Highly Active N,O Zinc Guanidine Catalysts for the Ring-Opening Polymerization of Lactide

Intensive Cycloalkyl-Fused Pyridines for Aminopyridyl-Zinc-Heteroimidazoles Achieving High Efficiency toward the Ring-Opening Polymerization of Lactides

The model precatalyst sp3- and sp2-N dinitrogen-coordinated zinc-heteroimidazole has been used as an efficient catalyst for the ring-opening polymerization of cyclic esters. Subsequent to our exceptional active 5,6,7-trihydroquinolin-8-amine-zinc catalysts for the ring-opening polymerization (ROP) of ε-caprolactone, various pyridine-fused cycloalkanones (ring size from five to eight) are developed for the correspondent fused amine-pyridine derivatives and their zinc-heteroimidazole chloride complexes Zn1-Zn8 (LZnCl2) bearing N-diphenylphosphinoethyl pendants. Activated with two equivalents of LiN(SiMe3)2, the title zinc complexes efficiently promote the ROP of L-lactide (L-LA) in situ; among them, Zn4/2Li(NSiMe3)2 catalyzed 500 equivalent L-LA at 80 °C with 92% conversion in 5 min (TOF: 5520 h-1). Under the same conditions, the catalytic efficiency for the ROP of rac-LA by Zn1-Zn8/2Li(NSiMe3)2 was slightly lower than that for L-LA (highest TOF: 4440 h-1). In both cases, cyclooctyl-fused pyridyl-zinc complexes exhibited higher activity than others, while the cycloheptyl-fused zinc complexes showed the lowest activity. The microstructure analysis of the polymers showed they possessed a linear structure capped with CH3O as major and cyclic structure as minor. In this work, all the ligands and zinc complexes were well characterized by 1H/13C/31P NMR, FT-IR spectroscopy as well as elemental analysis.

Isoselective Polymerization of rac-Lactide by Magnesium Initiators Bearing Achiral Di(2-pyridyl)methyl Substituted Aminophenolate Ligands

Reactions of achiral di(2-pyridyl)methyl substituted aminophenols L^1-6H (2-{N-R³-N-[di(2-pyridyl)methyl]aminomethyl}-4-R¹-6-R²-C₆H₂OH: R¹ = R² = ^tBu, R³ = ⁿBu (L¹H), R³ = ⁿhexyl (L²H), R³ = cyclohexyl (L³H); R¹ = R² = cumyl, R³ = ⁿBu (L⁴H), R³ = ⁿhexyl (L⁵H), R³ = cyclohexyl (L⁶H)) with {Mg[N(SiMe₃)₂]₂}₂ ([L^1-6H]:[Mg] = 1:1) afforded a series of magnesium silylamido complexes 1-6. In the solid state, the magnesium center of 3, 4, and 6 is penta-coordinated by the tetradentate aminophenloate ligand and one silylamido ligand to form a seriously distorted square-pyramidal geometry as confirmed by X-ray crystallography diffraction analysis. VT ¹H NMR and ROESY experiments further indicate that these magnesium complexes are also five-coordinated in solutions where the coordination of either of the two pyridyl pendants to the magnesium center is maintained. Complexes 1-6 are highly active toward the ring-opening polymerization of rac-lactide (rac-LA) at r.t. both in toluene and in tetrahydrofuran, capable of polymerizing 500 equiv of monomer to high conversions just within minutes. Among them, complex 3 exhibited the highest iso-stereoselectivity, affording moderately isotactic polylactide in toluene (P_m = 0.75). It is found that the isoselectivities and activities of these magnesium complexes toward the polymerization of rac-LA are closely associated with the substituents at the ortho-position of the phenoxide unit and on the skeleton nitrogen atom of the ligand. On the basis of NMR spectroscopic studies, the formation of isotactic PLAs with dominant stereoblock sequences was witnessed by using these magnesium complexes as initiators, and the inequivalent coordination of two pyridyl pendant arms in these magnesium complexes might be the source of exerting isoselective control.

