Catalytic Transformation of Cellulose and Its Derivatives into Functionalized Organic Acids

Multifunctional Catalysts for Cascade Reactions in Biomass Processing

Multifunctional catalysts have received considerable attention in the cascade reactions of biomass processing. A cascade (or tandem) reaction is realized when multiple reaction steps that require different catalysts are performed in a one-step process. These reactions require bi- or multifunctional catalysts or catalyst mixtures to serve successfully at each reaction step. In this review article, we discuss the major factors of the catalyst design influencing the structure-property relationships, which could differ depending on the catalyst type. The major factors include the amounts and strengths of acidic and basic sites, interactions between those and metal sites, synergetic effects, nanoparticle sizes and morphology, nanostructures, porosity, etc. The catalysts described in this review are based on zeolites, mesoporous solids, MOFs, and enzymes. The importance of continuous cascade processes is also examined.

Light-Driven Depolymerization of Cellulosic Biomass into Hydrocarbons

Cellulose and hemicellulose are the main constituents of lignocellulosic biomass. Chemical derivatization of lignocellulosic biomass leads to a range of C5 and C6 organic compounds. These C5 and C6 compounds are valuable precursors (or fine chemicals) for developing sustainable chemical processes. Therefore, depolymerization of cellulose and hemicellulose is essential, leading to the development of various materials that have applications in biomaterial industries. However, most depolymerized processes for cellulose have limited success because of its structural quality: crystallinity, high hydrogen-bond networking, and mild solubility in organic and water. As a result, various chemical treatments, acidic (mineral or solid acids) and photocatalysis, have developed. One of the significant shortcomings of acidic treatment is that the requirement for high temperatures increases the commercial end cost (energy) and hampers product selectivity. For example, a catalyst with prolonged exposure to high temperatures damages the catalyst surface over time; therefore, it cannot be used for iterative cycles. Photocatalysts provide ample application to overcome such flaws as they do not require high temperatures to perform efficient catalysis. Various photocatalysts have shown efficient cellulosic biomass conversion into its C6 and C5 hydrocarbons and the production of hydrogen (as a green energy component). For example, TiO2-based photocatalysts are the most studied for biomass valorization. Herein, we discussed the feasibility of a photocatalyst with application to cellulosic biomass hydrolysis.

Combined dehydrogenation of glycerol with catalytic transfer hydrogenation of H2 acceptors to chemicals: Opportunities and challenges

Catalytic transformation of low-cost glycerol to value-added lactic acid (LA) is considered as one of the most promising technologies for the upgradation of glycerol into renewable products. Currently, research studies reveal that anaerobic transformation of glycerol to LA could also obtain green H₂ with the same yield of LA. However, the combined value-added utilization of released H₂ with high selectivity of LA during glycerol conversion under mild conditions still remains a grand challenge. In this perspective, for the first time, we conducted a comprehensive and critical discussion on current strategies for combined one-pot/tandem dehydrogenation of glycerol to LA with catalytic transfer hydrogenation of H₂ acceptors (such as CO₂) to other chemicals. The aim of this overview was to provide a general guidance on the atomic economic reaction pathway for upgrading low-cost glycerol and CO₂ to LA as well as other chemicals.

Cellulose derived Pd nano-catalyst for efficient catalysis

Using green, environmentally friendly and resource-rich cellulose as a raw material, a ligand-free and highly dispersed palladium (Pd) nano-catalyst was successfully prepared in a facile way. A variety of characterization results showed that the Pd nanoparticles (NPs) were uniformly spread on the cellulose nanoporous microspheres, with an average particle size of ∼2.75 nm. As a carrier, cellulose microspheres with nanoporous structure and rich -OH groups greatly promoted the attachment and distribution of the highly dispersed Pd NPs, along with the diffusion and exchange of reactants, so as to greatly promote the catalytic activity. In the Suzuki-Miyaura coupling reaction, the catalyst of C-Pd exhibited excellent catalytic activity (TOF up to 2126 h-1), broad applicability, and good recyclability with almost no active loss in 6 continuous runs. This utilizing of bioresources to build catalyst materials is important for sustainable chemistry.

