Graphene-Supported Pyrene-Modified Cobalt Corrole with Axial Triphenylphosphine for Enhanced Hydrogen Evolution in pH 0-14 Aqueous Solutions

Structural modification of nickel tetra(thiocyano)corroles during electrochemical water oxidation

In this study, we present two fully characterized nickel tetrathiocyanocorroles, representing a novel class of 3d-metallocorroles. These nickel(II) ions form square planar complexes, exhibiting a d8-electronic configuration. These anionic complexes are stabilized by the electron-withdrawing SCN groups on the bipyrrole unit of the corrole. The reduced aromaticity in these anionic nickel(II) corrole complexes is evidenced by single crystal X-ray diffraction (XRD) data and a markedly altered absorption profile, with stronger Q bands compared to Soret bands. Notably, the UV-Vis and electrochemical data exhibit significant differences from previously reported nickel(II) corrole radical cation and nickel(II) porphyrin complexes. While these electrochemical data bear a resemblance to those of the anionic nickel(II) corrole by Gross et al., the UV-Vis data show substantial distinctions. Additionally, we explore the utilization of nickel(II)-corrole@CC (where CC denotes carbon cloth) as an electrocatalyst for the oxygen evolution reaction (OER) in an alkaline medium. During electrochemical water oxidation, the molecular catalyst is partially converted to nickel (oxy)hydroxide, Ni(O)OH. The structure reveals the coexistence of the molecular complex and Ni(O)OH in the active catalyst, achieving a turnover frequency (TOF) of 3.32 × 10-2 s-1. The synergy between the homogeneous and heterogeneous phases improves the OER activity, providing more active sites and edge sites and enhancing interfacial charge transfer.

Hydrogen Evolution of a Unique DNAzyme Composed of Cobalt-Protoporphyrin IX and G-Quadruplex DNA

Molecular hydrogen (H2 ) is a clean and renewable fuel that has garnered significant interest in the search for alternatives to fossil fuels. Here, we constructed an artificial DNAzyme composed of cobalt-protoporphyrin IX (CoPP) and G-quadruplex DNA, possessing a unique H2 Oint ligand between the CoPP and G-quartet planes. We show for the first time that CoPP-DNAzyme catalyzes photo-induced H2 production under anaerobic conditions with a turnover number (TON) of 1229 ± 51 over 12 h at pH 6.05 and 10 °C. Compared with free-CoPP, complexation with G-quadruplex DNA resulted in a 4.7-fold increase in H2 production activity. The TON of the CoPP-DNAzyme revealed an optimal acid-base equilibrium with a pKa value of 7.60 ± 0.05, apparently originating from the equilibrium between Co(III)-H- and Co(I) states. Our results demonstrate that the H2 Oint ligand can augment and modulate the intrinsic catalytic activity of H2 production catalysts. These systems pave the way to using DNAzymes for H2 evolution in the direct conversion of solar energy to H2 from water.

Substituent Effect on Ligand-Centered Electrocatalytic Hydrogen Evolution of Phosphorus Corroles

There have been few reports on the substituent effect of main-group-element corrole complexes as ligand-centered homogeneous electrocatalysts for the hydrogen evolution reaction (HER). The key to comprehend the catalytic mechanism and develop efficient catalysts is the elucidation of the effects of electronic structure on the performance of energy-related small molecules. In this work, the "push-pull" electronic effect of the substituents on electrocatalytic HER of phosphorus corroles was investigated by using 5,10,15-tris(phenyl) corrole phosphorus (1P), 10-pentafluorophenyl-5,15-bis(phenyl) corrole phosphorus (2P), 10-phenyl-5,15-bis(pentafluorophenyl) corrole phosphorus (3P), 5,10,15-tris(pentafluorophenyl) corrole phosphorus (4P) complexes bearing hydroxyl axial ligands and different numbers of fluorine atoms on the meso-aryl substituents. The results revealed that the catalytic HER activity of phosphorus corroles decreased with the increasing of fluorine atom numbers, it follows in the order 1P>2P>3P>4P. Density functional theory (DFT) calculations show that the corrole 1P has the lowest free energy barrier in catalytic HER.

