Selective and Efficient Iridium Catalyst for the Reductive Amination of Levulinic Acid into Pyrrolidones

Construction of N-Aryl-Substituted Pyrrolidines by Successive Reductive Amination of Diketones via Transfer Hydrogenation

N-aryl-substituted pyrrolidines are important moieties widely found in bioactive substances and drugs. Herein, we present a practical reductive amination of diketones with anilines for the synthesis of N-aryl-substituted pyrrolidines in good to excellent yields. In this process, the N-aryl-substituted pyrrolidines were furnished via successive reductive amination of diketones via iridium-catalyzed transfer hydrogenation. The scale-up performance, water as a solvent, simple operation, as well as derivation of drug molecules showcased the potential application in organic synthesis.

Catalytic Conversion of Levulinic Acid to Pyrrolidone under Mild Conditions with Disordered Mesoporous Silica-Supported Pt Catalyst

Catalytic conversion of biomass-derived levulinic acid (LA) into high-valued 5-methylpyrrolidones has become an attractive case in studies of biomass utilization. Herein, we developed a disordered mesoporous Pt/MNS catalyst for this reductive amination process under room temperature and atmospheric pressure of hydrogen. The disordered mesoporous structures in support of Pt/MNS catalyst led the formation of highly dispersed Pt species via confinement effect, providing high specific area for enhancing the catalytic sites. With the synergistic effect between highly dispersed Pt species and mesoporous structures, 5-methylpyrrolidones were successfully synthesized from biomass-derived LA and primary amines with high selectivity. Mechanism studies indicated that introducing protonic acid would promote the reductive-amination process, and enamine intermediates could be detected during the in-situ DRIFT tests. Density functional theory (DFT) calculation confirmed that the hydrogenation of enamine intermediate was more accessible than that of imide intermediates, leading the excellent performance of the Pt/MNS catalyst. This work provided a green method to produce 5-methylpyrrolidone and revealed the impact of catalyst structural characteristics on the reaction process.

Cobalt-Catalyzed Chemodivergent Synthesis of Cyclic Amines and Lactams from Ketoacids and Anilines Using Hydrosilylation

Here, commercially available Co2(CO)8 was utilized as an efficient catalyst for chemodivergent synthesis of pyrrolidines and pyrrolidones from levulinic acid and aromatic amines under slightly different hydrosilylation conditions. 1.5 and 3 equiv of phenylsilane selectively yielded pyrrolidone and pyrrolidine, respectively. Various ketoacids and amines were successfully tested. Plausible mechanism involves the condensation of levulinic acid and amine to form an imine, which cyclizes to 3-pyrrolidin-2-one followed by reduction to pyrrolidone. The final reduction of pyrrolidone gave pyrrolidine.

Synthesis and catalytic activity of well-defined Co(I) complexes based on NHC-phosphane pincer ligands

A new methodology for the preparation of Co(I)-NHC (NHC = N-heterocyclic carbene) complexes, namely, [Co(PCNHCP)(CO)2][Co(CO)4] (1) and [Co(PCNHCP)(CO)2]BF4 (2), has been developed (PCNHCP = 1,3-bis(2-(diphenylphosphanyl)ethyl)-imidazol-2-ylidene). Both complexes can be straightforwardly prepared by direct reaction of their parent imidazolium salts with the Co(0) complex Co2(CO)8. Complex 1 efficiently catalyses the reductive amination of furfural and levulinic acid employing silanes as reducing agents under mild conditions. Furfural has been converted into a variety of secondary and tertiary amines employing dimethyl carbonate as the solvent, while levulinic acid has been converted into pyrrolidines under solventless conditions. Dehydrocoupling of the silane to give polysilanes has been observed to occur as a side reaction of the hydrosilylation process.

