An In-Depth Structural Study of the Carbon Dioxide Adsorption Process in the Porous Metal-Organic Frameworks CPO-27-M

Revisiting Metal-Organic Frameworks Porosimetry by Positron Annihilation: Metal Ion States and Positronium Parameters

Metal-organic frameworks (MOFs) stand as pivotal porous materials with exceptional surface areas, adaptability, and versatility. Positron Annihilation Lifetime Spectroscopy (PALS) is an indispensable tool for characterizing MOF porosity, especially micro- and mesopores in both open and closed phases. Notably, PALS offers porosity insights independent of probe molecules, which is vital for detailed characterization without structural transformations. This study explores how metal ion states in MOFs affect PALS results. We find significant differences in measured porosity due to paramagnetic or oxidized metal ions compared to simulated values. By analyzing CPO-27(M) (M = Mg, Co, Ni), with identical pore dimensions, we observe distinct PALS data alterations based on metal ions. Paramagnetic Co and Ni ions hinder and quench positronium (Ps) formation, resulting in smaller measured pore volumes and sizes. Mg only quenches Ps, leading to underestimated pore sizes without volume distortion. This underscores the metal ions' pivotal role in PALS outcomes, urging caution in interpreting MOF porosity.

In Situ Single-crystal X-ray Diffraction Studies of Physisorption and Chemisorption of SO2 within a Metal-Organic Framework and Its Competitive Adsorption with Water

Living on an increasingly polluted planet, the removal of toxic pollutants such as sulfur dioxide (SO2) from the troposphere and power station flue gas is becoming more and more important. The CPO-27/MOF-74 family of metal-organic frameworks (MOFs) with their high densities of open metal sites is well suited for the selective adsorption of gases that, like SO2, bind well to metals and have been extensively researched both practically and through computer simulations. However, until now, focus has centered upon the binding of SO2 to the open metal sites in this MOF (called chemisorption, where the adsorbent-adsorbate interaction is through a chemical bond). The possibility of physisorption (where the adsorbent-adsorbate interaction is only through weak intermolecular forces) has not been identified experimentally. This work presents an in situ single-crystal X-ray diffraction (scXRD) study that identifies discrete adsorption sites within Ni-MOF-74/Ni-CPO-27, where SO2 is both chemisorbed and physisorbed while also probing competitive adsorption of SO2 of these sites when water is present. Further features of this site have been confirmed by variable SO2 pressure scXRD studies, DFT calculations, and IR studies.

Augmented Reality for Enhanced Visualization of MOF Adsorbents

Augmented reality (AR) is an emerging technique used to improve visualization and comprehension of complex 3D materials. This approach has been applied not only in the field of chemistry but also in real estate, physics, mechanical engineering, and many other areas. Here, we demonstrate the workflow for an app-free AR technique for visualization of metal-organic frameworks (MOFs) and other porous materials to investigate their crystal structures, topology, and gas adsorption sites. We think this workflow will serve as an additional tool for computational and experimental scientists working in the field for both research and educational purposes.

Impact of Compression on the Textural and Structural Properties of CPO-27(Ni)

The employment of metal-organic frameworks in powder form is undesirable from an industrial perspective due to process and safety issues. This work is devoted to evaluating the impact of compression on the textural and structural properties of CPO-27(Ni). For this purpose, CPO-27(Ni) was synthesized under hydrosolvothermal conditions and characterized. Then, the resulting powder was compressed into binderless pellets using variable compression forces ranging from 5-90 kN (37-678 MPa) and characterized by means of nitrogen adsorption/desorption, thermogravimetric analysis and powder X-ray diffraction to evaluate textural, thermal and structural changes. Both textural and structural properties decreased with increasing compression force. Thermal stability was impacted in pellets compressed at forces over 70 kN. CPO-27(Ni) pelletized at 5, 8 and 10 kN, and retained more than 94% of its initial textural properties, while a loss of about one-third of the textural property was observed for the two most compressed samples (70 and 90 kN) compared to the starting powder.