Methylthiophenyl- and Methylthiobiphenyl-Substituted A2B CoIIIcorroles: Modulating Electrocatalyzed Hydrogen Evolution Reactions on Surface-Modified Gold Electrodes

Four A₂B-type Co^IIIcorroles (2a-2d) with electron-donating/withdrawing substituents at the A₂ meso-aryl substituents and a 4-(methylthio)phenyl ring at the B position have been synthesized and characterized, along with a series of meso-extended Co^IIIcorroles (4a-4c) with 4'-(methylthio)biphenyl moieties. The electronic structures and structure-property relationships of the dyes have been analyzed by comparing their redox and optical properties to trends predicted in density functional theory calculations. Au electrodes surface-modified with 2a-2d and 4a-4c are highly efficient catalysts for electrocatalyzed hydrogen evolution reactions, and the electrocatalytic properties can be readily modulated by fine-tuning the electronic structure of the Co^IIIcorrole and the distance between the "Au-S" bond and Co^III center.

Electrocatalytic oxygen reduction with cobalt corroles bearing cationic substituents

Recent decades have seen increasing interest in developing highly active and selective electrocatalysts for the oxygen reduction reaction (ORR). The active site environment of cytochrome c oxidases (CcOs), including electrostatic and hydrogen-bonding interactions, plays an important role in promoting the selective conversion of dioxygen to water. Herein, we report the synthesis of three Co^III corroles, namely 1 (with a 10-phenyl ortho-trimethylammonium cationic group), 2 (with a 10-phenyl ortho-dimethylamine group) and 3 (with a 10-phenyl para-trimethylammonium cationic group) as well as their electrocatalytic ORR activities in both acidic and neutral solutions. We discovered that 1 is much more active and selective than 2 and 3 for the electrocatalytic four-electron ORR. Importantly, 1 showed ORR activities with half-wave potentials at E_1/2 = 0.75 V versus RHE in 0.5 M H₂SO₄ solutions and at E_1/2 = 0.70 V versus RHE in neutral 0.1 M phosphate buffer solutions. This work is significant for outlining a strategy to increase both the activity and selectivity of metal corroles for the electrocatalytic ORR by introducing cationic units.

Chlorocobaloxime containing N-(4-pyridylmethyl)-1,8-naphthalamide peripheral ligands: synthesis, characterization and enhanced electrochemical hydrogen evolution in alkaline medium

Two new discrete cobaloxime based complexes with the general formula [ClCo(dioxime)₂L] (1 and 2), L1 = N-(4-pyridylmethyl)-1,8-naphthalamide, L2 = 4-bromo-N-(4-pyridylmethyl)-1,8-naphthalamide have been synthesized and characterized by various spectroscopic techniques such as FT-IR, ¹H, ¹³C{¹H} NMR and PXRD. The molecular structures of both complexes have also been determined using single crystal X-ray crystallography. The solid state molecular structures revealed distorted octahedral geometry around the Co(III) central metal ion with two dioximes in the equatorial plane and axial positions are occupied by chloro and pyridine nitrogen of N-(4-pyridylmethyl)-1,8-naphthalamide ligands. Both complexes exhibit weaker non-covalent interactions (C-H⋯O, C-H⋯Cl and C-H⋯π(Centroid) in complex 1 whereas C-H⋯O and C-H⋯Br in complex 2) resulting in the formation of dimeric and 1D supramolecular structures. Furthermore, these complexes are immobilized onto the surface of activated carbon cloth (CC) and their electrocatalytic performance for the hydrogen evolution reaction (HER) has been investigated in alkaline and acidic media as well as buffer solution. In alkaline medium, we found that complex 2 exhibited impressive electrocatalytic HER activity and produced a current density of -10 mA cm^-2 at an overpotential of 260 mV, whereas complex 1 produced the same current density at an overpotential of 334 mV. An electrochemical impedance spectroscopy (EIS) spectral study revealed the faster charge transfer kinetics of complex 2 than that of complex 1. Similarly, the low Tafel slope (100 mV dec^-1) for the HER with complex 2 indicates faster HER kinetics compared to complex 1. The chronoamperometric study showed that complex 2 is stable under electrocatalytic HER conditions for 5 h without losing the initial current density and it has also been established that the complex structure is retained after electrocatalysis.