Polymers without Petrochemicals: Sustainable Routes to Conventional Monomers

Access to a wide range of plastic materials has been rationalized by the increased demand from growing populations and the development of high-throughput production systems. Plastic materials at low costs with reliable properties have been utilized in many everyday products. Multibillion-dollar companies are established around these plastic materials, and each polymer takes years to optimize, secure intellectual property, comply with the regulatory bodies such as the Registration, Evaluation, Authorisation and Restriction of Chemicals and the Environmental Protection Agency and develop consumer confidence. Therefore, developing a fully sustainable new plastic material with even a slightly different chemical structure is a costly and long process. Hence, the production of the common plastic materials with exactly the same chemical structures that does not require any new registration processes better reflects the reality of how to address the critical future of sustainable plastics. In this review, we have highlighted the very recent examples on the synthesis of common monomers using chemicals from sustainable feedstocks that can be used as a like-for-like substitute to prepare conventional petrochemical-free thermoplastics.

A Catalyst and Solvent Free Route for the Synthesis of N-Substituted Pyrrolidones from Levulinic Acid

An efficient, metal-free, catalyst-free and solvent-free methodology for the reductive amination of levulinic acid with different anilines has been developed using HBpin as the reducing reagent. This protocol offers an excellent method to avoid solvents and added catalysts on the synthesis of different kinds of N-substituted pyrrolidones under metal free conditions. It is also the first report for the synthesis of different pyrrolidones by solvent-free as well as catalyst-free methods. The proposed mechanism for the formation of pyrrolidone has been supported by DFT calculations and control experiments.

Computational Chemistry-Assisted Highly Selective Radical Cascade Cyclization of 1,6-Enynes with Thiols: Access to Sulfur-Substituted 4-Enyl-2-Pyrrolidones

In this study, an efficient method for the synthesis of sulfur-substituted 4-enyl-2-pyrrolidones was successfully developed through AIBN-promoted highly selective 5-exo-dig radical cascade cyclization of 1,6-enynes with sulfur sources with the aid of theoretical and computational chemistry. This protocol enables the first practical and green synthesis of an array of 4-enyl-2-pyrrolidones in moderate-to-good yields with broad substrate scopes and high regioselectivities (>20:1). Moreover, excellent stereoselectivities have also been achieved (up to >20:1, Z/E). Most interestingly, when the sulfur source is electron-rich thiophenol, reverse stereoselectivities were discovered. In addition, the control experiments indicate that the cascade cyclization is realized by radical reactions, and the detailed reaction mechanism and regioselectivities have also been explained by theoretical studies.

Dicarbonyl compounds in the synthesis of heterocycles under green conditions

Carbon–carbon and carbon-heteroatom bond forming reactions are strategically employed for the generation of a variety of heterocyclic systems. This class of compounds represents the most general structural unit, present in many natural compounds. They are recognized for their valuable biologically properties and wide range of applications in medicinal, pharmaceutical, and other related fields of chemistry. This is an updated review on the use of dicarbonyl compounds under environmentally friendly conditions to access a series of heterocyclic structures, e.g., quinoxaline, quinazolinones, benzochalcogenazoles, indoles, among others. Synthetic protocols involving copper-catalyzed, multicomponent and cascade reactions, decarboxylative cyclization, recycling of CO2, and electrochemical approaches are presented and discussed.

Insights into Cascade and Sequential one pot pathways for reductive amination of aldehydes paired with bio-derived levulinic acid to N-substituted pyrrolidones using molecular hydrogen

This work aims to explore cascade and sequential one pot syntheses pathways for N-substituted pyrrolidones from aryl aldehydes and bio-derived levulinic acid (LA) using molecular hydrogen and ammonia. This process...

Catalytic applications of zwitterionic transition metal compounds

This frontiers article highlights recent developments on the application of transition metal-based zwitterionic complexes in catalysis. Recent applications of selected zwitterionic catalysts in polymerization reactions, including the carbonylative polymerization of cyclic ethers, carbon-carbon coupling reactions, the asymmetric hydrogenation of unfunctionalized olefins, and the hydrofunctionalization of alkenes are reviewed. In addition, advances in the field of hydrogenation/dehydrogenation reactions related to energy applications, including the hydrogenation of CO₂ and the dehydrogenation of formic acid and N-heterocycles, the functionalization of CO₂ with amines and hydrosilanes, and the valorization of polyfunctional bio-based feedstocks, such as the dehygrogenation of glycerol to lactic acid or the reduction of levulinic acid into γ-valerolactone, are also described.

