Highly Efficient Oxidation of 5-Hydroxymethylfurfural to 2,5-Furandicarboxylic Acid with Heteropoly Acids and Ionic Liquids

Sustainable depolymerization of lignin into aromatic compounds using amphiphilic Anderson-type polyoxometalate catalysts

Lignin serves as a primary abundant source of renewable aromatic compounds. Achieving efficient breakdown of lignin and retaining its aromatic properties is highly desirable but remains a challenging task. To address this challenge, we synthesized Anderson-type polyoxometalate (POM) catalysts, particularly [CTAC]2[CoMo6]. We then investigated the effectiveness of the POM catalysts in the oxidative depolymerization of larch lignin. Under conditions of 160 °C, 1.0 MPa oxygen atmosphere, and a catalyst-to-substrate ratio of 1:5, we achieved a monomer yield of phenolic compounds at 12.43 wt%. The unsaturated coordination sites of Mo5+ within the catalysts were identified as active sites, facilitating enhanced O2 adsorption and activation. The enhanced O2 adsorption significantly influenced the production of aromatic monomers from lignin. We observed that the catalysts effectively cleaved CC bonds in β-O-4 dimer compounds using lignin dimer model compounds. Notably, the [CTAC]2[CoMo6] catalyst exhibited excellent stability across five cycles, maintaining its high efficiency in lignin depolymerization. This indicates that Anderson-type POM-based catalysts exhibit potential for sustainable conversion of biomass into valuable compounds and for enhancing lignin valorization processes.

Aerobic Oxidation of 5-Hydroxymethylfurfural via Hydrogen Bonds Reconstruction with Ternary Deep Eutectic Solvents

Hydrogen bonding effect exists widely in various chemical and biochemical systems, primarily stabilizing the molecular structure as a positive factor. However, the presence of intermolecular hydrogen bonds among biomass molecules results in a formidable challenge for the efficient utilization of biomass resources. Here in, a novel strategy of "hydrogen bonds reconstruction" was developed by a series of ternary deep eutectic solvent (DESs) as molecular scissors, which disrupting the initial intermolecular hydrogen bonds and reconstructing the new ones to increase the reactivity of the biomass-based compound. The DESs played a crucial role in enhancing the reactivity of 5-hydroxymethylfurfural (HMF) and promoting its oxidation through reconstructing the hydrogen bonds interactions. Furthermore, DESs was also found to activate the Anderson-type catalyst Na5IMo6O24 (IMo6) through an electron-transfer mechanism, which facilitated the generation of oxygen vacancies and significantly enhances its ability to activate molecular oxygen. With this novel catalytic system, oxidation of HMF exhibited remarkable efficiency as HMF was almost entirely converted into FFCA with an impressive yield of 98 % under the optimized conditions. This finding offers novel insights into the utilization of biomass resources and endows the solvent with new functions in the chemical reaction.

Efficient One-Pot Synthesis of 2,5-Furandicarboxylic Acid from Sugars over Polyoxometalate/Metal-Organic Framework Catalysts

Converting extensive sugars into value-added 2,5-furandicarboxylic acid (FDCA) has been considered to be a promising approach to developing sustainable substitutes for chemicals from fossil resources. The complicated conversion processes involved multiple cascade reactions and intermediates, which made the design of efficient multifunction catalysts challenging. Herein, we developed a catalyst by introducing phosphotungstic acid (PW) and Co sites into the UiO-66, which achieved a one-pot cascade conversion of fructose-to-FDCA with high conversion (>99 %) and yield (94.6 %) based on the controllable Lewis/Brønsted acid sites and redox sites. Controlled experiments and detailed characterizations show that the multifunctional PW/UiO(Zr, Co) catalysts successfully affords the direct synthesis of FDCA from fructose via dehydration and selective oxidation in the one-pot reaction. Additionally, the MOF catalysts could also efficiently convert various sugars into FDCA, which has broad application prospects. This study provides new strategies for designing multifunctional catalysts to achieve efficient production of FDCA from biomass in the one-pot reaction.

