The renewable chemicals industry

Direct photocatalytic C-H functionalization mediated by a molybdenum dioxo complex

Direct photocatalytic C-H activation mediated by MoO2Cl2(bpy-tBu), a unique photoactive metal OXO, is presented. The limiting step, reoxidation to the Mo dioxo, is evaluated and proposed to occur via a key Cl- loss event. Photocatalyst degradation occurs upon substitution of bpy-tBu with H2O generated during catalysis.

Lignin phenolation by graft copolymerization to boost its reactivity

Lignin is the most abundant phenolic biopolymer and a renewable resource of aromatics. It can be used as a phenol substitute in the synthesis of phenolic resins. However, lignin is not as reactive as phenol, so phenolation is generally carried out to improve lignin reactivity. In this work, we suggest a solution to circumvent the limitations of traditional phenolation (e.g., high temperature, strong acids/bases, limited reactivity, and phenol toxicity). We first attempt new lignin phenolation by graft copolymerization in which polymeric phenol, instead of toxic phenol, is introduced to lignin. Organosolv lignin from hardwood was modified with 2-bromoisobutyryl bromide to act as a lignin macroinitiator (L-Br). A protected phenolic monomer, 4-acetoxystyrene, was graft copolymerized onto L-Br using CuBr2/tris[2-(dimethylamino)ethyl]amine as a catalyst/ligand, after which the resultant lignin copolymer was deacetylated to produce lignin grafted with poly(4-hydroxystyrene). This poly-phenolation process was conducted at room temperature without the strong acids/bases and toxic phenol required in conventional phenolation. The poly-phenolated lignin was analyzed using 1H-, 13C-, and 31P NMR spectroscopy and gel permeation chromatography. This novel phenolation process enhanced the reactive sites of lignin more than tenfold. It also reduced the dark color of technical lignins significantly, thereby overcoming a serious obstacle to their applicability.

Development of a Highly Selective NAD+ -Dependent Glyceraldehyde Dehydrogenase and its Application in Minimal Cell-Free Enzyme Cascades

Anthropogenic climate change has been caused by over-exploitation of fossil fuels and CO2 emissions. To counteract this, the chemical industry has shifted its focus to sustainable chemical production and the valorization of renewable resources. However, the biggest challenges in biomanufacturing are technical efficiency and profitability. In our minimal cell-free enzyme cascade generating pyruvate as the central intermediate, the NAD+ -dependent, selective oxidation of D-glyceraldehyde was identified as a key reaction step to improve the overall cascade flux. Successive genome mining identified one candidate enzyme with 24-fold enhanced activity and another whose stability is unaffected in 10 % (v/v) ethanol, the final product of our model cascade. Semi-rational engineering improved the substrate selectivity of the enzyme up to 21-fold, thus minimizing side reactions in the one-pot enzyme cascade. The final biotransformation of D-glucose showed a continuous linear production of ethanol (via pyruvate) to a final titer of 4.9 % (v/v) with a molar product yield of 98.7 %. Due to the central role of pyruvate in diverse biotransformations, the optimized production module has great potential for broad biomanufacturing applications.

Rhizospheric soil chromium toxicity and its remediation using plant hyperaccumulators

The hyper-accumulation of chromium in its hexavalent form is treated as a hazardous soil pollutant at industrial and mining sites. Excessive accumulation of Cr6+ in soil threatens the environmental health and safety of living organisms. Out of two stable forms of chromium, Cr6+ is highly responsible for ecotoxicity. The expression of the high toxicity of Cr6+ at low concentrations in the soil environment indicates its lethality. It is usually released into the soil during various socio-economic activities. Sustainable remediation of Cr6+ contaminated soil is of utmost need and can be carried out by employing suitable plant hyperaccumulators. Alongside the plant's ability to sequester toxic metals like Cr6+, the rhizospheric soil parameters play a significant role in this technique and are mostly overlooked. Here we review the application of a cost-effective and eco-friendly remediation technology at hyperaccumulators rhizosphere to minimize the Cr6+ led soil toxicity. The use of selected plant species along with effective rhizospheric activities has been suggested as a technique to reduce Cr6+ toxicity on soil and its associated biota. This soil rectification approach may prove to be sustainable and advantageous over other possible techniques. Further, it may open up new solutions for soil Cr6+ management at polluted sites.

