Cyclopentadithiophene bridged donor-acceptor dyes achieve high power conversion efficiencies in dye-sensitized solar cells based on the tris-cobalt bipyridine redox couple

Open-Cage Copper Complexes Modulate Coordination and Charge Transfer

This study presents a novel copper-based redox shuttle that employs the PY5 pentadentate polypyridyl ligand in a dye-sensitized solar cell (DSSC). The [Cu(PY5)]2+ complex exhibits a unique five-coordinate square pyramidal geometry, characterized by a strategically labile axial position, to facilitate efficient dye regeneration while minimizing electron recombination, thereby enhancing DSSC performance. Notably, the inclusion of 4-tert-butylpyridine (TBP) as an additive is shown to significantly modulate the electrochemical and photophysical properties of the copper complexes, attributed to its coordination to the vacant axial site. This interaction leads to an improved open-circuit voltage and overall device efficiency, with the complexes achieving promising efficiencies under standard solar irradiance. The findings underscore the potential of utilizing copper-based redox shuttles with designed ligand geometries to overcome the limitations of current DSSC materials, opening new avenues for the design and optimization of solar energy conversion devices. This work not only contributes to the fundamental understanding of the behavior of copper complexes in DSSCs but also paves the way for future research aimed at exploiting the full potential of such geometrical and electronic configurations for the development of more robust and efficient solar energy solutions.

Push-pull photochromic dyes for semi-transparent solar cells with light-adjustable optical properties and high color-rendering index

We report the design, synthesis and characterization of push-pull photochromic naphthopyran dyes, incorporating different carbazole moieties as the electron-donor group for use in dye-sensitized solar cells. Compared to a reference dye incorporating a diphenylamine-type donor moiety, the introduction of functionalized carbazoles allows for a hypsochromic shift of the absorption of the coloured isomers of the dyes in the visible region and a better tuning of their spectra to the photopic response of the human eye. Under illumination, the molecules exhibit a broad absorption with a maximum comprised between 546 nm and 571 nm in solution and they reveal relatively fast discoloration kinetics. By using these dyes to fabricate photochromic solar cells whose optical and photovoltaic properties vary with the light exposure, we have achieved a PCE of up to 3% in opaque cells. Using these molecules in semi-transparent solar cells with different electrolytes, a PCE of 2.3% was achieved. We also produced a semi-transparent mini-module with an average visible transmittance varying between 66% and 50% and a colour rendering index around 95 in both the uncoloured and coloured states.

Fused Double Donor Design with a Cross-Conjugated Dibenzosilin for Dye-Sensitized Solar Cells

Dye-sensitized solar cells (DSCs) can provide a clean energy solution to growing energy demands. In order to have devices of high performance, sensitizers that are able to absorb in the near-infrared region (NIR) are needed. Stronger electron donors are needed for intramolecular charge-transfer sensitizers to access longer wavelength photons. Thus, two novel organic dyes with a cross-conjugated dibenzosilin double donor design are studied herein. The double donor delocalizes multiple filled orbitals across both amine donors due to the fused design that planarizes the donor as observed computationally, which improves intramolecular charge-transfer strength. The dyes are studied via density functional theory (DFT), optical spectroscopy, electrochemistry, and in DSC devices. The studies indicate that the dye design can reduce recombination losses, allowing for improved DSC device performances relative to a single arylamine donor. The reduction in recombination losses is attributed to the six alkyl chains that are incorporated into the donor, which offer good surface protection.

Influence of Redox Couple on the Performance of ZnO Dye Solar Cells and Minimodules with Benzothiadiazole-Based Photosensitizers

ZnO-based dye-sensitized solar cells exhibit lower efficiencies than TiO2-based systems despite advantageous charge transport dynamics and versatility in terms of synthesis methods, which can be primarily ascribed to compatibility issues of ZnO with the dyes and the redox couples originally optimized for TiO2. We evaluate the performance of solar cells based on ZnO nanomaterial prepared by microwave-assisted solvothermal synthesis, using three fully organic benzothiadiazole-based dyes YKP-88, YKP-137, and MG-207, and alternative electrolyte solutions with the I-/I3 -, Co(bpy)3 2+/3+, and Cu(dmp)2 1+/2+ redox couples. The best cell performance is achieved for the dye-redox couple combination YKP-88 and Co(bpy)3 2+/3+, reaching an average efficiency of 4.7% and 5.0% for the best cell, compared to 3.7% and 3.9% for the I-/I3 - couple with the same dye. Electrical impedance spectroscopy highlights the influence of dye and redox couple chemistry on the balance of recombination and regeneration kinetics. Combined with the effects of the interaction of the redox couple with the ZnO surface, these aspects are shown to determine the solar cell performance. Minimodules based on the best systems in both parallel and series configurations reach 1.5% efficiency for an area of 23.8 cm2.

Electrodeposited PPy@TiO2 and PEDOT@TiO2 Counter Electrodes for [Co(bpy)3]2+/3+ Redox Mediator-Based Dye-Sensitized Solar Cells

The main goal of this work is to enhance the catalytic performance of PPy and PEDOT films toward the Co2+/Co3+ redox couple. PPy and PEDOT films were electrodeposited separately on a porous TiO2 template to assess their suitability as alternative catalysts in dye-sensitized solar cells (DSSC) based on the [Co(bpy)3]2+/3+ redox shuttle. The obtained PPy@TiO2 and PEDOT@TiO2 counter electrodes displayed much rougher surfaces. Electrochemical studies indicate the superior catalytic activity of both the electrodeposited electrodes toward Co3+ reduction, as indicated by lower charge transfer resistance than that of pristine films and even that of Pt electrodes. Therefore, the fabricated DSSC devices with these counter electrodes achieved higher power conversion efficiencies compared to cells with pristine PPy and PEDOT counter electrodes, or even with a Pt counter electrode. Interestingly, the assembled DSSC device with a PEDOT@TiO2 counter electrode displayed the highest performance among all with a power conversion efficiency of 6.62%, which is better than that obtained by the device with a Pt electrode (6.07%).

