Photocatalytic hydrogen evolution from glycerol and water over nickel-hybrid cadmium sulfide quantum dots under visible-light irradiation

Simultaneously Producing H2 and H2O2 by Photocatalytic Water Splitting: Recent Progress and Future

The solar-driven overall water splitting (2H2O→2H2 + O2) is considered as one of the most promising strategies for reducing carbon emissions and meeting energy demands. However, due to the sluggish performance and high H2 cost, there is still a big gap for the current photocatalytic systems to meet the requirements for practical sustainable H2 production. Economic feasibility can be attained through simultaneously generating products of greater value than O2, such as hydrogen peroxide (H2O2, 2H2O→H2 + H2O2). Compared with overall water splitting, this approach is more kinetically feasible and generates more high-value products of H2 and H2O2. In several years, there has been an increasing surge in exploring the possibility and substantial progress has been achieved. In this review, a concise overview of the importance and underlying principles of PIWS is first provided. Next, the reported typical photocatalysts for PIWS are discussed, including commonly used semiconductors and cocatalysts, essential design features of these photocatalysts, and connections between their structures and activities, as well as the selected approaches for enhancing their stability. Then, the techniques used to quantify H2O2 and the operando characterization techniques that can be employed to gain a thorough understanding of the reaction mechanisms are summarized. Finally, the current existing challenges and the direction needing improvement are presented. This review aims to provide a thorough summary of the most recent research developments in PIWS and sets the stage for future advancements and discoveries in this emerging area.

Synergistic Effect of Rutile and Brookite TiO2 for Photocatalytic Formic Acid Dehydrogenation

Solar energy is an ideal clean and inexhaustible energy source. Solar-driven formic acid (FA) dehydrogenation is one of the promising strategies to address safety and cost issues related to the storage, transport, and distribution of hydrogen energy. For FA dehydrogenation, the O-H and C-H cleavages are the key steps, and developing a photocatalyst with the ability to break these two bonds is critical. In this work, both density functional theory (DFT) calculation and experimental results confirmed the positive synergistic effect between brookite and rutile TiO2 for O-H and C-H cleavage in HCOOH. Further, brookite TiO2 is beneficial to the generation of the •OH radical and significantly promotes C-H cleavage in formate. Under optimized conditions, the H2 production efficiency of FA dehydrogenation can reach up to 30.4 μmol·mg-1·h-1, which is the highest value compared with similar reported TiO2-based systems and over 1.7 times the reported highest value of Au0.75Pd0.25/TiO2 photocatalysts. More importantly, after more than 42 days (>500 h) of irradiation, the system still demonstrated high H2 production activity, indicating the potential for practical application. This work provides a valuable strategy to improve both the efficiency and stability of photocatalytic FA dehydrogenation under mild conditions.

Acceptorless or Transfer Dehydrogenation of Glycerol Catalyzed by Base Metal Salt Cobaltous Chloride - Facile Access to Lactic Acid and Hydrogen or Isopropanol

The dehydrogenation of glycerol to lactic acid (LA) under both acceptorless and transfer dehydrogenation conditions using readily available, inexpensive, environmentally benign and earth-abundant base metal salt CoCl2 is reported here. The CoCl2 (0.5 mol %) catalyzed acceptorless dehydrogenation of glycerol at 160 °C in the presence of 0.75 equiv. of KOH, gave up to 33 % yield of LA in 44 % selectivity apart from hydrogen. Alternatively, with acetone as a sacrificial hydrogen acceptor, the CoCl2 (0.5 mol %) catalyzed dehydrogenation of glycerol at 160 °C in the presence of 1.1 equiv. of NaOt Bu resulted in up to 93 % LA with 96 % selectivity along with another value-added product isopropanol. Labelling studies revealed a modest secondary KIE of 1.68 which points to the involvement of C-H bond activation as a part of the catalytic cycle but not as a part of the rate-determining step. Catalyst poisoning experiments with PPh3 and CS2 are indicative of the homogeneous nature of the reaction mixture involving molecular species that are likely to be in-situ formed octahedral Co(II) as inferred from EPR, HRMS and Evans magnetic moment studies. The net transfer dehydrogenation activity is attributed to exclusive contribution from the alcoholysis step.

