Porous Ionic Polymers as a Robust and Efficient Platform for Capture and Chemical Fixation of Atmospheric CO2

Zn-MOF as a Single Catalyst with Dual Lewis Acidic and Basic Reaction Sites for CO2 Fixation

Continuous increase in carbon dioxide (CO2) emissions are causing imbalances in the environment, which impact biodiversity and human health. The conversion of CO2 to cyclic carbonates by means of metal-organic frameworks (MOFs) as a heterogeneous catalyst is a prominent strategy for rectifying this imbalance. Herein, we have developed nitrogen-rich Zn (II) based metal-organic framework, [Zn(CPMT)(bipy)]n (CPMT = 1-(4-carboxyphenyl)-5-mercapto-1H-tetrazole; bipy = 4,4'-bipyridine), synthesized via a mixed ligand strategy. This Zn-MOF showed high chemical stability in both acidic and basic conditions, and in organic solvents for a long time. On account of the concurrent presence of acid-base active sites and strong chemical stability under abrasive conditions, this Zn-MOF was employed as an effective catalyst for the coupling of CO2 and epoxides, under atmospheric pressure, mild temperature, and neat conditions. This Zn-MOF shows remarkable activity by producing high yields of epichlorohydrin carbonate (98%) and styrene carbonate (82%) at atmospheric CO2 pressure, 70 °C temperature, and 24 h reaction time, with turnover numbers (TON) of 217 and 181, respectively. The Zn-MOF could be reused for up to seven cycles with structural and framework integrity. Overall, this work demonstrates the synthesis of a novel and highly efficient MOF for CO2 conversion.

Application of Fluorescent Carbon Dots as Catalysts for the Ring-Opening Reaction of Epoxides

Considering the increased anthropogenic emissions of CO2 into the atmosphere, it is important to develop economic incentives for the use of CO2 capture methodologies. The conversion of CO2 into heterocyclic carbonates shows significant potential. However, there is a need for suitable organocatalysts to reach the required efficiency for these reactions. Given this, there has been an increasing focus on the development of organocatalytic systems consisting of a nucleophile and a hydrogen bond donor (HBD) so that CO2 conversion can occur in ambient conditions. In this work, we evaluated the potential of fluorescent carbon dots (CDs) as catalytic HBDs in the ring-opening reaction of epoxides, which is typically the rate-limiting step of CO2 conversion reactions into heterocyclic carbonates. The obtained results demonstrated that the CDs had a relevant catalytic effect on the studied model reaction, with a rate constant of 0.2361 ± 0.008 h-1, a percentage of reactant conversion of 70.8%, and a rate constant enhancement of 32.2%. These results were better than the studied alternative molecular HBDs. Thus, this study demonstrated that CDs have the potential to be used as HBDs and employed in organocatalyzed CO2 conversion into value-added products.

Exploring the Effect of Different Secondary Building Units as Lewis Acid Sites in MOF Materials for the CO2 Cycloaddition Reaction

In order to explore the catalytic effect of different Lewis acid sites (LASs) in the CO2 cycloaddition reaction, different secondary building units and N-rich organic ligand 4,4',4″-s-triazine-1,3,5-triyltri-p-aminobenzoate were assembled to construct six reported MOF materials: [Cu3(tatab)2(H2O)3]·8DMF·9H2O (1), [Cu3(tatab)2(H2O)3]·7.5H2O (2), [Zn4O(tatab)2]·3H2O·17DMF (3), [In3O(tatab)2(H2O)3](NO3)·15DMA (4), [Zr6O4(OH)7(tatab)(Htatab)3(H2O)3]·xGuest (5), and [Zr6O4(OH)4(tatab)4(H2O)3]·xGuest (6) (DMF = N,N-dimethylformamide, and DMA = N,N-dimethylacetamide). Large pore sizes of compound 2 enhance the concentration of substrates, and the multi-active sites inside its framework synergistically promote the process of the CO2 cycloaddition reaction. Such advantages endow compound 2 with the best catalytic performance among the six compounds and surpass many of the reported MOF-based catalysts. Meanwhile, the comparison of the catalytic efficiency indicated that Cu-paddlewheel and Zn4O display better catalytic performances than In3O and Zr6 cluster. The experiments investigate the catalytic effects of LAS types and prove that it is feasible to improve CO2 fixation property by introducing multi-active sites into MOFs.