Non-Covalent Integration of a [FeFe]-Hydrogenase Mimic to Multiwalled Carbon Nanotubes for Electrocatalytic Hydrogen Evolution

Surface integration of molecular catalysts inspired from the active sites of hydrogenase enzymes represents a promising route towards developing noble metal-free and sustainable technologies for H2 production. Efficient and stable catalyst anchoring is a key aspect to enable this approach. Herein, we report the preparation and electrochemical characterization of an original diironhexacarbonyl complex including two pyrene groups per catalytic unit in order to allow for its smooth integration, through π-interactions, onto multiwalled carbon nanotube-based electrodes. In this configuration, the grafted catalyst could reach turnover numbers for H2 production (TONH2 ) of up to 4±2×103 within 20 h of bulk electrolysis, operating at neutral pH. Post operando analysis of catalyst functionalized electrodes revealed the degradation of the catalytic unit occurred via loss of the iron carbonyl units, while the anchoring groups and most part of the ligand remained attached onto multiwalled carbon nanotubes.

Covalent Metalloporphyrin Polymer Coated on Carbon Nanotubes as Bifunctional Electrocatalysts for Water Splitting

Metalloporphyrins have exhibited excellent electrocatalytic activities for the hydrogen evolution reaction (HER) and the oxygen evolution reaction (OER). In order to improve the efficiency and conductivity, these molecular catalysts need to be immobilized on conductive electrode materials. Herein, a facile "one-pot" strategy was developed to coat a covalent metalloporphyrin polymer on a carbon nanotube (CNT) as bifunctional catalysts [denoted as MTIPP@CNTs, H₂TIPP = 5,10,15,20-tetra(4-(imidazole-1-yl)phenyl)porphyrin)] for water splitting in alkaline solution. MTIPP@CNTs have shown excellent electrocatalytic activities for both the HER and OER when metalloporphyrin's central metal is optimized as well as the amount of catalysts that is loaded on the CNT. The overpotential (η₁₀) of NiTIPP@CNT-2 for the OER is only 320 mV at a current density of 10 mA cm^-2 in 1.0 M KOH, and CoTIPP@CNT-1 exhibited an excellent electrocatalytic activity for the HER (η₁₀ = 450 mV for 10 mA cm^-2). Furthermore, the remarkable bifunctional electrocatalytic performance (a cell voltage of 2.04 V with a current density of 10 mA cm^-2) was also explored in the overall water splitting test.

Through-Space Electrostatic Effects of Positively Charged Substituents on the Hydrogen Evolution Reaction

Elucidating the effects of various structural components on energy-related small molecule activation is of fundamental and practical significance. Herein the inhibition effect of positively charged substituents on the hydrogen evolution reaction (HER) was reported. With the use of Cu porphyrins 1-5 containing different numbers and locations of positively charged substituents, it was demonstrated that their electrocatalytic HER activities significantly decreased when more cationic units were located close to the Cu ion: the i_cat /i_p (i_cat is the catalytic peak current, i_p is the one-electron reduction peak current) value decreased from 38 with zero cationic unit to 15 with four closely located cationic units. Inspired by this result, Cu porphyrin 6, with four meso-phenyl groups each bearing a negatively charged para-sulfonic substituent, was designed. With these anionic units, 6 outperformed the other Cu porphyrins for electrocatalytic HER under the same conditions.

