Mechanistic Insights into the Carbon Dioxide/Cyclohexene Oxide Copolymerization Reaction: Is One Metal Center Enough?

Construction of Polycarbonates with Pendant Multifunctional Groups via a One-Step CO2/ Diepoxide Copolymerization Approach

A "one-step" strategy has been demonstrated for the tunable synthesis of multifunctional aliphatic polycarbonates (APCs) with ethylene oxide (EO), ethylene carbonate (EC), and cyclohexene oxide (CHO) side groups by the copolymerization of 4-vinyl-1-cyclohexene diepoxide with carbon dioxide under an aminotriphenolate iron/PPNBz (PPN = bis(triphenylphosphine)-iminium, Bz = benzoate) binary catalyst. By adjusting the PPNBz-to-iron complex ratio and incorporating auxiliary solvents, the content of functional side groups can be tuned within the ranges of 53-75% for EO, 18-47% for EC, and <1-7% for CHO. The yield and molecular weight distribution of the resulting multifunctional APCs are affected by the viscosity of the polymerization system. The use of tetrahydrofuran as an auxiliary solvent enables the preparation of narrow-distribution polycarbonates at high conversion. This work presents a novel perspective for the preparation of tailorable multifunctional APCs.

Cooperative Initiation in a Dinuclear Indium Complex for CO2 Epoxide Copolymerization

Dinuclear indium complexes have been synthesized and characterized. These include neutral and cationic indium complexes supported by a Schiff base ligand bearing a binaphthol linker. The new compounds were investigated for alternating copolymerization of CO₂ and cyclohexene oxide. In particular, the neutral indium chloride complex (±)-[(O_NapN_iN)InCl₂]₂ (4) showed high conversion of cyclohexene oxide and selectivity for poly(cyclohexene carbonate) formation without cocatalysts at 80 °C under various CO₂ pressures (2-30 bar). Importantly, the reactivity of the dinuclear indium chloride complex 4 is drastically different from that of the mononuclear indium chloride complex (±)-(NN_iO_tBu)InCl₂ (5), suggesting a cooperative initiation mechanism involving the two indium centers in 4.

Catalyst Engineering Empowers the Creation of Biomass-Derived Polyesters and Polycarbonates

ConspectusThe introduction of circular principles in chemical manufacturing will drastically change the way everyday plastics are produced, thereby affecting several aspects of the respective value chains in terms of raw feedstock, recyclability, and cost. The ultimate aim is to ensure a paradigm shift toward plastic-based (consumer) materials that overall can offer a more attractive and sustainable carbon footprint, which is an important requisite from a societal, political, and eventually economical point of view. To realize this important milestone, it is vitally important to control the polymerization processes associated with the creation of novel sustainable materials. In this respect, we realized that expanding the portfolio of biomass-derived monomers may indeed create an impetus for atom circularity; however, the often sterically congested nature of biomass-derived monomers minimizes the ability of previously developed catalysts to activate and transform these precursors. Our motivation was thus spurred by an apparent lack of catalysts suitable for addressing the conversion of such biomonomers, as we realized the potential that new catalytic processes could have to advance and contribute to the development of sustainable materials produced from polycarbonates and polyesters. These two classes of polymers represent crucial ingredients of important and large-scale consumer products and are therefore ideal fits for implementing new catalytic protocols that enable a gradual transition to plastic materials with an improved carbon footprint.When we started our research expedition, the field was dominated by metal catalysts that incorporated preferred, and in some cases even privileged, ligand backbones (such as salens) able to mediate both ring-opening and ring-opening copolymerization manifolds. One major drawback of these aforementioned catalysts is their rather rigid nature, a feature that reduces their ability to act as adaptive systems, especially in cases where bulky monomers are involved. While our initial focus was on the utilization of sustainable metal salen complexes (M = Zn, Fe) for the activation of small cyclic ethers, which are privileged monomers for polyester and polycarbonate production, we were rapidly confronted with severe limitations related to their inability to activate a wider range of complex epoxides and oxetanes, which was imparted by the planar coordination geometry of the salen ligand in most of its applied metal complexes. In our quest to find a catalytically more effective metal complex with the ability to electronically and sterically tune its substrate-binding and substrate-activation potential, we identified aminotriphenolates as structurally versatile, easily accessible, and scalable ligands for various earth-abundant metal cations. Moreover, the ligand backbone allows for switchable coordination environments around the metal centers, thus offering the necessary adaptation in substrate activation events.This Account describes how Al(III)- and Fe(III)-centered aminotriphenolates have conquered a prominent position as catalyst components in the synthesis of new biobased polyester and polycarbonate architectures, thereby changing the landscape of previously difficult to convert biomonomers, and expanding the chemical space of biobased functional polymers. With the ever-increasing influence of legislation and the restrictions placed on the use of fossil-fuel-based feedstock, the polymer industry needs viable alternatives to design materials that are greener, cost-effective, and allow for the exploration and optimization of their recycling and properties.