Recent Progress in the Integration of CO2 Capture and Utilization

CO₂ emission is deemed to be mainly responsible for global warming. To reduce CO₂ emissions into the atmosphere and to use it as a carbon source, CO₂ capture and its conversion into valuable chemicals is greatly desirable. To reduce the transportation cost, the integration of the capture and utilization processes is a feasible option. Here, the recent progress in the integration of CO₂ capture and conversion is reviewed. The absorption, adsorption, and electrochemical separation capture processes integrated with several utilization processes, such as CO₂ hydrogenation, reverse water-gas shift reaction, or dry methane reforming, is discussed in detail. The integration of capture and conversion over dual functional materials is also discussed. This review is aimed to encourage more efforts devoted to the integration of CO₂ capture and utilization, and thus contribute to carbon neutrality around the world.

Organocatalytic Polymers from Affordable and Readily Available Building Blocks for the Cycloaddition of CO2 to Epoxides

The catalytic cycloaddition of CO₂ to epoxides to afford cyclic carbonates as useful monomers, intermediates, solvents, and additives is a continuously growing field of investigation as a way to carry out the atom-economic conversion of CO₂ to value-added products. Metal-free organocatalytic compounds are attractive systems among various catalysts for such transformations because they are inexpensive, nontoxic, and readily available. Herein, we highlight and discuss key advances in the development of polymer-based organocatalytic materials that match these requirements of affordability and availability by considering their synthetic routes, the monomers, and the supports employed. The discussion is organized according to the number (monofunctional versus bifunctional materials) and type of catalytically active moieties, including both halide-based and halide-free systems. Two general synthetic approaches are identified based on the postsynthetic functionalization of polymeric supports or the copolymerization of monomers bearing catalytically active moieties. After a review of the material syntheses and catalytic activities, the chemical and structural features affecting catalytic performance are discussed. Based on such analysis, some strategies for the future design of affordable and readily available polymer-based organocatalysts with enhanced catalytic activity under mild conditions are considered.

Functional Porous Ionic Polymers as Efficient Heterogeneous Catalysts for the Chemical Fixation of CO2 under Mild Conditions

The development of efficient and metal-free heterogeneous catalysts for the chemical fixation of CO₂ into value-added products is still a challenge. Herein, we reported two kinds of polar group (−COOH, −OH)-functionalized porous ionic polymers (PIPs) that were constructed from the corresponding phosphonium salt monomers (v-PBC and v-PBH) using a solvothermal radical polymerization method. The resulting PIPs (POP-PBC and POP-PBH) can be used as efficient bifunctional heterogeneous catalysts in the cycloaddition reaction of CO₂ with epoxides under relatively low temperature, ambient pressure, and metal-free conditions without any additives. It was found that the catalytic activities of the POP-PBC and POP-PBH were comparable with the homogeneous catalysts of Me-PBC and PBH and were higher than that of the POP-PPh₃-COOH that was synthesized through a post-modification method, indicating the importance of the high concentration catalytic active sites in the heterogeneous catalysts. Reaction under low CO₂ concentration conditions showed that the activity of the POP-PBC (with a conversion of 53.8% and a selectivity of 99.0%) was higher than that of the POP-PBH (with a conversion of 32.3% and a selectivity of 99.0%), verifying the promoting effect of the polar group (−COOH group) in the porous framework. The POP-PBC can also be recycled at least five times without a significant loss of catalytic activity, indicating the high stability and robustness of the PIPs-based heterogeneous catalysts.