l-Theanine Goes Greener: A Highly Efficient Bioprocess Catalyzed by the Immobilized γ-Glutamyl Transferase from Bacillus subtilis

l-Theanine (l-Th) was synthesized by simply mixing the reactants (l-glutamine and ethylamine in water) at 25 °C and Bacillus subtilis γ-glutamyl transferase (BsGGT) covalently immobilized on glyoxyl-agarose according to a methodology previously reported by our research group; neither buffers, nor other additives were needed. Ratio of l-glutamine (donor) to ethylamine (acceptor), pH, enzymatic units (IU), and reaction time were optimized (molar ratio of donor/acceptor=1 : 8, pH 11.6, 1 IU mL^-1 , 6 h), furnishing l-Th in 93 % isolated yield (485 mg, 32.3 g L^-1 ) and high purity (99 %), after a simple filtration of the immobilized biocatalyst, distillation of the volatiles (unreacted ethylamine) and direct lyophilization. Immobilized BsGGT was re-used (four reaction cycles) with 100 % activity retention. This enzymatic synthesis represents a straightforward, fast, high-yielding, and easily scalable approach to l-Th preparation, besides having a favorable green chemistry metrics.

Metabolic engineering to improve production of 3-hydroxypropionic acid from corn-stover hydrolysate in Aspergillus species

BACKGROUND

Fuels and chemicals derived from non-fossil sources are needed to lessen human impacts on the environment while providing a healthy and growing economy. 3-hydroxypropionic acid (3-HP) is an important chemical building block that can be used for many products. Biosynthesis of 3-HP is possible; however, low production is typically observed in those natural systems. Biosynthetic pathways have been designed to produce 3-HP from a variety of feedstocks in different microorganisms.

RESULTS

In this study, the 3-HP β-alanine pathway consisting of aspartate decarboxylase, β-alanine-pyruvate aminotransferase, and 3-hydroxypropionate dehydrogenase from selected microorganisms were codon optimized for Aspergillus species and placed under the control of constitutive promoters. The pathway was introduced into Aspergillus pseudoterreus and subsequently into Aspergillus niger, and 3-HP production was assessed in both hosts. A. niger produced higher initial 3-HP yields and fewer co-product contaminants and was selected as a suitable host for further engineering. Proteomic and metabolomic analysis of both Aspergillus species during 3-HP production identified genetic targets for improvement of flux toward 3-HP including pyruvate carboxylase, aspartate aminotransferase, malonate semialdehyde dehydrogenase, succinate semialdehyde dehydrogenase, oxaloacetate hydrolase, and a 3-HP transporter. Overexpression of pyruvate carboxylase improved yield in shake-flasks from 0.09 to 0.12 C-mol 3-HP C-mol^-1 glucose in the base strain expressing 12 copies of the β-alanine pathway. Deletion or overexpression of individual target genes in the pyruvate carboxylase overexpression strain improved yield to 0.22 C-mol 3-HP C-mol^-1 glucose after deletion of the major malonate semialdehyde dehydrogenase. Further incorporation of additional β-alanine pathway genes and optimization of culture conditions (sugars, temperature, nitrogen, phosphate, trace elements) for 3-HP production from deacetylated and mechanically refined corn stover hydrolysate improved yield to 0.48 C-mol 3-HP C-mol^-1 sugars and resulted in a final titer of 36.0 g/L 3-HP.

CONCLUSIONS

The results of this study establish A. niger as a host for 3-HP production from a lignocellulosic feedstock in acidic conditions and demonstrates that 3-HP titer and yield can be improved by a broad metabolic engineering strategy involving identification and modification of genes participated in the synthesis of 3-HP and its precursors, degradation of intermediates, and transport of 3-HP across the plasma membrane.

