Catalytic Conversion of Alcohols into Carboxylic Acid Salts in Water: Scope, Recycling, and Mechanistic Insights

Half-Sandwich Iridium Complexes: A Recyclable and Stable Catalyst for Dehydrogenation of Alcohols to Carboxylic Acids

A series of acylhydrazone-based N,N-chelate half-sandwich iridium complexes have been synthesized through a facile route in good yields. The dehydrogenation of a series of aromatic and aliphatic primary alcohols to corresponding carboxylic acids has been accomplished catalyzed by the prepared air stable iridium complexes under mild reaction conditions. Carboxylic acids were obtained in high yields under open flask condition with broad substrates and good tolerance to sensitive functional groups. Such a half-sandwich iridium catalyst system exhibited high catalytic activity and stability, and a high TOF of 316.7 h-1 could be achieved with a catalyst loading as low as 0.05 mol %. Furthermore, the sustainable catalyst could be reused at least five times without obviously losing its activity, highlighting its potential application in industry. Molecular structure of iridium complex 1 was confirmed by single-crystal X-ray analysis.

Double Intramolecular 1,2 C-H Addition of o-Methyl Groups To Form Ruthenium Pincer Double Tuck-In Complexes

Ruthenium pincer complexes have a rich history of coordination and reaction chemistries. In this work, we report our discoveries of previously unreported Ru pincer coordination geometries. We found that mono tuck-in κ4-ArPNHPRuLCl complexes react with NaN(SiMe3)2 producing double tuck-in mer-κ5-ArPNHPRuL complexes. Interestingly, when κ4-MesPNHPRuCl is dehydrohalogenated, the resulting double tuck-in complex binds N2, forming the nitrogen complex κ5-MesPNHPRuN2. The mer-κ5-ArPNHPRuL complexes thermally isomerize to the fac-κ5-ArPNHPRuL isomers, which is an uncommon reaction for pincer complexes. The mer-κ5-ArPNHPRuL complexes react with CO and CO2 to form amide κ4-ArPNHPRu(CO)L or carbamate κ5-ArPN(CO2)PRuL complexes, respectively, supporting the hypothesis that the κ4-ArPNPRuL amide intermediates are accessible and reactive.

Oxidation of Organic Compounds Using Water as the Oxidant with H2 Liberation Catalyzed by Molecular Metal Complexes

Oxidation reactions of organic compounds play a central role in both industrial chemical and material synthesis as well as in fine chemical and pharmaceutical synthesis. While traditional laboratory-scale oxidative syntheses have relied on the use of strong oxidizers, modern large-scale oxidation processes preferentially utilize air or pure O₂ as an oxidant, with other oxidants such as hydrogen peroxide, nitric acid, and aqueous chlorine solution also being used in some processes. The use of molecular oxygen or air as an oxidant has been very attractive in recent decades because of the abundance of air and the lack of wasteful byproduct generation. Nevertheless, the use of high-pressure air or, in particular, pure oxygen can lead to serious safety concerns with improper handling and also necessitates the use of sophisticated high-pressure reactors for the processes.Several research groups, including ours, have investigated in recent times the possibility of carrying out catalytic oxidation reactions using water as the formal oxidant, with no added conventional oxidants. Along with the abundant availability of water, these processes also generate dihydrogen gas as the reaction coproduct, which is a highly valuable fuel. Several well-defined molecular metal complexes have been reported in recent years to catalyze these unusual oxidative reactions with water. A ruthenium bipyridine-based PNN pincer complex was reported by us to catalyze the oxidation of primary alcohols to carboxylate salts with alkaline water along with H₂ liberation, followed by reports by other groups using other complexes as catalysts. At the same time, ruthenium-, iridium-, and rhodium-based complexes have been reported to catalyze aldehyde oxidation to carboxylic acids using water. Our group has combined the catalytic aqueous alcohol and aldehyde oxidation activity of a ruthenium complex to achieve the oxidation of biomass-derived renewable aldehydes such as furfural and 5-hydroxymethylfurfural (HMF) to furoic acid and furandicarboxylic acid (FDCA), respectively, using alkaline water as the oxidant, liberating H₂. Ruthenium complexes with an acridine-based PNP ligand have also been employed by our group for the catalytic oxidation of amines to the corresponding lactams, or to carboxylic acids via a deaminative route, using water. Similarly, we also reported molecular complexes for the catalytic Markovnikov oxidation of alkenes to ketones using water, similar to Wacker-type oxidation, which, however, does not require any terminal oxidant and produces H₂ as the coproduct. At the same time, the oxidation of enol ethers to the corresponding esters with water has also been reported. This account will highlight these recent advances where water was used as an oxidant to carry out selective oxidation reactions of organic compounds, catalyzed by well-defined molecular complexes, with H₂ liberation. The oxidation of alcohols, aldehydes, amines, alkenes, and enol ethers will be discussed to provide an outlook toward other functional groups' oxidation. We hope that this will aid researchers in devising other oxidative dehydrogenative catalytic systems using water, complementing traditional oxidative processes involving strong oxidants and molecular oxygen.