Catalytic Pyrolysis of Lignin Model Compounds (Pyrocatechol, Guaiacol, Vanillic and Ferulic Acids) over Nanoceria Catalyst for Biomass Conversion

Understanding the mechanisms of thermal transformations of model lignin compounds (MLC) over nanoscale catalysts is important for improving the technologic processes occurring in the pyrolytic conversion of lignocellulose biomass into biofuels and value-added chemicals. Herein, we investigate catalytic pyrolysis of MLC (pyrocatechol (P), guaiacol (G), ferulic (FA), and vanillic acids (VA)) over nanoceria using FT-IR spectroscopy, temperature-programmed desorption mass spectrometry (TPD MS), and thermogravimetric analysis (DTG/DTA/TG). FT-IR spectroscopic studies indicate that the active groups of aromatic rings of P, G, VA, and FA as well as carboxylate groups of VA and FA are involved in the interaction with nanoceria surface. We explore the general transformation mechanisms of different surface complexes and identify their decomposition products. We demonstrate that decomposition of carboxylate acid complexes occurs by decarboxylation. When FA is used as a precursor, this reaction generates 4-vinylguaiacol. Complexes of VA and FA formed through both active groups of the aromatic ring and decompose on the CeO2 surface to generate hydroxybenzene. The formation of alkylated products accompanies catalytic pyrolysis of acids due to processes of transalkylation on the surface.

Efficient Catalysts for the Green Synthesis of Adipic Acid from Biomass

Green synthesis of adipic acid from renewable biomass is a very attractive goal of sustainable chemistry. Herein, we report efficient catalysts for a two-step transformation of cellulose-derived glucose into adipic acid via glucaric acid. Carbon nanotube-supported platinum nanoparticles are found to work efficiently for the oxidation of glucose to glucaric acid. An activated carbon-supported bifunctional catalyst composed of rhenium oxide and palladium is discovered to be powerful for the removal of four hydroxyl groups in glucaric acid, affording adipic acid with a 99 % yield. Rhenium oxide functions for the deoxygenation but is less efficient for four hydroxyl group removal. The co-presence of palladium not only catalyzes the hydrogenation of olefin intermediates but also synergistically facilitates the deoxygenation. This work presents a green route for adipic acid synthesis and offers a bifunctional-catalysis strategy for efficient deoxygenation.

Electro-Descriptors for the Performance Prediction of Electro-Organic Synthesis

Electrochemical organic synthesis has attracted increasing attentions as a sustainable and versatile synthetic platform. Quantitative assessment of the electro-organic reactions, including reaction thermodynamics, electro-kinetics, and coupled chemical processes, can lead to effective analytical tool to guide their future design. Herein, we demonstrate that electrochemical parameters such as onset potential, Tafel slope, and effective voltage can be utilized as electro-descriptors for the evaluation of reaction conditions and prediction of reactivities (yields). An "electro-descriptor-diagram" is generated, where reactive and non-reactive conditions/substances show distinct boundary. Successful predictions of reaction outcomes have been demonstrated using electro-descriptor diagram, or from machine learning algorithms with experimentally-derived electro-descriptors. This method represents a promising tool for data-acquisition, reaction prediction, mechanistic investigation, and high-throughput screening for general organic electro-synthesis.

Valorization of Cellulose Recovered from WWTP Sludge to Added Value Levulinic Acid with a Brønsted Acidic Ionic Liquid

The progressive decline of using fossil sources in the industry means that alternative resources must be found to produce chemicals. Waste biomass (sewage sludge) and waste lignocellulosic resources (food, forestry, or paper industries) are ideal candidates to take over from fossil sources. Municipal sewage sludge, and especially primary sludge, has a significant proportion of cellulose in its composition. Proper treatment of this cellulose allows the production of interesting chemicals like levulinic acid that are precursors (bio-blocks or building blocks) for other organic chemical processes. Cellulose was extracted from municipal wet primary sludge and paper industry dried sludge with a commercial ionic liquid. More than 99% of the cellulose has been recovered in both cases. Extraction was followed by the bleaching of the cellulose for its purification. In the bleaching, a large part of the ash was removed (up to 70% with municipal sludge). Finally, the purified cellulose was converted in levulinic acid by catalyzed hydrothermal liquefaction. The reaction, done at 170 °C and 7 bar, catalyzed by a tailored Brønsted acidic ionic liquid produced levulinic acid and other by-products in smaller quantities. The process had a conversion of cellulose to levulinic acid of 0.25 with municipal sludge and of 0.31 with industrial sludge. These results fully justify the process but, require further study to increase the conversion of cellulose to levulinic acid.

