Hierarchically Organized NiCo 2 O 4 Microflowers Anchored on Multiwalled Carbon Nanotubes: Efficient Bifunctional Electrocatalysts for Oxygen and Hydrogen Evolution Reactions

Nickel-Molybdenum-Based Three-Dimensional Nanoarrays for Oxygen Evolution Reaction in Water Splitting

Water splitting is an important approach to hydrogen production. But the efficiency of the process is always controlled by the oxygen evolution reaction process. In this study, a three-dimensional nickel-molybdenum binary nanoarray microstructure electrocatalyst is successfully synthesized. It is grown uniformly on Ni foam using a hydrothermal method. Attributed to their unique nanostructure and controllable nature, the Ni-Mo-based nanoarray samples show superior reactivity and durability in oxygen evolution reactions. The series of Ni-Mo-based electrocatalysts presents a competitive overpotential of 296 mV at 10 mA·cm-2 for an OER in 1.0 M KOH, corresponding with a low Tafel slope of 121 mV dec-1. The three-dimensional nanostructure has a large double-layer capacitance and plenty of channels for ion transfer, which demonstrates more active sites and improved charge transmission. This study provides a valuable reference for the development of non-precious catalysts for water splitting.

Fabrication of carbon-based materials derived from a cobalt-based organic framework for enhancing photocatalytic degradation of dyes

The pyrolysis of metal-organic frameworks (MOFs) has emerged as a promising route to synthesize carbon/metal oxide-based materials with diverse phase compositions, morphologies, sizes and surface areas. In this paper, 1,3,5-benzoic acid (BTC) and 2,4,6-tri(4-pyridinyl)-1-pyridine (TPP) were used as ligands to prepare a novel cobalt-based MOF (Co-MOF) which was used as a precursor to obtain five carbon-based materials at different temperatures (Co-C200/400/600/800/1000). Furthermore, five dyes were used as degradation targets to investigate the photocatalytic degradation performance of the title materials under UV light irradiation. Co-C1000 exhibited the best photocatalytic degradation performance for methyl orange (MO), and the degradation rate could reach 99.21%. The enhanced photocatalytic activity was attributed to narrower band-gaps and a synergistic effect originating from the well-aligned straddling band structures between Co/CoO/Co3O4 and C, also resulting in a faster interfacial charge transfer during the photocatalytic reaction. This study will aid in the development of photocatalysts generated from carbon-based materials via the pyrolysis transformation of MOFs, therefore greatly enhancing the photocatalytic performance.

Polyolefin-derived substrate-grown carbon nanotubes as binder-free electrode for hydrogen evolution in alkaline media

Switching from a linear mode of waste management to a circular loop by transforming plastic waste into carbon nanotubes (CNTs) is a promising approach to current plastic waste treatment. One of the many applications of CNTs is its use for electrocatalytic water splitting for hydrogen evolution. Existing methods of CNTs-based hydrogen evolution reaction (HER) electrode fabrication involve additives like polymeric binders and additional steps to improve CNT dispersion, which are detrimental to the CNT structure and properties. The in-situ fabrication approach can potentially be a one-pot solution to HER electrode synthesis. In this study, polyolefins pyrolysis gas and a Co:Ni:Mg catalyst were used to fabricate binder-free CNTs-based electrodes on different substrates for HER. The study assessed CNT quality on conductive carbon paper, semiconductive silicon, and dielectric glass substrates, evaluating their HER performance in 1 M KOH. A mixture of hollow-core, bamboo-like, and cup-stacked arrangement nanotubes were synthesized on the substrates, with CNTs on glass and carbon paper substrates possessing better graphitization than CNTs grown on silicon. This is in agreement with HER performance, whereby the as-prepared electrodes required overpotentials of 267 mV, 241 mV, and 216 mV for silicon, glass, and carbon paper, respectively, to achieve 10 mA/cm2. Despite being poorly conductive, the glass substrate electrode achieved a lower overpotential than the silicon electrode. Additionally, the as-prepared silicon electrode faced a delamination issue likely attributed to the lower surface energy of the silicon substrate surface, demonstrating the weaker adhesion between the CNTs and silicon surface. The proposed approach thus showed that the in-situ fabricated electrodes performed better than separately synthesized CNTs prepared into electrodes by 27.4% and 14.2% for carbon paper and glass substrates, respectively. The improved performance of the as-prepared, binder-free electrodes can be linked to the lower charge-transfer resistance and reduced contact resistance between the CNTs and substrate.

Recent Progress on Bimetallic-Based Spinels as Electrocatalysts for the Oxygen Evolution Reaction

Electrocatalytic water splitting is a promising and viable technology to produce clean, sustainable, and storable hydrogen as an energy carrier. However, to meet the ever-increasing global energy demand, it is imperative to develop high-performance non-precious metal-based electrocatalysts for the oxygen evolution reaction (OER), as the OER is considered the bottleneck for electrocatalytic water splitting. Spinels, in particular, are considered promising OER electrocatalysts due to their unique properties, precise structures, and compositions. Herein, the recent progress on the application of bimetallic-based spinels (AFe₂ O₄ , ACo₂ O₄ , and AMn₂ O₄ ; where A = Ni, Co, Cu, Mn, and Zn) as electrocatalysts for the OER is presented. The fundamental concepts of the OER are highlighted after which the family of spinels, their general formula, and classifications are introduced. This is followed by an overview of the various classifications of bimetallic-based spinels and their recent developments and applications as OER electrocatalysts, with special emphasis on enhancing strategies that have been formulated to improve the OER performance of these spinels. In conclusion, this review summarizes all studies mentioned therein and provides the challenges and future perspectives for bimetallic-based spinel OER electrocatalysts.