Bimetallic Zinc Catalysts for Ring-Opening Copolymerization Processes

Novel bimetallic zinc acetate complexes supported by heteroscorpionate ligands have been developed for the ring-opening copolymerization of cyclohexene oxide and CO₂ and the terpolymerization of cyclohexene oxide, phthalic anhydride, and CO₂. Heteroscorpionate ligands precursors L₁-L₃ were reacted with two equivalents of zinc acetate to afford the dinuclear zinc complexes [{Zn(κ³-bpzappe)}(μ-O₂CCH₃)₃-{Zn(HO₂CCH₃)}] (1), [{Zn(κ³-bpzbdmape)}(μ-O₂CCH₃)₃-{Zn(HO₂CCH₃)}] (2), and [{Zn(κ³-bpzbdeape)}(μ-O₂CCH₃)₃{Zn(HO₂CCH₃)}] (3) in excellent yields. The molecular structure of these compounds was determined spectroscopically and confirmed by X-ray diffraction analysis. Zinc acetate complexes 1-3 were screened as catalysts for the copolymerization of cyclohexene oxide and CO₂ to produce poly(cyclohexene)carbonate, and complex 3 was found to be the most active catalyst for this process in the absence of a cocatalyst. Furthermore, the terpolymerization of cyclohexene oxide, phthalic anhydride, and CO₂ was studied using the combination of complex 3 and 4-dimethylaminopyridine as catalyst system yielding the corresponding polyester-polycarbonate materials.

Aluminum porphyrins with quaternary ammonium halides as catalysts for copolymerization of cyclohexene oxide and CO2: metal-ligand cooperative catalysis

Bifunctional Al porphyrins worked as excellent catalysts for the copolymerization of cyclohexene oxide (CHO) and CO₂.

Bifunctional Al^III porphyrins with quaternary ammonium halides, 2-Cl and 2-Br, worked as excellent catalysts for the copolymerization of cyclohexene oxide (CHO) and CO₂ at 120 °C. Turnover frequency (TOF) and turnover number (TON) reached 10 000 h^–1 and 55 000, respectively, and poly(cyclohexene carbonate) (PCHC) with molecular weight of up to 281 000 was obtained with a catalyst loading of 0.001 mol%. In contrast, bifunctional Mg^II and Zn^II counterparts, 3-Cl and 4-Cl, as well as a binary catalyst system, 1-Cl with bis(triphenylphosphine)iminium chloride (PPNCl), showed poor catalytic performances. Kinetic studies revealed that the reaction rate was first-order in [CHO] and [2-Br] and zero-order in [CO₂], and the activation parameters were determined: ΔH^‡ = 12.4 kcal mol^–1, ΔS^‡ = –26.1 cal mol^–1 K^–1, and ΔG^‡ = 21.6 kcal mol^–1 at 80 °C. Comparative DFT calculations on two model catalysts, Al^III complex 2′ and Mg^II complex 3′, allowed us to extract key factors in the catalytic behavior of the bifunctional Al^III catalyst. The high polymerization activity and carbonate-linkage selectivity originate from the cooperative actions of the metal center and the quaternary ammonium cation, both of which facilitate the epoxide-ring opening by the carbonate anion to form the carbonate linkage in the key transition state such as TS3b (ΔH^‡ = 13.3 kcal mol^–1, ΔS^‡ = –3.1 cal mol^–1 K^–1, and ΔG^‡ = 14.4 kcal mol^–1 at 80 °C).

