrolyte Interface via Operando Electrochemical X-ray Photoelectron Spectroscopy

In electrochemical energy storage devices, the interface between the electrode and the electrolyte plays a crucial role. A solid electrolyte interphase (SEI) is formed on the electrode surface due to spontaneous decomposition of the electrolyte, which in turn controls the dynamics of ion migration during charge and discharge cycles. However, the dynamic nature of the SEI means that its chemical structure evolves over time and as a function of the applied bias; thus, a true operando study is extremely valuable. X-ray photoelectron spectroscopy (XPS) is a widely used technique to understand the surface electronic and chemical properties, but the use of ultrahigh vacuum in standard instruments is a major hurdle for their utilization in measuring wet electrochemical processes. Herein, we introduce a 3-electrode electrochemical cell to probe the behavior of Na ions and the formation of SEI at the interface of an ionic liquid (IL) electrolyte and an aluminum electrode under operando conditions. A system containing 0.5 molar NaTFSI dissolved in the IL [BMIM][TFSI] was investigated using an Al working electrode and Pt counter and reference electrodes. By optimizing the scan rate of both XPS and cyclic voltammetry (CV) techniques, we captured the formation and evolution of SEI chemistry using real-time spectra acquisition techniques. A CV scan rate of 2 mVs-1 was coupled with XPS snapshot spectra collected at 10 s per core level. The technique demonstrated here provides a platform for the chemical analysis of materials beyond batteries.

Anion-Dependent Strength Scale of Interactions in Ionic Liquids from X-ray Photoelectron Spectroscopy, Ab Initio Molecular Dynamics, and Density Functional Theory

Using a combination of experiments and calculations, we have gained new insights into the nature of anion-cation interactions in ionic liquids (ILs). An X-ray photoelectron spectroscopy (XPS)-derived anion-dependent electrostatic interaction strength scale, determined using XPS core-level binding energies for IL cations, is presented here for 39 different anions, with at least 18 new anions included. Linear correlations of experimental XPS core-level binding energies for IL cations with (a) calculated core binding energies (ab initio molecular dynamics (AIMD) simulations were used to generate high-quality model IL structures followed by single-point density functional theory (DFT) to obtain calculated core binding energies), (b) experimental XPS core-level binding energies for IL anions, and (c) other anion-dependent interaction strength scales led to three main conclusions. First, the effect of different anions on the cation can be related to ground-state interactions. Second, the variations of anion-dependent interactions with the identity of the anion are best rationalized in terms of electrostatic interactions and not occupied valence state/unoccupied valence state interactions or polarizability-driven interactions. Therefore, the XPS-derived anion-dependent interaction strength scale can be explained using a simple electrostatic model based on electrostatic site potentials. Third, anion-probe interactions, irrespective of the identity of the probe, are primarily electrostatic, meaning that our electrostatic interaction strength scale captures some inherent, intrinsic property of anions independent of the probe used to measure the interaction strength scale.

A colorimetric immunoassay for the detection of human vascular endothelial growth factor 165 (VEGF165) based on anti-VEGF-iron oxide nanoparticle conjugation

Vascular endothelial growth factor (VEGF) is an indispensable element in many physiological processes, while alterations in its level in the circulating system are signs of pathology-associated diseases. Therefore, its precise and selective detection is critical for clinical applications to monitor the progression of the pathology. In this study, an optical immunoassay biosensor was developed as a model study for detecting recombinant VEGF165. The VEGF165 sample was purified from recombinant Kluyveromyces lactis GG799 yeast cells. Indirect ELISA was used during the detection, wherein iron oxide nanoparticles (FeNPs) were utilized to obtain optical signals. The FeNPs were synthesized in the presence of lactose p-amino benzoic acid (LpAB). VEGF165 antibody was conjugated to the LpAB-FeNPs through EDC/NHS chemistry to convert the iron oxide nanoparticles into VEGF165 specific probes. The specificity of the prepared system was tested in the presence of potential serum-based interferents (i.e., glucose, urea, insulin, C-reactive protein, and serum amyloid A), and validation studies were performed in a simulated serum sample. The proposed immunoassay showed a wide detection range (0.5 to 100 ng/mL) with a detection limit of 0.29 ng/mL. These results show that the developed assay could offer a sensitive, simple, specific, reliable, and high-throughput detection platform that can be used in the clinical diagnostics of VEGF.