Biocatalysis as Key to Sustainable Industrial Chemistry

The role and power of biocatalysis in sustainable chemistry has been continuously brought forward step by step to its present outstanding position. The problem-solving capabilities of biocatalysis have been realized by numerous substantial achievements in biology, chemistry and engineering. Advances and breakthroughs in the life sciences and interdisciplinary cooperation with chemistry have clearly accelerated the implementation of biocatalytic synthesis in modern chemistry. Resource-efficient biocatalytic manufacturing processes have already provided numerous benefits to sustainable chemistry as well as customer-centric value creation in the pharmaceutical, food, flavor, fragrance, vitamin, agrochemical, polymer, specialty, and fine chemical industries. Biocatalysis can make significant contributions not only to manufacturing processes, but also to the design of completely new value-creation chains. Biocatalysis can now be considered as a key enabling technology to implement sustainable chemistry.

Taking the Green Road Towards Pharmaceutical Manufacturing

The introduction of the Green Chemistry Principles in the late 1990s formed the basis for a transition to a greener environment. These Principles have become an integral part in the work on designing chemical processes, especially for large-scale manufacture. The ultimate target is the achievement of a sustainable production method allowing hundreds of tons of valuable materials to be prepared. For this purpose, a holistic view must be applied to the elements constituting a fully-fledged process encompassing layout of the synthetic route, defining starting materials and their origin, output of product and quality features, quantity of effluent streams and waste, recovery and recycling of chemicals involved, and energy consumption. These parameters form a complex matrix where the individual components are in a complicated relationship with each other. This short review addresses these issues and the benefits of life-cycle assessment and metrics commonly used to measure the performance of chemical manufacturing – all from a pharmaceutical industry perspective as experienced by the author.

1 Introduction: Facing Severe Challenges

2 The Historical Context: Addressing an Image Problem

3 Prospects, Drivers and Roadmap for the Green Future

4 Living by the Principles: Industrial Perspectives

5 Taking the Green Route – Catalysis Leading the Way: Case Stories

6 State of the Art: How Green Are We?

7 Sending Signals, Creating Impressions: Focus on Communication

8 Conclusions

Dehydration of Fructose to 5-Hydroxymethylfurfural: Effects of Acidity and Porosity of Different Catalysts in the Conversion, Selectivity, and Yield

There is a demand for renewable resources, such as biomass, to produce compounds considered as platform molecules. This study deals with dehydration of fructose for the formation of 5-hydroxymethylfurfural (HMF), a feedstock molecule. Different catalysts (aluminosilicates, niobic acid, 12-tungstophosphoric acid—HPW, and supported HPW/Niobia) were studied for this reaction in an aqueous medium. The catalysts were characterized by XRD, FT-IR, N2 sorption at −196 °C and pyridine adsorption. It was evident that the nature of the sites (Brønsted and Lewis), strength, quantity and accessibility to the acidic sites are critical to the conversion and yield results. A synergic effect of acidity and mesoporous area are key factors affecting the activity and selectivity of the solid acids. Niobic acid (Nb2O5·nH2O) revealed the best efficiency (highest TON, yield, selectivity and conversion). It was determined that the optimum acidity strength of catalysts should be between 80 to 100 kJ mol−1, with about 0.20 to 0.30 mmol g−1 of acid sites, density about 1 site nm−2 and mesoporous area about 100 m2 g−1. These values fit well within the general order of the observed selectivity (i.e., Nb2O5 > HZSM-5 > 20%HPW/Nb2O5 > SiO2-Al2O3 > HY > HBEA).

Catalytic Reductive Alcohol Etherifications with Carbonyl-Based Compounds or CO2 and Related Transformations for the Synthesis of Ether Derivatives

Ether derivatives have myriad applications in several areas of chemical industry and academia. Hence, the development of more effective and sustainable protocols for their production is highly desired. Among the different methodologies reported for ether synthesis, catalytic reductive alcohol etherifications with carbonyl-based moieties (aldehydes/ketones and carboxylic acid derivatives) have emerged in the last years as a potential tool. These processes constitute appealing routes for the selective production of both symmetrical and asymmetrical ethers (including O-heterocycles) with an increased molecular complexity. Likewise, ester-to-ether catalytic reductions and hydrogenative alcohol etherifications with CO2 to dialkoxymethanes and other acetals, albeit in less extent, have undergone important advances, too. In this Review, an update of the recent progresses in the area of catalytic reductive alcohol etherifications using carbonyl-based compounds and CO2 have been described with a special focus on organic synthetic applications and catalyst design. Complementarily, recent progress made in catalytic acetal/ketal-to-ether or ester-to-ether reductions and other related transformations have been also summarized.