Massively synthesizable nickel-doped 1T-MoS2 nanosheet catalyst as an efficient tri-functional catalyst

In this study, a nickel (Ni)-doped 1T-MoS₂ catalyst, an efficient tri-functional hydrogen evolution reaction (HER), oxygen evolution reaction (OER), and oxygen reduction reaction (ORR) catalyst, was massively synthesized at high pressure (over 15 bar). The morphology, crystal structure, and chemical and optical properties of the Ni-doped 1T-MoS₂ nanosheet catalyst were characterized by transmission electron microscopy (TEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and ring rotating disk electrodes (RRDE), and the OER/ORR properties were characterized using lithium-air cells. Our results confirmed that highly pure, uniform, monolayer Ni-doped 1T-MoS₂ can be successfully prepared. The as-prepared catalysts exhibited excellent electrocatalytic activity for OER, HER, and ORR owing to the enhanced basal plane activity of Ni doping and formidable active edge sites resulting from the phase transition to a highly crystalline 1T structure from 2H and amorphous MoS₂. Therefore, our study provides a massive and straightforward strategy to produce tri-functional catalysts.

Hydrogen Production from Formic Acid by In Situ Generated Ni/CdS Photocatalytic System under Visible Light Irradiation

Simple and practical noble-metal-free catalyzed hydrogen production from sustainable resources, such as renewable formic acid, is highly desirable. Herein, the development of an efficient photocatalytic hydrogen production from aqueous solution of formic acid using in situ generated Ni/CdS photocatalytic system was described. CdS-Cys (Cys=l-cysteine) quantum dots (QDs) acting as photocatalyst with Ni(OAc)₂ as H₂ production catalyst precursor, a 94 % yield was obtained within 5 h under visible light irradiation at 50 °C. The average rate of H₂ production reached up to 282 μmol mg^-1  h^-1 with 99.8 % H₂ selectivity. Mechanistic studies indicate cooperation of dynamic quenching and static quenching of CdS-Cys QDs by Ni(OAc)₂ . Especially, Ni⁰ , generated in the dynamic quenching, accelerated the electron transfer by acting as an electron outlet and enhancing the stability of CdS to slow down the photocorrosion distinctly, delivering efficient H₂ production with high selectivity. Our study will inspire exploration of various efficient non-noble-metal catalysts for practical H₂ production from bio-based formic acid.

Photocatalytic hydrogen evolution from glycerol-water mixture under visible light over zinc indium sulfide (ZnIn2S4) nanosheets grown on bismuth oxychloride (BiOCl) microplates

ZnIn₂S₄ (ZIS) is one of the widely studied photocatalyst for photocatalytic hydrogen evolution applications due to its prominent visible light response and strong reduction ability. However, its photocatalytic glycerol reforming performance for hydrogen evolution has never been reported. Herein, the visible light driven BiOCl@ZnIn₂S₄ (BiOCl@ZIS) composite was synthesized by growth of ZIS nanosheets on a template-like hydrothermally pre-prepared wide-band-gap BiOCl microplates using simple oil-bath method to be used for the first time for photocatalytic glycerol reforming for photocatalytic hydrogen evolution (PHE) under visible light irradiation (λ > 420 nm). The optimum amount of BiOCl microplates in the composite was found 4 wt% (4% BiOCl@ZIS) in the presence of in-situ 1 wt% Pt deposition. Then, the in-situ Pt photodeposition optimization studies over 4% BiOCl@ZIS composite showed the highest PHE rate of 674 μmol g^-1h^-1 with the ultra-low platinum amount (0.0625 wt%). The possible mechanisms behind this improvement can be ascribed to the formation of Bi₂S₃ low-band-gap semiconductor during BiOCl@ZIS composite synthesis resulting in Z-scheme charge transfer mechanism between ZIS and Bi₂S₃ upon visible light irradiation. This work expresses not only the photocatalytic glycerol reforming over ZIS photocatalyst but also a solid proof of the contribution of wide-band-gap BiOCl photocatalysts to enhancement of ZIS PHE performance under visible light.