Smart Electrode Surfaces by Electrolyte Immobilization for Electrocatalytic CO2 Conversion

The activity and selectivity of molecular catalysts for the electrochemical CO2 reduction reaction (CO2RR) are influenced by the induced electric field at the electrode/electrolyte interface. We present here a novel electrolyte immobilization method to control the electric field at this interface by positively charging the electrode surface with an imidazolium cation organic layer, which significantly favors CO2 conversion to formate, suppresses hydrogen evolution reaction, and diminishes the operating cell voltage. Those results are well supported by our previous DFT calculations studying the mechanistic role of imidazolium cations in solution for CO2 reduction to formate catalyzed by a model molecular catalyst. This smart electrode surface concept based on covalent grafting of imidazolium on a carbon electrode is successfully scaled up for operating at industrially relevant conditions (100 mA cm-2) on an imidazolium-modified carbon-based gas diffusion electrode using a flow cell configuration, where the CO2 conversion to formate process takes place in acidic aqueous solution to avoid carbonate formation and is catalyzed by a model molecular Rh complex in solution. The formate production rate reaches a maximum of 4.6 gHCOO- m-2 min-1 after accumulating a total of 9000 C of charge circulated on the same electrode. Constant formate production and no significant microscopic changes on the imidazolium-modified cathode in consecutive long-term CO2 electrolysis confirmed the high stability of the imidazolium organic layer under operating conditions for CO2RR.

Flexible Organic Photodetectors with Mechanically Robust Zinc Oxide Nanoparticle Thin Films

Zinc oxide nanoparticle (ZnO-NP) thin films have been intensively used as electron transport layers (ETLs) in organic optoelectronic devices, but their moderate mechanical flexibility hinders their application to flexible electronic devices. This study reveals that the multivalent interaction between ZnO-NPs and multicharged conjugated electrolytes, such as diphenylfluorene pyridinium bromide derivative (DFPBr-6), can significantly improve the mechanical flexibility of ZnO-NP thin films. Intermixing ZnO-NPs and DFPBr-6 facilitates the coordination between bromide anions (from the DFPBr-6) and zinc cations on ZnO-NP surfaces, forming Zn²⁺-Br^- bonds. Different from a conventional electrolyte (e.g., KBr), DFPBr-6 with six pyridinium ionic side chains holds the Br^--chelated ZnO-NPs adjacent to DFP⁺ through Zn²⁺-Br^--N⁺ bonds. Consequently, ZnO-NP:DFPBr-6 thin films exhibit improved mechanical flexibility with a critical bending radius as low as 1.5 mm under tensile bending conditions. Flexible organic photodetectors with ZnO-NP:DFPBr-6 thin films as ETLs demonstrate reliable device performances with high R (0.34 A/W) and D* (3.03 × 10¹² Jones) even after 1000 times repetitive bending at a bending radius of 4.0 mm, whereas devices with ZnO-NP and ZnO-NP:KBr ETLs yield >85% reduction in R and D* under the same bending condition.

Understanding X-ray Photoelectron Spectra of Ionic Liquids: Experiments and Simulations of 1-Butyl-3-methylimidazolium Thiocyanate

We demonstrate a combined experimental and computational approach to probe the electronic structure and atomic environment of an ionic liquid, based on core level binding energies. The 1-butyl-3-methylimidazolium thiocyanate [C₄C₁Im][SCN] ionic liquid was studied using ab initio molecular dynamics, and results were compared against previously published and new experimental X-ray photoelectron spectroscopy (XPS) data. The long-held assumption that initial-state effects in XPS dominate the measured binding energies is proven correct, which validates the established premise that the ground state electronic structure of the ionic liquid can be inferred directly from XPS measurements. A regression model based upon site electrostatic potentials and intramolecular bond lengths is shown to account accurately for variations in core-level binding energies within the ionic liquid, demonstrating the important effect of long-range interactions on the core levels and throwing into question the validity of traditional single ion pair ionic liquid calculations for interpreting XPS data.

