Tailoring the Porosity in Iron Phosphosulfide Nanosheets to Improve the Performance of Photocatalytic Hydrogen Evolution

Enhanced piezo-photocatalytic performance in ZnIn2S4/BiFeO3 heterojunction stimulated by solar and mechanical energy for efficient hydrogen evolution

An emerging approach that employs both light and vibration energy on binary photo-/piezoelectric semiconductor materials for efficient hydrogen (H2) evolution has garnered considerable attention. ZnIn2S4 (ZIS) is recognized as a promising visible-light-activated photocatalyst. However, its effectiveness is constraint by the slow separation dynamics of photoexcited carriers. Density functional theory (DFT) predictions have shown that the integration of piezoelectric BiFeO3 (BFO) is conducive to the reduction of the H2 adsorption free energy (ΔGH*) for the photocatalytic H2 evolution reaction, thereby enhancing the reaction kinetics. Informed by theoretical predictions, piezoelectric BFO polyhedron particles were successfully synthesized and incorporated with ZIS nanoflowers to create a ZIS/BFO heterojunction using an ultrasonic-assisted calcination method. When subjected to simultaneous ultrasonic treatment and visible-light irradiation, the optimal ZIS/BFO piezoelectric enhanced (piezo-enhanced) heterojunction exhibited a piezoelectric photocatalytic (piezo-photocatalytic) H2 evolution rate approximately 6.6 times higher than that of pristine ZIS and about 3.0 times greater than the rate achieved under light-only conditions. Moreover, based on theoretical predictions and experimental results, a plausible mechanism and charge transfer route for the enhancement of piezo-photocatalytic performance were studied by the subsequent piezoelectric force microscopy (PFM) measurements and DFT calculations. The findings of this study strongly confirm that both the internal electric field of the step-scheme (S-Scheme) heterojunction and the alternating piezoelectric field generated by the vibration of BFO can enhance the transportation and separation of electron-hole pairs. This study presents a concept for the multipath utilization of light and vibrational energy to harness renewable energy from the environment.

Extraction of Uranium by a Pyrazole-Based Porous Organic Polymer

In this work, we report a pyrazole-based porous organic polymer (namely, ECUT-POP-2) for extraction of uranium. ECUT-POP-2 affords a high uranium extraction capacity of up to 1851 mg/g, excellent selectivity, and good reusability, suggesting its superior application in treating uranium-containing wastewater and acquring nuclear fuel.

Stability and Crystallinity of Sodium Poly(Heptazine Imide) in Photocatalysis

Poly(heptazine imide) (PHI) salts, as crystalline carbon nitrides, exhibit high photocatalytic activity and are being extensively researched, but its photochemical instability has not drawn researchers' attention yet. Herein, sodium PHI (PHI-Na) ultrathin nanosheets with increased crystallinity, synthesized by enhancing contact of melamine with NaCl functioning as a structure-induction agent and hard template, exhibits improved photocatalytic hydrogen evolution activity, but low photochemical stability, owing to Na+ loss in the photocatalytic process, which, interestingly, can be enhanced by the common ion effect, e.g., addition of NaCl that is also able to remarkably increase the photoactivity with the apparent quantum yield at 420 nm reaching 41.5 %. This work aims at attracting research peers' attention to photochemical instability of PHI salts and provides a way to enhance their crystallinity.

Atomic-level investigation on significance of photoreduced Pt nanoparticles over g-C3 N4 /bimetallic oxide composites

Designing an effective photocatalyst for solar-to-chemical fuel conversion presents significant challenges. Herein, g-C3 N4 nanotubes/CuCo2 O4 (CN-NT-CCO) composites decorated with platinum nanoparticles (Pt NPs) were successfully synthesized by chemical and photochemical reductions. The size distribution and location of Pt NPs on the surface of CN-NT-CCO composites were directly observed by TEM. Extended X-ray absorption fine structure (EXAFS) spectra of Pt L3-edge for the above composite confirmed establishment of Pt-N bonds at an atomic distance of 2.09 Å in the photoreduced Pt-bearing composite, which was shorter than in chemically reduced Pt-bearing composites. This proved the stronger interaction of photoreduced Pt NPs with the CN-NT-CCO composite than chemical reduced one. The H2 evolution performance of the photoreduced (PR) Pt@CN-NT-CCO (2079 μmol h-1  g-1 ) was greater than that of the chemically reduced (CR) Pt@CN-NT-CCO composite (1481 μmol h-1  g-1 ). The abundance of catalytically active sites and transfer of electrons from CN-NT to the Pt NPs to participate in the hydrogen evolution are the primary reasons for the improved performance. Furthermore, electrochemical investigations and band edge locations validated the presence of a Z-scheme heterojunction at the Pt@CN-NT-CCO interface. This work offers unique perspectives on the structure and interface design at the atomic level to fabricate high-performance heterojunction photocatalysts.