Synthetic Efforts to Investigate the Effect of Planarizing the Triarylamine Geometry in Dyes for Dye-Sensitized Solar Cells

The geometry of a dye for dye-sensitized solar cells (DSSCs) has a major impact on its optical and electronic properties. The dye structure also dictates the packing properties and how well the dye insulates the metal-oxide surface from oxidants in the electrolyte. The aim of this work is to investigate the effect of planarizing the geometry of the common triarylamine donor, frequently used in dyes for DSSC. Five novel dyes were designed and prepared; two employ conventional triarylamine donors with thiophene and furan π-spacers, two dyes have had their donors planarized through one sulfur bridge (making two distinct phenothiazine motifs), and the final dye has been planarized by forming a double phenoxazine. The synthesis of these model dyes proved to be quite challenging, and each required specially designed total syntheses. We demonstrate that the planarization of the triarylamine donor can have different effects. When planarization was achieved by a 3,7-phenothiazine and double phenoxazine structures, improved absorption properties were noted, and a panchromatic absorption was achieved by the latter. However, an incorrect linking of donor and acceptor moieties has the opposite effect. Further, electrochemical impedance spectroscopy revealed clear differences in charge recombination depending on the structure of the dye. A drawback of planarized dyes in relation to DSSC is their low oxidation potentials. The best photovoltaic performance was achieved by 3,7-phenothazine with furan as a π-spacer, which produces a power conversion efficiency of 5.2% (J _sc = 8.8 mA cm^-2, V _oc = 838 mV, FF = 0.70).

Stable Cobalt-Mediated Monolithic Dye-Sensitized Solar Cells by Full Glass Encapsulation

Dye-sensitized solar cells (DSSCs) emerged in the market as one of the most promising indoor photovoltaic technologies to address the need for wireless powering of low-consuming electronics and sensor nodes of the internet of things (IoT). The monolithic design structure of the cell (M-DSSCs) makes the devices simpler and cheaper, and it is straightforward for constructing in-series modules. The most efficient DSSCs reported so far are Co(III/II)-mediated liquid junction cells with acetonitrile electrolytes; however, they are mostly unstable. This study reports on highly stable cobalt-mediated M-DSSCs, passing thermal cycling tests up to 85 °C according to ISOS standard protocols. Under 1000 h of aging in the dark and under simulated solar and artificial light soaking, all tested cells improved or retained their initial power conversion efficiency. Advanced long-term stability was achieved by eliminating the extrinsic factors of degradation, such as the interaction of the cell components with the environment and electrolyte leakage. This was obtained by encapsulation of the devices using a glass-frit sealant, including the holes for filling up the liquid components of the cells. The hermeticity of the encapsulation complies with the MIL-STD-883 standard fine helium gas leakage test, and its hermeticity remained unchanged after humidity-freeze cycles according to IEC 61646. The elimination of extrinsic degradation factors allowed reliable assessment of inner factors accountable for aging. The impact of the ISOS-protocol test conditions on the intrinsic device stability and long-term photovoltaic history of the M-DSSCs is discussed.

Dye-sensitized solar cells strike back

Dye-sensitized solar cells (DSCs) are celebrating their 30th birthday and they are attracting a wealth of research efforts aimed at unleashing their full potential. In recent years, DSCs and dye-sensitized photoelectrochemical cells (DSPECs) have experienced a renaissance as the best technology for several niche applications that take advantage of DSCs' unique combination of properties: at low cost, they are composed of non-toxic materials, are colorful, transparent, and very efficient in low light conditions. This review summarizes the advancements in the field over the last decade, encompassing all aspects of the DSC technology: theoretical studies, characterization techniques, materials, applications as solar cells and as drivers for the synthesis of solar fuels, and commercialization efforts from various companies.

Self-Assembled Materials Incorporating Functional Porphyrins and Carbon Nanoplatforms as Building Blocks for Photovoltaic Energy Applications

As a primary goal, this review highlights the role of supramolecular interactions in the assembly of new sustainable materials incorporating functional porphyrins and carbon nanoplatforms as building blocks for photovoltaics advancements.

All-experimental analysis of doubly resonant sum-frequency generation spectra: Application to aggregated rhodamine films

A new method is proposed to analyze Doubly Resonant infrared-visible Sum-Frequency Generation (DR-SFG) spectra. Based on the transform technique, this approach is free from assumptions about vibronic modes, energies, or line widths and accurately captures through the overlap spectral function all required aspects of the vibronic structure from simple experimental linear absorption spectra. Details and implementation of the method are provided along with three examples treating rhodamine thin films about one monolayer thick. The technique leads to a perfect agreement between experiment and simulations of the visible DR-SFG line shapes, even in the case of complex intermolecular interactions resulting from J-aggregated chromophores in heterogeneous films. For films with mixed H- and J-aggregates, separation of their responses shows that the J-aggregate DR-SFG response is dominant. Our analysis also accounts for the unexplained results published in the early times of DR-SFG experiments.

On the Use of PEDOT as a Catalytic Counter Electrode Material in Dye-Sensitized Solar Cells

Dye-sensitized solar cells (DSSCs) emerged in the early 1990s as a promising alternative to the classic silicon-based solar cell due to their unique combination of low cost, ease of fabrication, color palette for building integration, and high efficiency in indoor applications. This review article describes the fabrication and the properties of poly (3,4-ethylenedioxythiophene) (PEDOT)-based catalytic counter electrodes (CEs) for DSSCs. In particular, the electrochemical reactivity PEDOT CEs used in conjunction with alternative redox mediators for DSSCs is outlined. Among alternative redox shuttles, cobalt and copper complexes, as well as totally organic thiolate/disulfide, have been considered. Finally, PEDOT can also be used as a hole conductor material in electrolyte-free solid-state dye-sensitized solar cells. This review clearly shows that the progress in DSSCs development is strongly linked to the introduction of PEDOT as a new counter electrode material.

