Formation Mechanism of Atmospheric Ammonium Bisulfate: Hydrogen-Bond-Promoted Nearly Barrierless Reactions of SO3 with NH3 and H2 O

Long-term exposure to PM2.5 species and all-cause mortality among Medicare patients using mixtures analyses

BACKGROUND

The relationship between long-term exposure to PM2.5 and mortality is well-established; however, the role of individual species is less understood.

OBJECTIVES

In this study, we assess the overall effect of long-term exposure to PM2.5 as a mixture of species and identify the most harmful of those species while controlling for the others.

METHODS

We looked at changes in mortality among Medicare participants 65 years of age or older from 2000 to 2018 in response to changes in annual levels of 15 PM2.5 components, namely: organic carbon, elemental carbon, nickel, lead, zinc, sulfate, potassium, vanadium, nitrate, silicon, copper, iron, ammonium, calcium, and bromine. Data on exposure were derived from high-resolution, spatio-temporal models which were then aggregated to ZIP code. We used the rate of deaths in each ZIP code per year as the outcome of interest. Covariates included demographic, temperature, socioeconomic, and access-to-care variables. We used a mixtures approach, a weighted quantile sum, to analyze the joint effects of PM2.5 species on mortality. We further looked at the effects of the components when PM2.5 mass levels were at concentrations below 8 μg/m3, and effect modification by sex, race, Medicaid status, and Census division.

RESULTS

We found that for each decile increase in the levels of the PM2.5 mixture, the rate of all-cause mortality increased by 1.4% (95% CI: 1.3%-1.4%), the rate of cardiovascular mortality increased by 2.1% (95% CI: 2.0%-2.2%), and the rate of respiratory mortality increased by 1.7% (95% CI: 1.5%-1.9%). These effects estimates remained significant and slightly higher when we restricted to lower concentrations. The highest weights for harmful effects were due to organic carbon, nickel, zinc, sulfate, and vanadium.

CONCLUSIONS

Long-term exposure to PM2.5 species, as a mixture, increased the risk of all-cause, cardiovascular, and respiratory mortality.

Significant influence of water molecules on the SO3 + HCl reaction in the gas phase and at the air-water interface

The products resulting from the reactions between atmospheric acids and SO3 have a catalytic effect on the formation of new particles in aerosols. However, the SO3 + HCl reaction in the gas-phase and at the air-water interface has not been considered. Herein, this reaction was explored exhaustively by using high-level quantum chemical calculations and Born Oppenheimer molecular dynamics (BOMD) simulations. The quantum calculations show that the gas-phase reaction of SO3 + HCl is highly unlikely to occur under atmospheric conditions with a high energy barrier of 22.6 kcal mol-1. H2O and (H2O)2 play obvious catalytic roles in reducing the energy barrier of the SO3 + HCl reaction by over 18.2 kcal mol-1. The atmospheric lifetimes of SO3 show that the (H2O)2-assisted reaction dominates over the H2O-assisted reaction within the altitude range of 0-5 km, whereas the H2O-assisted reaction is more favorable within an altitude range of 10-50 km. BOMD simulations show that H2O-induced formation of the ClSO3-⋯H3O+ ion pair and HCl-assisted formation of the HSO4-⋯H3O+ ion pair were identified at the air-water interface. These routes followed a stepwise reaction mechanism and proceeded at a picosecond time scale. Interestingly, the formed ClSO3H in the gas phase has a tendency to aggregate with sulfuric acids, ammonias, and water molecules to form stable clusters within 40 ns simulation time, while the interfacial ClSO3- and H3O+ can attract H2SO4, NH3, and HNO3 for particle formation from the gas phase to the water surface. Thus, this work will not only help in understanding the SO3 + HCl reaction driven by water molecules in the gas-phase and at the air-water interface, but it will also provide some potential routes of aerosol formation from the reaction between SO3 and inorganic acids.