A Highly Active and Selective Zirconium-Based Catalyst System for the Industrial Production of Poly(lactic acid)

The biodegradable, aliphatic polyester poly(lactic acid), PLA, is a leading bio-based alternative to petrochemical-derived plastic materials across a range of applications. Widely reported in the available literature as a benchmark for PLA production via the bulk ring-opening polymerization of lactides is the use of divalent tin catalysts, and particularly tin(II) bis(2-ethylhexanoate). We present an alternative zirconium-based system that combines an inexpensive Group IV metal with the robustness, high activity, control, and designed compatibility with existing facilities and processes, that are required for industrial use. We have carried out a comprehensive kinetic study and applied a combined experimental and theoretical approach to understanding the mechanism by which the polymerization of lactide proceeds in the presence of this system. In the laboratory-scale (20 g) polymerization of recrystallized racemic d,l-lactide (rac-lactide), we have measured catalyst turnover frequencies up to at least 56,000 h-1, and confirmed the reported protocols' resistance toward undesirable epimerization, transesterification, and chain scission processes, deleterious to the properties of the polymer product. Further optimization and scale-up under industrial conditions have confirmed the relevance of the catalytic protocol to the commercial production of melt-polymerized PLA. We were able to undertake the efficient preparation of high-molecular-weight PLA on the 500-2000 g scale, via the selective and well-controlled polymerization of commercial polymer-grade l-lactide under challenging, industrially relevant conditions, and at metal concentrations as low as 8-12 ppm Zr by weight ([Zr] = 1.3 × 10-3 to 1.9 × 10-3 mol %). Under those conditions, a catalyst turnover number of at least 60,000 was attained, and the activity of the catalyst was comparable to that of tin(II) bis(2-ethylhexanoate).

Effective Ligand Design: Zinc Complexes with Guanidine Hydroquinoline Ligands for Fast Lactide Polymerization and Chemical Recycling

In this study, the synthesis of two new guanidine hydroquinoline ligands served as basis for six new zinc guanidine complexes. Two of these complexes showed very high activity in the lactide polymerization under industrial conditions. The lactide polymerization was demonstrated in solution and melt conditions observing high activity and molar masses up to 90 000 g mol-1 . Density functional theory studies elucidated the high activity of the complexes associated with the influence of the ligand backbone and the use of triflate counterions. On the way towards a circular economy, polymerization and depolymerization go hand in hand. So far, guanidine complexes have only shown their good activity in the ring opening polymerization of esters, and guanidine complexes with pure N donors have not been tested in recycling processes. Herein, the excellent ability of zinc guanidine complexes to catalyze both polymerization and depolymerization was demonstrated. The two most promising zinc complexes efficiently mediated the methanolysis of polylactide into methyl lactate under mild reaction conditions.

Master of Chaos and Order: Opposite Microstructures of PCL-co-PGA-co-PLA Accessible by a Single Catalyst

One catalyst, two reaction set-ups, three monomers and unlimited macromolecular microstructural designs: The iron guanidine complex [FeCl2 (TMG5NMe2 asme)] (1) polymerizes lactide faster than the industrially used Sn(Oct)2 and shows high activity towards glycolide and ϵ-caprolactone. Its distinguished features enable the synthesis of both block and random-like copolymers in the melt by a simple change of the polymerization set-up. Sequential addition of monomers yields highly ordered block copolymers including the symmetrical PLA-b-PGA-b-PCL-b-PGA-b-PLA pentablock copolymers, while polymerizations of monomer mixtures feature enhanced transesterifications and pave the way to di- and terpolymers with highly dispersed repeating unit distributions. A robust catalyst active under industrially applicable conditions and producing copolymers with desired microstructures is a major step towards biocompatible polymers with tailor-made properties as alternatives for traditional plastics on the way towards a sustainable, circular material flow.

Simple Zn(ii) complexes for the production and degradation of polyesters

Nine new complexes based on thioether appended iminophenolate (ONS) ligands have been prepared and fully characterized in solution by NMR spectroscopy. Solid-state structures were also obtained for seven complexes. In solution, all complexes were monomeric. The complexes were highly active for the polymerization of purified rac-lactide ([M] : [Zn] : [BnOH] = 10 000 : 1 : 30 at 180 °C) reaching TOF values up to 250 000 h-1. The kinetics of the polymerization have been probed by in situ Raman spectroscopy. The rate of reaction was dramatically reduced using technical grade rac-lactide with increased initiator loading. To move towards a circular economy, it is vital that catalysts are developed to facilitate chemical recycling of commodity and emerging polymeric materials. In this vein, the complexes have been assessed for their ability to break down poly(lactic acid) and poly(ethylene terephthalate). The results from both the polymerization and degradation reactions are discussed in terms of ligand functionality.