Supramolecular strategies in artificial photosynthesis

Artificial photosynthesis is a major scientific endeavor aimed at converting solar power into a chemical fuel as a viable approach to sustainable energy production and storage. Photosynthesis requires three fundamental actions performed in order; light harvesting, charge-separation and redox catalysis. These actions span different timescales and require the integration of functional architectures developed in different fields of study. The development of artificial photosynthetic devices is therefore inherently complex and requires an interdisciplinary approach. Supramolecular chemistry has evolved to a mature scientific field in which programmed molecular components form larger functional structures by self-assembly processes. Supramolecular chemistry could provide important tools in preparing, integrating and optimizing artificial photosynthetic devices as it allows precise control over molecular components within such a device. This is illustrated in this perspective by discussing state-of-the-art devices and the current limiting factors - such as recombination and low stability of reactive intermediates - and providing exemplary supramolecular approaches to alleviate some of those problems. Inspiring supramolecular solutions such as those discussed herein will incite expansion of the supramolecular toolbox, which eventually may be needed for the development of applied artificial photosynthesis.

Ferrocene Derivatives Functionalized with Donor/Acceptor (Hetero)Aromatic Substituents: Tuning of Redox Properties

A series of functionalized ferrocene derivatives carrying electron-donor and electron-withdrawing (hetero)aromatic substituents has been designed as potential alternative electrolyte redox couples for dye-sensitized solar cells (DSSC). The compounds have been synthesized and fully characterized in their optical and electrochemical properties. A general synthetic approach that implies the use of a microwave assisted Suzuki coupling has been developed to access a significative number of compounds. The presence of different electron-rich and electron-poor substituents provided fine tuning of optical properties and energy levels. HOMO and LUMO energy values showed that the substitution of one or two cyclopentadienyl rings of ferrocene can be successfully exploited to increase the maximum attainable voltage from a standard DSSC device using TiO2 as a semiconductor, opening the way to highly efficient, non-toxic, and cheap redox shuttles to be employed in solar energy technologies.

The Hagfeldt Donor and Use of Next-Generation Bulky Donor Designs in Dye-Sensitized Solar Cells

"The Hagfeldt donor" is a bulky triarylamine building block with four alkyl chains in a 3-dimensional arrangement that is used with organic dyes in dye-sensitized solar cells (DSCs) in over 140 publications. Many of the highest performing DSC devices in literature make use of this group due to exceptional TiO₂ surface protection properties, which slows recombination of electrons in TiO₂ with the electrolyte. Importantly, record-setting cobalt and copper redox shuttle-based DSCs require exceptional surface protection to slow a facile recombination of electrons to these positively charged redox shuttles. Several syntheses have emerged for the Hagfeldt donor due to the need for iterative aryl-halide cross- coupling reactions complicating a straightforward route. Six synthetic strategies found in literature are described along with the challenges of each route. A recent method that has been put forward in the literature as a scalable, regioisomerically pure route is highlighted.

Aromaticity-Photovoltaic Property Relationship of Triphenylamine-Based D-π-A Dyes: Leads from DFT Calculations

D-π-A-based dyes find a wide range of applications in molecular electronics and photovoltaics in general and dye-sensitized solar cells (DSSC) in particular. We speculated whether there exists a relationship between the degree of aromaticity of the π-spacers used in the D-π-A type dyes and their structural, electronic, energetic, photophysical, and intramolecular charge transfer properties. Triphenylamine (TPA) and cyanoacrylic acid (CAA) have been chosen as the donor and acceptor, respectively. In order to carry out the investigation systematically the π-spacers have been logically chosen based on their experimental resonance energies, which follows the order, furan < pyrrole < thiophene < pyridine < benzene. All the properties have been discussed based on the degree of aromaticity of the π-spacers. Geometric properties such as dihedral angles and bond lengths have been discussed extensively. Energy levels of the frontier molecular orbitals, electrochemical properties, namely, ground and excited state oxidation potentials (GSOP/ESOP), and change in Gibbs free energy for electron injection and regeneration (ΔG_inj/ΔG_reg) have also been evaluated. Photophysical properties like wavelength of maximum absorption (λ_max), oscillator strength (f), light harvesting efficiency (LHE), and intramolecular charge transfer properties, viz., charge transfer distance (D_CT), fraction of charge transferred (q_CT), and change in dipole moment (μ_CT) have been assessed. The adsorption characteristics of dye with (TiO₂)₉ nanocluster have been studied along with their optical properties. Results reveal that the nature of the relationship between the aforementioned properties and the extent of aromaticity of the π-spacers is inherently multifaceted. It thus turns out that it is highly difficult to quantify the relationship. These properties of D-π₁-π₂-A molecules can be regarded to be arising from two groups, namely, π-spacers with lower and higher resonance energies. This results in a natural trade-off in selection of competing properties. The qualitative aromaticity photovoltaic property relationship thus obtained may serve as a guide to tailor-design various properties of D-π-A type dyes for application in the intramolecular charge transfer devices.