MIL-47(V)-derived carbon-doped vanadium oxide for selective oxidation of 5-hydroxymethylfurfural to 2,5-diformylfuran

The development and transformation of biomass-derived platform compounds is a sustainable way to deal with the fossil fuel crisis. 5-Hydroxymethylfurfural (HMF) can be reduced or oxidized to produce many high-value compounds; however, it is challenging to effectively produce 2,5-diformylfuran (DFF) due to overoxidation. In this work, a carbon-doped V₂O₅ (C-V₂O₅) material was obtained through pyrolysis of MIL-47(V) nanorods, a typical metal-organic framework material. The X-ray diffraction patterns and X-ray photoelectron spectra showed that the graphitized carbon species were incorporated in C-V₂O₅. High-efficiency HMF oxidation, high specific selectivity for DFF and excellent recycling could be achieved with the C-V₂O₅ catalyst. Fourier-transform infrared spectroscopy combined with density functional theory (DFT) calculation revealed that graphitized carbon weakens the VO bond and promotes the formation of oxygen vacancies in C-V₂O₅, thus improving the catalytic activity in the oxidation of furfuryl alcohols. The V⁴⁺ induced by oxygen vacancies will be oxidized by O₂ to form V⁵⁺, so that the cycle can be realized. It exhibits remarkable selectivity in the oxidation of different alcohols produced from biomass based on the relatively constant active sites in C-V₂O₅.

Base-Free Aerobic Oxidation of Furfuralcohols and Furfurals to Furancarboxylic Acids over Nitrogen-Doped Carbon-Supported AuPd Bowl-Like Catalyst

Upgrading furfuralcohols and furfurals to furancarboxylic acids is of great significance for high value-added downstream chemicals synthesis and biomass conversion. Developing an efficient catalyst is the key to acquiring a completely sustainable process. Herein, nitrogen-doped carbon-supported bimetallic AuPd bowl-like catalysts were synthesized. The surface wettability of nitrogen-doped carbon was well adjusted by the nitrification process. Benefiting from the alloying effect of bimetallic AuPd catalyst and the formation of hydroxyl radical initiated by H₂ O dissociation on the hydrophilic surface of nitrated nitrogen-doped carbon, base-free aerobic oxidation of 5-hydroxymethylfurfural (HMF) could produce the highest 2,5-furandicarboxylic acid (FDCA) yield of 93.9 %. In-situ infrared spectroscopy uncovered adsorption configuration of HMF, and the nitrated carbon surface was favorable for HMF and intermediates to enter the active sites, greatly promoting the catalytic oxidation process. Employing other furfuralcohols (furfuryl alcohol, furan-2,5-diyldimethanol, 2,5-bishydroxymethylfuran) as well as furfural and 5-methylfurfural as starting materials, 35.6-95.4 % yield of furancarboxylic acids (FDCA, 2-furoic acid, 5-methyl-2-furoic acid) were also obtained. Moreover, the developed catalysts could maintain excellent stability and activity after four successive runs. This deep insight into the role of bimetallic synergy and surface wettability provides a basis for the rational design of the highly efficient catalysts for the oxidation of furfuralcohols and furfurals and related reactions.

Current Advances in the Sustainable Conversion of 5-Hydroxymethylfurfural into 2,5-Furandicarboxylic Acid

2,5-Furandicarboxylic acid (FDCA) is currently considered one of the most relevant bio-sourced building blocks, representing a fully sustainable competitor for terephthalic acid as well as the main component in green polymers such as poly(ethylene 2,5-furandicarboxylate) (PEF). The oxidation of biobased 5-hydroxymethylfurfural (HMF) represents the most straightforward approach to obtain FDCA, thus attracting the attention of both academia and industries, as testified by Avantium with the creation of a new plant expected to produce 5000 tons per year. Several approaches allow the oxidation of HMF to FDCA. Metal-mediated homogeneous and heterogeneous catalysis, metal-free catalysis, electrochemical approaches, light-mediated procedures, as well as biocatalytic processes share the target to achieve FDCA in high yield and mild conditions. This Review aims to give an up-to-date overview of the current developments in the main synthetic pathways to obtain FDCA from HMF, with a specific focus on process sustainability.