Tetrahalidometallate(II) Ionic Liquids with More than One Metal: The Effect of Bromide versus Chloride

Fifteen N-butylpyridinium salts - five monometallic [C4 Py]2 [MBr4 ] and ten bimetallic [C4 Py]2 [M0.5 a M0.5 b Br4 ] (M=Co, Cu, Mn, Ni, Zn) - were synthesized, and their structures and thermal and electrochemical properties were studied. All the compounds are ionic liquids (ILs) with melting points between 64 and 101 °C. Powder and single-crystal X-ray diffraction show that all ILs are isostructural. The electrochemical stability windows of the ILs are between 2 and 3 V. The conductivities at room temperature are between 10-5 and 10-6  S cm-1 . At elevated temperatures, the conductivities reach up to 10-4  S cm-1 at 70 °C. The structures and properties of the current bromide-based ILs were also compared with those of previous examples using chloride ligands, which illustrated differences and similarities between the two groups of ILs.

Identification of the active triple-phase boundary of a non-Pt catalyst layer in fuel cells

The rational design of non-Pt oxygen reduction reaction (ORR) catalysts and catalyst layers in fuel cells is largely impeded by insufficient knowledge of triple-phase boundaries (TPBs) in the micropore and mesopore ranges. Here, we developed a size-sensitive molecular probe method to resolve the TPB of Fe/N/C catalyst layers in these size ranges. More than 70% of the ORR activity was found to be contributed by the 0.8- to 2.0-nanometer micropores of Fe/N/C catalysts, even at a low micropore area fraction of 29%. Acid-alkaline interactions at the catalyst-polyelectrolyte interface deactivate the active sites in mesopores and macropores, resulting in inactive TPBs, leaving micropores without the interaction as the active TPBs. The concept of active and inactive TPBs provides a previously unidentified design principle for non-Pt catalyst and catalyst layers in fuel cells.

An X-ray photoelectron spectroscopy study of ionic liquids based on a bridged dicationic moiety

A series of imidazolium and pyridinium-based bridged dicationic ionic liquids have been analysed using X-ray photoelectron spectroscopy. The different electronic environments of the dications have been investigated and a robust fitting model for the carbon C1s region has also been developed. The relative positions of different C1s components and N1s of dications have been determined and their complex C1s photoemission spectra produced from both aromatic and aliphatic carbon states giving photoemission peaks in the binding energy range of 289.0–283.9 eV. A contemporary fitting approach has been applied to a different set of environments which allowing comparison of the binding energies of cationic components of imidazolium and pyridinium-based dicationic ionic liquids. The experimental stoichiometry of all the carbons and nitrogens have also been calculated from XP spectra of the dicationic ionic liquids.

Poly(vinylbenzyl Pyridinium Salts) as Novel Sorbents for Hazardous Metals Ions Removal

Novel efficient complexing resins—poly(vinylbenzyl pyridinium salts) fabricated through poly(vinylbenzyl halogene-co-divinylbenzene) quaternization of N-decyloxy-1-(pyridin-3-yl)ethaneimine and N-decyloxy-1-(pyridin-4-yl)ethaneimine—were tested as adsorbents of Pb(II), Cd(II), Cu(II), Zn(II), and Ni(II) from aqueous solutions. The structure of these materials was established by 13C CP-MAS NMR, X-ray photoelectron spectroscopy, elemental analysis, and Fourier transform infrared spectroscopy, as well as thermogravimetric and differential thermal analyses. The textural properties were determined using scanning electron microscopy and low-temperature N2 sorption. Based on the conducted sorption studies, it was shown that the uptake behavior of the metal ions towards novel resins depended on the type of functionalities, contact time, pH, metal concentrations, and the resin dosage. The Langmuir model was investigated to be the best one for fitting isothermal adsorption equilibrium data, and the corresponding adsorption capacities were predicted to be 296.4, 201.8, 83.8, 38.1, and 39.3 mg/g for Pb(II), Zn(II), Cd(II), Cu(II), and Ni(II), respectively. These results confirmed that owing to the presence of the functional pyridinium groups, the resins demonstrated proficient metal ion removal capacities. Furthermore, VBBr-D4EI could be successfully used for the selective uptake of Pb(II) from wastewater. It was also shown that the novel resins can be regenerated without significant loss of their sorption capacity.