Metal-Free Cascade Formation of Intermolecular C-N Bonds Accessing Substituted Isoindolinones under Cathodic Reduction

An electrochemical protocol for the construction of substituted isoindolinones via reduction/amidation of 2-carboxybenzaldehydes and amines has been realized. Under metal-free and external-reductant-free electrolytic conditions, the reaction achieves the cascade formation of intermolecular C-N bonds and provides a series of isoindolinones in moderate to good yields. The deuterium-labeling experiment proves that the hydrogen in the methylene of the product is mainly provided by H₂O in the system.

Formic Acid as a Potential On-Board Hydrogen Storage Method: Development of Homogeneous Noble Metal Catalysts for Dehydrogenation Reactions

Hydrogen can be used as an energy carrier for renewable energy to overcome the deficiency of its intrinsically intermittent supply. One of the most promising application of hydrogen energy is on-board hydrogen fuel cells. However, the lack of a safe, efficient, convenient, and low-cost storage and transportation method for hydrogen limits their application. The feasibility of mainstream hydrogen storage techniques for application in vehicles is briefly discussed in this Review. Formic acid (FA), which can reversibly be converted into hydrogen and carbon dioxide through catalysis, has significant potential for practical application. Historic developments and recent examples of homogeneous noble metal catalysts for FA dehydrogenation are covered, and the catalysts are classified based on their ligand types. The Review primarily focuses on the structure-function relationship between the ligands and their reactivity and aims to provide suggestions for designing new and efficient catalysts for H₂ generation from FA.

Transition-Metal-Catalyzed Reductive Amination Employing Hydrogen

The reductive amination, the reaction of an aldehyde or a ketone with ammonia or an amine in the presence of a reducing agent and often a catalyst, is an important amine synthesis and has been intensively investigated in academia and industry for a century. Besides aldehydes, ketones, or amines, starting materials have been used that can be converted into an aldehyde or ketone (for instance, carboxylic acids or organic carbonate or nitriles) or into an amine (for instance, a nitro compound) in the presence of the same reducing agent and catalyst. Mechanistically, the reaction starts with a condensation step during which the carbonyl compound reacts with ammonia or an amine, forming the corresponding imine followed by the reduction of the imine to the alkyl amine product. Many of these reduction steps require the presence of a catalyst to activate the reducing agent. The reductive amination is impressive with regard to the product scope since primary, secondary, and tertiary alkyl amines are accessible and hydrogen is the most attractive reducing agent, especially if large-scale product formation is an issue, since hydrogen is inexpensive and abundantly available. Alkyl amines are intensively produced and use fine and bulk chemicals. They are key functional groups in many pharmaceuticals, agro chemicals, or materials. In this review, we summarize the work published on reductive amination employing hydrogen as the reducing agent. No comprehensive review focusing on this subject has been published since 1948, albeit many interesting summaries dealing with one or the other aspect of reductive amination have appeared. Impressive progress in using catalysts based on earth-abundant metals, especially nanostructured heterogeneous catalysts, has been made during the early development of the field and in recent years.

2,2'-Dipyridylamines: more than just sister members of the bipyridine family. Applications and achievements in homogeneous catalysis and photoluminescent materials

2,2'-Dipyridylamines (dpa) and related compounds belong to the family of polydentate nitrogen ligands. More than a century has passed since their first report but new complexes and applications have been emerging in recent years owing to the versatility of dpa-based architectures. This review aims to present and highlight the main achievements attained with dpa-containing metal complexes in the domains of homogeneous catalysis and luminescent materials.

Reductive Amination/Cyclization of Methyl Levulinate with Aspartic Acid: Towards Renewable Polyesters with a Pendant Lactam Unit

Environmental regulation and depletion of fossil resources are boosting the search for new polymeric materials produced from biomass. Here, the synthesis of a new diester bearing a pendant lactam unit from methyl levulinate and aspartic acid is reported. The palladium-catalyzed reductive amination/cyclization sequence was carefully optimized to afford the diacid with high yield (>95 %). In a second step, the compound was esterified to give the corresponding diester. The latter monomer was copolymerized with α-ω linear diols, yielding polyesters with molecular weights up to 20.5 kg mol^-1 .