Tuning the selectivity in iridium-catalyzed acceptorless dehydrogenative coupling of primary alcohols

An acceptorless dehydrogenative coupling of primary alcohols to carboxylic acids/carboxylates, esters, and Guerbet alcohols (via both homo- and cross-β-alkylation of the alcohols) in the presence of an N-heterocyclic carbene iridium(I) catalyst was developed under aerobic conditions. The product selectivity can be easily tuned among the products with a single catalyst through simple modification of the reaction conditions, such as the catalyst and base amounts, the choice of base, and the reaction temperature.

Experimental insights into catalytic oxidation of 1,6-hexanediol to ε-caprolactone over (p-cymene)RuCl2(L) complexes in non-polar media

The activity-pocket site dimension (θc) dependence of (p-cymene)RuCl2(L) supports associative interchange mechanism for 1,6-hexandiol oxidation to ε-caprolactone. Methyl isobutyl carbinol, a H-accepting product, reacts with Ru, causing deactivation.

Bulky PNP ligands blocking metal-ligand cooperation allow for isolation of Ru(0), and lead to catalytically active Ru complexes in acceptorless alcohol dehydrogenation

We synthesized two 4Me-PNP ligands which block metal-ligand cooperation (MLC) with the Ru center and compared their Ru complex chemistry to their two traditional analogues used in acceptorless alcohol dehydrogenation catalysis. The corresponding 4Me-PNP complexes, which do not undergo dearomatization upon addition of base, allowed us to obtain rare, albeit unstable, 16 electron mono CO Ru(0) complexes. Reactivity with CO and H 2 allows for stabilization and extensive characterization of bis CO Ru(0) 18 electron and Ru(II) cis and trans dihydride species that were also shown to be capable of C(sp2)-H activation. Reactivity and catalysis are contrasted to non-methylated Ru(II) species, showing that an MLC pathway is not necessary, with dramatic differences in outcomes during catalysis between i Pr and t Bu PNP complexes within each of the 4Me and non-methylated backbone PNP series being observed. Unusual intermediates are characterized in one of the new and one of the traditional complexes, and a common catalysis deactivation pathway was identified.

Recent Development in the Synthesis and Catalytic Application of Iridacycles

Cyclometallated complexes are well-known and have found many applications. This article provides a short review on the progress made in the synthesis and application to catalysis of cyclometallated half-sandwich Cp*Ir(III) complexes (Cp*: pentamethylcyclopentadienyl) since 2017. Covered in the review are iridacycles featuring conventional C,N chelates and less common metallocene and carbene-derived C,N and C,C ligands. This is followed by an overview of the studies of their applications in catalysis ranging from asymmetric hydrogenation, transfer hydrogenation, hydrosilylation to dehydrogenation.

Enantioselective direct, base-free hydrogenation of ketones by a manganese amido complex of a homochiral, unsymmetrical P–N–P′ ligand

Base-free direct hydrogenation of ketones using a Mn(PNP′)(CO)₂ complex is more enantioselective than that of a related base-activated iron complex.