A Blue Photosensitizer Realizing Efficient and Stable Green Solar Cells via Color Tuning by the Electrolyte

Semitransparent dye-sensitized solar cells (DSCs) are appealing as aesthetically pleasing and colorful see-through photovoltaics. Green semitransparent DSCs have been presented, but the best ones rely on green zinc porphyrin photosensitizers and high volatile electrolytes. For potential outdoor applications, the zinc porphyrin DSCs employing ionic liquid electrolytes merely reached a power conversion efficiency (PCE) of 6.3% even with opaque mesoporous TiO₂ films. Herein, the new green DSC is realized by using a blue organic photosensitizer in conjunction with an orange ionic-liquid-based electrolyte, presenting a simple and an effective path for color tuning of photovoltaics. The new approach allows for broadly modulating the color from spring green to cyan by tuning the contributions of the light absorption by the dye-sensitized TiO₂ film and the electrolyte layer. The new semitransparent DSCs with spring green to cyan colors have PCEs ranging from 6.7% to 8.1% and show stability for 1000 h under accelerated ageing test at 80 °C, superior to the zinc porphyrin DSCs. The findings pave a new way to achieve efficient and stable colorful solar cells.

Robust, Scalable Synthesis of the Bulky Hagfeldt Donor for Dye-Sensitized Solar Cells

The bulky triarylamine group commonly referred to as the "Hagfeldt donor" is a key building block found in many of the organic dyes used in dye-sensitized applications such as dye-sensitized solar cells (DSCs). This building block has gained popularity owing to its presence in many of the best-performing DSC devices reported to date, which use dyes containing this donor group. The Hagfeldt donor provides a desirable 3-dimensional structure that aids in surface protection of electrons injected into the semiconductor from oxidants in the electrolyte, allowing for record-setting cobalt- and copper-based redox shuttles to be utilized more frequently. However, the synthesis of this molecule has proven unreliable for many routes. This study concerns a novel, reliable and scalable five-step synthesis of the Hagfeldt donor.

Copper-based redox shuttles supported by preorganized tetradentate ligands for dye-sensitized solar cells

Three copper redox shuttles ([Cu(1)]2+/1+, [Cu(2)]2+/1+, and [Cu(3)]2+/1+) featuring tetradentate ligands were synthesized and evaluated computationally, electrochemically, and in dye-sensitized solar cell (DSC) devices using a benchmark organic dye, Y123. Neutral polyaromatic ligands with limited flexibility were targeted as a strategy to improve solar-to-electrical energy conversion by reducing voltage losses associated with redox shuttle electron transfer events. Inner-sphere electron transfer reorganization energies (λ) were computed quantum chemically and compared to the commonly used [Co(bpy)3]3+/2+ redox shuttle which has a reported λ value of 0.61 eV. The geometrically constrained biphenyl-based Cu redox shuttles investigated here have lower reorganization energies (0.34-0.53 eV) and thus can potentially operate with lower driving forces for dye regeneration (ΔGreg) in DSC devices when compared to [Co(bpy)3]3+/2+-based devices. The rigid tetradentate ligand design promotes more efficient electron transfer reactions leading to an improved JSC (14.1 mA cm-2), higher stability due to the chelate effect, and a decrease in VlossOC for one of the copper redox shuttle-based devices.

Precious metal-free solar-to-fuel generation: SSM-DSCs powering water splitting with NanoCOT and NiMoZn electrocatalysts

A precious metal-free sequential series multijunction dye-sensitized solar cell (SSM-DSC)-powered water electrolysis system is demonstrated using NanoCOT and NiMoZn electrodes.

Hydroxytricyanoborate Anion: Synthetic Aspects and Structural, Chemical, and Spectroscopic Properties

In recent years, salts of the hydridotricyanoborate anion [BH(CN)₃]^- (MHB) have become readily available. In spite of the unusually high stability of the MHB anion, it can be used as a valuable starting material for the preparation of selected tricyanoborates, for example, the boron-centered nucleophile B(CN)₃^2-. A further unprecedented example is the hydroxytricyanoborate anion [B(OH)(CN)₃]^- that is accessible by oxidation of (H₃O)MHB with elemental bromine in water. The Brønsted acid (H₃O)[B(OH)(CN)₃] was isolated as a crystalline solid. It serves as a versatile starting material for the synthesis of coordination compounds, metal salts, and ionic liquids. The [B(OH)(CN)₃]^- anion shows a rich coordination chemistry and a high tendency to form hydrogen-bonded motifs as demonstrated by a series of salts with different types of cations. Furthermore, the [B(OH)(CN)₃]^- anion itself serves as starting material for new tricyanoborates such as the unusual trianion [B{OB(CN)₃}₃]^3- and the silylated anions [B(OSiR₃)(CN)₃]^- (R = Me, Et, Ph). Some of these follow-up products have been characterized by single-crystal X-ray diffraction, e.g., [nBu₄N]₃[B{OB(CN)₃}₃] and [nBu₄N][B(OSiPh₃)(CN)₃].

Effect of Ligand Structures of Copper Redox Shuttles on Photovoltaic Performance of Dye-Sensitized Solar Cells