One-pot construction of nitrogen-rich polymeric ionic porous networks for effective CO2 capture and fixation

Facile preparation of ionic porous networks (IPNs) with large and permanent porosity is highly desirable for CO₂ capture and transformation but remains a challenge. Here we report a one-pot base-mediated construction of nitrogen-rich IPNs through a combination of nucleophilic substitution and quaternisation chemistry from H-imidazole. This strategy, as proven by the model reactions of 1H-imidazole or 1-methyl-1H-imidazole with cyanuric chloride, allows for fine regulation of porosity and physicochemical properties, leading to nitrogen-rich IPNs featuring abundant ionic units and radicals. The as-prepared networks, termed IPN-CSUs, efficiently capture CO₂ (80.1 cc g^-1 at 273 K/1 bar) with an ideal CO₂/N₂ selectivity of 139.7. They can also effectively catalyse the cycloaddition reaction between CO₂ and epoxides with high yields of up to 99% under mild conditions (0.1 MPa, 298 K), suggesting their possible applications in the fields of both selective molecular separation and conversion. Unlike the previously known strategies generally involving single coupling chemistry, our strategy combining two coupling routes in one pot appears to be unique and potentially applicable to other building blocks.

Anchoring Ag(I) into Nitro-Functionalized Metal-Organic Frameworks: Effectively Catalyzing Cycloaddition of CO2 with Propargylic Alcohols under Mild Conditions

Carboxylative cyclization of propargylic alcohols with CO₂ is significant in synthetic chemistry, but harsh conditions are often needed according to reported results. Herein, a new stable nitro-functionalized metal-organic framework (MOF) of {[Co₃(L)₂(bpy)₄(H₂O)₂]·DMF·H₂O·bpy}_n (1) was fabricated through the solvothermal reaction, which exhibited excellent stability in acid and basic solutions. Owing to the porous structure, unsaturated metal sites, and uncoordinated 4,4'-bpy ligands, 1 can serve as an excellent platform for catalytic applications. Hence, Ag(I) ions were incorporated in 1 through a postsynthetic method, and the as-synthesized Ag-1 catalyst with low metal loading (0.64 mol %) displayed excellent catalytic performance in the chemical fixation of CO₂ with alkynols under room temperature and atmospheric pressure. The results of ¹H NMR analyses further confirmed that Ag-1 can efficiently activate hydroxyl groups and promote the reaction. Moreover, the turnover frequency (TOF) of the Ag-1 catalyst can reach 262 h^-1 in a short period of time, which is a high TOF value among the state-of-the-art MOF-based catalysts for catalyzing cycloaddition of CO₂ with propargylic alcohols.

Mechanochemical Process to Construct Porous Ionic Polymers by Menshutkin Reaction

The synthesis of porous ionic polymers (PIPs) via the Menshutkin reaction is intriguing because the reaction works smoothly in catalyst-free condition with 100 % atom utilization. However, the rotation of methane site, nonrigid knots, and charge interaction all may cause collapses of the channel, which is detrimental to the synthesis PIP in solid-state conditions. In this work, an inorganic salt (NaBr, NaCl: pollution-free and easy to recycle) was rationally chosen as the hard template and effectively prevented the intermolecular packing. Moreover, the increased surface area dramatically promoted the catalytic activity of PIP for cyclic carbonate synthesis. This work provides a green and efficient strategy to construct PIPs via the Menshutkin reaction.

Azo-Functionalized Zirconium-Based Metal-Organic Polyhedron as an Efficient Catalyst for CO2 Fixation with Epoxides

Chemical fixation of CO₂ as C1 source at ambient temperature and low pressure is an energy-saving way to make use of the green-house gas, but it still remains a challenge since efficient catalyst with high catalytic active sites is required. Here, a novel monoclinic azo-functionalized Zr-based metal-organic polyhedron (Zr-AZDA) has been prepared and applied in CO₂ fixation with epoxides. The inherent azo groups not only endow Zr-AZDA with good solubilization, but also act as basic sites to enrich CO₂ showing efficient synergistic catalysis as confirmed by TPD-CO₂ analysis. XPS results demonstrate that the Zr active sites in Zr-AZDA possess suitable Lewis acidity, which satisfies both substrates activation and products desorption. DFT calculation indicates the energy barrier of the rate-determining step in CO₂ cycloaddition could be reduced remarkably (by ca. 60.9 %) in the presence of Zr-AZDA, which may rationalize the mild and efficient reaction condition employed (80 °C and 1 atm of CO₂ ). The work provides an effective multi-functional cooperative method for improvement of CO₂ cycloaddition.