Eugenol, a Promising Building Block for Biobased Polymers with Cutting-Edge Properties

Biobased materials, derived from biomass building blocks, are essential in the pursuit of sustainable materials. Eugenol, a natural phenol obtained from clove oil, but also from lignin depolymerization, possesses a chemical structure that allows its easy modification to obtain a broad and versatile platform of biobased monomers. In this Perspective, an overview of the variety of reactions that have been executed on the allylic double bond, phenol hydroxyl group, aromatic ring, and methoxy group is given, focusing our attention on those to obtain monomers suitable for different polymerization reactions. Furthermore, possible applications and perspectives on the eugenol-derived materials are provided.

Catalytic Transfer Hydrogenolysis of Glycerol over Heterogeneous Catalysts: A Short Review on Mechanistic Studies

Catalytic transfer hydrogenolysis, using liquid H-donors in the absence of pressurized H₂ under mild temperatures, is regarded as the most important technology to substitute traditional hydrogenation processes in industry. Despite decade development with several breakthroughs in catalyst design, the reaction mechanism involved in H₂ generation and subsequent hydrogenolysis reactions is still under debate. In this review, transfer hydrogenolysis of glycerol, as a representative example, on metallic catalysts is revised critically with respect to surface reaction mechanism and catalyst design. The detailed reaction pathways for propanol, methanol, formic acid and ethanol for H₂ generation have been discussed systematically. In particular, reaction mechanism for catalytic C-H cleavage, H spillover/transfer and C-O cleavage reaction steps will be critically revised with experimental and theoretical results in literature. Insights into reaction pathways, mechanism and H₂ transfer efficiency and structure-performance relation for Pd, Cu and Ni catalysts will be provided for future development of catalyst manufacture and process development. The outcome of this work is useful for successful implementation of bio-refinery.

Production of (R)-mandelic acid from styrene, L-phenylalanine, glycerol, or glucose via cascade biotransformations

(R)-mandelic acid is an industrially important chemical, especially used for producing antibiotics. Its chemical synthesis often uses highly toxic cyanide to produce its racemic form, followed by kinetic resolution with 50% maximum yield. Here we report a green and sustainable biocatalytic method for producing (R)-mandelic acid from easily available styrene, biobased L-phenylalanine, and renewable feedstocks such as glycerol and glucose, respectively. An epoxidation-hydrolysis-double oxidation artificial enzyme cascade was developed to produce (R)-mandelic acid at 1.52 g/L from styrene with > 99% ee. Incorporation of deamination and decarboxylation into the above cascade enables direct conversion of L-phenylalanine to (R)-mandelic acid at 913 mg/L and > 99% ee. Expressing the five-enzyme cascade in an L-phenylalanine-overproducing E. coli NST74 strain led to the direct synthesis of (R)-mandelic acid from glycerol or glucose, affording 228 or 152 mg/L product via fermentation. Moreover, coupling of E. coli cells expressing L-phenylalanine biosynthesis pathway with E. coli cells expressing the artificial enzyme cascade enabled the production of 760 or 455 mg/L (R)-mandelic acid from glycerol or glucose. These simple, safe, and green methods show great potential in producing (R)-mandelic acid from renewable feedstocks.

Experimental investigation of the adsorption and desorption of cellulase enzymes on zeolite-β for enzyme recycling applications

The recyclability of cellulase enzymes using zeolite and polyethylene glycol (PEG) was investigated. The cellulase enzymes from cellulose hydrolysate suspensions were adsorbed onto zeolite-β under typical working conditions (pH 5). PEG having a molecular weight of 200 Da and 20 kDa was used as an eluent to desorb the cellulase enzymes from zeolite-β. Adsorption and desorption profiles of cellulase enzymes were studied by varying pH, PEG concentration, and salt concentration. Maximum binding capacity, q_m of the zeolite decreased by increasing the pH, or by introducing PEG. At pH 5, the q_m of the zeolite was determined to be 121 × 10^-3 g/g. About 24%, 51% and 75% of the adsorbed enzyme can be recovered using 1 M NaCl, PEG 200 and PEG 20000, respectively. The specific activity of the recovered enzyme increased by 57% due to the presence of residual PEG.

