Understanding cellulose dissolution: energetics of interactions of ionic liquids and cellobiose revealed by solution microcalorimetry

Glycosidic bond protection of cellulose during solvent dissolution by coordination interaction competition strategy

Exploiting new solvents on efficiently dissolving cellulose is imperative to promote the utilization of cellulosic resources. The process of cellulose dissolution typically necessitates extreme conditions, such as high-temperature treatment, utilization of potent acidic or basic solvents, or the catalytic action of Lewis acids. As a result, the structure of the cellulose is invariably compromised, subsequently obstructing the creation of high-performance materials. In this study, we address this challenge through a simple process, introducing polyethylene glycol (PEG) as glycosidic bond protecting agent, to preserve the polymerization degree of cellulose during its room-temperature dissolution in ZnCl2-phosporic acid eutectic solvent. The PEG units preferentially coordinate with Zn2+ to weaken the hydrolysis of glycosidic bond of cellulose through ether bond competition. The polymerization degree of regenerated cellulose is thus greatly improved, reaching up to seven times that of unprotected cellulose. Overall, this study offers an easy and cost-effective approach to develop cellulose solvents and provides a significant drive towards the fabrication of practical materials through cellulose dissolution.

Thermo-reversible cellulose micro phase-separation in mixtures of methyltributylphosphonium acetate and γ-valerolactone or DMSO

We have identified cellulose solvents, comprised of binary mixtures of molecular solvents and ionic liquids that rapidly dissolve cellulose to high concentration and show upper‐critical solution temperature (UCST)‐like thermodynamic behaviour ‐ upon cooling and micro phase‐separation to roughly spherical microparticle particle‐gel mixtures. This is a result of an entropy‐dominant process, controllable by changing temperature, with an overall exothermic regeneration step. However, the initial dissolution of cellulose in this system, from the majority cellulose I allomorph upon increasing temperature, is also exothermic. The mixtures essentially act as ‘thermo‐switchable’ gels. Upon initial dissolution and cooling, micro‐scaled spherical particles are formed, the formation onset and size of which are dependent on the presence of traces of water. Wide‐angle X‐ray scattering (WAXS) and ¹³C cross‐polarisation magic‐angle spinning (CP‐MAS) NMR spectroscopy have identified that the cellulose micro phase‐separates with no remaining cellulose I allomorph and eventually forms a proportion of the cellulose II allomorph after water washing and drying. The rheological properties of these solutions demonstrate the possibility of a new type of cellulose processing, whereby morphology can be influenced by changing temperature.

Room temperature dissolving cellulose with a metal salt hydrate-based deep eutectic solvent

Abundant and renewable cellulose is a potential candidate for petroleum-derived synthetic polymers. However, the efficient dissolution of this material is problematic because of the high cost, severe reaction condition (e.g., high temperature) and environmentally unfriendly (e.g., toxic reagents, and solvent recyclability). Herein, to realize the room temperature dissolution of cellulose with an inexpensive and eco-friendly solvent, we design a novel low-cost deep eutectic solvent that is composed of zinc chloride, water and phosphoric acid for the efficient dissolution of cellulose. This solvent is featured as having both the superior hydrogen bonding acidity and the hydrogen bonding basicity, and thus can act as a hydrogen bond molecular scissors to cleave the hydrogen bonds within cellulose. In this process, microcrystalline cellulose can be easily dissolved in the solvent at room temperature with a dissolution ratio up to 15 wt%. The dissolved cellulose can also be recovered without any derivatization. The universality, recyclability and pilot production of dissolving cellulose using this solvent are also demonstrated. This work provides a new strategy for the design of novel deep eutectic solvent capable of disrupting the hydrogen bonds of cellulose under mild conditions.