Phosphorus containing porous organic polymers: synthetic techniques and applications in organic synthesis and catalysis

The phosphorus-containing porous organic polymer is a trending material for the synthesis of heterogeneous catalysts. Decades of investigations have established phosphines as versatile ligands in homogeneous catalysis. Recently, phosphine-based heterogeneous catalysts were synthesized to exploit the same electronic properties while leveraging extra stability and reusability. In the last few decades, the catalysts were applied in diverse organic transformations, including hydroformylation, hydrogenation, C-C, C-N and C-X coupling, hydrosilylation, oxidative-carbonylation reactions, and so on. However, even though these polymers possess a multifunctional character, they face multiple synthetic issues in controlling the pore size, increasing the surface area, and creating a single type of active site. This review summarizes the developments in this field over the last few decades, highlighting the current limitation and future scope.

Tris-imidazolinium-based porous poly(ionic liquid)s as an efficient catalyst for decarboxylation of cyclic carbonate to epoxide

A series of imidazolinium-based porous poly(ionic liquid)s (PILs) with different anions prepared by free-radical copolymerization of an arene-bridged tris-vinylimidazolium salt and divinylbenzene (DVB) were constructed. The as-prepared PILs were characterized by BET, SEM, TEM, TGA and Elemental Analysis (EA), and the results showed that they had plentiful ionic sites, and abundant and stable mesopores. In particular, the density of ionic sites and pore structure of PILs could be controlled by adjusting the content of DVB. Moreover, the PILs were used as efficient heterogeneous catalysts for the decarboxylation of cyclic carbonates to epoxides for the first time. Results showed that the catalytic activity of PILs was positively correlated with the nucleophilicity of the anions in PILs, and PDVB-[PhTVIM]Cl-1 with a chloride anion-enriched skeleton displayed the best catalytic performance. Without any solvent or cocatalyst, PDVB-[PhTVIM]Cl-1 achieved a TOF value of 108.1 h-1 and the yield of butylene oxide of 89.6%, which was even better than the homogeneous IL-based catalysts (TOF value: 8.7 h-1) that had been previously reported. Meanwhile, PDVB-[PhTVIM]Cl-1 also exhibited excellent recyclability and substrate compatibility.

Theoretical Insights into the Effect of Cations, Anions, and Water on Fixation of CO2 Catalyzed by Different Ionic Liquids

Chemical fixation of CO₂ is an efficient means for decreasing amount of CO₂ in the atmosphere. One of promising technologies is the cycloaddition of CO₂ with epoxides to synthesize cyclic carbonates. In this reaction, ionic liquid (IL) catalysts show versatile and unique advantages. However, the reaction mechanism using ILs is not clear. In this work, a detailed theoretical investigation was performed by DFT calculations. The energetic profile shows that the reaction consists of three steps, with the ring-opening step being the rate-determining step. Based on the results, effects of cations, anions and water were calculated. Cations show strong hydrogen bonding interactions with epoxides, which decreases the energy barrier of the ring-opening step, indicating that hydrogen bonds play a positive role in promoting the reaction. The effect of anions was evaluated by nucleophilicity index (N_Nu ); anions with a larger N_Nu (stronger nucleophilicity) value show lower energy barriers. The influence of water was investigated by implicit and explicit models. Compared with the solvent-free case, water as an implicit solvent decreases the energy barriers through polarization with epoxides. In the explicit solvent model, the water molecules form new hydrogen bonds with epoxides and cations, which can efficiently reduce the energy barriers. The result indicates that there is a new synergic catalytic mechanism, in which the water acts not only as solvent but also as a catalyst in the reaction. Supporting experiments further confirm the calculation results.