Zinc 8-aminotrihydroquinolines appended with pendant N-diphenylphosphinoethyl arms as exceptionally active catalysts for the ROP of ε-CL

Through activation with LiCH2SiMe3 or LiN(SiMe3)2, zinc(ii) chloride complexes bearing 5,6,7-trihydroquinolin-8-amines appended with pendant diphenyl phosphine units displayed remarkable catalytic activity for ROP of ε-caprolactone.

A Single Catalyst for Promoting Reverse Processes: Synthesis and Chemical Degradation of Polylactide

A simple zinc catalyst showing high activity for both the synthesis of polylactide, a biodegradable polymer produced from renewable feedstock, and its degradation was described. In the ring-opening polymerization of lactides, the zinc catalyst showed one of the highest activities reported in the literature for reactions carried out in solution at room temperature. This excellent performance was preserved even when the process was performed under industrial conditions: at high temperature, in the absence of solvent, and by using a low catalyst loading with unpurified monomers. The same complex revealed high efficiency also in depolymerization of polylactide by alcoholysis, a process that occurred efficiently at room temperature and in the absence of solvent, conditions that reduce costs and guarantee low environmental impact.

Active in Sleep: Iron Guanidine Catalyst Performs ROP on Dormant Side of ATRP

Copolymers are the answer to property limitations of homopolymers. In order to use the full variety of monomers available, catalysts active in more than one polymerization mechanism are currently investigated. Iron guanidine catalysts have shown to be extraordinarily active in ROP of lactide and herein prove their versatility by also promoting ATRP of styrene. The presented iron complex is the first polymerizing lactide and styrene simultaneously to a defined block copolymer in a convenient one-pot synthesis. Both mechanisms work hand in hand with ROP using the dominantly present FeII species on the dormant side of the ATRP equilibrium. This orthogonal copolymerization by a benign iron catalyst opens up new pathways to biocompatible polymerization procedures broadening the scope of ATRP applications.

The Green toxicology approach: Insight towards the eco-toxicologically safe development of benign catalysts

Green toxicology is a novel approach increasingly applied for the development of materials and chemicals that are more benign to the environment and human health than their conventional counterparts. It includes predictive eco-toxicological assessments of chemicals during the early developmental process to exclude adverse effects. In the present study, two guanidine zinc catalysts for the ring-opening polymerization of lactide were investigated using eco-toxicological tools. Namely, the fish embryo toxicity assay for teratogenic effects, the ER (α) CALUX assay for endocrine activity and the Ames fluctuation assay for mutagenic potential were applied. Both complexes showed no endocrine activity, mutagenicity or acute aquatic toxicity, however a delayed hatch could be observed, therefore suggesting potential effects on a molecular level. This proof-of-concept study aims to assess the toxicity of guanidine zinc catalysts and is a first step towards the incorporation of toxicological assessments into chemical developmental processes to achieve a sustainable and safe production of catalysts.

Efficient Bulky Organo-Zinc Scorpionates for the Stereoselective Production of Poly(rac-lactide)s

The direct reaction of the highly sterically demanding acetamidinate-based NNN'-scorpionate protioligand Hphbp^tamd [Hphbp^tamd = N,N'-di-p-tolylbis(3,5-di-tertbutylpyrazole-1-yl)acetamidine] with one equiv. of ZnMe₂ proceeds in high yield to the mononuclear alkyl zinc complex [ZnMe(κ³-phbp^tamd)] (1). Alternatively, the treatment of the corresponding lithium precursor [Li(phbp^tamd)(THF)] with ZnCl₂ yielded the halide complex [ZnCl(κ³-phbptamd)] (2). The X-ray crystal structure of 1 confirmed unambiguously a mononuclear entity in these complexes, with the zinc centre arranged with a pseudotetrahedral environment and the scorpionate ligand in a κ³-coordination mode. Interestingly, the inexpensive, low-toxic and easily prepared complexes 1 and 2 resulted in highly efficient catalysts for the ring-opening polymerisation of lactides, a sustainable bio-resourced process industrially demanded. Thus, complex 1 behaved as a single-component robust initiator for the living and immortal ROP of rac-lactide under very mild conditions after a few hours, reaching a TOF value up to 5520 h^-1 under bulk conditions. Preliminary kinetic studies revealed apparent zero-order dependence on monomer concentration in the absence of a cocatalyst. The PLA materials produced exhibited narrow dispersity values, good agreement between the experimental M_n values and monomer/benzyl alcohol ratios, as well as enhanced levels of heteroselectivity, reaching P_s values up to 0.74.