Advances of Ionic Liquids and Deep Eutectic Solvents in Green Processes of Biomass-Derived 5-Hydroxymethylfurfural

5-Hydroxymethylfurfural (HMF) is identified as an important bio-based platform chemical to bridge petroleum-based and biomass-based resources. It can be obtained through dehydration of various carbohydrates as well as converted to value-added fuels and chemicals. As designer solvents, ionic liquids (ILs) and deep eutectic solvents (DESs) have been widely used in catalytic transformation of biomass derivatives to various chemicals. This Review summarizes recent progress in experimental and theoretical studies on dehydration of carbohydrates such as fructose, glucose, sucrose, cellobiose, chitosan, cellulose, inulin, and even raw biomass to generate HMF using ILs and DESs as catalysts/cocatalysts and/or solvents/cosolvents. It also gives an overview of IL and DES-involved catalytic transformation of HMF to downstream products via oxidation, reduction, esterification, decarboxylation, and so forth. Challenges and prospects of ILs and DESs are also proposed for further production of HMF and HMF derivatives from biomass in green and sustainable processes.

Highly Efficient Electrocatalytic Upgrade of n-Valeraldehyde to Octane over Au SACs-NiMn2 O4 Spinel Synergetic Composites

In this work, electrocatalytic upgrade of n-valeraldehyde to octane with higher activity and selectivity is achieved over Au single-atom catalysts (SACs)-NiMn₂ O₄ spinel synergetic composites. Experiments combined with density functional theory calculation collaboratively demonstrate that Au single-atoms occupy surface Ni²⁺ vacancies of NiMn₂ O₄ , which play a dominant role in n-valeraldehyde selective oxidation. A detailed investigation reveals that the initial n-valeraldehyde molecule preferentially adsorbs on the Mn tetrahedral site of NiMn₂ O₄ spinel synergetic structures, and the subsequent n-valeraldehyde molecule easily adsorbs on the Ni site. Specifically, Au single-atom surficial derivation over spinel lowers the adsorption energy (E_ads ) of the initial n-valeraldehyde molecule, which will facilitate its adsorption on the Mn site of Au SACs-NiMn₂ O₄ . Furthermore, the single-atom Au surficial derivation not only alters the electronic structure of Au SACs-NiMn₂ O₄ but also lower the E_ads of subsequent n-valeraldehyde molecule. Hence, the subsequent n-valeraldehyde molecules prefer adsorption on Au sites rather than Ni sites, and the process of two alkyl radicals originating from Mn-C₄ H₉ and Au-C₄ H₉ dimerization into an octane is accordingly accelerated. This work will provide an avenue for the rational design of SACs and supply a vital mechanism for understanding the electrocatalytic upgrade of n-valeraldehyde to octane.

Efficient Etherification of 2,5-Bis(hydroxymethyl)furan to 2,5-Bis(propoxymethyl)furan by an Amorphous Silica-Alumina Catalyst in a Fixed-Bed Reactor

The efficient etherification of 2,5-bis(hydroxymethyl)furan (BHMF) to 2,5-bis(propoxymethyl)furan (BPMF) was achieved by using low-cost amorphous silica-aluminas (ASA) catalysts in a fixed-bed reactor. A considerable yield of BPMF up to 85.1 % was obtained over ASA-30 catalyst under the reaction conditions of 140 °C, 2.0 MPa of N2 , and 0.015 h-1 of WHSV. The excellent performance of ASA-30 catalyst could be attributed to the relatively stronger acidity (>375 °C) and larger mesoporous size (6 nm), thereby facilitating the conversion of BHMF to BPMF. In addition, the lower ratio of Brønsted/Lewis acid sites for ASA catalyst was found to efficiently suppress the occurrence of side reactions.