Crosslinked Resin-Supported Bifunctional Organocatalyst for Conversion of CO2 into Cyclic Carbonates

The development of solvent-free, metal-free, recyclable organic catalysts is required for the current chemical fixation of carbon dioxide converted into cyclic carbonates. With the goal of reducing the cost, time, and energy consumption for the coupling reaction of CO₂ and epoxides, a series of highly active heterogeneous catalysts, based on a thiourea and quaternary ammonium salt system, are synthesized by using a thiol-ene click reaction under ultraviolet light. Benefitting from synergistic interactions of the electrophilic center (thiourea) and the nucleophilic site (ammonium bromide), the catalysts exhibit excellent catalytic selectivity (99 %) for the cycloaddition of carbon dioxide with a diverse range of epoxides under mild conditions (1.2 MPa, 100 °C). Moreover, the catalyst can be easily recycled by facile filtration and reused for 5 times without noticeable loss of activity and selectivity. This work provides a potential heterogeneous catalyst for the conversion of carbon dioxide into high value-added chemicals with the combined advantages of low cost, easy recovery, and satisfactory catalytic properties.

Secondary Sphere Effects on Porous Polymeric Organocatalysts for CO2 Transformations: Subtle Modifications Resulting in Superior Performance

Albeit harnessing secondary sphere interactions to exert control over the reaction outcomes has primarily been applied to enzymatic and organometallic catalysis, there are seldom any studies that introduce outer-sphere modifiers into organocatalysts. This is even less in the corresponding heterogeneous catalytic system. In this contribution, we experimentally and computationally investigate the role of secondary effects in the reactivity of bromide anions toward CO₂ transformations. Six pyridinium cationic porous frameworks have been synthesized and fully characterized. Structure-activity relationships and kinetics show that the type and the location of the substituents on the cationic framework have a significant impact on the nucleophilic reactivity of their bromide counter anion. Specifically, the attachment of amine substituent to the ortho position relative to a pyridinium motif produces a remarkably efficient catalyst for CO₂ transformation, by a factor of six times greater in comparison to the pristine pyridinium-based polymer. The hydrogen-bond-interaction-promoted reagent activation and enhanced delocalization ability of bromide counter anion are believed to be the key to driving the reaction toward CO₂ utilization. These observations, therefore, champion the leverage of secondary interaction for optimizing the reactivity of organocatalysts.

Removal of anionic hexavalent chromium and methyl orange pollutants by using imidazolium-based mesoporous poly(ionic liquid)s as efficient adsorbents in column

Poly(ionic liquid)s (PILs) are attractive for their various applications, but the use of porous PILs have rarely been reported in anionic pollutants removal via ion-exchange by column. Herein, we report a serial of crosslinked imidazolium-based mesoporous PILs with Cl^- and Br^- as anions for hexavalent chromium (Cr(VI)) and methyl orange (MO) removal. Among them, PDVIm-Cl-SCD, from the free-radical polymerization of a dicationic monomer (N,N'-methylene-bis(1-(3-vinylimidazolium)) chloride, DVIm-Cl) and further supercritical carbon dioxide drying (SCD), displayed a very high sorption capacity (328.2 mg g^-1 at 25 °C) and excellent utilization of adsorption sites (UOA, 86.2%) towards Cr(VI), and an unprecedentedly high sorption capacity (1615.0 mg g^-1 at 25 °C) with a UOA of 67.4% to MO. Moreover, PDVIm-Cl-SCD also exhibited a broad pH range, excellent regeneration and remarkable reusability. Regarding to Cr(VI) removal, the volume of saturated KCl aqueous used for regenerating the Cr(VI) saturated PDVIm-Cl-SCD column (7.5-9.5 mL) was much less than the volume of treated Cr(VI) solution (160-200 mL). For MO removal, the volume of saturated NaCl solution used for regenerating the MO saturated PDVIm-Cl-SCD column (10.5-13.5 mL) was also much less than the volume of treated MO solution (220-235 mL), implying the great potential of PDVIm-Cl-SCD in sustainable wastewater treatment.