Rich Landscape of Colloidal Semiconductor-Metal Hybrid Nanostructures: Synthesis, Synergetic Characteristics, and Emerging Applications

Nanochemistry provides powerful synthetic tools allowing one to combine different materials on a single nanostructure, thus unfolding numerous possibilities to tailor their properties toward diverse functionalities. Herein, we review the progress in the field of semiconductor-metal hybrid nanoparticles (HNPs) focusing on metal-chalcogenides-metal combined systems. The fundamental principles of their synthesis are discussed, leading to a myriad of possible hybrid architectures including Janus zero-dimensional quantum dot-based systems and anisotropic quasi 1D nanorods and quasi-2D platelets. The properties of HNPs are described with particular focus on emergent synergetic characteristics. Of these, the light-induced charge-separation effect across the semiconductor-metal nanojunction is of particular interest as a basis for the utilization of HNPs in photocatalytic applications. The extensive studies on the charge-separation behavior and its dependence on the HNPs structural characteristics, environmental and chemical conditions, and light excitation regime are surveyed. Combining the advanced synthetic control with the charge-separation effect has led to demonstration of various applications of HNPs in different fields. A particular promise lies in their functionality as photocatalysts for a variety of uses, including solar-to-fuel conversion, as a new type of photoinitiator for photopolymerization and 3D printing, and in novel chemical and biomedical uses.

Nano Schottky?

The existence of a reduced Schottky barrier at the nanoscale junction between semiconductor and metal domains has yet to be acknowledged among the photocatalysis community, despite its critical role in dictating the quality and functionality of the hybrid photocatalytic system.

Photocatalytic CO2 Conversion Using Metal-Containing Coordination Polymers and Networks: Recent Developments in Material Design and Mechanistic Details

International guidelines have progressively addressed global warming which is caused by the greenhouse effect. The greenhouse effect originates from the atmosphere’s gases which trap sunlight which, as a consequence, causes an increase in global surface temperature. Carbon dioxide is one of these greenhouse gases and is mainly produced by anthropogenic emissions. The urgency of removing atmospheric carbon dioxide from the atmosphere to reduce the greenhouse effect has initiated the development of methods to covert carbon dioxide into valuable products. One approach that was developed is the photocatalytic transformation of CO2. Photocatalysis addresses environmental issues by transferring CO2 into value added chemicals by mimicking the natural photosynthesis process. During this process, the photocatalytic system is excited by light energy. CO2 is adsorbed at the catalytic metal centers where it is subsequently reduced. To overcome several obstacles for achieving an efficient photocatalytic reduction process, the use of metal-containing polymers as photocatalysts for carbon dioxide reduction is highlighted in this review. The attention of this manuscript is directed towards recent advances in material design and mechanistic details of the process using different polymeric materials and photocatalysts.