Make or break: Mg(ii)- and Zn(ii)-catalen complexes for PLA production and recycling of commodity polyesters

A series of Mg(ii) and Zn(ii) catalen complexes have been prepared for PLA formation and recycling.

Next Generation of Zinc Bisguanidine Polymerization Catalysts towards Highly Crystalline, Biodegradable Polyesters

Polylactide and polycaprolactone are both biodegradable polymers produced through metal-catalyzed ring-opening polymerization. For a truly sustainable lifecycle of these polymers it is essential to replace the industrially used cytotoxic catalyst tin(II) bis(2-ethylhexanoate) [Sn(Oct)₂ ] with non-toxic alternatives. Here, we report the fastest known robust catalyst in the polymerization of lactide and ϵ-caprolactone. This zinc guanidine catalyst can polymerize non-purified technical rac-lactide and ϵ-caprolactone in the melt at different [M]/[I] ratios with fast rate constants, high molar masses, and high yields in a short time, leading to colorless, transparent polymer. Moreover, we report that polylactide and polycaprolactone produced by zinc-guanidine complexes have favorably high crystallinities. In fact, the obtained polylactide shows a more robust degradation profile than its Sn(Oct)₂ -catalysed equivalent due to a higher degree of crystallinity.

Robust Guanidine Metal Catalysts for the Ring-Opening Polymerization of Lactide under Industrially Relevant Conditions

The increasing awareness of sustainability has led to enormous growth of the demand for bio-based and biodegradable polymers such as poly(lactide) (PLA). In industry, polymerization of lactide is currently carried out using tin catalysts (e. g., tin(II) ethyl hexanoate, Sn(Oct)₂ ). Since the catalyst remains in the polymer, it can accumulate in the soil or in the human body after degradation and cause damage due to its toxicity. Therefore, a search for a suitable substitute for this catalyst has been going on for decades. Guanidine metal complexes prove to be excellent catalysts in the polymerization of lactide. They are not only convincing because of their activity and the synthesis of high molar mass polymers, but also show a high robustness against high temperatures, oxidation as well as residual protic impurities in the monomer. Herein, key zinc and iron guanidine complexes are discussed with respect to their apparent rate constant (k_app ) and rate constant of propagation (k_p ), produced molar masses and the mechanism involved.

Synthesis and characterization of guanidinate tin(ii) complexes for ring-opening polymerization of cyclic esters

Novel homoleptic and heteroleptic (guanidinate)tin(ii) complexes were successfully synthesized and structurally characterized. The first heteroleptic (guanidinato)tin(ii) alkoxide complex was synthesized but found to be unstable leading to the corresponding bis(guanidinate)tin(ii) complex. The catalytic activities of bis(guanidinate)tin(ii) complexes having different substituents at the nitrogen atoms (isopropyl (1), cyclohexyl (2), and p-tolyl (3)) were investigated in the ring-opening polymerization (ROP) of ε-caprolactone (ε-CL) and lactide (LA). The lone-pair electrons of the tin(ii) atom were proposed to act as an initiator similar to N-heterocyclic carbenes. Among the synthesized catalysts, complex 1 having less steric hindrance efficiently catalyzed both homo- and copolymerizations of ε-CL and LA giving high molecular weight cyclic polyesters. Transesterification was found to be the major contributor to the cyclization to cyclic polyesters.

Online tracing of molecular weight evolution during radical polymerization via high-resolution FlowNMR spectroscopy

High-resolution FlowNMR was coupled to a continuous flow reactor to monitor polymer molecular weight evolution online by diffusion ordered NMR spectroscopy.

Syntheses, structures and catalytic activity of tetranuclear Mg complexes in the ROP of cyclic esters under industrially relevant conditions

Tetranuclear magnesium imino(phenolate) complexes Mg₄(L^1–4)₄ are excellent catalysts for the ROP of bulk rac-lactide and ε-caprolactone under industrially relevant conditions.