In recent years, copper(I/II) complexes have emerged as alternative redox shuttles in dye-sensitized solar cells (DSSCs), exhibiting more positive redox potential than iodine- and cobalt-based redox shuttles. In particular, copper(I/II) complexes with 1,10-phenanthroline- or 2,2'-bipyridyl-based ligands attained moderate to high power conversion efficiencies (6-11%) with a high open-circuit voltage (V_OC) over 1.0 V due to the positive potentials. Although copper(I/II) complexes with 1,10-phenanthroline-based ligands with 2,9-substituents have been developed, the effect of their ligand structures on the photovoltaic performance of DSSCs have not been fully addressed due to limited synthetic access to 1,10-phenanthroline derivatives. In this study, we designed and synthesized a series of copper(I/II) complexes with 1,10-phenanthroline ligands with different substituents at the 2,9-positions: bis(2-n-butyl-1,10-phenanthroline)copper(I/II) ([Cu(bp)₂]^1+/2+), bis(2-ethyl-9-methyl-1,10-phenanthroline)copper(I/II) ([Cu(emp)₂]^1+/2+), bis(2,9-diethyl-1,10-phenanthroline)copper(I/II) ([Cu(dep)₂]^1+/2+), and bis(2,9-diphenyl-1,10-phenanthroline)copper(I/II) ([Cu(dpp)₂]^1+/2+). The more positive redox potentials of [Cu(emp)₂]^1+/2+ and [Cu(dep)₂]^1+/2+, compared to that of bis(2,9-dimethyl-1,10-phenanthroline)copper(I/II) ([Cu(dmp)₂]^1+/2+), originate from the larger steric hindrance of the ethyl group instead of the methyl group, whereas the redox potential of [Cu(bp)₂]^1+/2+ is significantly shifted to the negative direction because of the lower steric hindrance of the 2-monosubstituted 1,10-phenanthroline ligands. The efficiency of the DSSC with [Cu(bp)₂]^1+/2+ (5.90%) is almost comparable to the DSSC with [Cu(dmp)₂]^1+/2+ (6.29%). In contrast, the DSSCs with [Cu(emp)₂]^1+/2+ (3.25%), [Cu(dep)₂]^1+/2+ (2.56%), and [Cu(dpp)₂]^1+/2+ (2.21%) exhibited lower efficiencies than those with [Cu(dmp)₂]^1+/2+ and [Cu(bp)₂]^1+/2+. The difference can be rationalized by the electron collection efficiencies. Considering the similar photovoltaic properties of the DSSCs with [Cu(bp)₂]^1+/2+ and [Cu(dmp)₂]^1+/2+, the use of copper(I/II) complexes with 2-monosubstituted 1,10-phenanthroline ligands as the redox shuttle may be useful to improve the short-circuit current density while retaining the rather high V_OC value when dyes with a smaller bandgap (i.e., better light harvesting) are developed.

p-Type dye-sensitized solar cells based on pseudorotaxane mediated charge-transfer

The efficiency of p-type dye-sensitized solar cells (DSSCs) remains low compared to that of n-type congeners due to charge recombination events. We report a supramolecular approach to reduce recombination at the NiO-dye interface, realized by using the cyclophane cyclobis(paraquat-p-phenylene) ring (RING4+/RING3˙+) as a redox mediator and a dye (PN) functionalized with a 1,5-dioxynaphthalene (DNP) recognition site, promoting the supramolecular formation of a pseudorotaxane capable of directing charge transfer away from the NiO-dye interface. The binding affinity of RING4+ to PN is high (Kass = 3.4 × 104 M-1), with quenching of the photoexcited dye (PN*) ascribed to reduction of RING4+ to RING3˙+. The reduced RING3˙+ exhibits a lower binding affinity to PN, facilitating exchange with the excess RING4+ present in solution. This supramolecular phenomenon was implemented into p-type DSSCs by anchoring the PN dye on a NiO photocathode in conjunction with the RING4+/RING3˙+ redox couple, yielding a 10 fold enhancement in the short-circuit photocurrent (JSC) compared to control devices utilizing P1 dye or the methylviologen (MV2+/MV˙+) redox couple that cannot form pseudorotaxanes.

Metal Coordination Complexes as Redox Mediators in Regenerative Dye-Sensitized Solar Cells

Dye-sensitized solar cells (DSSCs) have attracted a substantial interest in the last 30 years for the conversion of solar power to electricity. An important component is the redox mediator effecting the transport of charge between the photoelectrode and the dark counter electrode (CE). Among the possible mediators, metal coordination complexes play a prominent role and at present are incorporated in several types of devices with a power conversion efficiency exceeding 10%. The present review, after a brief introduction to the operation of DSSCs, discusses at first the requirements for a successful mediator. Subsequently, the properties of various classes of inorganic coordination complexes functioning as mediators relevant to DSSC operation are presented and the operational characteristics of DSSC devices analyzed. Particular emphasis is paid to the two main classes of efficient redox mediators, the coordination complexes of cobalt and copper; however other less efficient but promising classes of mediators, notably complexes of iron, nickel, manganese and vanadium, are also presented.

Importance of Compact Blocking Layers to the Performance of Dye-Sensitized Solar Cells under Ambient Light Conditions

Power generation in indoor environments is the next step in dye-sensitized solar cell (DSSC) evolution. To achieve this goal, a critical recombination route which is usually inhibited by the TiCl₄-derived blocking layers (BLs), that is, charge transfer at the fluorine-doped tin oxide substrate/electrolyte interface, is of concern. In this study, we demonstrate that because of low surface coverage, the conventional TiCl₄ BLs are unable to suppress such electron leakage, thus limiting the photovoltaic performance of Co(bpy)₃^2+/3+-mediated DSSCs (bpy = 2,2'-bipyridine) under ambient lighting. On the other hand, by introducing compact BLs prepared by spray pyrolysis, the DSSCs show lower dark current and operate efficiently not only under high-intensity sunlight but also under ambient light conditions. The better blocking function of the compact BL is verified by the cyclic voltammetry; other thin-film preparation methods, except for the common TiCl₄ treatment, are anticipated to realize a similar blocking effect. This study illustrates that dense thin film with a predominant blocking function is highly required as the BL for DSSCs under low-light conditions, and this concept will pave the way for more development of indoor DSSCs.

Research Progress on Photosensitizers for DSSC

Dye sensitized solar cells (DSSC) are considered one of the most promising photovoltaic technologies as an alternative to traditional silicon-based solar cells, for their compatibility with low-cost production methods, their peculiar optical and mechanical properties and the high indoor efficiency. Photosensitizers represent one of the most important components of a DSSC device and probably the most thoroughly investigated in the last twenty years, with thousands of dyes that have been proposed and tested for this kind of application. In this review we aimed to provide an overview of the three main classes of DSSC photosensitizers, namely ruthenium(II) polypyridyl complexes, Zn-porphyrin derivatives and metal-free organic dyes. After a brief introduction about the architecture and operational principles of a DSSC and the state of the art of the other main components of this type of device, we focused our discussion on photosensitizers. We have defined the numerous requirements DSSC photosensitizers should satisfy and have provided an overview of their historical development over the years; by examining specific dyes reported in the literature, we attempted to highlight the molecular design strategies that have been established for the optimization of their performance in real devices both in terms of efficiency (which recently reaches an outstanding 14.3%) and operational stability. Finally, we discussed, in the last section, the possible future developments of this intriguing technology.