Triazine-based Organic Polymer-catalysed Conversion of Epoxide to Cyclic Carbonate under Ambient CO2 Pressure

In this work we have achieved epoxide to cyclic carbonate conversion using a metal-free polymeric catalyst under ambient CO₂ pressure (1.02 atm) using a balloon setup. The triazine containing polymer (CYA-ANIS) was prepared from cyanuric chloride (CYA-Cl) and o-dianisidine (ANIS) in anhydrous DMF as solvent by refluxing under the N₂ gas environment. The presence of triazine and amine functional groups in the polymer results in the adsorption of CO₂ up to 7 cc/g at 273 K. This inspired us to utilize the polymer for the conversion of a series of functionalised epoxides into their corresponding cyclic carbonates in the presence of tetrabutyl ammonium iodide (TBAI) as co-catalyst. The product has wide range of applications like solvent in lithium ion battery, precursor for polycarbonate, etc. The catalyst was efficient for the conversion of different mono and di-epoxides into their corresponding cyclic carbonates under atmospheric pressure in the presence of TBAI as co-catalyst. The study indicates that epoxide attached with electron withdrawing groups (like, CH₂ Cl, glycidyl ether, etc.) displayed better conversion compared to simple alkane chain attached epoxides. This is mainly due to the stabilization of electron rich intermediates produced during the reaction (e. g. epoxide ring opening or CO₂ incorporation into the halo-alkoxide anion). This catalyst mixture was capable to maintain its reactivity up to five cycles without losing its activity. Post catalytic characterization clearly supports the heterogeneous and recyclable nature of the catalyst.

Phosphonium-Based Porous Ionic Polymer with Hydroxyl Groups: A Bifunctional and Robust Catalyst for Cycloaddition of CO2 into Cyclic Carbonates

The integration of synergic hydrogen bond donors and nucleophilic anions that facilitates the ring-opening of epoxide is an effective way to develop an active catalyst for the cycloaddition of CO₂ with epoxides. In this work, a new heterogeneous catalyst for the cycloaddition of epoxides and CO₂ into cyclic carbonates based on dual hydroxyls-functionalized polymeric phosphonium bromide (PQPBr-2OH) was presented. Physicochemical characterizations suggested that PQPBr-2OH possessed large surface area, hierarchical pore structure, functional hydroxyl groups, and high density of active sites. Consequently, it behaved as an efficient, recyclable, and metal-free catalyst for the additive and solvent free cycloaddition of epoxides with CO₂. Comparing the activity of PQPBr-2OH with that of the reference catalysts based on mono and non-hydroxyl functionalized polymeric phosphonium bromides suggested that hydroxyl functionalities in PQPBr-2OH showed a critical promotion effect on its catalytic activity for CO₂ conversion. Moreover, PQPBr-2OH proved to be quite robust and recyclable. It could be reused at least ten times with only a slight decrease of its initial activity.

Imidazolium-Functionalized Ionic Hypercrosslinked Porous Polymers for Efficient Synthesis of Cyclic Carbonates from Simulated Flue Gas

The rapid growth of CO₂ emissions, especially from power plants, has led to the urgent need to directly capture and fix CO₂ in the flue gas after simple purification rather than energy-intensive gas separation. Herein, imidazolium-functionalized ionic hypercrosslinked porous polymers (HCPs) bearing adjustable surface groups were straightforwardly synthesized through co-hypercrosslinking of benzylimidazole salts and crosslinker through Friedel-Crafts alkylation. Abundant microporosity and relatively high ionic moieties were obtainable in the ethyl-group-tethered ionic HCP, giving a remarkably selective CO₂ capture performance with a CO₂ uptake of 3.05 mmol g^-1 and an ideal adsorbed solution theory (IAST) CO₂ /N₂ selectivity as high as 363 (273 K, 1 bar). This ionic polymer demonstrated high efficiency in the synthesis of cyclic carbonates from the coupling of various epoxides with the simulated flue gas (15 % CO₂ and 85 % N₂ ), giving high yields, large turnover numbers (up to 4800), and stable reusability under additive- and solvent-free conditions.