Selective Electrocatalytic Reduction of Nitrate to Ammonia with Nickel Phosphide

Liquid ammonia is considered a sustainable liquid fuel and an easily transportable carrier of hydrogen energy; however, its synthesis processes are energy-consuming, high cost, and low yield rate. Herein, we report the electrocatalytic reduction of nitrate (NO₃^-) (ERN) to ammonia (NH₃) with nickel phosphide (Ni₂P) used as a noble metal-free cathode. Ni₂P with (111) facet was grown in situ on nickel foam (NFP), which was regarded as a self-supporting cathode for ERN to synthesis NH₃ with high yield rate (0.056 mmol h^-1 mg^-1) and superior faradaic efficiency of 99.23%. The derived atomic H (*H), verified by a quenching experiment and an electron spin resonance (ESR) technique, effectively enhanced the high selectivity for NH₃ generation. DFT calculations indicated that *NO₃ was deoxygenated to *NO₂ and *NO, and *NO was subsequently hydrogenated with *H to generate NH₃ with an energy releasing process (ΔG < 0). OLEMS also proved that NO was the merely gas intermediate. NFP exhibited the unique superhydrophilic surface, metallic properties, low impedance, and abundant surface sites, favorable for adsorption of NO₃^-, generation of *H, and then hydrogenation of NO₃^-. Hence, NFP cathode showed high selectivity for NH₃ (89.1%) in ERN. NFP with long-term stability and low energy consumption provides a facile strategy for synthesis of NH₃ and elimination of NO₃^- contamination.

Solar and visible-light active nano Ni/g-C3N4 photocatalyst for carbon monoxide (CO) and ligand-free carbonylation reactions

In this study, we investigate the amino and alkoxycarbonylation reaction between various substituted aryl halides, benzyl iodides, and iodocyclohexane with different types of amines and alcohols in the absence of carbon monoxide gas and ligands.

Current developments and future trends in photocatalytic glycerol valorization: process analysis

Challenges and opportunities in photocatalytic glycerol valorization to hydrogen and value-added liquid products: process analysis and parametric study.

Emergence of sulfur quantum dots: Unfolding their synthesis, properties, and applications

Over the past few decades, the sphere of applied science has witnessed soaring demand in developing high performance, novel and sustainable materials due to ever-increasing population coupled with need for alternative-green-energy resources. Inevitably, sulfur research expands through the breadth of materials sciences including sustainable use of the by-products obtained from petroleum industry, preparation of biocompatible materials, and constructing energy harvesting devices, indispensable to our everyday lives. Congruous with popular heavy-metal free elemental quantum dots such as the carbon, silicon and phosphorus, emergence of sulfur quantum dots (SQDs) has drawn substantial attention due to their bright luminescence, infrequent to other sulfur allotropes. In this review article, we focus some of the pioneering advances on synthesis and characterizations of luminescent sulfur nanodots and their potential applications in bioimaging, fabrication of light emitting devices, sensing and catalysis. Finally, critical challenges along with future perspectives corresponding to this newly discovered research area have been discussed.

Enhanced Photocatalytic H2 -Production Activity of CdS Quantum Dots Using Sn2+ as Cocatalyst under Visible Light Irradiation

Herein, oil-soluble CdS quantum dots (QDs) are first prepared through a solvent-thermal process. Then, oil-soluble CdS QDs are changed into water-soluble QDs via ligand exchange using mercaptopropionic acid as capping agent at pH 13. The photocatalytic performance is investigated under the visible light irradiation using glycerol as sacrificial agent and Sn²⁺ as cocatalyst. No H₂ -production activity is observed for oil-soluble CdS QDs. Water-soluble CdS QDs exhibit significantly enhanced hydrogen evolution rate. When the concentration of cocatalyst Sn²⁺ increases to 0.2 × 10^-3 m, the rate of hydrogen evolution reaches 1.61 mmol g^-1 h^-1 , which is 24 times higher than that of the pristine water-soluble CdS QDs. The enhanced H₂ -production efficiency is attributed to the adsorption of Sn²⁺ ions on the surface of CdS QDs that are further reduced to Sn atoms by photogenerated electrons. The in situ generated Sn atoms serve as photocatalytic cocatalyst for efficient hydrogen generation.