Efficiency-limiting processes in cyclopentadithiophene-bridged donor-acceptor-type dyes for solid-state dye-sensitized solar cells

The charge generation and recombination processes in three novel push-pull photosensitizers for dye-sensitized solar cells (DSSCs) are studied by ps-μs transient absorption (TA) and quasi-steady-state photoinduced absorption (PIA) spectroscopy. The three cyclopentadithiophene-based photosensitizer dye molecules exhibit comparably low power conversion efficiencies ranging from 0.8% to 1.7% in solid-state DSSCs. We find that the photocurrents increase in the presence of Li-salt additives. Both TA and PIA measurements observe long-lived dye cations created by electron injection from the dyes' excited state for two dyes from the series. However, the third dye shows significantly lower performance as a consequence of the less efficient electron injection even after the addition of Li-salts and faster electron-hole recombination on the ns-μs time scale. In essence, the prerequisites for this class of donor-π bridge-acceptor photosensitizers to reach higher charge generation efficiencies are a combination of strong dipole moments and fine tuning of the electronic landscape at the titania-dye interface by Li-salt addition.

Theoretical study on electronic and absorption characters of p-type D-A-π-A triaryamine sensitizer

The structural and electronic properties of well-known 4,4′-(4-(5-(2,2-dicyanovinyl)thiophen-2-yl)phenylazanediyl)dibenzoic acid (O2) and its hypothetical dyes O3–O7 were investigated by computational techniques. The absorption properties were probed. By replacing the 2-methylidenepropanedinitrile acceptor with 1,3-diethyl-5-methylene-2-thioxo-dihydropyrimidine-4,6(1H,5H)-dione, the molecular orbital energy levels were well tuned. The modified dyes meet the basic requirements of both –ΔGinj and –ΔGreg being over 0.2 eV for an efficient hole injection and dye regeneration, respectively. All the designed p-type dyes O3–O7 have smaller energy gap and significant red shift in absorption spectra than that of the reference O2. Finally, our results suggested that O3–O7 have larger light-harvesting efficiencies (LHE) in the visible spectral regions of 400 nm to 700 nm than O2. Among all the dyes, O5 is expected to have an excellent performance as a p-type sensitized dye in solar cells due to its great LHE and sufficient hole injection efficiency.

Nanoarchitectures in dye-sensitized solar cells: metal oxides, oxide perovskites and carbon-based materials

Dye-sensitized solar cells (DSSCs) have aroused great interest and been regarded as a potential renewable energy resource among the third-generation solar cell technologies to fulfill the 21^st century global energy demand. DSSCs have notable advantages such as low cost, easy fabrication process and being eco-friendly in nature. The progress of DSSCs over the last 20 years has been nearly constant due to some limitations, like poor long-term stability, narrow absorption spectrum, charge carrier transportation and collection losses and poor charge transfer mechanism for regeneration of dye molecules. The main challenge for the scientific community is to improve the performance of DSSCs by using different approaches, like finding new electrode materials with suitable nanoarchitectures, dyes in composition with promising semiconductors and metal quantum dot fluorescent dyes, and cost-effective hole transporting materials (HTMs). This review focuses on DSSC photo-physics, which includes charge separation, effective transportation, collection and recombination processes. Different nanostructured materials, including metal oxides, oxide perovskites and carbon-based composites, have been studied for photoanodes, and counter electrodes, which are crucial to achieve DSSC devices with higher efficiency and better stability.

Highly Efficient Bifacial Dye-Sensitized Solar Cells Employing Polymeric Counter Electrodes

Dye-sensitized solar cells (DSCs) are promising solar energy conversion devices with aesthetically favorable properties such as being colorful and having transparent features. They are also well-known for high and reliable performance even under ambient lighting, and these advantages distinguish DSCs for applications in window-type building-integrated photovoltaics (BIPVs) that utilize photons from both lamplight and sunlight. Therefore, investigations on bifacial DSCs have been done intensively, but further enhancement in performance under back-illumination is essential for practical window-BIPV applications. In this research, highly efficient bifacial DSCs were prepared by a combination of electropolymerized poly(3,4-ethylenedioxythiphene) (PEDOT) counter electrodes (CEs) and cobalt bipyridine redox ([Co(bpy)₃]^3+/2+) electrolyte, both of which manifested superior transparency when compared with conventional Pt and iodide counterparts, respectively. Keen electrochemical analyses of PEDOT films verified that superior electrical properties were achievable when the thickness of the film was reduced, while their high electrocatalytic activities were unchanged. The combination of the PEDOT thin film and [Co(bpy)₃]^3+/2+ electrolyte led to an unprecedented power conversion efficiency among bifacial DSCs under back-illumination, which was also over 85% of that obtained under front-illumination. Furthermore, the advantage of the electropolymerization process, which does not require an elevation of temperature, was demonstrated by flexible bifacial DSC applications.

A theoretical study of fused thiophene modified anthracene-based organic dyes for dye-sensitized solar cell applications

As the fused-thiophene sizes increase, the main absorption peaks basically remain the same, but the oscillator strength increases and adsorption bands broaden.

