A Chemical Blowing Strategy to Fabricate Biomass-Derived Carbon-Aerogels with Graphene-Like Nanosheet Structures for High-Performance Supercapacitors

Photoinduced charge generation of nanostructured carbon derived from human hair biowaste for performance enhancement in polyvinylidene fluoride based triboelectric nanogenerator

Carbon nanostructures derived from human hair biowaste are incorporated into polyvinylidene fluoride (PVDF) polymer to enhance the energy conversion performance of a triboelectric nanogenerator (TENG). The PVDF filled with activated carbon nanomaterial from human hair (AC-HH) exhibits improved surface charge density and photoinduced charge generation. These remarkable properties are attributed to the presence of graphene-like nanostructures in AC-HH, contributing to the augmented performance of PVDF@AC-HH TENG. The correlation of surface morphologies, surface charge potential, charge capacitance properties, and TENG electrical output of the PVDF composites at various AC-HH loading is studied and discussed. Applications of the PVDF@AC-HH TENG as a power source for micro/nanoelectronics and a movement sensor for detecting finger gestures are also demonstrated. The photoresponse property of the fabricated TENG is demonstrated and analyzed in-depth. The analysis indicates that the photoinduced charge carriers originate from the conductive reduced graphene oxide (rGO), contributing to the enhanced surface charge density of the PVDF composite film. This research introduces a novel approach to enhancing TENG performance through the utilization of carbon nanostructures derived from human biowaste. The findings of this work are crucial for the development of innovative energy-harvesting technology with multifunctionality, including power generation, motion detection, and photoresponse capabilities.

Industrial Waste-Derived Carbon Materials as Advanced Electrodes for Supercapacitors

Strategically upcycling industrial wastes such as petroleum coke and dye wastewater into value-added materials through scalable and economic processes is an effective way to simultaneously tackle energy and environmental issues. Doping carbon electrodes with heteroatoms proves effective in significantly enhancing electrochemical performance through alterations in electrode wettability and electrical conductivity. This work reports the use of dye wastewater as the sole dopant source to synthesize N and S co-doped petroleum coke-based activated carbon (NS-AC) by the one-step pyrolysis method. More importantly, our wastewater and petroleum coke-derived activated carbon produced on a large scale (20 kg/batch) shows a specific surface area of 2582 m2 g-1 and an energy density of about 95 Wh kg-1 in a soft-packaged full cell with 1 M TEATFB/PC as the electrolyte. The scalable production method, together with the green and sustainable process, can be easily adopted and scaled by industry without the need for complex processes and/or units, which offers a convenient and green route to produce functionalized carbons from wastes at a low cost.

Thermal Fabrication of Magnetic Fe3O4 (Nanoparticle)@Carbon Sheets from Waste Resources for the Adsorption of Dyes: Kinetic, Equilibrium, and UV-Visible Spectroscopy Investigations

Thermal treatment is applied for the direct conversion of palm stalk waste to Fe₃O₄ (np)@carbon sheets (Fe₃O₄ (np)@CSs). The effect of conversion temperature was investigated. The TEM examination of the prepared magnetic Fe₃O₄ (np)@CSs showed the formation of Fe₃O₄ (np) in a matrix of carbon sheets as a coated layer with surface functional groups including carbonyl and hydroxyl groups. Removal of dyes such as methyl orange, methylene blue, and neutral red was achieved using fabricated Fe₃O₄ (np)@CSs which were prepared at 250 °C, 400 °C, and 700 °C in a weak acidic medium. By studying the contact time effect for the adsorption of methylene blue, neutral red, and methyl orange, using the fabricated Fe₃O₄ (np)@CSs which were prepared at 250 °C and 400 °C, equilibrium occurred between 120 min and 180 min. In addition, the first-order and second-order kinetic models were applied to the adsorption data. The results revealed that the adsorption data fit better with the second-order kinetic model. Furthermore, the Freundlich model was found to be more suitable for describing the process of the separation of the dyes onto Fe₃O₄ (np)@CSs which were prepared at 250 °C and 400 °C, suggesting heterogenous surfaces and multi-layer adsorption.

High-performance nanostructured bio-based carbon electrodes for energy storage applications

Polyacrylonitrile (PAN)-based carbon precursor is a well-established and researched material for electrodes in energy storage applications due to its good physical properties and excellent electrochemical performance. However, in the fight of preserving the environment and pioneering renewable energy sources, environmentally sustainable carbon precursors with superior electrochemical performance are needed. Therefore, bio-based materials are excellent candidates to replace PAN as a carbon precursor. Depending on the design requirement (e.g. carbon morphology, doping level, specific surface area, pore size and volume, and electrochemical performance), the appropriate selection of carbon precursors can be made from a variety of biomass and biowaste materials. This review provides a summary and discussion on the preparation and characterization of the emerging and recent bio-based carbon precursors that can be used as electrodes in energy storage applications. The review is outlined based on the morphology of nanostructures and the precursor's type. Furthermore, the review discusses and summarizes the excellent electrochemical performance of these recent carbon precursors in storage energy applications. Finally, a summary and outlook are also given. All this together portrays the promising role of bio-based carbon electrodes in energy storage applications.

An Assembly and Interfacial Templating Route to Carbon Supercapacitors with Simultaneously Tailored Meso- and Microstructures

The development of facile strategies for simultaneously tailoring robust pore hierarchy and integrated microstructures in carbonaceous materials is critical for the efficient multiscale control of fluid, molecular/ionic, and charge transport in applications spanning separations, catalysis, and energy storage. Here, we synthesize three-dimensionally ordered hierarchically porous carbon powders by the assembly of glucose with silica nanoparticle building blocks of sacrificial NP-crystalline templates. Such template-replica coassembly offers an attractive alternative to conventional nanocasting by circumventing the need for sequential template preformation and infiltration-based replication. In addition, interfacial templating leads to hierarchically structured carbons with tunable mesopore volumes (as high as 5.8 cm³/g). Beyond mesostructuring, we identify the template-replica interface as a potentially versatile but generally unexploited handle for tailoring the sp² hybridized carbon content in the porous replicas under mild carbonization conditions and without specific chemical activation or catalytic graphitization. This multiscale (meso-micro) templating offered by a single template expands the potential versatility of nanocasting for the hierarchical structuring of replica materials. Application of the resulting carbons as electrochemical double layer capacitors demonstrates the combined benefit of simultaneously tailored pore hierarchy and tuned microstructures upon ion and charge transport, respectively, yielding supercapacitors achieving specific capacitance as high as 275 F/g in the aqueous electrolyte (H₂SO₄) and retention of 90% up to a current density of 10 A/g.