Mono- and dimeric zinc(ii) complexes for PLA production and degradation into methyl lactate – a chemical recycling method

A series of well-defined mono- and dimeric Zn(ii)-complexes were prepared and fully characterised by X-ray crystallography and NMR spectroscopy.

Novel hybrid aluminium(iii)–catalen complexes as highly active catalysts for lactide polymerisation: towards industrial relevance

A series of novel Al(iii) complexes are prepared that show remarkable activity under the industrially preferred conditions.

Zinc Complexes for PLA Formation and Chemical Recycling: Towards a Circular Economy

A series of Zn^II complexes, based on propylenediamine Schiff bases, have been prepared and fully characterized. X-ray crystallography and NMR spectroscopy identified significant differences in the solid and solution state for the Zn^II species. All complexes have been applied to the ring-opening polymerization of l-lactide with emphasis on industrial conditions. High conversion and good molecular weight control were generally achievable for Zn(A-D)₂ , and high-molecular-weight poly(lactic acid) (PLA) was prepared in 1 min at a 10 000:1:33 [lactide]/[Zn]/[BnOH] loading. The more active Zn^II catalysts were also applied to PLA degradation to alkyl lactate under mild conditions. Zn(A-B)₂ demonstrated high activity and selectivity in this process with PLA being consumed within 1 h at 50 °C. Zn(C-D)₂ were shown to be less active, and these observations can be related to the catalysts' structure and the degradation mechanism. Initial results for the degradation of poly(ethylene terephthalate) and mixed feeds are also presented, highlighting the broader applicability of the systems presented.

Undiscovered Potential: Ge Catalysts for Lactide Polymerization

Polylactide (PLA) is a high potential bioplastic that can replace oil-based plastics in a number of applications. To date, in spite of its known toxicity, a tin catalyst is used on industrial scale which should be replaced by a benign catalyst in the long run. Germanium is known to be unharmful while having similar properties as tin. Only few germylene catalysts are known so far and none has shown the potential for industrial application. We herein present Ge complexes in combination with zinc and copper, which show amazingly high polymerization activities for lactide in bulk at 150 °C. By systematical variation of the complex structure, proven by single-crystal XRD and DFT calculations, structure-property relationships are found regarding the polymerization activity. Even in the presence of zinc and copper, germanium acts as the active site for polymerizing probably through the coordination-insertion mechanism to high molar mass polymers.

Towards New Robust Zn(II) Complexes for the Ring-Opening Polymerization of Lactide Under Industrially Relevant Conditions

The synthesis of bio-based and biodegradable plastics is a hot topic in research due to growing environmental problems caused by omnipresent plastics. As a result, polylactide, which has been known for years, has seen a tremendous increase in industrial production. Nevertheless, the manufacturing process using the toxic catalyst Sn(Oct)2 is very critical. As an alternative, five zinc acetate complexes have been synthesized with Schiff base-like ligands that exhibit high activity in the ring-opening polymerization of non-purified lactide. The systems bear different side arms in the ligand scaffold. The influence of these substituents has been analyzed. For a detailed description of the catalytic activities, the rate constants k app and k p were determined using in-situ Raman spectroscopy at a temperature of 150 °C. The polymers produced have molar masses of up to 71 000 g mol-1 and are therefore suitable for a variety of applications. Toxicity measurements carried out for these complexes proved the nontoxicity of the systems.

Heterolepic β-Ketoiminate Zinc Phenoxide Complexes as Efficient Catalysts for the Ring Opening Polymerization of Lactide

Zinc phenoxide complexes L1ZnOAr 1-4 (L1=Me2NC2H4NC(Me)CHC(Me)O) and L2ZnOAr 5-8 (L2=Me2NC3H6NC(Me)CHC(Me)O) with donor-functionalized β-ketoiminate ligands (L1/2) and OAr substituents (Ar=Ph 1, 5; 2,6-Me2-C6H3 2, 6; 3,5-Me2-C6H3 3, 7; 4-Bu-C6H4 4, 8) with tuneable electronic and steric properties were synthesized and characterized. 1-8 adopt binuclear structures in the solid state except for 5, while they are monomeric in CDCl3 solution. 1-8 are active catalysts for the ring opening polymerization (ROP) of lactide (LA) in CH2Cl2 at ambient temperature and the catalytic activity is controlled by the electronic and steric properties of the OAr substituent, yielding polymers with high average molecular weight (M n) and moderately controlled molecular weight distribution (MWDs). 1 and 5 showed a living polymerization character and kinetic studies on the ROP of L-LA with 1 and 5 proved first order dependencies on the monomer concentration. Homonuclear decoupled 1H-NMR analyses of polylactic acid (PLA) formed with rac-LA proved isotactic enrichment of the PLA microstructure.