Highly conductive and stable graphene/PEDOT:PSS composite as a metal free cathode for organic dye-sensitized solar cells

Platinum (Pt) as the counter electrode (CE) in dye-sensitized solar cells (DSSCs) is expensive and non-optimal for cobalt(ii/iii) redox couples, which can tune and improve the performance of DSSCs, thus motivating the search for replacements of the Pt CE. Graphene nanoplatelets (GnPs) are possible alternatives to Pt CEs but they are mechanically unstable as CEs due to their poor substrate adhesion. Here we report a new type of PEDOT:PSS (PP)/GnP (PPG) composite that maintains the catalytic performance of GnPs with enhanced adhesion to the substrate via a conductive PEDOT matrix. The resultant PPG exhibited extremely low charge-transfer resistance (R_ct) compared to Pt in its role as an electrocatalyst toward a Co(bpy)₃^2+/3+ (bpy = 2,2′-bipyridine) redox couple, and displayed extremely high electrochemical stability for Co(bpy)₃³⁺ reduction even after 1000 cycles. The inter-stacking of GnP layers between PEDOT and PSS was confirmed by XPS and Raman spectra. It helps to delocalize charges in the PEDOT backbone and rapidly transfers electrons from the external circuit to Co(bpy)₃³⁺. This reduces the R_ct and ultimately improves the photovoltaic performance. The DSSC based on Y123 sensitizer and PPG-CE showed a higher photovoltaic performance of 8.33% than its Pt counterpart does (7.99%) under the optimized conditions.

We report the development of a highly stable PEDOT:PSS/graphene (PP/GnP) composite-based counter electrode (CE) for high-performance dye-sensitized solar cells (DSSCs) in conjunction with Y123 sensitizer and Co(bpy)₃^2+/3+ (bpy = 2,2'-bypyridine) redox couple.

Three-in-one approach towards efficient organic dye-sensitized solar cells: aggregation suppression, panchromatic absorption and resonance energy transfer

In the present study, protoporphyrin IX (PPIX) and squarine (SQ2) have been used in a co-sensitized dye-sensitized solar cell (DSSC) to apply their high absorption coefficients in the visible and NIR region of the solar spectrum and to probe the possibility of Förster resonance energy transfer (FRET) between the two dyes. FRET from the donor PPIX to acceptor SQ2 was observed from detailed investigation of the excited-state photophysics of the dye mixture, using time-resolved fluorescence decay measurements. The electron transfer time scales from the dyes to TiO2 have also been characterized for each dye. The current-voltage (I-V) characteristics and the wavelength-dependent photocurrent measurements of the co-sensitized DSSCs reveal that FRET between the two dyes increase the photocurrent as well as the efficiency of the device. From the absorption spectra of the co-sensitized photoanodes, PPIX was observed to be efficiently acting as a co-adsorbent and to reduce the dye aggregation problem of SQ2. It has further been proven by a comparison of the device performance with a chenodeoxycholic acid (CDCA) added to a SQ2-sensitized DSSC. Apart from increasing the absorption window, the FRET-induced enhanced photocurrent and the anti-aggregating behavior of PPIX towards SQ2 are crucial points that improve the performance of the co-sensitized DSSC.

11% efficiency solid-state dye-sensitized solar cells with copper(II/I) hole transport materials

Solid-state dye-sensitized solar cells currently suffer from issues such as inadequate nanopore filling, low conductivity and crystallization of hole-transport materials infiltrated in the mesoscopic TiO₂ scaffolds, leading to low performances. Here we report a record 11% stable solid-state dye-sensitized solar cell under standard air mass 1.5 global using a hole-transport material composed of a blend of [Cu (4,4′,6,6′-tetramethyl-2,2′-bipyridine)₂](bis(trifluoromethylsulfonyl)imide)₂ and [Cu (4,4′,6,6′-tetramethyl-2,2′-bipyridine)₂](bis(trifluoromethylsulfonyl)imide). The amorphous Cu(II/I) conductors that conduct holes by rapid hopping infiltrated in a 6.5 μm-thick mesoscopic TiO₂ scaffold are crucial for achieving such high efficiency. Using time-resolved laser photolysis, we determine the time constants for electron injection from the photoexcited sensitizers Y123 into the TiO₂ and regeneration of the Y123 by Cu(I) to be 25 ps and 3.2 μs, respectively. Our work will foster the development of low-cost solid-state photovoltaic based on transition metal complexes as hole conductors.

Inadequate pore infiltration and low conductivity of hole transporter materials limit the performance of solid-state dye-sensitized solar cells. Using fast charge-exchange Cu(II/I) complexes as part of the hole transporting material, Cao et al. overcome these issues to achieve a record photoconversion efficiency of 11%.

2-(4-Butoxyphenyl)-N-hydroxyacetamide: An Efficient Preadsorber for Dye-Sensitized Solar Cells

The effect of chemical modification of mesoporous TiO₂ electrodes by 2-(4-butoxyphenyl)-N-hydroxyacetamide (BPHA) before dye adsorption is investigated in dye-sensitized solar cells (DSCs). Two organic dyes, LEG4 and Dyenamo blue, were used in combination with the cobalt (II/III) tris(bipyridine) redox couple. The photovoltaic performance of the DSCs is clearly enhanced by BPHA. Preadsorption of mesoporous TiO₂ electrodes with BPHA lowered the amount of adsorbed dye but improved the short-circuit current densities and the power conversion efficiencies by 10-20%, while keeping the open-circuit potential essentially unaffected. Notably, BPHA improved the LEG4 performance, whereas it has been reported for this dye that chenodeoxycholic acid as a coadsorbent lowers solar cell efficiency. Faster dye regeneration was found to be one reason for improved performance, but improved electron injection efficiency may also contribute to the favorable effect of BPHA.