Solvent-Activated Hafnium-Containing Zeolites Enable Selective and Continuous Glucose-Fructose Isomerisation

The isomerisation of glucose to fructose is a critical step towards manufacturing petroleum-free chemicals from lignocellulosic biomass. Herein we show that Hf-containing zeolites are unique catalysts for this reaction, enabling true thermodynamic equilibrium to be achieved in a single step during intensified continuous operation, which no chemical or biological catalyst has yet been able to achieve. Unprecedented single-pass yields of 58 % are observed at a fructose selectivity of 94 %, and continuous operation for over 100 hours is demonstrated. The unexpected performance of the catalyst is realised following a period of activation within the reactor, during which time interaction with the solvent generates a state of activity that is absent in the synthesised catalyst. Mechanistic studies by X-ray absorption spectroscopy, chemisorption FTIR, operando UV/Vis and ¹ H-¹³ C HSQC NMR spectroscopy indicate that activity arises from isolated Hf^IV atoms with monofunctional acidic properties.

Chemists around the World, Take Your Part in the Circular Economy!

Based on recent examples and initiatives reported in the literature, this concept article discusses how chemistry can contribute to the circular economy approach in order to improve our current and future economical, societal, and environmental system. Through five proposed levels of contribution, chemists can take a significant part in this global approach via the consideration of green chemistry principles, the simplification of syntheses, the limitation of complex products preparation, the efficient utilization of resources but also the novel ways of waste valorization. A more systematic and generalized environmental and economic assessment from the lab-scale is also recommended. At last, chemists have to work even more collaboratively and in a multidisciplinary way, within chemistry and beyond.

Preparation and Uses of Chlorinated Glycerol Derivatives

Crude glycerol (C3H8O3) is a major by-product of biodiesel production from vegetable oils and animal fats. The increased biodiesel production in the last two decades has forced glycerol production up and prices down. However, crude glycerol from biodiesel production is not of adequate purity for industrial uses, including food, cosmetics and pharmaceuticals. The purification process of crude glycerol to reach the quality standards required by industry is expensive and dificult. Novel uses for crude glycerol can reduce the price of biodiesel and make it an economical alternative to diesel. Moreover, novel uses may improve environmental impact, since crude glycerol disposal is expensive and dificult. Glycerol is a versatile molecule with many potential applications in fermentation processes and synthetic chemistry. It serves as a glucose substitute in microbial growth media and as a precursor in the synthesis of a number of commercial intermediates or fine chemicals. Chlorinated derivatives of glycerol are an important class of such chemicals. The main focus of this review is the conversion of glycerol to chlorinated derivatives, such as epichlorohydrin and chlorohydrins, and their further use in the synthesis of additional downstream products. Downstream products include non-cyclic compounds with allyl, nitrile, azide and other functional groups, as well as oxazolidinones and triazoles, which are cyclic compounds derived from ephichlorohydrin and chlorohydrins. The polymers and ionic liquids, which use glycerol as an initial building block, are highlighted, as well.

Optimized Bioproduction of Itaconic and Fumaric Acids Based on Solid-State Fermentation of Lignocellulosic Biomass