Novel Mesoporous Organosilicas with Task Ionic Liquids: Properties and High Adsorption Performance for Pb(II)

Removal of toxic contaminants such as Pb(II) from waste solutions is environmentally requested. Therefore, in this paper, for potential novel sorbents, mesoporous ionic liquid-functionalized silicas were synthesized and tested for the removal of Pb(II) from aqueous solutions. The successful synthesis of the adsorbents was proved by nuclear magnetic resonance (²⁹Si and ¹³C NMR), Fourier transform infrared spectroscopy (FTIR), and elemental analysis. The structural and textural properties were determined using scanning electron microscopy (SEM), X-ray diffraction (XRD), high-resolution transmission electron microscopy (TEM), and low-temperature N₂ sorption, and the result showed that the applied procedure made it possible to obtain highly ordered particles with a two-dimensional mesostructure. The effects of several parameters including initial pH, contact time, adsorption temperature, and Pb(II) concentration were studied in detail and were discussed to evaluate the adsorption properties of the fabricated materials towards Pb(II). The obtained results confirmed a very high potential of the sorbents; however, the adsorption properties depend on the structure and amounts of the functional group onto fabricated materials. The sample ILS-Ox3-40 showed fast kinetics (equilibrium reached within 10 min) and capacity of 172 mg/g, and that makes it a promising sorbent for the cleanup of water contaminated by lead. It was also indicated that, regardless on structure of the tested materials, the Pb(II) removal was spontaneous and exothermic. The fabricated mesoporous silicas exhibited that they were easy to regenerate and had excellent reusability.

n-Butane, iso-Butane and 1-Butene Adsorption on Imidazolium-Based Ionic Liquids Studied with Molecular Beam Techniques

The interaction of molecules, especially hydrocarbons, at the gas/ionic liquid (IL) surface plays a crucial role in supported IL catalysis. The dynamics of this process is investigated by measuring the trapping probabilities of n-butane, iso-butane and 1-butene on a set of frozen 1-alkyl-3-methylimidazolium-based ILs [Cn C1 Im]X, where n=4, 8 and X- =Cl- , Br- , [PF6 ]- and [Tf2 N]- . The decrease of the initial trapping probability with increasing surface temperature is used to determine the desorption energy of the hydrocarbons at the IL surfaces. It increases with increasing alkyl chain length n and decreasing anion size for the ILs studied. We attribute these effects to different degrees of alkyl chain surface enrichment, while interactions between the adsorbate and the anion do not play a significant role. The adsorption energy also depends on the adsorbing molecule: It decreases in the order n-butane>1-butene>iso-butane, which can be explained by different dispersion interactions.

Ti3C2 MXene with pillared structure for hybrid magnesium-lithium batteries cathode material with long cycle life and high rate capability

Cationic surfactants (CS) pillared Ti₃C₂ composites (Ti₃C₂/CS) were prepared by a facile electrostatic assembly method, which have large interlayer spacing and slight N-doping. In hybrid magnesium-lithium batteries (HMLBs), the Ti₃C₂/CS composites exhibit excellent performance by utilizing both Li⁺ and Mg²⁺ as charge carriers. Among these composites, the Ti₃C₂/CTAB (CTC) electrode displays a reversible capacity of 115.9 and 60 mAh g^-1 in APC/LiCl (APCL) and APC electrolytes at 0.1 A g^-1, and it also exhibits excellent high rate performance and ultralong cycle performance. It is verified that CS is vital to significantly improve the diffusion kinetics of Mg²⁺ on the electrode surface. The CS can act as the conductive "bridge" which connects different Ti₃C₂ layers and the interlayer pillar which expands the interlayer distance. In addition, the N element in CS is effective in neutralizing electronegativity and enhancing electrical conductivity for the CTC electrode. The electrode design strategy can adapt to the synthesis of cathode materials with high rate capability in HMLBs.