Uncovering the centrality of mono-dentate SO32-/SO42- modifiers grafted on a metal vanadate in accelerating wet NOX reduction and poison pyrolysis

NOX rarely binds with labile oxygens of catalytic solids, whose Lewis acidic (LA) species possess higher binding strengths with NH3 (ENH3) and H2O than Brönsted acidic counterparts (BA--H+; -OH), oftentimes leading to elevate energy barrier (EBARRIER) and weaken H2O tolerance, respectively. These limit NH3-assisted wet NOX reduction via Langmuir-Hinshelwood-type or Eley-Rideal (ER)-type model on LA species, while leaving ER-type analogue on BA--H+ species proper to reduce wet NOX. Given hard-to-regulate strength/amount of -OH species and occasional association between ENH3 and EBARRIER, Ni1V2O6 (Ni1) was rationally chosen as a platform to isolate mono-dentate SO32-/SO42- species for use as BA--H+ bonds via protonation to increase collision frequency (k'APP,0) alongside with disclosure of advantages of SO32-/SO42--functionalized Ni1V2O6 (Ni1-S) over Ni1 in reducing wet NOX. Ni1-S outperformed Ni1 in achieving a larger BA--H+ quantity (k'APP,0↑), increasing H2O tolerance, and elevating oxygen mobility, thus promoting NOX reduction activity/consequences under SO2-excluding gases. V2O5-WO3 composite simulating a commercial catalyst could isolate mono-dentate SO32-/SO42- species and served as a control (V2O5-WO3-S) for comparison. Ni1-S was superior to V2O5-WO3-S in evading ammonium (bi-)sulfate (AS/ABS) poison accumulation and expediting AS/ABS pyrolysis efficiency, thereby improving AS/ABS resistance under SO2-including gases, while enhancing resistance against hydro-thermal aging.

Variation of nitrate and nitrite in condensable particulate matter from coal-fired power plants under the simulated rapid condensing conditions

In this work, condensation temperature, H₂O vapor, SO₂, SO₃ and NH₃ were studied to explore the formation mechanism of nitrate ions (NO₃^-) and nitrite ions (NO₂^-) in condensable particulate matter (CPM) discharged by ultra-low emission coal-fired power plants. Some important results were obtained: (i) The concentration of NO₃^- and NO₂^- increased with the decrease of condensation temperature, and H₂O vapor could also promote the formation of NO₃^- and NO₂^-. (ii) The effects of SO₂ and SO₃ varied at different saturated states of flue gas, which was caused by the redox reaction of SO₂ and NO_X or the formation of H₂SO₄. (iii) NH₃ could promote the nucleation of NO₃^- and NO₂^-, and the promotion effect also existed in the existence of SO₂ or SO₃. It is worth mentioning that SO₃ and SO₂ might synergistically inhibit the formation of NO₃^- and NO₂^-, regardless of the presence of NH₃. The research results would enrich peoples understanding of the chemical and physical characteristics of NO₃^- and NO₂^- in CPM and provide a basic reference for the control of CPM emitted from coal-fired power plants.

Physicochemical characteristics of polycyclic aromatic hydrocarbons in condensable particulate matter from coal-fired power plants: A laboratory simulation

The objective of this study was to examine the physicochemical characteristics of polycyclic aromatic hydrocarbons (PAHs) in condensable particulate matter (CPM) during fast condensation (within several seconds). The concentration of PAHs increased as the condensation temperature decreased, indicating that the conversion of gaseous PAHs to CPM would be enhanced at low temperatures. PAH concentrations increased in relation to the number of rings in the fragment, with the high-ring (4-,5- and 6-ring) PAHs accounting for 89.70-92.30% and 99.78-99.80% of the total concentration and total toxic equivalent of PAHs. In addition, particulate-phase PAHs (0.1-1.0 μm), developed through the synergistic effect of PAHs and fine particles, were difficult to collect by fast condensation. Inorganic fine particles could be formed when ammonia-rich conditions prevail, reducing PAH condensation further. Furthermore, CPM was morphologically and chemically characterized. During the experiment, fine and well-aggregated CPMs were detected on the membrane, and the diameter of CPMs was further enhanced by the addition of 16 PAHs. Most of the C element was collected in the rinse fluid, thus indicating that PAHs in CPM were collected through condensation. Based on these findings, basic guidelines can be provided for the control of PAHs in flue gas from coal-fired power plants.