The bioproduction of high-value chemicals such as itaconic and fumaric acids (IA and FA, respectively) from renewable resources via solid-state fermentation (SSF) represents an alternative to the current bioprocesses of submerged fermentation using refined sugars. Both acids are excellent platform chemicals with a wide range of applications in different market, such as plastics, coating, or cosmetics. The use of lignocellulosic biomass instead of food resources (starch or grains) in the frame of a sustainable development for IA and FA bioproduction is of prime importance. Filamentous fungi, especially belonging to the Aspergillus genus, have shown a great capacity to produce these organic dicarboxylic acids. This study attempts to develop and optimize the SSF conditions with lignocellulosic biomasses using A. terreus and A. oryzae to produce IA and FA. First, a kinetic study of SSF was performed with non-food resources (wheat bran and corn cobs) and a panel of pH and moisture conditions was studied during fermentation. Next, a new process using an enzymatic cocktail simultaneously with SSF was investigated in order to facilitate the use of the biomass as microbial substrate. Finally, a large-scale fermentation process was developed for SSF using corn cobs with A. oryzae; this specific condition showed the best yield in acid production. The yields achieved were 0.05 mg of IA and 0.16 mg of FA per gram of biomass after 48 h. These values currently represent the highest reported productions for SSF from raw lignocellulosic biomass.

Facile preparation of polycarbonates from bio-based eugenol and 2-methoxy-4-vinylphenol

Polymerization of α,ω-diene functionalized carbonate monomers prepared from bio-based eugenol and 2-methoxy-4-vinylphenol through thiol–ene click and ADMET polymerizations produced polycarbonates with moderate molecular weight satisfactory thermal properties.

NMR Investigation into the Influence of Surface Interactions on Liquid Diffusion in a Mesoporous Catalyst Support

Pulsed field gradient NMR diffusion measurements provide a non-invasive measure of the mass transport (self-diffusion) characteristics of liquids confined to porous catalyst materials. Here we explore the ability of this technique to probe the diffusive behaviour of a series of short-chain primary alcohols within a mesoporous catalyst support material; through the comparison of our results with highly surface-sensitive NMR relaxation data, we show that the evaluation of bulk-pore diffusion dynamics may provide a simple and indirect method to access and explore surface interaction phenomena occurring at the catalyst-liquid interface.

Extraction of Natural Fragrance Ingredients: History Overview and Future Trends

For centuries, perfumes consisted in a combination of natural ingredients, mainly of plant origin. From the 19th century on, the advent of organic synthesis enabled the deployment of multiple synthetic olfactory notes, enriching significantly the perfumers' portfolio. Chemistry is ever since the foundation of modern perfumery. However, sustainable-minded consumers, massively rejecting synthetics for safety and ecological issues, engaged a global return to nature in numerous sectors, and the fragrance industry is not outdone. Sustainable extraction of natural products, making use of innovative technologies, process intensification and agro-based solvents, constitutes the answer to develop eco-conceived fragrant ingredients covering every olfactory family without endangering biodiversity any further. The objective of this review is to draw a clear picture of where those technological advances are today and to assess the ones that may be effectively transposed at the industrial scale tomorrow.

Highly Selective Oxidation of 5-Hydroxymethylfurfural to 5-Hydroxymethyl-2-Furancarboxylic Acid by a Robust Whole-Cell Biocatalyst

Value-added utilization of biomass-derived 5-hydroxymethylfurfural (HMF) to produce useful derivatives is of great interest. In this work, extremely radiation resistant Deinococcus wulumuqiensis R12 was explored for the first time as a new robust biocatalyst for selective oxidation of HMF to 5-hydroxymethylfuroic acid (HMFCA). Its resting cells exhibited excellent catalytic performance in a broad range of pH and temperature values, and extremely high tolerance to HMF and the HMFCA product. An excellent yield of HMFCA (up to 90%) was achieved when the substrate concentration was set to 300 mM under the optimized reaction conditions. In addition, 511 mM of product was obtained within 20 h by employing a fed-batch strategy, affording a productivity of 44 g/L per day. Of significant synthetic interest was the finding that the D. wulumuqiensis R12 cells were able to catalyze the selective oxidation of other structurally diverse aldehydes to their corresponding acids with good yield and high selectivity, indicating broad substrate scope and potential widespread applications in biotechnology and organic chemistry.