Semiconductor Quantum Dots as Components of Photoactive Supramolecular Architectures

Luminescent quantum dots (QDs) are colloidal semiconductor nanocrystals consisting of an inorganic core covered by a molecular layer of organic surfactants. Although QDs have been known for more than thirty years, they are still attracting the interest of researchers because of their unique size-tunable optical and electrical properties arising from quantum confinement. Moreover, the controlled decoration of the QD surface with suitable molecular species enables the rational design of inorganic-organic multicomponent architectures that can show a vast array of functionalities. This minireview highlights the recent progress in the use of surface-modified QDs - in particular, those based on cadmium chalcogenides - as supramolecular platforms for light-related applications such as optical sensing, triplet photosensitization, photocatalysis and phototherapy.

Immobilization of catalytic sites on quantum dots by ligand bridging for photocatalytic CO2 reduction

Harvesting solar energy to convert carbon dioxide (CO₂) into fossil fuels shows great promise to solve the current global problems of energy crisis and climate change. To achieve this goal, it is desirable to develop efficient catalysts with visible light response to cater for the solar spectrum. CdTe QDs are ideal candidates for absorbing visible light, but it is difficult to directly perform CO₂ reduction due to the lack of effective catalytic sites. Herein, we report a strategy for the activation of mercaptopropionic acid (MPA)-capped CdTe QDs for visible-light-driven CO₂ reduction, in which iron ions (Fe²⁺) are immobilized onto CdTe QDs using l-cysteine as a bridging ligand (CdTe-b-Fe). This ligand bridging strategy can immobilize Fe²⁺ ions on the surface of CdTe QDs as catalytic sites, and these catalytic sites can be conveniently adjusted by directly adding different types or numbers of metal ions. In addition to effectively immobilizing catalytic sites, the bridging ligands can also provide a pathway for electron transport between CdTe QDs and the catalytic sites. The CdTe-b-Fe QD system based on the ligand bridging strategy exhibits excellent catalytic properties: the yield of CH₄/CO (two products together) is 126 μmol g^-1 h^-1, and the selectivity for carbon-based products approaches 98%. This work presents a facile strategy for immobilizing catalytic sites on QDs and provides a platform for designing efficient visible-light driven catalysts for CO₂ reduction.

Controlled Decoration of Divalent Nickel onto CdS/CdSe Core/Shell Quantum Dots to Boost Visible-Light-Induced Hydrogen Generation in Water

The search for a low-cost, noble-metal-free cocatalyst to replace expensive Pt for hydrogen (H₂ ) photogeneration in water has become a hot research topic, and among these, Ni-based cocatalysts are promising and highly desired. Developing new strategies and protocols to obtain Ni-based cocatalysts with high activity is therefore vitally important. Herein, we develop a new method to efficiently decorate divalent Ni onto pre-synthesized CdS/CdSe core/shell quantum dots (QDs). The concentration of Ni on the QDs can be easily tuned by varying the amount of the Ni precursor introduced during the synthesis. Further analyses reveal that Ni²⁺ can be strongly decorated onto QDs. Impressively, the Ni-decorated QDs displayed a significantly enhanced H₂ photogeneration performance as compared to the two components prepared separately. Through the optimization of the Ni concentration on the QDs, the turnover frequency (TOF) with respect to Ni and quantum yield ( Φ H 2 ) at 520 nm for H₂ evolution from water could reach 322 h^-1 and 12.3 %, respectively. A possible mechanism has also been proposed and discussed in detail.

Highly efficient and selective photocatalytic CO2 reduction based on water-soluble CdS QDs modified by the mixed ligands in one pot

The noble metal-free photocatalysts with good water solubility, high efficiency and high selectivity to promote CO₂ conversion.

Tri-functional molecular relay to fabricate size-controlled CoOx nanoparticles and WO3 photoanode for an efficient photoelectrochemical water oxidation

Heterojunction and element doping to couple light-harvesting semiconductors with catalytic materials have been widely employed for photoelectrochemical (PEC) water splitting.

Selective and high yield transformation of glycerol to lactic acid using NNN pincer ruthenium catalysts

A sterically less hindered 2,6-bis(benzimidazol-2-yl)pyridine based pincer–ruthenium complex has been used here to accomplish the catalytic conversion of glycerol selectively to lactic acid in high yield.