Advances in catalytic routes for the production of carboxylic acids from biomass: a step forward for sustainable polymers

Polymers are ubiquitously present in our daily life because they can meet a wide range of needs and fields of applications. This success, based on an irresponsible linear consumption of plastics and the access to cheap oil, is creating serious environmental problems. Two lines of actions are needed to cope with them: to adopt a circular consumption of plastics and to produce renewable carbon-neutral monomers. This review analyses the recent advances in the chemocatalytic processes for producing biomass-derived carboxylic acids. These renewable carboxylic acids are involved in the synthesis of relevant general purpose and specialty polyesters and polyamides; some of them are currently derived from oil, while others can become surrogates of petrochemical polymers due to their excellent performance properties. Polyesters and polyamides are very suitable to be depolymerised to other valuable chemicals or to their constituent monomers, what facilitates the circular reutilisation of these monomers. Different types of carboxylic acids have been included in this review: monocarboxylic acids (like glycolic, lactic, hydroxypropanoic, methyl vinyl glycolic, methyl-4-methoxy-2-hydroxybutanoic, 2,5-dihydroxypent-3-enoic, 2,5,6-trihydroxyhex-3-enoic acids, diphenolic, acrylic and δ-amino levulinic acids), dicarboxylic acids (2,5-furandicarboxylic, maleic, succinic, adipic and terephthalic acids) and sugar acids (like gluconic and glucaric acids). The review evaluates the technology status and the advantages and drawbacks of each route in terms of feedstock, reaction pathways, catalysts and economic and environmental evaluation. The prospects and the new research that should be undertaken to overcome the main problems threatening their economic viability or the weaknesses that prevent their commercial implementation have also been underlined.

Lipase-catalyzed synthesis and post-polymerization modification of new fully bio-based poly(hexamethylene γ-ketopimelate) and poly(hexamethylene γ-ketopimelate-co-hexamethylene adipate) copolyesters

A novel full bio-based ketone-containing aliphatic polyester was prepared by enzyme-catalyzed polycondensation of diethyl γ-ketopimelate (DEK) with 1,6-hexanediol (HDO) using immobilized lipase B from Candida antarctica (CALB). The influences of polymerization conditions such as temperature, time, enzyme amount, and solvent amount on the molecular weight of poly(hexamethylene γ-ketopimelate) (PHK) were investigated. New fully bio-based poly(hexamethylene γ-ketopimelate-co-hexamethylene adipate) (poly(HK-co-HA)) copolymers with narrow polydispersity and well-defined composition were synthesized by copolymerization of DEK, HDO, and diethyl adipate. The structures of PHK and poly(HK-co-HA) copolymers were characterized by nuclear magnetic resonance, and their thermal characterization was examined by thermogravimetric analysis and differential scanning calorimetry. The degradation of PHK and poly(HK-co-HA) copolymers was studied. The post-polymerization modification of these polyketoesters via oxime click chemistry was further demonstrated.

Recent Progress in Adipic Acid Synthesis Over Heterogeneous Catalysts

Adipic acid is one of the most important feedstocks for producing resins, nylons, lubricants, plasticizers. Current industrial petrochemical process, producing adipic acid from KA oil, catalyzed by nitric acid, has a serious pollution to the environment, due to the formation of waste nitrous oxide. Hence, developing cleaner methods to produce adipic acid has attracted much attention of both industry and academia. This mini-review article discussed advances on adipic acid synthesis from bio-renewable feedstocks, as well as most recent progress on cleaner technology from fossil fuels over novel catalytic materials. This work on recent advances in green adipic acid production will provide insights and guidance to further study of various other industrial processes for producing nylon precursors.

Sustainability metrics of pretreatment processes in a waste derived lignocellulosic biomass biorefinery

Excessive utilization of fossil fuels has resulted in serious concerns about climate change. Integrating biorefinery technology to convert waste-derived-lignocellulosic biomass into biofuels and biopolymers has become an emerging topic toward our sustainable future. Pretreatment to fractionate the building block chemicals from the biomass is a crucial unit operation to ease the downstream processes in biorefinery. However, application of solvents and chemicals in the process can create many operational and environmental challenges in sensitive areas like highly populated cities. To shed light on how to determine a green biorefinery, this study presents the sustainability metrics of various pretreatment techniques and their operational risks during urbanization. The proposed green indexes include fractionation outputs, chemical recyclability, operational profile, and safety factors. In line with the design principles of lignin valorization, the issue of urban biomass and water-and-energy nexus are addressed to support future development and application of urban biorefinery for municipal waste management.

Photocatalytic transformations of lignocellulosic biomass into chemicals

This review highlights recent advances in photocatalytic transformations of lignocellulosic biomass (polysaccharides and lignin) into chemicals (in particular organic oxygenates).

Oxidation of lignocellulosic platform molecules to value-added chemicals using heterogeneous catalytic technologies

This minireview gives an overview about heterogeneous catalytic technologies for the oxidation of key platform molecules (glucose, 5-hydroxymethylfurfural, furfural and levulinic acid) into valuable chemicals.