Metalloporphyrins as Catalytic Models for Studying Hydrogen and Oxygen Evolution and Oxygen Reduction Reactions

The hydrogen evolution reaction (HER), oxygen evolution reaction (OER), and oxygen reduction reaction (ORR) are involved in biological and artificial energy conversions. H-H and O-O bond formation/cleavage are essential steps in these reactions. In nature, intermediates involved in the H-H and O-O bond formation/cleavage are highly reactive and short-lived, making their identification and investigation difficult. In artificial catalysis, the realization of these reactions at considerable rates and close to their thermodynamic reaction equilibria remains a challenge. Therefore, the elucidation of the reaction mechanisms and structure-function relationships is of fundamental significance to understand these reactions and to develop catalysts.This Account describes our recent investigations on catalytic HER, OER, and ORR with metalloporphyrins and derivatives. Metalloporphyrins are used in nature for light harvesting, energy conversion, electron transfer, O₂ activation, and peroxide degradation. Synthetic metal porphyrin complexes are shown to be active for these reactions. We focused on exploring metalloporphyrins to study reaction mechanisms and structure-function relationships because they have stable and tunable structures and characteristic spectroscopic properties.For HER, we identified three H-H bond formation mechanisms and established the correlation between these processes and metal hydride electronic structures. Importantly, we provided direct experimental evidence for the bimetallic homolytic H-H bond formation mechanism by using sterically bulky porphyrins. Homolytic HER has been long proposed but rarely verified because the coupling of active hydride intermediates occurs spontaneously and quickly, making their detection challenging. By blocking the bimolecular mechanism through steric effects, we stabilized and characterized the Ni^III-H intermediate and verified homolytic HER by comparing the reaction behaviors of Ni porphyrins with and without steric effects. We therefore provided an unprecedented example to control homolytic versus heterolytic HER mechanisms through tuning steric effects of molecular catalysts.For the OER, the water nucleophilic attack (WNA) on high-valent terminal Mn-oxo has been proposed for the O-O bond formation in natural and artificial water oxidation. By using Mn tris(pentafluorophenyl)corrole, we identified Mn^V(O) and Mn^IV-peroxo intermediates in chemical and electrochemical OER and provided direct experimental evidence for the Mn-based WNA mechanism. Moreover, we demonstrated several catalyst design strategies to enhance the WNA rate, including the pioneering use of protective axial ligands. By studying Cu porphyrins, we proposed a bimolecular coupling mechanism between two metal-hydroxide radicals to form O-O bonds. Note that late-transition metals do not likely form terminal metal-oxo/oxyl.For the ORR, we presented several strategies to improve activity and selectivity, including providing rapid electron transfer, using electron-donating axial ligands, introducing hydrogen-bonding interactions, constructing dinuclear cooperation, and employing porphyrin-support domino catalysis. Importantly, we used Co porphyrin atropisomers to realize both two-electron and four-electron ORR, representing an unparalleled example to control ORR selectivity by tuning only steric effects without modifying molecular and/or electronic structures.Lastly, we developed several strategies to graft metalloporphyrins on various electrode materials through different covalent bonds. The molecular-engineered materials exhibit boosted electrocatalytic performance, highlighting promising applications of molecular electrocatalysis. Taken together, this Account demonstrates the benefits of exploring metalloporphyrins for the HER, OER, and ORR. The knowledge learned herein is valuable for the development of porphyrin-based catalysts and also other molecular and material catalysts for small molecule activation reactions.

Corroles at work: a small macrocycle for great applications

Corrole chemistry has witnessed an impressive boost in studies in the last 20 years, thanks to the possibility of preparing corrole derivatives by simple synthetic procedures. The investigation of a large number of corroles has highlighted some peculiar characteristics of these macrocycles, having features different from those of the parent porphyrins. With this progress in the elucidation of corrole properties, attention has been focused on the potential for the exploitation of corrole derivatives in different important application fields. In some areas, the potential of corroles has been studied in certain detail, for example, the use of corrole metal complexes as electrocatalysts for energy conversion. In some other areas, the field is still in its infancy, such as in the exploitation of corroles in solar cells. Herein, we report an overview of the different applications of corroles, focusing on the studies reported in the last five years.

Characterizing photocatalysts for water splitting: from atoms to bulk and from slow to ultrafast processes

This review provides a comprehensive overview on characterisation techniques for light-driven redox-catalysts highlighting spectroscopic, microscopic, electrochemical and spectroelectrochemical approaches.