Experimental measurement and prediction of ionic liquid ionisation energies

Ionic liquid (IL) valence electronic structure provides key descriptors for understanding and predicting IL properties. The ionisation energies of 60 ILs are measured and the most readily ionised valence state of each IL (the highest occupied molecular orbital, HOMO) is identified using a combination of X-ray photoelectron spectroscopy (XPS) and synchrotron resonant XPS. A structurally diverse range of cations and anions were studied. The cation gave rise to the HOMO for nine of the 60 ILs presented here, meaning it is energetically more favourable to remove an electron from the cation than the anion. The influence of the cation on the anion electronic structure (and vice versa) were established; the electrostatic effects are well understood and demonstrated to be consistently predictable. We used this knowledge to make predictions of both ionisation energy and HOMO identity for a further 516 ILs, providing a very valuable dataset for benchmarking electronic structure calculations and enabling the development of models linking experimental valence electronic structure descriptors to other IL properties, e.g. electrochemical stability. Furthermore, we provide design rules for the prediction of the electronic structure of ILs.

Electron doping of single-walled carbon nanotubes using pyridine-boryl radicals

Pyridine-boryl (py-boryl) radicals serve as efficient electron-doping reagents for single-walled carbon nanotubes (SWCNTs). The doping mechanism comprises electron transfer from the py-boryl radical to the SWCNT. The formation of a stable py-boryl cation is essential for efficient doping; the captodative effect of the py-boryl cation is important to this process.

Controlled Nanostructuration of Cobalt Oxyhydroxide Electrode Material for Hybrid Supercapacitors

Nanostructuration is one of the most promising strategies to develop performant electrode materials for energy storage devices, such as hybrid supercapacitors. In this work, we studied the influence of precipitation medium and the use of a series of 1-alkyl-3-methylimidazolium bromide ionic liquids for the nanostructuration of β(III) cobalt oxyhydroxides. Then, the effect of the nanostructuration and the impact of the different ionic liquids used during synthesis were investigated in terms of energy storage performances. First, we demonstrated that forward precipitation, in a cobalt-rich medium, leads to smaller particles with higher specific surface areas (SSA) and an enhanced mesoporosity. Introduction of ionic liquids (ILs) in the precipitation medium further strongly increased the specific surface area and the mesoporosity to achieve well-nanostructured materials with a very high SSA of 265 m2/g and porosity of 0.43 cm3/g. Additionally, we showed that ILs used as surfactant and template also functionalize the nanomaterial surface, leading to a beneficial synergy between the highly ionic conductive IL and the cobalt oxyhydroxide, which lowers the resistance charge transfer and improves the specific capacity. The nature of the ionic liquid had an important influence on the final electrochemical properties and the best performances were reached with the ionic liquid containing the longest alkyl chain.

Fjord-Edge Graphene Nanoribbons with Site-Specific Nitrogen Substitution

The synthesis of graphene nanoribbons (GNRs) that contain site-specifically substituted backbone heteroatoms is one of the essential goals that must be achieved in order to control the electronic properties of these next generation organic materials. We have exploited our recently reported solid-state topochemical polymerization/cyclization-aromatization strategy to convert the simple 1,4-bis(3-pyridyl)butadiynes 3a,b into the fjord-edge nitrogen-doped graphene nanoribbon structures 1a,b (fjord-edge N₂[8]GNRs). Structural assignments are confirmed by CP/MAS ¹³C NMR, Raman, and XPS spectroscopy. The fjord-edge N₂[8]GNRs 1a,b are promising precursors for the novel backbone nitrogen-substituted N₂[8]_AGNRs 2a,b. Geometry and band calculations on N₂[8]_AGNR 2c indicate that this class of nanoribbons should have unusual bonding topology and metallicity.