Electrochemical synthesis of nanoporous tungsten carbide and its application as electrocatalysts for photoelectrochemical cells

Photoelectrochemical (PEC) cells are promising tools for renewable and sustainable solar energy conversion. Currently, their inadequate performance and high cost of the noble metals used in the electrocatalytic counter electrode have postponed the practical use of PEC cells. In this study, we report the electrochemical synthesis of nanoporous tungsten carbide and its application as a reduction catalyst in PEC cells, namely, dye-sensitized solar cells (DSCs) and PEC water splitting cells, for the first time. The method employed in this study involves the anodization of tungsten foil followed by post heat treatment in a CO atmosphere to produce highly crystalline tungsten carbide film with an interconnected nanostructure. This exhibited high catalytic activity for the reduction of cobalt bipyridine species, which represent state-of-the-art redox couples for DSCs. The performance of tungsten carbide even surpassed that of Pt, and a substantial increase (∼25%) in energy conversion efficiency was achieved when Pt was substituted by tungsten carbide film as the counter electrode. In addition, tungsten carbide displayed decent activity as a catalyst for the hydrogen evolution reaction, suggesting the high feasibility for its utilization as a cathode material for PEC water splitting cells, which was also verified in a two-electrode water photoelectrolyzer.

High-Voltage Dye-Sensitized Solar Cells Mediated by [Co(2,2'-bipyrimidine)3]z

The cobalt complex [Co(2,2'-bipyrimidine)₃](PF₆)₂ (Co-bpm) was tested as a redox mediator in the dye-sensitized solar cell. The measured photovoltages for the cells were in excess of 1 V, which is approximately 3-fold greater than that measured for devices where [Co(2,2'-bipyridine)₃](PF₆)₂ (Co-bpy) was used as the redox mediator under the same experimental conditions. The root cause of this voltage enhancement is the Co^III/Co^II redox potential for Co-bpm being positively shifted by 0.50 V relative to the Co-bpy mediator. This result highlights how the number and position of the N atoms in aromatic ligands can have a profound effect on the measured photovoltage.

Low-cost solution-processed digenite Cu9S5 counter electrode for dye-sensitized solar cells

Cu₉S₅ nanocrystalline film is fabricated by a solution-processed method with a low temperature post-treatment at 250 °C and it is further explored as a counter electrode (CE) material in DSSCs.

Efficient dye-sensitized solar cells with [copper(6,6′-dimethyl-2,2′-bipyridine)2]2+/1+ redox shuttle

A copper(6,6′-dimethyl-2,2′-bipyridine)₂]^2+/1+ redox couple was developed as a redox mediator in dye-sensitized solar cells.

Improving the mass transport of copper-complex redox mediators in dye-sensitized solar cells by reducing the inter-electrode distance

Reduction of inter-electrode distance in DSCs with copper-based electrolyte increases the photocurrent and fill factor by improving internal transport.

Copper Bipyridyl Redox Mediators for Dye-Sensitized Solar Cells with High Photovoltage

Redox mediators play a major role determining the photocurrent and the photovoltage in dye-sensitized solar cells (DSCs). To maintain the photocurrent, the reduction of oxidized dye by the redox mediator should be significantly faster than the electron back transfer between TiO₂ and the oxidized dye. The driving force for dye regeneration with the redox mediator should be sufficiently low to provide high photovoltages. With the introduction of our new copper complexes as promising redox mediators in DSCs both criteria are satisfied to enhance power conversion efficiencies. In this study, two copper bipyridyl complexes, Cu^(II/I)(dmby)₂TFSI_2/1 (0.97 V vs SHE, dmby = 6,6'-dimethyl-2,2'-bipyridine) and Cu^(II/I)(tmby)₂TFSI_2/1 (0.87 V vs SHE, tmby = 4,4',6,6'-tetramethyl-2,2'-bipyridine), are presented as new redox couples for DSCs. They are compared to previously reported Cu^(II/I)(dmp)₂TFSI_2/1 (0.93 V vs SHE, dmp = bis(2,9-dimethyl-1,10-phenanthroline). Due to the small reorganization energy between Cu(I) and Cu(II) species, these copper complexes can sufficiently regenerate the oxidized dye molecules with close to unity yield at driving force potentials as low as 0.1 V. The high photovoltages of over 1.0 V were achieved by the series of copper complex based redox mediators without compromising photocurrent densities. Despite the small driving forces for dye regeneration, fast and efficient dye regeneration (2-3 μs) was observed for both complexes. As another advantage, the electron back transfer (recombination) rates were slower with Cu^(II/I)(tmby)₂TFSI_2/1 as evidenced by longer lifetimes. The solar-to-electrical power conversion efficiencies for [Cu(tmby)₂]^2+/1+, [Cu(dmby)₂]^2+/1+, and [Cu(dmp)₂]^2+/1+ based electrolytes were 10.3%, 10.0%, and 10.3%, respectively, using the organic Y123 dye under 1000 W m^-2 AM1.5G illumination. The high photovoltaic performance of Cu-based redox mediators underlines the significant potential of the new redox mediators and points to a new research and development direction for DSCs.

Wrinkled silica/titania nanoparticles with tunable interwrinkle distances for efficient utilization of photons in dye-sensitized solar cells

Efficient light harvesting is essential for the realization of high energy conversion efficiency in dye-sensitized solar cells (DSCs). State-of-the-art mesoporous TiO₂ photoanodes fall short for collection of long-wavelength visible light photons, and thus there have been efforts on introduction of scattering nanoparticles. Herein, we report the synthesis of wrinkled silica/titania nanoparticles with tunable interwrinkle distances as scattering materials for enhanced light harvesting in DSCs. These particles with more than 20 times larger specific surface area (>400 m²/g) compared to the spherical scattering particles (<20 m²/g) of the similar sizes gave rise to the dye-loading amounts, causing significant improvements in photocurrent density and efficiency. Moreover, dependence of spectral scattering properties of wrinkled particles on interwrinkle distances, which was originated from difference in overall refractive indices, was observed.