Porphyrin-based frameworks for oxygen electrocatalysis and catalytic reduction of carbon dioxide

The recent progress made on porphyrin-based frameworks and their applications in energy-related conversion technologies (e.g., ORR, OER and CO₂RR) and storage technologies (e.g., Zn–air batteries).

Carbon-Based Materials for the Development of Highly Dispersed Metal Catalysts: Towards Highly Performant Catalysts for Fine Chemical Synthesis

Single-atom catalysts (SACs), consisting of metals atomically dispersed on a support, are considered as advanced materials bridging homogeneous and heterogeneous catalysis, representing the catalysis at the limit. The enhanced performance of these catalysts is due to the combination of distinct factors such as well-defined active sites, comprising metal single atoms in different coordination environments also varying its valence state and strongly interacting with the support, in this case porous carbons, maximizing then the metal efficiency in comparison with other metal surfaces consisting of metal clusters and/or metal nanoparticles. The purpose of this review is to summarize the most recent advances in terms of both synthetic strategies of producing porous carbon-derived SACs but also its application to green synthesis of highly valuable compounds, an area in which the homogeneous catalysts are classically used. Porous carbon-derived SACs emerge as a type of new and eco-friendly catalysts with great potential. Different types of carbon forms, such as multi-wall carbon nanotubes (MWCNTs), graphene and graphitic carbon nitride or even others porous carbons derived from Metal–Organic-Frameworks (MOFs) are recognized. Although it represents an area of expansion, experimentally and theoretically, much more future efforts are needed to explore them in green fine chemical synthesis.

First-row transition metal porphyrins for electrocatalytic hydrogen evolution — a SPP/JPP Young Investigator Award paper

A series of first-row transition metal complexes of tetrakis(pentafluorophenyl)porphyrin (1), denoted as 1-M (M [Formula: see text] Mn, Fe, Co, Ni, Cu, and Zn), were synthesized and examined as electrocatalysts for the hydrogen evolution reaction (HER). All these transition metal porphyrins were shown to be active for HER in acetonitrile using trifluoroacetic acid (TFA) as the proton source. The molecular nature and the stability of these metal porphyrins when functioning as HER catalysts were confirmed, and all catalysts gave Faradaic efficiency of >97% for H2 generation during bulk electrolysis. Importantly, by using 1-Cu, a remarkably high turnover frequency (TOF) of 48500 s[Formula: see text] 1-Cu the most efficient among this series of metal porphyrin catalysts. This TOF value also represents one of the highest values reported in the literature. In addition, electrochemical analysis demonstrated that catalytic HER mechanisms with these 1-M complexes are different. These results show that with the same porphyrin ligand, the change of metal ions will have significant impact on both catalytic efficiency and mechanism. This work for the first time provides direct comparison of electrocatalytic HER features of transition metal complexes of tetrakis(pentafluorophenyl)porphyrin under identical conditions, and will be valuable for future design and development of more efficient HER electrocatalysts of this series.

Computational Insights on the Electrocatalytic Behavior of [Cp*Rh] Molecular Catalysts Immobilized on Graphene for Heterogeneous Hydrogen Evolution Reaction

The heterogeneous metal-based molecular electrocatalyst can typically exhibit attractive features compared to its homogeneous analogue including recoverability and durability. As such, it is necessary to evaluate the electrocatalytic behavior of heterogenized molecular catalysts of interest toward gaining insights concerning the retainability of such behaviors while benefiting from heterogenization. In this work, we examined computationally the electrochemical properties of nanographene-based heterogenized molecular complexes of Rhodium. We assessed, as well, the electrocatalytic behavior of the heterogenized molecular catalyst for hydrogen evolution reaction (HER). Two electrochemical pathways were examined, namely one- and two-electron electrochemical reduction pathways. Interestingly, it is computationally demonstrated that [Rh^III(Cp*)(phen)Cl]⁺-Gr can exhibit redox and electrocatalytic properties for HER that are comparable to its homogeneous analogue via a two-electron reduction pathway. On the other hand, the one-electron reduction pathway is notably found to be less favorable kinetically and thermodynamically. Furthermore, molecular insights are provided with respect to the HER employing molecular orbitals analyses and mechanistic aspects. Importantly, our findings may provide insights toward designing more efficient graphene-based molecular heterogeneous electrocatalysts for more efficient energy production.