In Situ Neutron Diffraction of Zn-MOF-74 Reveals Nanoconfinement-Induced Effects on Adsorbed Propene

Even though confinement was identified as a common element of selective catalysis and simulations predicted enhanced properties of adsorbates within microporous materials, experimental results on the characterization of the adsorbed phase are still rare. In this study, we provide experimental evidence of the increase of propene density in the channels of Zn-MOF-74 by 16(2)% compared to the liquid phase. The ordered propene molecules adsorbed within the pores of the MOF have been localized by in situ neutron powder diffraction, and the results are supported by adsorption studies. The formation of a second adsorbate layer, paired with nanoconfinement-induced short intermolecular distances, causes the efficient packing of the propene molecules and results in an increase of olefin density.

Impedance-Based Detection of NO2 Using Ni-MOF-74: Influence of Competitive Gas Adsorption

Chemically robust, low-power sensors are needed for the direct electrical detection of toxic gases. Metal-organic frameworks (MOFs) offer exceptional chemical and structural tunability to meet this challenge, though further understanding is needed regarding how coadsorbed gases influence or interfere with the electrical response. To probe the influence of competitive gases on trace NO2 detection in a simulated flue gas stream, a combined structure-property study integrating synchrotron powder diffraction and pair distribution function analyses was undertaken, to elucidate how structural changes associated with gas binding inside Ni-MOF-74 pores correlate with the electrical response from Ni-MOF-74-based sensors. Data were evaluated for 16 gas combinations of N2, NO2, SO2, CO2, and H2O at 50 °C. Fourier difference maps from a rigid-body Rietveld analysis showed that additional electron density localized around the Ni-MOF-74 lattice correlated with large decreases in Ni-MOF-74 film resistance of up to a factor of 6 × 103, observed only when NO2 was present. These changes in resistance were significantly amplified by the presence of competing gases, except for CO2. Without NO2, H2O rapidly (<120 s) produced small (1-3×) decreases in resistance, though this effect could be differentiated from the slower adsorption of NO2 by the evaluation of the MOF's capacitance. Furthermore, samples exposed to H2O displayed a significant shift in lattice parameters toward a larger lattice and more diffuse charge density in the MOF pore. Evaluating the Ni-MOF-74 impedance in real time, NO2 adsorption was associated with two electrically distinct processes, the faster of which was inhibited by competitive adsorption of CO2. Together, this work points to the unique interaction of NO2 and other specific gases (e.g., H2O, SO2) with the MOF's surface, leading to orders of magnitude decrease in MOF resistance and enhanced NO2 detection. Understanding and leveraging these coadsorbed gases will further improve the gas detection properties of MOF materials.

Effect of Larger Pore Size on the Sorption Properties of Isoreticular Metal-Organic Frameworks with High Number of Open Metal Sites

Four isostructural CPO‐54‐M metal‐organic frameworks based on the larger organic linker 1,5‐dihydroxynaphthalene‐2,6‐dicarboxylic acid and divalent cations (M=Mn, Mg, Ni, Co) are shown to be isoreticular to the CPO‐27 (MOF‐74) materials. Desolvated CPO‐54‐Mn contains a very high concentration of open metal sites, which has a pronounced effect on the gas adsorption of N₂, H₂, CO₂ and CO. Initial isosteric heats of adsorption are significantly higher than for MOFs without open metal sites and are slightly higher than for CPO‐27. The plateau of high heat of adsorption decreases earlier in CPO‐54‐Mn as a function of loading per mole than in CPO‐27‐Mn. Cluster and periodic density functional theory based calculations of the adsorbate structures and energetics show that the larger adsorption energy at low loadings, when only open metal sites are occupied, is mainly due to larger contribution of dispersive interactions for the materials with the larger, more electron rich bridging ligand.