Sustainable hydrogen production for the greener environment by quantum dots-based efficient photocatalysts: A review

Nano-size photocatalysts exhibit multifunctional properties that opened the door for improved efficiency in energy, environment, and health care applications. Among the diversity of catalyst Quantum dots are a class of nanomaterials having a particle size between 2 and 10 nm, showing unique optoelectrical properties that are limited to some of the metal, metal oxide, metal chalcogenides, and carbon-based nanostructures. These unique characteristics arise from either pristine or binary/ternary composites where noble metal/metal oxide/metal chalcogenide/carbon quantum dots are anchored on the surface of semiconductor photocatalyst. It emphasized that properties, as well as performance of photocatalytic materials, are greatly influenced by the choice of synthesis methods and experimental conditions. Among the chemical methods, photo-deposition, precipitation, and chemical reduction, are the three most influential synthesis approaches. Further, two types of quantum dots namely metal based and carbon-based materials have been highlighted. Based on the optical, electrical and surface properties, quantum dots based photocatalysts have been divided into three categories namely (a) photocatalyst (b) co-catalyst and (c) photo-sensitizer. They showed enhanced photocatalytic performance for hydrogen production under visible/UV-visible light irradiation. Often, pristine metal chalcogenides as well as metal/metal oxide/carbon quantum dots attached to a semiconductor particle exhibit enhanced the photocatalytic activity for hydrogen production through absorption of visible light. Alternatively, noble metal quantum dots, which provide plenty of defects/active sites facilitate continuous hydrogen production. For instance, production of hydrogen in the presence of sacrificial agents using metal chalcogenides, metal oxides, and coinage metals based catalysts such as CdS/MoS₂ (99,000 μmol h^-1g^-1) TiO₂-Ni(OH)₂ (47,195 μmol h^-1g^-1) and Cu/Ag-TiO₂ nanotubes (56,167 μmol h^-1g^-1) have been reported. Among the carbon-based nanostructures, graphitic C₃N₄ and carbon quantum dots composites displayed enhanced hydrogen gas (116.1 μmol h^-1) production via overall water splitting. This review accounts recent findings on various chemical approaches used for quantum dots synthesis and their improved materials properties leading to enhanced hydrogen production particularly under visible light irradiation. Finally, the avenue to improve quantum efficiency further is proposed.

Biocompatible Quantum Funnels for Neural Photostimulation

Neural photostimulation has high potential to understand the working principles of complex neural networks and develop novel therapeutic methods for neurological disorders. A key issue in the light-induced cell stimulation is the efficient conversion of light to bioelectrical stimuli. In photosynthetic systems developed in millions of years by nature, the absorbed energy by the photoabsorbers is transported via nonradiative energy transfer to the reaction centers. Inspired by these systems, neural interfaces based on biocompatible quantum funnels are developed that direct the photogenerated charge carriers toward the bionanojunction for effective photostimulation. Funnels are constructed with indium-based rainbow quantum dots that are assembled in a graded energy profile. Implementation of a quantum funnel enhances the generated photoelectrochemical current 215% per unit absorbance in comparison with ungraded energy profile in a wireless and free-standing mode and facilitates optical neuromodulation of a single cell. This study indicates that the control of charge transport at nanoscale can lead to unconventional and effective neural interfaces.