Sustainable Routes for the Synthesis of Renewable Adipic Acid from Biomass Derivatives

Adipic acid (AA) is a key industrial dicarboxylic acid intermediate used in nylon manufacturing. Unfortunately, the traditional process technology is accompanied by serious environmental pollution. Given the growing demand for adipic acid and the desire to reduce its negative impact on the environment, considerable efforts have been devoted to developing more green and friendly routes. This Review is focused on the latest advances in the sustainable preparation of AA from biomass-based platform molecules, including 5-hydroxymethylfufural, glucose, γ-valerolactone, and phenolic compounds, through biocatalysis, chemocatalysis, and the combination of both. Additionally, the development of state-of-the-art catalysts for different catalytic systems systematically is discussed and summarized, as well as their reaction mechanisms. Finally, the prospects for all preparation routes are critically evaluated and key technical challenges in the development of green and sustainable processes for the manufacture of AA are highlighted. It is hoped that the green adipic acid synthesis pathways presented can provide insights and guidance for further research into other industrial processes for the production of nylon precursors in the future.

Deep eutectic solvents coupled with (NH4)3H6CoMo6O24 trigger aerobic oxidation of 5-hydroxymethylfurfural to 5-formyl-2-furancarboxylic acid

An Anderson-type polyoxometalate (NH4)3H6CoMo6O24 in deep eutectic solvents exhibited outstanding catalytic performance for the selective aerobic oxidation of HMF to FFCA. It is potentially a promising and highly environmentally friendly...

Metal-free approach towards efficient synthesis of FDCA using a p-toluene sulfonic acid (p-TSA)-derived heterogeneous solid acid catalyst and oxone over two steps from HMF, fructose and glucose

In this work, a metal-free approach towards synthesis of 2,5-furandicarboxylic acid (FDCA) from HMF, fructose and glucose is reported over two steps using p-TSA–POM solid acid catalyst in the first step and oxone as an oxidant in the second step.

Conversion of inulin-rich raw plant biomass to 2,5-furandicarboxylic acid (FDCA): Progress and challenge towards biorenewable plastics

The current commercial plastic manufactures have been produced using petroleum-based resource. However, due to concerns over the resource depletion and the environmental sustainability, bioresource-based manufacturing processes have been developed to cope against these concerns. Bioresource-derived 2,5-furandicarboxylic acid (FDCA) can be utilized as a building block material for plastic manufactures. To date, numerous technologies have been developed for the production of FDCA using various types of bio-based feedstocks such as hydroxymethylfurfural (HMF), 6-C sugars, and polysaccharides. The commercial companies produce FDCA using HMF-based production processes due to their high production efficiency, but the high price of HMF is a problem bottleneck. Our review affords important information on breakthrough approaches for the cost-efficient and sustainable production of FDCA using raw plant feedstocks rich in inulin. These approaches include bioprocessing technology based on the direct use of raw plant feedstocks and biomodification of the target plant sources. For the former, an ionic liquid-based processing system is proposed for efficient pretreatment of raw plant feedstocks. For the latter, the genes encoding the key enzymes; sucrose:sucrose 1-fructoyltransferase (1-SST), fructan:fructan 1-fryuctosyltransferase (1-FFT), fructan 1-exohydrolase (1-FEH), and microbe-derived endoinulinase, are introduced for biomodification conducive to facilitating bioprocess and improving inulin content. These approaches would contribute to cost-efficiently and sustainably producing bio-based FDCA.