Polypyrrole decorated metal-organic frameworks for supercapacitor devices

Due to their large specific surface areas and porosity, metal-organic frameworks (MOFs) have found many applications in catalysis, gas separation, and gas storage. However, their use as electronic components such as supercapacitors is stunted due to their poor electrical conductivity. We report a remedy for this by combining the MOF structure with polypyrrole (PPy), a well-known conductive polymer. Three MOFs are studied for modification to this end: CPO-27-Ni and CPO-27-Co (M2DOBDC, M = Ni2+, Co2+, DOBDC = 2,5-dihydroxy-1,4-benzenedicarboxylate) and HKUST-1 (Cu3(BTC)2, BTC = 1,3,5 benzenetricarboxylate). The gravimetric capacitance of pure MOFs is boosted several orders of magnitude after reinforcement of PPy (e.g., from 0.679 to 185 F g-1 for HKUST-1 and PPy-HKUST-1, respectively), and is much higher than reported for pure PPy. In total, these PPy-d-MOFs exhibit specific capacitances up to 354 F g-1, retaining 70% of this value even after 2500 cycles. Among them, the highest capacitance is found for PPy-CPO-27-Ni (354 F g-1), followed by PPy-CPO-27-Co (263 F g-1) and PPy-HKUST-1 (185 F g-1). The maximum operating potential for these electrodes is 0.5 V, which is restricted by the contact of MOF with aqueous electrolyte and with extremely low PPy content. As a solution, higher PPy loading and rational adjustment of particle size and porosity of both MOF and PPy are recommended so that the MOF/electrolyte interface is limited, leading to more robust electrode. The work completed here describes a highly promising approach to tackling the electrically insulating nature of MOFs, paving the way for their use in electrochemical energy storage devices.

Coordinatively unsaturated metal sites (open metal sites) in metal–organic frameworks: design and applications

The defined synthesis of OMS in MOFs is the basis for targeted functionalization through grafting, the coordination of weakly binding species and increased (supramolecular) interactions with guest molecules.

Carbon dioxide induced structural phase transition in metal–organic frameworks CPO-27

The framework of CO₂ saturated CPO-27 is deformed below 110 K into a superstructure of the original honeycomb structure.

Tuning Expanded Pores in Metal-Organic Frameworks for Selective Capture and Catalytic Conversion of Carbon Dioxide

Three Co-based isostructural MOF-74-III materials with expanded pores are synthesized, with varied extent of fused benzene rings onto sidechain of same-length ligands to finely tune the pore sizes to 2.6, 2.4, and 2.2 nm. Gas sorption results for these highly mesoporous materials show that alternately arranged fused benzene rings on one side of the ligand could serve as extra anchoring sites for CO₂ molecules with π-π interactions, conspicuously enhancing CO₂ uptake and CO₂ /CH₄ and CO₂ /N₂ selectivity; while more steric hindrance effect towards open Co^II sites were imposed by ligands flanked with fused benzene rings on both sides, compromising such extra-sites enhancement. In the catalytic conversion of CO₂ with propylene oxide to form propylene carbonate, the as-synthesized MOF-74-III(Co) with desired properties of highly exposed and accessible open Co^II centers, large mesopore apertures and multi-interactive sites, demonstrated higher catalytic activity compared with other two MOFs, with benzene rings fused to ligands hampering the functionality of Co^II centers as Lewis acid sites. Our results highlight the viability of finely tuning the expanded pores of MOF-74 isostructure and the effect of fused benzene rings as functional groups onto selective CO₂ capture and conversion.

Biporous Metal-Organic Framework with Tunable CO2/CH4 Separation Performance Facilitated by Intrinsic Flexibility

In this work, we report the synthesis of SION-8, a novel metal-organic framework (MOF) based on Ca(II) and a tetracarboxylate ligand TBAPy^4- endowed with two chemically distinct types of pores characterized by their hydrophobic and hydrophilic properties. By altering the activation conditions, we gained access to two bulk materials: the fully activated SION-8F and the partially activated SION-8P with exclusively the hydrophobic pores activated. SION-8P shows high affinity for both CO₂ ( Q_st = 28.4 kJ/mol) and CH₄ ( Q_st = 21.4 kJ/mol), while upon full activation, the difference in affinity for CO₂ ( Q_st = 23.4 kJ/mol) and CH₄ ( Q_st = 16.0 kJ/mol) is more pronounced. The intrinsic flexibility of both materials results in complex adsorption behavior and greater adsorption of gas molecules than if the materials were rigid. Their CO₂/CH₄ separation performance was tested in fixed-bed breakthrough experiments using binary gas mixtures of different compositions and rationalized in terms of molecular interactions. SION-8F showed a 40-160% increase (depending on the temperature and the gas mixture composition probed) of the CO₂/CH₄ dynamic breakthrough selectivity compared to SION-8P, demonstrating the possibility to rationally tune the separation performance of a single MOF by manipulating the stepwise activation made possible by the MOF's biporous nature.