Role of the Relative Humidity and the Cd/Zn Stoichiometry in the Photooxidation Process of Cadmium Yellows (CdS/Cd1-x Znx S) in Oil Paintings

Cadmium yellows (CdYs) refer to a family of cadmium sulfide pigments, which have been widely used by artists since the late 19th century. Despite being considered stable, they are suffering from discoloration in iconic paintings, such as Joy of Life by Matisse, Flowers in a blue vase by Van Gogh, and The Scream by Munch, most likely due to the formation of CdSO₄ ⋅n H₂ O. The driving factors of the CdYs degradation and how these affect the overall process are still unknown. Here, we study a series of oil mock-up paints made of CdYs of different stoichiometry (CdS/Cd_0.76 Zn_0.24 S) and crystalline structure (hexagonal/cubic) before and after aging at variable relative humidity under exposure to light and in darkness. Synchrotron radiation-based X-ray methods combined with UV-Vis and FTIR spectroscopy show that: 1) Cd_0.76 Zn_0.24 S is more susceptible to photooxidation than CdS; both compounds can act as photocatalysts for the oil oxidation. 2) The photooxidation of CdS/Cd_0.76 Zn_0.24 S to CdSO₄ ⋅n H₂ O is triggered by moisture. 3) The nature of alteration products depends on the aging conditions and the Cd/Zn stoichiometry. Based on our findings, we propose a scheme for the mechanism of the photocorrosion process and the photocatalytic activity of CdY pigments in the oil binder. Overall, our results form a reliable basis for understanding the degradation of CdS-based paints in artworks and contribute towards developing better ways of preserving them for future generations.

Controllable deuteration of halogenated compounds by photocatalytic D2O splitting

Deuterium labeling is of great value in organic synthesis and the pharmaceutical industry. However, the state-of-the-art C–H/C–D exchange using noble metal catalysts or strong bases/acids suffers from poor functional group tolerances, poor selectivity and lack of scope for generating molecular complexity. Herein, we demonstrate the deuteration of halides using heavy water as the deuteration reagent and porous CdSe nanosheets as the catalyst. The deuteration mechanism involves the generation of highly active carbon and deuterium radicals via photoinduced electron transfer from CdSe to the substrates, followed by tandem radicals coupling process, which is mechanistically distinct from the traditional methods involving deuterium cations or anions. Our deuteration strategy shows better selectivity and functional group tolerances than current C–H/C–D exchange methods. Extending the synthetic scope, deuterated boronic acids, halides, alkynes, and aldehydes can be used as synthons in Suzuki coupling, Click reaction, C–H bond insertion reaction etc. for the synthesis of complex deuterated molecules.

Developing convenient deuterium labeling procedures is important in organic synthesis and the pharmaceutical industry. Here, the authors report a mild photocatalytic strategy for controllable deuteration of halides using D₂O as the reagent and porous CdSe nanosheets as the catalyst.

Nonstoichiometric Cux Iny S Quantum Dots for Efficient Photocatalytic Hydrogen Evolution

Unlike their bulk counterpart, Cu_x In_y S quantum dots (QDs) prepared by an aqueous synthetic approach, show promising activity for photocatalytic hydrogen evolution, which is competitive with the state-of-the-art Cd chalcogen QDs. Moreover, the as-prepared Cu_x In_y S QDs with In-rich composition show much better efficiency than the stoichiometric ones (Cu/In=1:1).

A highly efficient noble metal free photocatalytic hydrogen evolution system containing MoP and CdS quantum dots

We report the construction of a highly efficient noble metal free photocatalytic hydrogen (H2) evolution system using CdS quantum dots as the light absorber and metallic MoP as the cocatalyst. MoP can be prepared by a facile temperature programmed reduction method and small clusters of MoP nanoparticles sized 10-30 nm were obtained by probe ultrasonication. The effect of synthesis conditions on the electrocatalytic and photocatalytic H2 evolution activity of MoP was investigated. The highest H2 evolution rate of 1100 μmol h(-1) can be achieved by the optimized system under visible light (λ≥ 420 nm), which is comparable to that when Pt was used as the cocatalyst. A high quantum efficiency of 45% is obtained at 460 nm irradiation.