Direct Oxidation of Primary Alcohols to Carboxylic Acids

Oxidation of primary alcohols to carboxylic acids is a fundamental transformation in organic chemistry, yet despite its simplicity, extensive use, and relationship to pH, it remains a subject of active research for synthetic organic chemists. Since 2013, a great number of new methods have emerged that utilize transition-metal compounds as catalysts for acceptorless dehydrogenation of alcohols to carboxylates. The interest in this reaction is explained by its atom economy, which is in accord with the principles of sustainability and green chemistry. Therefore, the methods for the direct synthesis of carboxylic acids from alcohols is ripe for a modern survey, which we provide in this review.

1 Introduction

2 Thermodynamics of Primary Alcohol Oxidation

3 Oxometalate Oxidation

4 Transfer Dehydrogenation

5 Acceptorless Dehydrogenation

6 Electrochemical Methods

7 Outlook

Synthesis of Dicarboxylic Acids from Aqueous Solutions of Diols with Hydrogen Evolution Catalyzed by an Iridium Complex

A catalytic system for the synthesis of dicarboxylic acids from aqueous solutions of diols accompanied by the evolution of hydrogen was developed. An iridium complex bearing a functional bipyridonate ligand with N,N-dimethylamino substituents exhibited a high catalytic performance for this type of dehydrogenative reaction. For example, adipic acid was synthesized from an aqueous solution of 1,6-hexanediol in 97 % yield accompanied by the evolution of four equivalents of hydrogen by the present catalytic system. It should be noted that the simultaneous production of industrially important dicarboxylic acids and hydrogen, which is useful as an energy carrier, was achieved. In addition, the selective dehydrogenative oxidation of vicinal diols to give α-hydroxycarboxylic acids was also accomplished.

Recent Progress with Pincer Transition Metal Catalysts for Sustainability

Our planet urgently needs sustainable solutions to alleviate the anthropogenic global warming and climate change. Homogeneous catalysis has the potential to play a fundamental role in this process, providing novel, efficient, and at the same time eco-friendly routes for both chemicals and energy production. In particular, pincer-type ligation shows promising properties in terms of long-term stability and selectivity, as well as allowing for mild reaction conditions and low catalyst loading. Indeed, pincer complexes have been applied to a plethora of sustainable chemical processes, such as hydrogen release, CO2 capture and conversion, N2 fixation, and biomass valorization for the synthesis of high-value chemicals and fuels. In this work, we show the main advances of the last five years in the use of pincer transition metal complexes in key catalytic processes aiming for a more sustainable chemical and energy production.

Catalytic oxidations by dehydrogenation of alkanes, alcohols and amines with defined (non)-noble metal pincer complexes

The present review highlights the latest developments in the field of transition metal-catalysed oxidations, in particular C–C–, C–O– and C–N-bond dehydrogenations.

A cyclometalated Ir(III)-NHC complex as a recyclable catalyst for acceptorless dehydrogenation of alcohols to carboxylic acids

In this work, we have synthesized two new [C, C] cyclometalated Ir(iii)-NHC complexes, [IrCp*(C∧C:NHC)Br](1a,b), [Cp* = pentamethylcyclopentadienyl; NHC = (2-flurobenzyl)-1-(4-methoxyphenyl)-1H-imidazoline-2-ylidene (a); (2-flurobenzyl)-1-(4-formylphenyl)-1H-imidazoline-2-ylidene (b)] via intramolecular C-H bond activation. The molecular structure of complex 1a was determined by X-ray single crystal analysis. The catalytic potentials of the complexes were explored for acceptorless dehydrogenation of alcohols to carboxylic acids with concomitant hydrogen gas evolution. Under similar experimental conditions, complex 1a was found to be slightly more efficient than complex 1b. Using 0.1 mol% of complex 1a, good-to-excellent yields of carboxylic acids/carboxylates have been obtained for a wide range of alcohols, both aliphatic and aromatic, including those involving heterocycles, in a short reaction time with a low loading of catalyst. Remarkably, our method can produce benzoic acid from benzyl alcohol on a gram scale with a catalyst-to-substrate ratio as low as 1 : 5000 and exhibit a TON of 4550. Furthermore, the catalyst could be recycled at least three times without losing its activity. A mechanism has been proposed based on controlled experiments and in situ NMR study.