A Multiphase Protocol for Selective Hydrogenation and Reductive Amination of Levulinic Acid with Integrated Catalyst Recovery

At 60-150 °C and 15-35 bar H₂ , two model reactions of levulinic acid (LA), hydrogenation and reductive amination with cyclohexylamine, were explored in a multiphase system composed of an aqueous solution of reactants, a hydrocarbon, and commercial 5 % Ru/C as a heterogeneous catalyst. By tuning the relative volume of the immiscible water/hydrocarbon phases and the concentration of the aqueous solution, a quantitative conversion of LA was achieved with formation of γ-valerolactone or N-(cyclohexylmethyl)pyrrolidone in >95 and 88 % selectivity, respectively. Additionally, the catalyst could be segregated in the hydrocarbon phase and recycled in an effective semi-continuous protocol. Under such conditions, formic acid additive affected the reactivity of LA through a competitive adsorption on the catalyst surface. This effect was crucial to improve selectivity for the reductive amination process. The comparison of 5 % Ru/C with a series of carbon supports demonstrated that the segregation phenomenon in the hydrocarbon phase, never previously reported, was pH-dependent and effective for samples displaying a moderate surface acidity.

Iridium-Catalyzed Hydrogenation and Dehydrogenation of N-Heterocycles in Water under Mild Conditions

An efficient catalytic method is presented for the hydrogenation of N-heterocycles. The iridium-based catalyst operates under mild conditions in water without any co-catalyst or stoichiometric additives. The catalyst also promotes the reverse reaction of dehydrogenation of N-heterocycles, hence displaying appropriate characteristics for a future hydrogen economy based on liquid organic hydrogen carriers (LOHCs).

Formic acid as a hydrogen source for the iridium-catalyzed reductive amination of levulinic acid and 2-formylbenzoic acid

A robust iridium catalyst performs the reductive amination of the renewable levulinic acid and of 2-formylbenzoic acid in water under mild conditions. This catalyst tolerates very bulky reagents.

The catalytic behaviour in aqueous-phase hydrogenation over a renewable Ni catalyst derived from a perovskite-type oxide

Water is inevitably associated with the production of bio-derived platform molecules, but most supported metallic catalysts have poor water compatibility. Although there have been a great number of investigations regarding the hydrogenation of bio-derived unsaturated compounds in the organic phase, the reactions that proceed in water are still quite challenging. Herein, we report the synthesis of a supported nickel catalyst (Ni-LN650) by the reduction of the perovskite-type oxide LaNiO₃ precursor at 650 °C. The derived catalyst affords attractive activity in the hydrogenation of furfural by using water as the reaction medium, in which furfural is completely converted into tetrahydrofurfuryl alcohol with the highest productivity of 289.7 mmol g_Ni^-1 h^-1 at 120 °C and 1 MPa of H₂ within 5 h of reaction. The Ni-LN650 catalyst also exhibits good stability and renewability in a cycle test, stemming from the self-regeneration peculiarity of the perovskite-type oxide precursor. Moreover, the catalyst can also demonstrate high activity in the aqueous-phase hydrogenation of various aldehydes, alkenes and carboxylic acids in a series of experiments. Due to the merits of usability in water, the renewability and wide application scope, the Ni-LN650 catalyst can be treated as a promising candidate for the catalytic conversion of bio-derived platform molecules into high value-added fuels and chemicals.

Tailored Cobalt-Catalysts for Reductive Alkylation of Anilines with Carboxylic Acids under Mild Conditions

The first cobalt-catalyzed hydrogenative N-methylation and alkylation of amines with readily available carboxylic acid feedstocks as alkylating agents and H₂ as ideal reductant is described. Combination of tailor-made triphos ligands with cobalt(II) tetrafluoroborate significantly improved the efficiency, thus promoting the reaction under milder conditions. This novel protocol allows for a broad substrate scope with good functional group tolerance, even in the presence of reducible alkenes, esters, and amides.

Reductive N-alkylation of primary and secondary amines using carboxylic acids and borazane under mild conditions

An expedient strategy of reductive N-alkylation of amines with readily available carboxylic acids as alkylating reagents has been developed.