Integration of metalloporphyrin into cationic covalent triazine frameworks for the synergistically enhanced chemical fixation of CO2

Cobalt porphyrin as a Lewis acidic site was integrated into imidazolium-functionalized porous cationic covalent triazine frameworks for the cooperatively enhanced catalysis CO₂ cycloaddition to produce cyclic carbonates.

Physically mixed catalytic system of amino and sulfo-functional porous organic polymers as efficiently synergistic co-catalysts for one-pot cascade reactions

Acid/base bi-functional polymeric materials were prepared using physically mixed porous polymers P(DVB-VBS) with sulfonic acid and P(DVB-VBA) with amino groups for various cascade reactions.

Facile synthesis of crystalline viologen-based porous ionic polymers with hydrogen-bonded water for efficient catalytic CO2 fixation under ambient conditions

In this work, we report a series of crystalline viologen-based porous ionic polymers (denoted VIP-X, X = Cl or Br), that have in situ formed dicationic viologens paired with halogen anions and intrinsic hydrogen-bonded water molecules, towards metal-free heterogeneous catalytic conversion of carbon dioxide (CO₂) under mild conditions. The targeted VIP-X materials were facilely constructed via the Menshutkin reaction of 4,4′-bipyridine with 4,4′-bis(bromomethyl)biphenyl (BCBMP) or 4,4′-bis(chloromethyl)biphenyl (BBMBP) monomers. Their crystalline and porous structures, morphological features and chemical structures and compositions were fully characterized by various advanced techniques. The optimal catalyst VIP-Br afforded a high yield of 99% in the synthesis of cyclic carbonate by CO₂ cycloaddition with epichlorohydrin under atmospheric pressure (1 bar) and a low temperature (40 °C), while other various epoxides could be also converted into cyclic carbonates under mild conditions. Moreover, the catalyst VIP-Br could be separated easily and reused with good stability. The remarkable catalytic performance could be attributed to the synergistic effect of the enriched Br⁻ anions and available hydrogen bond donors –OH groups coming from H-bonded water molecules.

Viologen-based porous ionic polymers with halogen anions and hydrogen-bonded water were constructed for efficient catalytic CO₂ fixation under mild conditions.

Exploration of advanced porous organic polymers as a platform for biomimetic catalysis and molecular recognition

This Feature article summarizes our progress in the design of biomimetic POPs for catalysis and molecular recognition with enhanced performance.

Highly efficient synergistic CO2 conversion with epoxide using copper polyhedron-based MOFs with Lewis acid and base sites

The catalytic performances and effect of LASs and LBSs of four isomorphous Cu-PMOFs in CO₂ cycloaddition reaction were systematically studied. JLU-Liu21 exhibited significant catalytic efficiency, remarkable recyclability and catalytic stability.

Dual-Ionically Bound Single-Site Rhodium on Porous Ionic Polymer Rivals Commercial Methanol Carbonylation Catalysts

Novel porous polymers can serve as self-supporting solid carriers and provide abundant coordination or charged sites for single-site metals, and thus are emerging as advanced functional materials in heterogeneous catalysis for various transformations traditionally catalyzed by homogeneous systems. A brief overview of the development of this heterogenization given, including the recent advances regarding electrovalent bonds by employing charged supports represented by porous ionic polymers (PIPs), which is exemplified herein with a novel single-site Rh₁ /PIP catalyst, featuring a new active site [Rh(CO)I₃ ]^2- dual-ionically bound onto a quaternary phosphonium cationic framework polymer, different from the single-ionically bound [Rh(CO)₂ I₂ ]^- in previous studies. Such a unique metal configuration of Rh₁ /PIP leads to excellent performance in vapor-phase methanol carbonylation, outperforming commercial homo- and heterogeneous catalysts.