Production of 2,3-butanediol from glucose and cassava hydrolysates by metabolically engineered industrial polyploid Saccharomyces cerevisiae

BACKGROUND

2,3-Butanediol (2,3-BDO) is a valuable chemical for industrial applications. Bacteria can produce 2,3-BDO with a high productivity, though most of their classification as pathogens makes them undesirable for the industrial-scale production. Though Saccharomyces cerevisiae (GRAS microorganism) was engineered to produce 2,3-BDO efficiently in the previous studies, their 2,3-BDO productivity, yield, and titer were still uncompetitive compared to those of bacteria production. Thus, we propose an industrial polyploid S. cerevisiae as a host for efficient production of 2,3-BDO with high growth rate, rapid sugar consumption rate, and resistance to harsh conditions. Genetic manipulation tools for polyploid yeast had been limited; therefore, we engineered an industrial polyploid S. cerevisiae strain based on the CRISPR-Cas9 genome-editing system to produce 2,3-BDO instead of ethanol.

RESULTS

Endogenous genes coding for pyruvate decarboxylase and alcohol dehydrogenase were partially disrupted to prevent declined growth rate and C₂-compound limitation. A bacterial 2,3-BDO-producing pathway was also introduced in engineered polyploid S. cerevisiae. A fatal redox imbalance was controlled through the heterologous NADH oxidase from Lactococcus lactis during the 2,3-BDO production. The resulting strain (YG01_SDBN) still retained the beneficial traits as polyploid strains for the large-scale fermentation. The combination of partially disrupted PDC (pyruvate decarboxylase) and ADH (alcohol dehydrogenase) did not cause the severe growth defects typically found in all pdc- or adh-deficient yeast. The YG01_SDBN strain produced 178 g/L of 2,3-BDO from glucose with an impressive productivity (2.64 g/L h). When a cassava hydrolysate was used as a sole carbon source, this strain produced 132 g/L of 2,3-BDO with a productivity of 1.92 g/L h.

CONCLUSIONS

The microbial production of 2,3-BDO has been limited to bacteria and haploid laboratorial S. cerevisiae strains. This study suggests that an industrial polyploid S. cerevisiae (YG01_SDBN) can produce high concentration of 2,3-BDO with various advantages. Integration of metabolic engineering of the industrial yeast at the gene level with optimization of fed-batch fermentation at the process scale resulted in a remarkable achievement of 2,3-BDO production at 178 g/L of 2,3-BDO concentration and 2.64 g/L h of productivity. Furthermore, this strain could make a bioconversion of a cassava hydrolysate to 2,3-BDO with economic and environmental benefits. The engineered industrial polyploid strain could be applicable to production of biofuels and biochemicals in large-scale fermentations particularly when using modified CRISPR-Cas9 tools.

On the thermal behavior of protein isolated from different legumes investigated by DSC and TGA

BACKGROUND

Pea, lentil, faba bean, chickpea and bean proteins are potentially renewable raw materials for bioplastic production that can be obtained from agricultural waste. Plastics are usually processed under heating, and thus thermal stability is a mandatory requirement for the application. In this study, the thermal behavior of several legume protein isolates at different purity degrees was investigated.

RESULTS

The thermal stability of proteins extracted from legumes was maximum for chickpeas and minimum for beans and decreased with decreasing protein purity in the range 30-88%. A similar dependence on purity was observed for the glass transition temperature. On the contrary, the denaturation temperature was found not to depend on sample purity and origin and was lower than the degradation temperature only in the case of protein samples with purity higher than 60%.

CONCLUSION

Proteins from legumes are suitable to produce thermoplastic biopolymeric materials if isolated at purity higher than 60%. In fact, under this circumstance, they can be denaturized without degrading and thus are suitable for extrusion processing. © 2018 Society of Chemical Industry.

Study of Short-Chain Alcohol and Alcohol-Water Adsorption in MEL and MFI Zeolites