An experimental and computational study of CO2 adsorption in the sodalite-type M-BTT (M = Cr, Mn, Fe, Cu) metal-organic frameworks featuring open metal sites

We present a comprehensive investigation of the CO2 adsorption properties of an isostructural series of metal-organic frameworks, M-BTT (M = Cr, Mn, Fe, Cu; BTT3- = 1,3,5-benzenetristetrazolate), which exhibit a high density of open metal sites capable of polarizing and binding guest molecules. Coupling gas adsorption measurements with in situ neutron and X-ray diffraction experiments provides molecular-level insight into the adsorption process and enables rationalization of the observed adsorption isotherms. In particular, structural data confirms that the high initial isosteric heats of CO2 adsorption for the series are directly correlated with the presence of open metal sites and further reveals the positions and orientations of as many as three additional adsorption sites. Density functional theory calculations that include van der Waals dispersion corrections quantitatively support the observed structural features associated with the primary and secondary CO2 binding sites, including CO2 positions and orientations, as well as the experimentally determined isosteric heats of CO2 adsorption.

Cyclophosphazene-Based Hybrid Nanoporous Materials as Superior Metal-Free Adsorbents for Gas Sorption Applications

Cyclophosphazene-based inorganic-organic hybrid nanoporous materials (CHNMs) have been synthesized by a facile solvothermal method. The condensation of pyrrole with the reaction product of phosphonitrilic chloride trimer and 4-hydroxybenzaldehyde resulted in the formation of high-surface-area CHNMs. The maximum specific surface area (SA_BET) of 1328 m² g^-1 with hierarchical pore structures having micropores centered at 1.18 nm and mesopores in the range of 2.6-3.6 nm was estimated from the N₂ sorption analysis. Observation of high SA_BET could be attributed to the synergy effect exerted by the cyclophosphazene moiety owing to its three-dimensional paddle wheel structure. The metal-free adsorbent exhibited a high and reversible CO₂ uptake of 22.8 wt % at 273 K and 1 bar. The performance is on the higher side among the reported metal-free inorganic-organic hybrid nanoporous adsorbents. Moreover, the high H₂ uptake of 2.02 wt % at 77 K and 1 bar is an added advantage. The superior performance of the adsorbents for the gas sorption applications could be attributed to the combined effect of high SA_BET and hierarchical pore structure, which has made CHNMs good candidates for energy and environmental applications.

Unexpected Diffusion Anisotropy of Carbon Dioxide in the Metal-Organic Framework Zn2(dobpdc)

Metal-organic frameworks are promising materials for energy-efficient gas separations, but little is known about the diffusion of adsorbates in materials featuring one-dimensional porosity at the nanoscale. An understanding of the interplay between framework structure and gas diffusion is crucial for the practical application of these materials as adsorbents or in mixed-matrix membranes, since the rate of gas diffusion within the adsorbent pores impacts the required size (and therefore cost) of the adsorbent column or membrane. Here, we investigate the diffusion of CO2 within the pores of Zn2(dobpdc) (dobpdc4- = 4,4'-dioxidobiphenyl-3,3'-dicarboxylate) using pulsed field gradient (PFG) nuclear magnetic resonance (NMR) spectroscopy and molecular dynamics (MD) simulations. The residual chemical shift anisotropy for pore-confined CO2 allows PFG NMR measurements of self-diffusion in different crystallographic directions, and our analysis of the entire NMR line shape as a function of the applied field gradient provides a precise determination of the self-diffusion coefficients. In addition to observing CO2 diffusion through the channels parallel to the crystallographic c axis (self-diffusion coefficient D∥ = (5.8 ± 0.1) × 10-9 m2 s-1 at a pressure of 625 mbar CO2), we unexpectedly find that CO2 is also able to diffuse between the hexagonal channels in the crystallographic ab plane (D⊥ = (1.9 ± 0.2) × 10-10 m2 s-1), despite the walls of these channels appearing impermeable by single-crystal X-ray crystallography and flexible lattice MD simulations. Observation of such unexpected diffusion in the ab plane suggests the presence of defects that enable effective multidimensional CO2 transport in a metal-organic framework with nominally one-dimensional porosity.