Tuning the Cation-Anion Interactions by Methylation of the Pyridinium Cation: An X-ray Photoelectron Spectroscopy Study of Picolinium Ionic Liquids

X-ray photoelectron spectroscopy is used to investigate the impact of methylation on the electronic environment of pyridinium cations. Because of the electron-donating effect of the methyl group, there is a significant increase in electron density on the cationic nitrogen. The shift of the N 1s binding energy is inversely proportional to the anion basicity. The methylation position on the electronic environment of the cationic nitrogen is investigated. The N 1s binding energy follows the trend: 1-octylpyridinium > 1-octyl-3-picolinium > 1-octyl-4-picolinium > 1-octyl-2-picolinium, which is in good agreement with the cation acidity. The increase in the inductive effect subsequently weakens the cation-anion interactions through charge transfer from the anion to the cation, causing a subtle change in the electronic environment of the anion. Such an effect is noticeably reflected in the Br 3d binding energy. It shows that the Br 3d_5/2 binding energy of 1-octyl-2-picolinium bromide is 0.2 eV lower than that of 1-octylpyridinium bromide.

X-ray photoelectron spectroscopy of piperidinium ionic liquids: a comparison to the charge delocalised pyridinium analogues

In this study, nine piperidinium-based ionic liquids are analysed by X-ray photoelectron spectroscopy. The effect of alkyl substituent length and the nature of the anion on the electronic environment of the cation are investigated. The electronic environment of the hetero carbon and the cationic nitrogen is compared between two structurally similar cations, 1-octyl-1-methylpiperidinium ([C8C1Pip]+) versus 1-octylpyridinium ([C8Py]+). Due to the charge delocalisation, the hetero carbon component within [C8Py]+ is more positively charged, which exhibits much higher binding energy; whilst the cationic nitrogen component is in the similar electronic environment. The impact of the charge delocalisation on the electronic environment of the anion is also compared between [C8C1Pip]+ and [C8Py]+. It is found that for the more basic anion, the cation can significantly affect the electronic environment of the anion; for the less basic anion, such an effect concentrates on the component bearing more negative point charges.

Pyridinium-Functionalized Ionic Metal-Organic Frameworks Designed as Bifunctional Catalysts for CO2 Fixation into Cyclic Carbonates

Ionic metal-organic frameworks (MOFs) offer a new platform to design and construct complete heterogeneous bifunctional catalytic systems for the chemical fixation of CO₂ with epoxides. Herein, we developed a series of bifunctional pyridinium ionic MOF heterogeneous catalysts (66Pym-RXs and 67BPym-MeI) by the postsynthetic N-alkylation of noncoordinated pyridine sites in porous MOFs. The synergetic catalytic effect of acidic sites with nucleophilic anions in the ionic MOF significantly enhanced the catalytic activity toward the cycloaddition of CO₂ with epoxides to produce cyclic carbonates under cocatalyst-free and solvent-free mild conditions. The catalytic activity of ionic MOFs is easily tuned by the introduction of different alkyl groups into pyridinium cations and halide ions. The 66Pym-iPrI catalyst displayed the highest catalytic performance in terms of the turnover number value for the synthesis of cyclic carbonates. The proposed alternative method provides the means of developing functional N-heterocyclic groups for the new design of bifunctional ionic MOFs as potential heterogeneous catalysts for CO₂ fixation applications.

Probing the electronic structure of ether functionalised ionic liquids using X-ray photoelectron spectroscopy

The charge distribution associated with individual components in functionalised ionic liquids (ILs) can be tuned by careful manipulation of the substituent groups incorporated into the ions. Here we use X-ray photoelectron spectroscopy to investigate the impact of substituent atoms on the electronic structure of similar imidazolium-based systems each paired with a common anion, [Tf₂N]^-. The experimental measurements revealed an unexpected variation in the charge density distribution within the IL cation when the oxygen atom in a poly-ether containing side chain is moved by just one atomic position. This surprising observation is supported by density functional theory calculations.