Roles of adsorption sites in electron transfer from CdS quantum dots to molecular catalyst cobaloxime studied by time-resolved spectroscopy

Electron transfer from CdS quantum dots (QDs) to cobaloxime (Co(dmgH)₂pyCl) is demonstrated by transient absorption spectroscopy (TAS), and further confirmed using photoluminescence (PL) techniques.

Nickel as a co-catalyst for photocatalytic hydrogen evolution on graphitic-carbon nitride (sg-CN): what is the nature of the active species?

Structural changes of a nickel co-catalyst on graphitic carbon nitride have been uncovered during photocatalytic proton reduction by using XPS and in situ EPR measurements.

Vectorial electron transfer for improved hydrogen evolution by mercaptopropionic-acid-regulated CdSe quantum-dots-TiO2 -Ni(OH)2 assembly

A visible-light-induced hydrogen evolution system based on a CdSe quantum dots (QDs)-TiO2 -Ni(OH)2 ternary assembly has been constructed under an ambient environment, and a bifunctional molecular linker, mercaptopropionic acid, is used to facilitate the interaction between CdSe QDs and TiO2 . This hydrogen evolution system works effectively in a basic aqueous solution (pH 11.0) to achieve a hydrogen evolution rate of 10.1 mmol g(-1)  h(-1) for the assembly and a turnover frequency of 5140 h(-1) with respect to CdSe QDs (10 h); the latter is comparable with the highest value reported for QD systems in an acidic environment. X-ray photoelectron spectroscopy, X-ray absorption spectroscopy, and control experiments demonstrate that Ni(OH)2 is an efficient hydrogen evolution catalyst. In addition, inductively coupled plasma optical emission spectroscopy and the emission decay of the assembly combined with the hydrogen evolution experiments show that TiO2 functions mainly as the electron mediator; the vectorial electron transfer from CdSe QDs to TiO2 and then from TiO2 to Ni(OH)2 enhances the efficiency for hydrogen evolution. The assembly comprises light antenna CdSe QDs, electron mediator TiO2 , and catalytic Ni(OH)2 , which mimics the strategy of photosynthesis exploited in nature and takes us a step further towards artificial photosynthesis.

Visible light catalysis-assisted assembly of Ni(h)-QD hollow nanospheres in situ via hydrogen bubbles

Hollow spheres are one of the most promising micro-/nanostructures because of their unique performance in diverse applications. Templates, surfactants, and structure-directing agents are often used to control the sizes and morphologies of hollow spheres. In this Article, we describe a simple method based on visible light catalysis for preparing hollow nanospheres from CdE (E = Te, Se, and S) quantum dots (QDs) and nickel (Ni(2+)) salts in aqueous media. In contrast to the well-developed traditional approaches, the hollow nanospheres of QDs are formed in situ by the photogeneration of hydrogen (H2) gas bubbles at room temperature. Each component, that is, the QDs, metal ions, ascorbic acid (H2A), and visible light, is essential for the formation of hollow nanospheres. The quality of the hollow nanospheres depends on the pH, metal ions, and wavelength and intensity of visible light used. Of the various metal ions investigated, including Cu(+), Cu(2+), Fe(2+), Fe(3+), Ni(2+), Mn(2+), RuCl5(2-), Ag(+), and PtCl4(2-), Ni(2+) ions showed the best ability to generate H2 and hollow-structured nanospheres under visible light irradiation. The average diameter and shell thickness of the nanospheres ranged from 10 to 20 nm and from 3 to 6 nm, respectively, which are values rarely reported in the literature. Studies using high-resolution transmission electron microscopy (HRTEM), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), inductively coupled plasma-mass spectroscopy (ICP-AES), and steady-state and time-resolved spectroscopy revealed the chemical nature of the hollow nanospheres. Additionally, the hollow-structured nanospheres exhibit excellent photocatalytic activity and stability for the generation of H2 with a rate constant of 21 μmol h(-1) mg(-1) and a turnover number (TON) of 137,500 or 30,250 for CdTe QDs or nickel, respectively, under visible light irradiation for 42 h.