Insights into size-segregated particulate chemistry and sources in urban environment over central Indo-Gangetic Plain

Size-segregated airborne fine (PM_2.1) and coarse (PM_>2.1) particulates were measured in an urban environment over central Indo-Gangetic plain in between 2015 and 2018 to get insights into its nature, chemistry and sources. Mean (±1σ) concentration of PM_2.1 was 98 (±76) μgm^-3 with a seasonal high during winter (DJF, 162 ± 71 μgm^-3) compared to pre-monsoon specific high in PM_>2.1 (MAMJ, 177 ± 84 μgm^-3) with an annual mean of 170 (±69) μgm^-3. PM_2.1 was secondary in nature with abundant secondary inorganic aerosols (20% of particulate mass) and water-soluble organic carbon (19%) against metal enriched (25%) PM_>2.1, having robust signature of resuspensions from Earth's crust and road dust. Ammonium-based neutralization of particulate acidity was essentially in PM_2.1 with an indication of predominant H₂SO₄ neutralization in bisulfate form compared to Ca²⁺ and Mg²⁺-based neutralization in PM_>2.1. Molecular distribution of n-alkanes homologues (C₁₇-C₃₅) showed C_max at C₂₃ (PM_2.1) and C₁₈ (PM_>2.1) with weak dominance of odd-numbered n-alkanes. Carbon preference index of n-alkanes was close to unity (PM_2.1: 1.4 ± 0.3; PM_>2.1: 1.3 ± 0.4). Fatty acids (C₁₂-C₂₆) were characterized with predominance of even carbon with C_max at n-hexadecanoic acid (C_16:0). Low to high molecular weight fatty acid ratio ranged from 2.0 (PM_>2.1) to 5.6 (PM_2.1) with vital signature of anthropogenic emissions. Levoglucosan was abundant in PM_2.1 (758 ± 481 ngm^-3) with a high ratio (11.6) against galactosan, emphasizing robust contribution from burning of hardwood and agricultural residues. Receptor model resolves secondary aerosols and biomass burning emissions (45%) as the most influential sources of PM_2.1 whereas, crustal (29%) and secondary aerosols (29%) were found responsible for PM_>2.1; with significant variations among the seasons.

Evolution of Condensable Fine Particle Size Distribution in Simulated Flue Gas by External Regulation for Growth Enhancement

Condensation fine particles (CFPs) from coal-fired flue gas harm humans and the environment after being emitted into the atmosphere. Given their small size (<0.1 μm), difficulty arises in efficiently removing CFPs by wet electrostatic precipitators and mist eliminators. In this work, a laboratory apparatus was used to study the CFP growth under simulated power plant conditions. Four methods were independently investigated to increase the particle size: addition of ammonia, addition of fly ash, decreasing temperature, and applying an electrical discharge. Results demonstrated that the CFP size distribution possessed a unimodal structure with peak at 0.05 μm. At increased ammonia concentration from 10 to 30 ppm, the peak of growth factor shifted rightward and increased from 1.21 to 1.35 and the range of growth factor >1 was significantly broadened due to joint action of multiple mechanisms. Fly ash acted as the core, and CFPs adhered to the ash surface when forming ash-salt droplets. Cooling flue gas could also enhance the CFP growth due to vapor condensation. At decreased temperature from 45 to 30 °C, the median diameter of CFPs increased by 15%. Finally, the growth and agglomeration of CFPs can be further enhanced when an external electrical field was utilized. The size range of growth factor >1 can be broadened, and the peak growth factor significantly increased at 8 kV applied voltage. The research findings provide valuable guidance for effectively improving the CFP removal efficiency by external regulation for growth enhancement.