Probing the impact of the N3-substituted alkyl chain on the electronic environment of the cation and the anion for 1,3-dialkylimidazolium ionic liquids

XPS is used to probe the impact of the N3-substituted alkyl chain on the electronic environment of the cation and the anion by comparing two types of imidazolium cations, 1-alkyl-3-butylimidazolium and 1-alkyl-3-methylimidazolium.

On the ionic liquid films 'pinned' by core-shell structured Fe3O4@carbon nanoparticles and their tribological properties

A strongly 'pinned' ionic liquid (IL, [BMIM][PF6]) film on a silicon (Si) surface via carbon capsuled Fe3O4 core-shell (Fe3O4@C) nanoparticles is achieved, revealing excellent friction-reducing ability at a high load. The adhesion force is measured to be ∼198 nN at the Fe3O4@C-Si interface by the Fe3O4@C colloidal AFM tip, which is stronger than that at both Fe3O4@C-Fe3O4@C (∼60 nN) and IL-Si (∼10 nN) interfaces, indicating a strong 'normal pin-force' towards the Si substrate. The resulting strengthened force enables the formation of lateral IL networks via the dipole-dipole attractions among Fe3O4 cores. The observed blue shift of the characteristic band related to the IL anion in the ATR-FTIR spectra confirmed the enhanced interaction. The N-Si, P-O chemical bonds formed as a result of the IL interactions with the Si substrate confirmed by XPS spectroscopy suggested that the IL lay on the Si plane. This orientation is favorable for Fe3O4@C nanoparticles to exert 'normal pin-force' and press the IL film strongly onto surfaces. The IL ions/clusters are thus anchored by these Fe3O4@C 'pins' onto the substrate to form a dense film, resulting in a smaller interaction size parameter, which is responsible for the reduced friction coefficient μ.

Electron spectroscopy of ionic liquids: experimental identification of atomic orbital contributions to valence electronic structure

The atomic contributions to valence electronic structure for 37 ionic liquids (ILs) are identified using a combination of variable photon energy XPS, resonant Auger electron spectroscopy (RAES) and a subtraction method. The ILs studied include a diverse range of cationic and anionic structural moieties. We introduce a new parameter for ILs, the energy difference between the energies of the cationic and anionic highest occupied fragment orbitals (HOFOs), which we use to identify the highest occupied molecular orbital (HOMO). The anion gave rise to the HOMO for 25 of the 37 ILs studied here. For 10 of the ILs, the energies of the cationic and anionic HOFOs were the same (within experimental error); therefore, it could not be determined whether the HOMO was from the cation or the anion. For two of the ILs, the HOMO was from the cation and not from the anion; consequently it is energetically more favourable to remove an electron from the cation than the anion for these two ILs. In addition, we used a combination of area normalisation and subtraction of XP spectra to produce what are effectively XP spectra for individual ions; this was achieved for 10 cations and 14 anions.

Understanding the effects of ionic liquids on a unimolecular substitution process: correlating solvent parameters with reaction outcome

The polarisability of an ionic liquid is key in determining the rate constant of a unimolecular substitution process.

The impact of cation acidity and alkyl substituents on the cation–anion interactions of 1-alkyl-2,3-dimethylimidazolium ionic liquids

XPS is used to probe the cation–anion interactions in 1-alkyl-2,3-dimethylimidazolium ionic liquids.