Cellulose Dissolution in Mixtures of Ionic Liquids and Dimethyl Sulfoxide: A Quantitative Assessment of the Relative Importance of Temperature and Composition of the Binary Solvent

We studied the dissolution of microcrystalline cellulose (MCC) in binary mixtures of dimethyl sulfoxide (DMSO) and the ionic liquids: allylbenzyldimethylammonium acetate; 1-(2-methoxyethyl)-3-methylimidazolium acetate; 1,8-diazabicyclo [5.4.0]undec-7-ene-8-ium acetate; tetramethylguanidinium acetate. Using chemometrics, we determined the dependence of the mass fraction (in %) of dissolved cellulose (MCC-m%) on the temperature, T = 40, 60, and 80 °C, and the mole fraction of DMSO, χ_DMSO = 0.4, 0.6, and 0.8. We derived equations that quantified the dependence of MCC-m% on T and χ_DMSO. Cellulose dissolution increased as a function of increasing both variables; the contribution of χ_DMSO was larger than that of T in some cases. Solvent empirical polarity was qualitatively employed to rationalize the cellulose dissolution efficiency of the solvent. Using the solvatochromic probe 2,6-dichloro-4-(2,4,6-triphenylpyridinium-1-yl)phenolate (WB), we calculated the empirical polarity E_T(WB) of cellobiose (a model for MCC) in ionic liquid (IL)–DMSO mixtures. The E_T(WB) correlated perfectly with T (fixed χ_DMSO) and with χ_DMSO (fixed T). These results show that there is ground for using medium empirical polarity to assess cellulose dissolution efficiency. We calculated values of MCC-m% under conditions other than those employed to generate the statistical model and determined the corresponding MCC-m% experimentally. The excellent agreement between both values shows the robustness of the statistical model and the usefulness of our approach to predict cellulose dissolution, thus saving time, labor, and material.

Towards a molecular understanding of cellulose dissolution in ionic liquids: anion/cation effect, synergistic mechanism and physicochemical aspects

Cellulose is one of the most abundant bio-renewable materials on the earth and its conversion to biofuels provides an appealing way to satisfy the increasing global energy demand. However, before carrying out the process of enzymolysis to glucose or polysaccharides, cellulose needs to be pretreated to overcome its recalcitrance. In recent years, a variety of ionic liquids (ILs) have been found to be effective solvents for cellulose, providing a new, feasible pretreatment strategy. A lot of experimental and computational studies have been carried out to investigate the dissolution mechanism. However, many details are not fully understood, which highlights the necessity to overview the current knowledge of cellulose dissolution and identify the research trend in the future. This perspective summarizes the mechanistic studies and microscopic insights of cellulose dissolution in ILs. Recent investigations of the synergistic effect of cations/anions and the distinctive structural changes of cellulose microfibril in ILs are also reviewed. Besides, understanding the factors controlling the dissolution process, such as the structure of anions/cations, viscosity of ILs, pretreatment temperature, heating rate, etc., has been discussed from a structural and physicochemical viewpoint. At the end, the existing problems are discussed and future prospects are given. We hope this article would be helpful for deeper understanding of the cellulose dissolution process in ILs and the rational design of more efficient and recyclable ILs.

1D and 2D NMR Spectroscopy of Bonding Interactions within Stable and Phase-Separating Organic Electrolyte-Cellulose Solutions

Organic electrolyte solutions (i.e. mixtures containing an ionic liquid and a polar, molecular co-solvent) are highly versatile solvents for cellulose. However, the underlying solvent-solvent and solvent-solute interactions are not yet fully understood. Herein, mixtures of the ionic liquid 1-ethyl-3-methylimidazolium acetate, the co-solvent 1,3-dimethyl-2-imidazolidinone, and cellulose are investigated using 1D and 2D NMR spectroscopy. The use of a triply-¹³ C-labelled ionic liquid enhances the signal-to-noise ratio for ¹³ C NMR spectroscopy, enabling changes in bonding interactions to be accurately pinpointed. Current observations reveal an additional degree of complexity regarding the distinct roles of cation, anion, and co-solvent toward maintaining cellulose solubility and phase stability. Unexpectedly, the interactions between the dialkylimidazolium ring C² -H substituent and cellulose become more pronounced at high temperatures, counteracted by a net weakening of acetate-cellulose interactions. Moreover, for mixtures that exhibit critical solution behavior, phase separation is accompanied by the apparent recombination of cation-anion pairs.