The post-functionalization of Co(iii)PPh3 triarylcorroles through Suzuki-Miyaura couplings and their tunable electrochemically-catalyzed hydrogen evolution and oxygen reduction

The post-functionalization of six novel symmetric and asymmetric meso-expanded Co(iii) corroles through Suzuki-Miyaura coupling reactions has been successfully accomplished and is reported along with their structural characterization. An analysis of the structure-property relationships of the optical and redox properties of the corroles has been carried out by comparing their optical spectra and their electrochemical properties. The results demonstrate that post-functionalized meso-expanded Co(iii) triarylcorroles exhibit enhanced electrocatalyzed oxygen reduction reaction (ORR) activity and that their reactivity can be controlled by modulating the electronic structure, the functionalization and the number of coupled meso-substituents.

Noncovalent immobilization of Co(ii)porphyrin through axial coordination as an enhanced electrocatalyst on carbon electrodes for oxygen reduction and evolution

Noncovalent immobilization of Co(ii)porphyrin on carbon nanotubes through axial coordination provides significantly enhanced electrochemically catalyzed oxygen reduction and oxygen evolution.

Artificial photosynthesis: opportunities and challenges of molecular catalysts

Molecular catalysis plays an essential role in both natural and artificial photosynthesis (AP). However, the field of molecular catalysis for AP has gradually declined in recent years because of doubt about the long-term stability of molecular-catalyst-based devices. This review summarizes the development history of molecular-catalyst-based AP, including the fundamentals of AP, molecular catalysts for water oxidation, proton reduction and CO2 reduction, and molecular-catalyst-based AP devices, and it provides an analysis of the advantages, challenges, and stability of molecular catalysts. With this review, we aim to highlight the following points: (i) an investigation on molecular catalysis is one of the most promising ways to obtain atom-efficient catalysts with outstanding intrinsic activities; (ii) effective heterogenization of molecular catalysts is currently the primary challenge for the application of molecular catalysis in AP devices; (iii) development of molecular catalysts is a promising way to solve the problems of catalysis involved in practical solar fuel production. In molecular-catalysis-based AP, much has been attained, but more challenges remain with regard to long-term stability and heterogenization techniques.

Convenient Immobilization of Cobalt Corroles on Carbon Nanotubes through Covalent Bonds for Electrocatalytic Hydrogen and Oxygen Evolution Reactions

Two different methods were used to immobilize Co corroles on carbon nanotubes (CNTs) through covalent bonds. The resulting CNTs engineered with Co corroles were used as electrocatalysts for the hydrogen evolution reaction (HER) and the oxygen evolution reaction (OER) in aqueous solutions of pH 0, 7, and 14. For both HER and OER in all solutions, the hybrids obtained by attaching Co corroles on CNTs through amidation coupling showed better performance. This is likely because the large surface area and good electrical conductivity of CNTs can be well preserved during the amidation reaction under mild conditions.

Copper coordination polymer electrocatalyst for strong hydrogen evolution reaction activity in neutral medium: influence of coordination environment and network structure

Water-coordinated copper coordination polymer exhibited strong enhancement of HER activity in neutral medium with good stability compared to non-water-coordinated coordination polymer.

The Co2+/Ni2+ ion-mediated formation of a topochemically converted copper coordination polymer: structure-dependent electrocatalytic activity

The presence of Co²⁺/Ni²⁺ ions strongly influenced the formation of copper coordination polymers that showed a structure-dependent hydrogen evolution reaction catalytic activity.

Boosting hydrogen evolution by using covalent frameworks of fluorinated cobalt porphyrins supported on carbon nanotubes

A covalent framework using fluorinated cobalt porphyrins is synthesized and shows significantly improved efficiency for the hydrogen evolution reaction in aqueous solution.

Trifluoromethylation for affecting the structural, electronic and redox properties of cobalt corroles

Novel synthetic methodologies for accessing trifluoromethylated cobalt corroles allow beneficial tuning of their chemical and physical properties for catalysis.