In this paper, we present a comparative study of the adsorption behavior of short chain alcohols (pure and in aqueous solution) into silicalite-1 (MFI-type zeolite) and silicalite-2 (MEL-type zeolite). For quite some time, silicalite-1 has been the reference material to address the problem of adsorptive-based separation, mostly for hydrocarbon mixtures. Interestingly, being structurally close to silicalite-1, adsorption studies using silicalite-2 are scarce and to the best of our knowledge, a comparative study of their behavior for alcohol-water mixtures has not been published to date. We have here resorted to molecular simulation techniques to analyze the adsorption and diffusion phenomena in both zeolites at 25 and 50 °C for pure methanol, ethanol, 1-butanol, and water, and for some relevant compositions of alcohol/water mixtures. In addition to the dilute regime in the mixture, our study ranges from intermediate alcohol concentrations to alcohol-rich phases, relevant to alcohol purification processes. Besides, we have performed volumetric and calorimetric measurements of single-component adsorption of alcohols in pure silica MEL zeolite, which were used to validate the model potentials used in the simulations. We observe that the zigzag channels of MFI zeolite are most likely responsible for its somewhat higher affinity for alcohols. This leads to higher adsorption selectivities when compared to those of MEL zeolite. We have also found that the choice of water model strongly conditions water coadsorption into the zeolites and subsequently the predictions of the adsorbent's selectivity in alcohol/water systems. Despite considerable differences for adsorbed pure components, diffusivities of alcohol and water adsorbed from mixtures are relatively similar, as a consequence of the strong hydrogen bonds between hydroxyl groups and water.

Direct Correlation between Adsorption Energetics and Nuclear Spin Relaxation in a Liquid-saturated Catalyst Material

The ratio of NMR relaxation time constants <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"> <mml:mrow><mml:msub><mml:mi>T</mml:mi> <mml:mn>1</mml:mn></mml:msub> <mml:mo>/</mml:mo> <mml:msub><mml:mi>T</mml:mi> <mml:mn>2</mml:mn></mml:msub> </mml:mrow> </mml:math> provides a non-destructive indication of the relative surface affinities exhibited by adsorbates within liquid-saturated mesoporous catalysts. In the present work we provide supporting evidence for the existence of a quantitative relationship between such measurements and adsorption energetics. As a prototypical example with relevance to green chemical processes we examine and contrast the relaxation characteristics of primary alcohols and cyclohexane within an industrial silica catalyst support. <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"> <mml:mrow><mml:msub><mml:mi>T</mml:mi> <mml:mn>1</mml:mn></mml:msub> <mml:mo>/</mml:mo> <mml:msub><mml:mi>T</mml:mi> <mml:mn>2</mml:mn></mml:msub> </mml:mrow> </mml:math> values obtained at intermediate magnetic field strength are in good agreement with DFT adsorption energy calculations performed on single molecules interacting with an idealised silica surface. Our results demonstrate the remarkable ability of this metric to quantify surface affinities within systems of relevance to liquid-phase heterogeneous catalysis, and highlight NMR relaxation as a powerful method for the determination of adsorption phenomena within mesoporous solids.

Sensor-Based Real-Time Detection in Vulcanization Control Using Machine Learning and Pattern Clustering

Recent paradigm shifts in manufacturing have resulted from the need for a smart manufacturing environment. In this study, we developed a model to detect anomalous signs in advance and embedded it in an existing programmable logic controller system. For this, we investigated the innovation process for smart manufacturing in the domain of synthetic rubber and its vulcanization process, as well as a real-time sensing technology. The results indicate that only analysis of the pattern of input variables can lead to significant results without the generation of target variables through manual testing of chemical properties. We have also made a practical contribution to the realization of a smart manufacturing environment by building cloud-based infrastructure and models for the pre-detection of defects.

Nb-Based Zeolites: Efficient bi-Functional Catalysts for the One-Pot Synthesis of Succinic Acid from Glucose

The one-pot production of succinic acid from glucose was investigated in pure hot water as solvent using Nb (0.02 and 0.05 moles%)-Beta zeolites obtained by a post-synthesis methodology. Structurally, they are comprised of residual framework Al-acid sites, extra-framework isolated Nb (V) and Nb₂O₅ pore-encapsulated clusters. The Nb-modified Beta-zeolites acted as bi-functional catalysts in which glucose is dehydrated to levulinic acid (LA) which, further, suffers an oxidation process to succinic acid (SA). After the optimization of the reaction conditions, that is, at 180 °C, 18 bar O₂, and 12 h reaction time, the oxidation of glucose occurred with a selectivity to succinic acid as high as 84% for a total conversion.