Recent Advances in Catalytic Conversion of Biomass to 2,5-Furandicarboxylic Acid

Converting biomass into high value-added compounds has attracted great attention for solving fossil fuel consumption and global warming. 5-Hydroxymethylfurfural (HMF) has been considered as a versatile biomass-derived building block that can be used to synthesize a variety of sustainable fuels and chemicals. Among these derivatives, 2,5-furandicarboxylic acid (FDCA) is a desirable alternative to petroleum-derived terephthalic acid for the synthesis of biodegradable polyesters. Herein, to fully understand the current development of the catalytic conversion of biomass to FDCA, a comprehensive review of the catalytic conversion of cellulose biomass to HMF and the oxidation of HMF to FDCA is presented. Moreover, future research directions and general trends of using biomass for FDCA production are also proposed.

Accelerating Selective Oxidation of Biomass-Based Hydroxyl Compounds with Hydrogen Bond Acceptors

Hydrogen-bonding-initiated self-association makes the valorization of biomass-based hydroxyl compounds a formidable challenge at high concentration. Apart from enhancing the dehydration reaction of hydroxyl compounds with the noncovalent medium effects, insights into how these effects can be exploited to optimize the oxidative reactivity of concentrated hydroxyl compounds remain unclear. Herein, we elucidate that deaggregation of hydroxyl groups with a catalytic number of hydrogen bond acceptors is essential in improving the reactivity of the aerobic oxidation of biomass-based neat aromatic alcohols over the vanadium-based catalyst. The neat 5-hydroxymethylfurfural (HMF) deaggregated with 25 mol % N,N-dimethylformamide (DMF) shows a >7-fold increase in reactivity to produce corresponding aldehydes with excellent selectivity, in stark contrast to the contrary deactivation of reaction in excessive DMF.

Hydroxyapatite-Supported Polyoxometalates for the Highly Selective Aerobic Oxidation of 5-Hydroxymethylfurfural or Glucose to 2,5-Diformylfuran under Atmospheric Pressure

(NH4 )5 H6 PV8 Mo4 O40 supported on hydroxyapatite (HAP) (PMo4 V8 /HAP (n)) was prepared through the ion exchange of hydroxy groups. This ion exchange favored the oxidative conversion of 5-hydroxymethylfurfural (5-HMF) to 2,5-diformylfuran (DFF) in a one-pot cascade reaction with 96.0 % conversion and 83.8 % yield under 10 mL/min of O2 flow. PMo4 V8 /HAP (31) was used to explore the production of DFF directly from glucose with the highest yield of 47.9 % so far under atmospheric oxygen, whereas the yield of DFF increased to 54.7 % in a one-pot and two-step reaction. These results indicated that the active sites in PMo4 V8 /HAP (31) retained their activities without any interference toward one another, which enabled the production of DFF in a more cost-saving way by only using oxygen and one catalyst in a one-step reaction. Meanwhile, the rigid structure of HAP and strong interaction in PMo4 V8 /HAP (31) allowed this catalyst to be reused for at least six times with high stability and duration.

Imidazole-Functionalized Polyoxometalate Catalysts for the Oxidation of 5-Hydroxymethylfurfural to 2,5-Diformylfuran Using Atmospheric O2

Biomass as a sustainable and abundant carbon source has attracted considerable attention as a potential alternative to petroleum resources. The selective oxidation of 5-hydroxymethylfurfural (HMF), a versatile platform molecule, to value-added 2,5-diformylfuran (DFF) provides an efficient pathway for biomass valorization. Herein, three discrete imidazole-functionalized polyoxometalates (POMs), HPMo₈V^VI₄O₄₀(V^VO)₂[(V^IVO)(IM)₄]₂·nH₂O·(IM)_m (IM = 1-methylimidazole, n = 4, m = 8 for 1; IM = 1-ethylimidazole, n = 4, m = 9 for 2; IM = 1-propylimidazole, n = 0, m = 4 for 3), have been successfully synthesized by a facile solvothermal method and thoroughly characterized by routine techniques. Compounds 1-3 contain a bi-capped pseudo-Keggin {HPMo₈V₄O₄₀(VO)₂} and two imidazole-functionalized {(VO)(IM)₄} groups, which, to our knowledge, represent the first examples of organic-functionalized Mo-V clusters. Compounds 1-3 as heterogeneous catalysts can effectively promote the transformation of HMF to DFF using atmospheric O₂ as oxidant. Under minimally optimized conditions, 95% of HMF was converted by 1 with 95% selectivity for DFF and its catalytic activity was basically maintained after five cycles. Moreover, the important roles of the bi-capped pseudo-Keggin cluster and the functionalized V groups in the selective oxidation of HMF have been explored. According to experimental and spectroscopic results, a three-step oxidation mechanism of HMF to DFF has been proposed.