NiCo2O4 nanoparticles inlaid on sulphur and nitrogen doped and co-doped rGO sheets as efficient electrocatalysts for the oxygen evolution and methanol oxidation reactions

The present work depicts the fabrication of NiCo₂O₄ decorated on rGO, and doped and co-doped rGO and its electrocatalytic activity towards the oxygen evolution reaction and methanol oxidation reaction. The NiCo₂O₄ catalyst with S-doped rGO outperformed the other catalysts, indicating that the sulphur atoms attached on rGO possess low oxophilicity and optimum free energy. This results in facile adsorption of the intermediate products formed during the OER and a rapid release of O₂ molecules. The same catalyst requires an overpotential of 1.51 V vs. RHE to attain the benchmark current density value of 10 mA cm^-2 and shows a Tafel slope of 57 mV dec^-1. It also reveals outstanding stability during its operation for 10 h with a minimum loss in potential. On the other hand, NiCo₂O₄/S,N-rGO reveals superior activity with high efficiency and stability in catalyzing methanol oxidation. The catalyst delivered a low onset potential of 0.12 V vs. Hg/HgO and high current density of 203.4 mA cm^-2 after addition of 0.5 M methanol, revealing the outstanding performance of the electrocatalyst.

Identification of the Active Sites of NiCo2O4 and the Support Effect with Carbon Nanotubes for Oxygen Reduction Catalysis

Since the active site of spinel NiCo₂O₄ as an oxygen reduction reaction (ORR) catalyst is under debate, the optimal active sites of NiCo₂O₄ are identified by investigating the catalytic properties of two models of NiCo₂O₄. The results indicate that the ORR activity of five studied active sites of isolated NiCo₂O₄ is primarily limited by excessively binding of *OH, and the Co^III and Ni^III active sites of Co²⁺[Co³⁺Ni³⁺]O₄ are identified as the optimal catalytic sites with overpotentials of 0.69 and 0.76 V, respectively. Moreover, for the investigation of the support effect, the isolated NiCo₂O₄ is supported on pristine and N-doped carbon nanotube (CNT and NCNT). Encouragingly, the ORR activity of Co^III and Ni^III active sites is improved after NiCo₂O₄ is supported on CNT and NCNT due to the weakened binding of *OH. When NiCo₂O₄ is supported on NCNT via the Co^II ion, the rate-determining step of ORR catalyzed by Co^III and Ni^III sites is altered. Moreover, this Co^III site exhibits the highest ORR activity and displays an overpotential of only 0.45 V. Therefore, the support effect can improve the catalytic activity as well as change the mechanism of ORR. This study presents more insights into the active sites and ORR activity of NiCo₂O₄.

Co3O4@NiCo2O4 double-shelled nanocages with hierarchical hollow structure and oxygen vacancies as efficient bifunctional electrocatalysts for rechargeable Zn-air batteries

Highly efficient bifunctional oxygen electrocatalysts for oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) are crucially important for the rechargeable Zn-air battery, a potential power source for applications in electric vehicles and grid-scale stationary storage systems. Herein, Co3O4@NiCo2O4 double-shelled nanocages (Co3O4@NiCo2O4 DSNCs) with hierarchical hollow structure and oxygen vacancies were designed and synthesized via annealing metal-organic frameworks. Co3O4@NiCo2O4 DSNCs with large specific surface area and three-dimensional interconnected mesopores and cavity not only provide more reaction sites, but also offer an efficient transport environment for reactants. Moreover, oxygen vacancies on the surfaces improve the capture of oxygen species to enhance the reactivity of the catalyst. Consequently, Co3O4@NiCo2O4 DSNCs displayed excellent bifunctional electrocatalytic performance, with a positive half-wave potential of 0.81 V (vs. reversible hydrogen electrode, RHE) for ORR (approaching the potential of commercial Pt/C catalyst) and a low potential of 1.65 V at 10 mA cm-2 for OER (exceeding Pt/C). In a practical demonstration, the Zn-air battery using Co3O4@NiCo2O4 DSNCs as the cathode delivered a satisfactory power density of 102.1 mW cm-2, comparable to the Zn-air battery with a Pt/C cathode, and exhibited much longer cycling stability.

Study of “Ni-doping” and “open-pore microstructure” as physico-electrochemical stimuli towards the electrocatalytic efficiency of Ni/NiO for the oxygen evolution reaction

Added “Ni-doping” and “open-pore microstructure” act as physico-electrochemical stimuli towards enhanced electrocatalytic efficiency and electromechanical stability of Ni/NiO for the low-overpotential oxygen evolution reaction in alkaline medium.