Ti(IV)-Tris(phenolate) Catalyst Systems for the Ring-Opening Copolymerization of Cyclohexene Oxide and Carbon Dioxide

Titanium(IV) complexes of amino-tris(phenolate) ligands (LTiX, X = chloride, isopropoxide) together with bis(triphenylphosphine)iminium chloride (PPNCl) are active catalyst systems for the ring-opening copolymerization of carbon dioxide and cyclohexene oxide. They show moderate activity, with turnover frequency values of ∼60 h^–1 (0.02 mol % of catalyst, 80 °C, 40 bar of CO₂) and high selectivity (carbonate linkages >90%), but their absolute performances are lower than those of the most active Ti(IV) catalyst systems. The reactions proceed with linear evolution of polycarbonate (PCHC) molar mass with epoxide conversion, consistent with controlled polymerizations, and evolve bimodal molar mass distributions of PCHC (up to M_n = 42 kg mol^–1). The stoichiometric reaction between [LTiOⁱPr] and tetraphenylphosphonium chloride, PPh₄Cl, allows isolation of the putative catalytic intermediate [LTi(OⁱPr)Cl]⁻, which is characterized using single-crystal X-ray diffraction techniques. The anionic titanium complex [LTi(OR)Cl]⁻ is proposed as a model for the propagating alkoxide intermediates in the catalytic cycle.

Mechanistic guidelines in nonreductive conversion of CO2: the case of cyclic carbonates

This perspective provides general mechanistic guidelines for the catalytic formation of cyclic organic carbonates from CO₂ and cyclic ethers.

Highly active bimetallic nickel catalysts for alternating copolymerization of carbon dioxide with epoxides

Catalyst 1 was reported for the first time to be effective for nickel-catalyzed CO₂/CHO copolymerization at 1 atm CO₂ pressure.

Entropic corrections for the evaluation of the catalytic activity in the Al(iii) catalysed formation of cyclic carbonates from CO2 and epoxides

Entropic corrections are found to be crucial for evaluating the catalytic performance in solution for the reaction of CO₂ with epoxides.

Current advances in the catalytic conversion of carbon dioxide by molecular catalysts: an update

Recent advances (2015–) in the catalytic conversion of CO₂ by metal-based and metal-free systems are discussed.

Dinuclear iron(iii) complexes bearing phenylene-bridged bis(amino triphenolate) ligands as catalysts for the copolymerization of cyclohexene oxide with carbon dioxide or phthalic anhydride

Dinuclear iron(iii) complexes bearing rigid ortho-, meta-, and para-phenylene bridges as effective catalysts for CHO/CO₂ and CHO/PA copolymerizations.

Highly Active and Readily Accessible Proline-Based Dizinc Catalyst for CO2 /Epoxide Copolymerization

In the pursuit of CO₂ -based materials, the development of efficient catalysts for the alternating copolymerization of CO₂ and epoxides to give polycarbonates is receiving particular attention. Desirable attributes for such catalysts are high copolymerization activity at low CO₂ pressure, as well as chemo- and stereocontrol over the formed polymer. Here, we report a novel chiral zinc catalyst that can be isolated in 97 % yield from commercial sources, and that produces polycarbonates selectively from neat cyclohexene oxide under 1 bar of CO₂ pressure at temperatures above 50 °C. At 80 °C reaction temperature, TONs of 1684 and initial TOFs up to 149 h^-1 were measured, producing an isotactic-enriched polycarbonate with a probability P_m of 65 % for the formation of a meso diad. Insight into the dinuclear nature of the active species and the copolymerization progress has been gained from structural and spectroscopic studies.