Seagrass-based platform strategies for sustainable hydroxymethylfurfural (HMF) production: toward bio-based chemical products

Today, sustainable chemistry is a key trend in the chemical manufacturing industry due mainly to concerns over the global environment and resource security. In sustainable chemical manufacture, the choice of a bio-based feedstock plays a pivotal pillar. In terms of feedstock utilization for producing HMF, which is a multivalent platform intermediate easily convertible to valuable chemical products; biopolymers, biofuels, and other important chemicals, seagrass biomasses can be more favorable feedstocks compared with land plant resources due primarily to easy availability and no systematic farming. Moreover, seagrass feedstocks could contribute cost-effectively and sustainably producing HMF by exploiting the beach-cast seagrasses on seagrass-prairies with no feedstock cost, indicating that seagrass biomasses could be a most promising biofeedstock source for sustainable HMF production. We afford a platform bioprocessing technology that has not been attempted before for sustainable HMF production using raw seagrass biomass. This bioprocess can be operated by simple reaction conditions using inorganic Brønsted acids (mainly HCl) and ionic liquid solvents at relatively low temperatures (120-130 °C). In addition, some bioengineering strategies for improving the growth of seagrass biomass and the quantity/quality of nonstructural carbohydrates (starch, sucrose) that can be used as the feeding substrates for HMF production are also discussed. The main aim of this review is to provide some important information about breakthrough bio/technologies conducive to cost-effective and sustainable HMF production.

Tungsten-substituted molybdophosphoric acid impregnated with kaolin: effective catalysts for the synthesis of 3,4-dihydropyrimidin-2(1H)-ones via biginelli reaction

A series of highly reusable heterogeneous catalysts (10-25 wt% PMo7W5/kaolin), consisting of tungsten-substituted molybdophosphoric acid, H3PMo7W5O40·24H2O (PMo7W5) impregnated with acid treated kaolin clay was synthesized by the wetness impregnation method. The newly synthesized catalyst was fully characterized using inductively coupled plasma-atomic emission spectroscopy (ICP-AES), Fourier transform infrared (FT-IR), powder X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray analysis (EDX), transmission electron microscopy (TEM), Brunauer-Emmett-Teller (BET) analysis and thermal analysis (TG-DTA). The synthesized materials were shown to be efficient in the synthesis of 3,4-dihydropyrimidin-2(1H)-ones via Biginelli reaction under solvent-free conditions. The obtained results indicate that 20% PMo7W5/kaolin catalyst showed remarkably enhanced catalytic activity compared to the bulk PMo7W5 catalyst, and also the (10 and 15%) PMo7W5 catalyst supported on kaolin clay.

Weak Bonds Joint Effects Catalyze the Cleavage of Strong C-C Bond of Lignin-Inspired Compounds and Lignin in Air by Ionic Liquids

Oxidation of lignin to value-added aromatics through selective C-C bond cleavage via metal-free and mild strategies is promising but challenging. It was discovered that the cations of ionic liquids (ILs) could effectively catalyze this kind of strong bond cleavage by forming multiple weak hydrogen bonds, enabling the reaction conducted in air at temperature lower than 373 K without metal-containing catalysts. The cation [CPMim]⁺ (1-propylronitrile-3-methylimidazolium) afforded the highest efficiency in C-C bond cleavage, in which high yields (>90 %) of oxidative products were achieved. [CPMim]⁺ could form three ipsilateral hydrogen bonds with the oxygen atom of C=O and ether bonds at both sides of the C-C bond. The weak bonds joint effects could promote adjacent C-H bond cleave to form free radicals and thereby catalyze the fragmentation of the strong C-C. This work opens up an eco-friendly and energy-efficient route for direct valorization of lignin by enhancing IL properties via tuning the cation.