Improving Cellulose Dissolution in Ionic Liquids by Tuning the Size of the Ions: Impact of the Length of the Alkyl Chains in Tetraalkylammonium Carboxylate

Twenty ionic liquids based on tetraalkylammonium cations and carboxylate anions have been synthesized, characterized, and tested for cellulose dissolution. The amount of cellulose dissolved in these ionic liquids depends strongly on the size of the ions: from 0 to 22 wt % cellulose can be dissolved at 90 °C. The best ionic liquids are less viscous and ammonium carboxylate based ionic liquids can dissolve as much as imidazolium-based ones. The viscosity of an ionic liquid can be decreased by the addition of DMSO as a cosolvent. After the addition of cosolvent, similar amounts of cellulose per ions are reached for most ionic liquids. As observed by rheology, ionic liquids with the longest alkyl chains form a gel when a high amount of cellulose is dissolved; this drastically limits their potential. Molecular simulations and IR spectroscopy have also been used with the aim of understanding how molecular interactions differ between efficient and inefficient ionic liquids.

Thermally Triggered Phase Separation of Organic Electrolyte-Cellulose Solutions

Organic electrolyte solutions (OES)-binary mixtures of an ionic liquid (IL) with a neutral polar aprotic co-solvent-are being recognized as excellent candidate solvents for the dissolution, derivatization, and sustainable processing of cellulose. These solutions exhibit the beneficially combined properties of rapid-to-instantaneous cellulose dissolution, raised thermal stability, and reduced viscosity, compared to cellulose solutions in the parent ILs. Herein, we report the reversible, thermally triggered phase separation of cellulose solutions in 1-ethyl-3-methylimidazolium acetate with 1,3-dimethyl-2-imidazolidinone. In these solutions, cellulose drives the process of phase separation, resulting in a lower, IL-rich layer in which the biopolymer is segregated. In turn, the upper phase is enriched in the neutral co-solvent. We show that the temperature of phase separation can be fine-tuned by modification of mole fractions of IL, co-solvent, and cellulose. This finding holds promise for the design of strategies for separation and solvent recycling in cellulose chemistry.

Direct Observation of Self-Organized Water-Containing Structures in the Liquid Phase and Their Influence on 5-(Hydroxymethyl)furfural Formation in Ionic Liquids

Water-containing organic solutions are widespread reaction media in organic synthesis and catalysis. This type of multicomponent liquid system has a number of unique properties because of the tendency for water to self-organize in mixtures with other liquids. The characterization of these water domains is a challenging task because of their soft and dynamic nature. In the present study, the morphology and dynamics of micrometer- and nanometer-scale water-containing compartments in ionic liquids were directly observed by electron microscopy. A variety of morphologies, including isolated droplets, dense structures, aggregates, and 2D meshworks, have been experimentally detected and studied. Using the developed method, the impact of water on the acid-catalyzed biomass conversion reaction was studied at the microscopic level. The process that produced nanostructured domains in solution led to better yields and higher selectivities compared with reactions involving the bulk system.

Various pretreatments of lignocellulosics

Biomass pretreatment for depolymerizing lignocellulosics to fermentable sugars has been studied for nearly 200 years. Researches have aimed at high sugar production with minimal degradation to inhibitory compounds. Chemical, physico-chemical and biochemical conversions are the most promising technologies. This article reviews the advances and current trends in the pretreatment of lignocellulosics for a prosperous biorefinery.

Beyond a solvent: the roles of 1-butyl-3-methylimidazolium chloride in the acid-catalysis for cellulose depolymerisation

In this report, 1-butyl-3-methylimidazolium chloride ([C4C1im]Cl) is demonstrated to enhance the kinetics of acid-catalysed hydrolysis of 1,4-β-glucans in binary solvent mixtures. [C4C1im]Cl plays other roles in the reaction beyond acting as a solvent for cellulose, as currently accepted. In fact, the presence of the IL increases the Hammett acidity of the catalyst dissolved in the reaction medium. The kinetic data from cellobiose and cellulose hydrolysis directly correlate with the acid strength found for p-toluenesulfonic acid in the different reaction media studied here. The current report identifies neglected, but yet very important phenomena occurring in cellulose depolymerisation.

From cellulose fibrils to single chains: understanding cellulose dissolution in ionic liquids

Continued improvement on the structure of elementary fibrils, simulation of larger elementary fibrils and systematic work on the solution structure of cellulose in ILs are three interacting modules to unravel the mechanism of cellulose dissolution in ILs.