Resolving X-ray photoelectron spectra of ionic liquids with difference spectroscopy

X-ray photoelectron spectroscopy (XPS) is a powerful element-specific technique to determine the composition and chemical state of all elements in an involatile sample. However, for elements such as carbon, the wide variety of chemical states produce complex spectra that are difficult to interpret, consequently concealing important information due to the uncertainty in signal identity. Here we report a process whereby chemical modification of carbon structures with electron withdrawing groups can reveal this information, providing accurate, highly refined fitting models far more complex than previously possible. This method is demonstrated with functionalised ionic liquids bearing chlorine or trifluoromethane groups that shift electron density from targeted locations. By comparing the C 1s spectra of non-functional ionic liquids to their functional analogues, a series of difference spectra can be produced to identify exact binding energies of carbon photoemissions, which can be used to improve the C 1s peak fitting of both samples. Importantly, ionic liquids possess ideal chemical and physical properties, which enhance this methodology to enable significant progress in XPS peak fitting and data interpretation.

XPS enables visualization of electrode potential screening in an ionic liquid medium with temporal- and lateral-resolution

We present an X-ray photoelectron spectroscopic (XPS) investigation of potential screening across two gold electrodes fabricated on a porous polymer surface which is impregnated with the ionic liquid (IL) N-N-diethyl-N-methyl-N-(2-methoxyethyl)ammonium bis(trifluoromethanesulfonyl)imide [DEME-TFSI]. The IL provides a sheet of conducting layers to the insulating polymer film, and allows monitoring charging and screening dynamics at the polymer + IL/vacuum interface in a laterally resolved fashion across the electrodes. Time-resolved measurements are also implemented by recording F1s peaks of the IL, while imposing 10 mHz square-wave (SQW) pulses across the two electrodes in a source-drain geometry. Variations in the F1s binding energy reflect directly the transient local electrical potential, and allow us to visualize screening of the otherwise built-in local voltage drop on and across the metal electrodes in the range of millimeters. Accordingly, the device is partitioned into two oppositely polarized regions, each following polarization of one electrode through the IL medium. On the other extreme, upon imposing relatively fast 1 kHz SQW pulses the charge screening is prevented and the device is brought to assume a simple resistor role. A simple equivalent circuit model also reproduces the observed voltage transients qualitatively. The presented structure and variants of XPS measurements, enabling us to record voltage transients in unexpectedly large lateral distances away from the electrodes, can impact the understanding of various electrochemical concepts.

Dielectric properties of a bisimidazolium salt with dodecyl sulfate anion doped with carbon nanotubes

A new bisimidazolium salt with dodecyl sulfate as counterion has been designed and prepared. This salt shows a SmA phase that is stable at room temperature. The new ionic liquid crystal (ILC) was characterized by ¹H NMR, ¹³C NMR and IR spectroscopy. Its liquid crystalline properties were analyzed by polarizing optical microscopy (POM), differential scanning calorimetry (DSC) and powder X-ray diffraction (XRD) studies. The dielectric spectra of the ILC doped with different concentrations of carbon nanotubes (CNT) were recorded over a wide frequency and temperature range of 10^-1 to 10⁷ Hz and 293-338 K, respectively. The values of the activation energy were found in the range of 0.46-0.61 eV; the characteristic time was obtained by fitting the spectra of the dielectric loss with the Havriliak-Negami functions. As a result of doping the ILC with CNT, the electric conductivity increases significantly. Ionic conductivity is dominant and it was indirectly observed through the electrode polarization (EP) effect. The very high dielectric permittivity values and the decrease of the electric conductivity at low frequencies confirm the presence of EP.

Cross-linked chitosan with a dicationic ionic liquid as a recyclable biopolymer-supported catalyst for cycloaddition of carbon dioxide with epoxides into cyclic carbonates

A dicationc ionic liquid was synthesized and immobilized on chitosan as a catalyst for cycloaddition of CO₂ with epoxides for synthesis of cyclic carbonates.

Atomic charges of sulfur in ionic liquids: experiments and calculations

A wide variety of experimental and computational methods are used to probe sulfur atomic charges in ionic liquids.

Anion–π interactions of highly π-acidic dipyridinium-naphthalene diimide salts

A highly π-acidic dipyridinium-naphthalene diimide acceptor shows anion–π interactions with halides and PF₆⁻.