A microwave assisted ionic liquid route to prepare bivalent Mn5O8 nanoplates for 5-hydroxymethylfurfural oxidation

In order to develop highly active non-precious metal catalysts for the selective oxidation of the platform compound 5-hydroxymethylfurfural (HMF) to the value-added bio-chemical 2,5-diformylfuran (DFF), we prepared high purity bivalent Mn₅O₈ nanoplates by a microwave-assisted ionic liquid route. The precursor of bivalent Mn₅O₈ nanoplates was formed through π-π stacking between imidazolium rings of the ionic liquid 1-butyl-3-methyl-imidazolium chloride and extending hydrogen bonds between Cl anions and hydrohausmannite. An oriented aggregation growth occurred on the basis of the Ostwald ripening under microwave heating. The high purity bivalent Mn₅O₈ nanoplates obtained through calcination at 550 °C for 2 h exhibited high HMF conversion (51%) and DFF selectivity (94%) at 5 bar of oxygen pressure in 2 h. The high concentration of Mn⁴⁺ on the exterior surfaces of Mn₅O₈ nanoplates as active sites coupled with good crystallinity played key roles for desirable mass and heat transfer, and for fast desorption avoiding over-oxidation. The reaction process over the Mn₅O₈ nanoplates was proposed based on the understanding of Mn⁴⁺ active centers and lattice oxygen via a Mn⁴⁺/Mn²⁺ two-electron cycle to enhance their catalytic performance. Furthermore, the Mn₅O₈ nanoplates could be readily recovered and reused without loss of catalytic activity. Thus, the high purity Mn₅O₈ nanoplates with good catalytic performance raises the prospect of using the type of sole metal oxide for practical applications.

Advances in catalytic routes for the production of carboxylic acids from biomass: a step forward for sustainable polymers

Polymers are ubiquitously present in our daily life because they can meet a wide range of needs and fields of applications. This success, based on an irresponsible linear consumption of plastics and the access to cheap oil, is creating serious environmental problems. Two lines of actions are needed to cope with them: to adopt a circular consumption of plastics and to produce renewable carbon-neutral monomers. This review analyses the recent advances in the chemocatalytic processes for producing biomass-derived carboxylic acids. These renewable carboxylic acids are involved in the synthesis of relevant general purpose and specialty polyesters and polyamides; some of them are currently derived from oil, while others can become surrogates of petrochemical polymers due to their excellent performance properties. Polyesters and polyamides are very suitable to be depolymerised to other valuable chemicals or to their constituent monomers, what facilitates the circular reutilisation of these monomers. Different types of carboxylic acids have been included in this review: monocarboxylic acids (like glycolic, lactic, hydroxypropanoic, methyl vinyl glycolic, methyl-4-methoxy-2-hydroxybutanoic, 2,5-dihydroxypent-3-enoic, 2,5,6-trihydroxyhex-3-enoic acids, diphenolic, acrylic and δ-amino levulinic acids), dicarboxylic acids (2,5-furandicarboxylic, maleic, succinic, adipic and terephthalic acids) and sugar acids (like gluconic and glucaric acids). The review evaluates the technology status and the advantages and drawbacks of each route in terms of feedstock, reaction pathways, catalysts and economic and environmental evaluation. The prospects and the new research that should be undertaken to overcome the main problems threatening their economic viability or the weaknesses that prevent their commercial implementation have also been underlined.