New Kids in Lactide Polymerization: Highly Active and Robust Iron Guanidine Complexes as Superior Catalysts

Polylactide is a biodegradable versatile material based on annually renewable resources and thus CO₂ -neutral in its lifecycle. Until now, tin(II)octanoate [Sn(Oct₂ )] was used as catalyst for the industrial ring-opening polymerization of lactide in spite of its cytotoxicity. On the way towards a sustainable catalyst, three iron(II) hybrid guanidine complexes were investigated concerning their molecular structure and applied to the ring-opening polymerization of lactide. The complexes could polymerize unpurified technical-grade rac-lactide as well as recrystallized l-lactide to long-chain polylactide in bulk with monomer/initiator ratios of more than 5000:1 in a controlled manner following the coordination-insertion mechanism. For the first time, a biocompatible complex has surpassed Sn(Oct)₂ in its polymerization activity under industrially relevant conditions.

N-Heterocyclic Carbene Adducts of Main Group Elements and Their Use as Ligands in Transition Metal Chemistry

N-Heterocyclic carbenes (NHC) are nowadays ubiquitous and indispensable in many research fields, and it is not possible to imagine modern transition metal and main group element chemistry without the plethora of available NHCs with tailor-made electronic and steric properties. While their suitability to act as strong ligands toward transition metals has led to numerous applications of NHC complexes in homogeneous catalysis, their strong σ-donating and adaptable π-accepting abilities have also contributed to an impressive vitalization of main group chemistry with the isolation and characterization of NHC adducts of almost any element. Formally, NHC coordination to Lewis acids affords a transfer of nucleophilicity from the carbene carbon atom to the attached exocyclic moiety, and low-valent and low-coordinate adducts of the p-block elements with available lone pairs and/or polarized carbon-element π-bonds are able to act themselves as Lewis basic donor ligands toward transition metals. Accordingly, the availability of a large number of novel NHC adducts has not only produced new varieties of already existing ligand classes but has also allowed establishment of numerous complexes with unusual and often unprecedented element-metal bonds. This review aims at summarizing this development comprehensively and covers the usage of N-heterocyclic carbene adducts of the p-block elements as ligands in transition metal chemistry.

Tuning a robust system: N,O zinc guanidine catalysts for the ROP of lactide

Non-toxic, highly active and robust complexes are the holy grail as ideal green catalysts for the polymerisation of biorenewable and biodegradable polylactide. Four new zinc guanidine complexes [ZnCl2(TMG4NMe2asme)], [ZnCl2(TMG5Clasme)], [ZnCl2(TMG5Measme)] and [ZnCl2(TMG5NMe2asme)] with different electron-donating and electron-withdrawing groups on the ligand's aromatic backbone have been synthesised. Ligands are derived from low-cost commercially available compounds and have been converted by a three- or four-step synthesis process into the desired ligand in good yields. The compounds have been fully characterised and tested in the ROP of rac-LA under industrially relevant conditions. The complexes are based on the recently published structure [ZnCl2(TMGasme)] which has shown high activity in the polymerisation of lactide at 150 °C. Different substituents in the para-position of the guanidine moiety significantly increase the polymerisation rate whereas positioning substituents in the meta-position causes no change in the reaction rate. With molecular weights over 71 000 g mol-1 being achievable, the best system produces polymers for multiple industrial applications and its polymerisation rate approaches that of Sn(Oct)2. The robust systems are able to polymerise non-purified lactide. The initiation of the polymerisation is suggested to occur due to impurities in the monomer.

Metal-catalysed reactions enabled by guanidine-type ligands

A review of metal–guanidine complexes, which are selective and powerful catalysts for organic transformations, asymmetric synthesis, and polymerisation.

Highly active Mg(ii) and Zn(ii) complexes for the ring opening polymerisation of lactide

Simple, highly active, Zn(ii) and Mg(ii) complexes for the industrial ring opening polymerisation (ROP) of lactide.