Highly Efficient N-Heterocyclic Carbene/Ruthenium Catalytic Systems for the Acceptorless Dehydrogenation of Alcohols to Carboxylic Acids: Effects of Ancillary and Additional Ligands

The transition-metal-catalyzed alcohol dehydrogenation to carboxylic acids has been identified as an atom-economical and attractive process. Among various catalytic systems, Ru-based systems have been the most accessed and investigated ones. With our growing interest in the discovery of new Ru catalysts comprising N-heterocyclic carbene (NHC) ligands for the dehydrogenative reactions of alcohols, we designed and prepared five NHC/Ru complexes ([Ru]-1–[Ru]-5) bearing different ancillary NHC ligands. Moreover, the effects of ancillary and additional ligands on the alcohol dehydrogenation with KOH were thoroughly explored, followed by the screening of other parameters. Accordingly, a highly active catalytic system, which is composed of [Ru]-5 combined with an additional NHC precursor L5, was discovered, affording a variety of acid products in a highly efficient manner. Gratifyingly, an extremely low Ru loading (125 ppm) and the maximum TOF value until now (4800) were obtained.

The Role of Proton Shuttles in the Reversible Activation of Hydrogen via Metal-Ligand Cooperation

The reversible activation of H₂ via a pathway involving metal-ligand cooperation (MLC) is proposed to be important in many transition metal catalyzed hydrogenation and dehydrogenation reactions. Nevertheless, there is a paucity of experimental information probing the mechanism of this transformation. Here, we present an in-depth kinetic study of the 1,2-addition of H₂ via an MLC pathway to the widely used iron catalyst [(^iPrPNP)FeH(CO)] (1) (^iPrPNP = N(CH₂CH₂PⁱPr₂)₂^-). We report one of the first experimental demonstrations of an enhancement in rate for the activation of H₂ using protic additives, which operate as "proton shuttles". Our results indicate that proton shuttles need to be able to both simultaneously donate and accept a proton, and the best shuttles are molecules that are strong hydrogen bond donors but sufficiently weak acids to avoid deleterious protonation of the transition metal complex. Additionally, comparison of the rate of H₂ activation via an MLC pathway between 1 and two widely used ruthenium catalysts enables more general conclusions about the role of the metal, ancillary ligand, and proton shuttles in H₂ activation. The results of this study provide guidance about the design of catalysts and additives to promote H₂ activation via an MLC pathway.

Bidentate Ru(ii)-NC complexes as catalysts for the dehydrogenative reaction from primary alcohols to carboxylic acids

Complex 1 is active for alcohol dehydrogenative reactions, and two critical intermediates were isolated and characterized.

Highly active bidentate N-heterocyclic carbene/ruthenium complexes performing dehydrogenative coupling of alcohols and hydroxides in open air

A highly active and robust bidentate NHC/Ru complex for the acceptorless dehydrogenative coupling of alcohols and hydroxides in open air.

Catalyzed or non-catalyzed: chemoselectivity of Ru-catalyzed acceptorless dehydrogenative coupling of alcohols and amines via metal–ligand bond cooperation and (de)aromatization

The mechanistic origin of the chemoselectivity for Ru-catalyzed acceptorless coupling of amines and alcohols.

Zinc Oxide-Catalyzed Dehydrogenation of Primary Alcohols into Carboxylic Acids

Zinc oxide has been developed as a catalyst for the dehydrogenation of primary alcohols into carboxylic acids and hydrogen gas. The reaction is performed in mesitylene solution in the presence of potassium hydroxide, followed by workup with hydrochloric acid. The transformation can be applied to both benzylic and aliphatic primary alcohols and the catalytically active species was shown to be a homogeneous compound by a hot filtration test. Dialkylzinc and strongly basic zinc salts also catalyze the dehydrogenation with similar results. The mechanism is believed to involve the formation of a zinc alkoxide which degrades into the aldehyde and a zinc hydride. The latter reacts with the alcohol to form hydrogen gas and regenerate the zinc alkoxide. The degradation of a zinc alkoxide into the aldehyde upon heating was confirmed experimentally. The aldehyde can then undergo a Cannizzaro reaction or a Tishchenko reaction, which in the presence of hydroxide leads to the carboxylic acid.