Zirconia-supported rhenium oxide as an efficient catalyst for the synthesis of biomass-based adipic acid ester

Synthesis of adipic acid, a key monomer of nylon-66 and polyurethane, from biomass is highly attractive for establishing green and sustainable chemical processes. Here, we report that zirconia-supported rhenium oxide (ReO_x/ZrO₂) efficiently catalyses the deoxydehydration of cellulose-derived d-glucaric acid, offering adipic acid ester with a yield of 82% by combining with a Pd/C catalyst in subsequent reactions.

Catalytic Upgrading of Biomass-Derived Sugars with Acidic Nanoporous Materials: Structural Role in Carbon-Chain Length Variation

Shifting from petroleum-based resources to inedible biomass for the production of valuable chemicals and fuels is one of the significant aspects in sustainable chemistry for realizing the sustainable development of our society. Various renowned biobased platform molecules, such as 5-hydroxymethylfurfural, furfural, levulinic acid, and lactic acid, are successfully accessible from the transformation of biobased sugars. To achieve the specific reaction routes, heterogeneous nanoporous acidic materials have served as promising catalysts for the conversion of bio-sugars in the past decade. This Review summarizes advances in various nanoporous acidic materials for bio-sugar conversion, in which the number of carbon atoms is variable and controllable with the assistance of the switchable structure of nanoporous materials. The major focus of this Review is on possible reaction pathways/mechanisms and the relationships between catalyst structure and catalytic performance. Moreover, representative examples of catalytic upgrading of biobased platform molecules to biochemicals and fuels through selective C-C cleavage and coupling strategies over nanoporous acidic materials are also discussed.

Recent Advances in the Development of 5-Hydroxymethylfurfural Oxidation with Base (Nonprecious)-Metal-Containing Catalysts

5-Hydroxymethylfurfural (HMF) is one of the versatile platform molecules that can be derived from biomass, and a promising starting substrate for producing 2,5-diformylfuran (DFF) and 2,5-furandicarboxylic acid (FDCA). DFF is a platform chemical with applications in pharmaceuticals, macrocyclic ligands, and functional polymeric materials. Importantly, FDCA is being considered as a potential alternative to replace terephthalic acid for producing the bioplastic polyethylene furanoate, instead of polyethylene terephthalate, by blending with ethylene glycol. A significant number of studies have focused on the oxidation of HMF to FDCA with metal-containing heterogeneous catalysts in both aqueous and organic media in the presence of peroxides/air/molecular oxygen as the oxidant. In this regard, articles have recently been published related to HMF oxidation with base (nonprecious)-metal-containing catalysts that exhibit appealing activity towards DFF or FDCA in terms of yield. Thus, this Minireview focuses on recent developments in efficient transformations of HMF to DFF and FDCA with base-metal-containing heterogeneous catalysts in aqueous and organic media. This review further focuses on the direct transformation of glucose/fructose to DFF and/or FDCA with nonprecious-metal-containing catalysts in various solvents. Photocatalytic approaches for HMF oxidation with nonprecious metal- containing catalysts are also briefly discussed.

Catalytic transformation of 2,5-furandicarboxylic acid to adipic acid over niobic acid-supported Pt nanoparticles

Biomass-derived 2,5-furandicarboxylic acid was successfully converted to adipic acid over a niobic acid-supported Pt catalyst in water under H₂.

Biotic and Abiotic Synthesis of Renewable Aliphatic Polyesters from Short Building Blocks Obtained from Biotechnology

Biobased polymers have seen their attractiveness increase in recent decades thanks to the significant development of biorefineries to allow access to a wide variety of biobased building blocks. Polyesters are one of the best examples of the development of biobased polymers because most of them now have their monomers produced from renewable resources and are biodegradable. Currently, these polyesters are mainly produced by using traditional chemical catalysts and harsh conditions, but recently greener pathways with nontoxic enzymes as biocatalysts and mild conditions have shown great potential. Bacterial polyesters, such as poly(hydroxyalkanoate)s (PHA), are the best example of the biotic production of high molar mass polymers. PHAs display a wide variety of macromolecular architectures, which allow a large range of applications. The present contribution aims to provide an overview of recent progress in studies on biobased polyesters, especially those made from short building blocks, synthesized through step-growth polymerization. In addition, some important technical aspects of their syntheses through biotic or abiotic pathways have been detailed.

Simple and efficient conversion of cellulose to γ-valerolactone through an integrated alcoholysis/transfer hydrogenation system using Ru and aluminium sulfate catalysts

The conversion of cellulose to GVL was achieved through a one-pot reaction by integrating the alcoholysis and transfer hydrogen processes under microwave condition.