Dehydrogenative Transformation of Alcoholic Substrates in Aqueous Media Catalyzed by an Iridium Complex Having a Functional Ligand with α-Hydroxypyridine and 4,5-Dihydro-1H-imidazol-2-yl Moieties

A new catalytic system that employs water as an environmentally friendly solvent for the dehydrogenative oxidation of alcohols and lactonization of diols has been developed. In this catalytic system, a water-soluble dicationic iridium complex having a functional ligand that comprises α-hydroxypyridine and 4,5-dihydro-1H-imidazol-2-yl moieties exhibits high catalytic performance. For example, the catalytic dehydrogenative oxidation of 1-phenylethanol in the presence of 0.25 mol % of the iridium catalyst and base under reflux in water proceeded to give acetophenone in 92% yield. Additionally, under similar reaction conditions, the iridium-catalyzed dehydrogenative lactonization of 1,2-benzenedimethanol gave phthalide in 98% yield.

Dehydrogenation of alcohols and polyols from a hydrogen production perspective

The production of hydrogen from renewable resources is still a major challenge in our way to reach a foreseen hydrogen economy. Abstracting the hydrogen contained in alcohols by means of acceptorless dehydrogenation reactions has emerged as a viable method with high potential. This is particularly true when applied to bio-based alcohols such as ethanol, glycerol or sugars, whose hydrogen extrusion is covered in this contribution. A general overview of the development of aceptorless alcohol dehydrogenation reactions and its potential implementation into future biorefineries are discussed.

Hydrogenation of carbonyl compounds of relevance to hydrogen storage in alcohols

Alcohols are a promising source for the sustainable production of hydrogen that may also serve as rechargeable liquid organic hydrogen carriers (LOHCs). Metal-catalyzed acceptorless dehydrogenation of alcohols produces carbonyl derivatives as H2-depleted by-products, which by means of a hydrogenation reaction can be reconverted to the initial alcohols. Hence, reversible H2-storage systems based on pairs of secondary alcohols/ketones and primary alcohols/carboxylic acid derivatives may be envisaged. In this contribution, the hydrogenation of carbonyl derivatives, including ketones, esters, amides and carboxylic acids, is reviewed from the perspective of the hydrogen storage in alcohols.

Iron catalyzed oxidation of benzylic alcohols to benzoic acids

The bidentate N,O-ligands phenol-pyrazole (HL1), naphthol-pyrazole (HL2) and the commercially available ligand 5-methylphenol-benzotriazole (HL3) were used for the synthesis of novel iron(iii) complexes. The mononuclear iron complexes [FeCl(L1)2] (1), [FeCl(L2)2] (2) and [FeCl(L3)2] (3) are stable to air and moisture, both in the solid state as well as in solution, while the dinuclear, μ-oxido bridged complex [{Fe(L1)2}2(μ-O)] (1a) is air sensitive. All four complexes 1, 2, 3 and 1a were investigated for their catalytic activity in the direct one-pot oxidation of primary alcohols to carbonic acids with 30% aq. hydrogen peroxide (H2O2) as the oxidation agent. The activity in oxidation reactions of the isolated, mononuclear complexes 1-3 was further compared to their in situ prepared analogues IS1-3. Experimentally obtained results indicate a tendency of higher activity for the oxidation of primary alcohols for the in situ prepared complexes. In conclusion, the oxidation of aromatic primary alcohols to carboxylic acids using isolated iron(iii) complexes and in situ generated complexes in the presence of H2O2 results in good to high yields. The reaction is straight-forward, clean and generates water as the only by-product.