Facile construction of a sulfur vacancy defect-decorated CoSx@In2S3 core/shell heterojunction for efficient visible-light-driven photocatalytic hydrogen evolution

Photoinduced electron-separation and -transport processes are two independent crucial factors for determining the efficiency of photocatalytic hydrogen production. Herein, a sulfur vacancy defect-decorated CoSx@In2S3 (CoSx@VS-In2S3) core/shell heterojunction photocatalyst was synthesized via an in situ sulfidation method followed by a liquid-phase corrosion process. Photocatalytic hydrogen evolution experiments showed that the CoSx@VS-In2S3 nanohybrids delivered an attractive photocatalytic activity of 4.136 mmol h-1 g-1 under visible-light irradiation, which was 8.23 times higher than that of the pristine In2S3 samples. As expected, VS could enhance the charge-separation efficiency of In2S3 through rearranging the electrons of the In2S3 basal plane, in addition to improving the electron-transfer efficiency, as visually verified by transient absorption spectroscopy. Mechanism studies based on density functional theory calculations confirmed that the In atoms adjacent to VS played a key role in the translation, rotation, and transformation of electrons for water reduction. This scalable strategy focused on defect engineering paves a new avenue for the design and assembly of 2D core/shell heterostructures for efficient and robust water-splitting photocatalysts.

Single-Atom Phosphorus Defects Decorated CoP Cocatalyst Boosts Photocatalytic Hydrogen Generation Performance of Cd0.5 Zn0.5 S by Directed Separating the Photogenerated Carriers

Design and preparation of an efficient and nonprecious cocatalysts, with structural features and functionality necessary for improving photocatalytic performance of semiconductors, remain a formidable challenge until now. Herein, for the first time, a novel CoP cocatalyst with single-atom phosphorus vacancies defects (CoP-V_p ) is synthesized and coupled with Cd_0.5 Zn_0.5 S to build CoP-V_p @Cd_0.5 Zn_0.5 S (CoP-V_p @CZS) heterojunctions photocatalysts via a liquid phase corrosion method following by an in suit growth process. The nanohybrids deliver an attractive photocatalytic hydrogen production activity of 2.05 mmol h^-1 30 mg^-1 under visible-light irradiation, which is 14.66 times higher than that of the pristine ZCS samples. As expected, CoP-V_p further enhances the charge-separation efficiency of ZCS, in addition to the improvement of the electron transfer efficiency, which is confirmed by the ultrafast spectroscopies. Mechanism studies based on density functional theory calculations verify that Co atoms adjacent with single-atom V_p play the key role in translation, rotation, and transformation of electrons for H₂ O reduction. This scalable strategy focusing defect engineering provides a new insight into designing the highly active cocatalysts to boost the photocatalytic application.

NiPS3 ultrathin nanosheets as versatile platform advancing highly active photocatalytic H2 production

High-performance and low-cost photocatalysts play the key role in achieving the large-scale solar hydrogen production. In this work, we report a liquid-exfoliation approach to prepare NiPS₃ ultrathin nanosheets as a versatile platform to greatly improve the light-induced hydrogen production on various photocatalysts, including TiO₂, CdS, In₂ZnS₄ and C₃N₄. The superb visible-light-induced hydrogen production rate (13,600 μmol h^-1 g^-1) is achieved on NiPS₃/CdS hetero-junction with the highest improvement factor (~1,667%) compared with that of pure CdS. This significantly better performance is attributed to the strongly correlated NiPS₃/CdS interface assuring efficient electron-hole dissociation/transport, as well as abundant atomic-level edge P/S sites and activated basal S sites on NiPS₃ ultrathin nanosheets advancing hydrogen evolution. These findings are revealed by the state-of-art characterizations and theoretical computations. Our work for the first time demonstrates the great potential of metal phosphorous chalcogenide as a general platform to tremendously raise the performance of different photocatalysts.

Computational analysis of the enhancement of photoelectrolysis using transition metal dichalcogenide heterostructures

Finding a material with all the desired properties for a photocatalytic water splitter is a challenge yet to be overcome, requiring both a surface with ideal energetics for all steps in the hydrogen and oxygen evolution reactions (HER and OER) and a bulk band gap large enough to mediate said steps. We have instead examined separating these challenges by investigating the energetic properties of two-dimensional transition metal dichalcogenides (TMDCs) that could be used as a surface coating to a material with a large enough bulk band gap. First we investigated the energetics of monolayer MoS₂and PdSe₂using density functional theory and then investigated how these energetics changed when they were combined into a heterostructure. Our results show that the surface properties were practically (<0.2 eV) unchanged when combined and the MoS₂layer aligns well with the OER and HER. This work highlights the potential of TMDC monolayers as surface coatings for bulk materials that have sufficient band gaps for photocatalytic applications.

Phase Transitions and Water Splitting Applications of 2D Transition Metal Dichalcogenides and Metal Phosphorous Trichalcogenides

2D layered materials turn out to be the most attractive hotspot in materials for their unique physical and chemical properties. A special class of 2D layered material refers to materials exhibiting phase transition based on environment variables. Among these materials, transition metal dichalcogenides (TMDs) act as a promising alternative for their unique combination of atomic-scale thickness, direct bandgap, significant spin-orbit coupling and prominent electronic and mechanical properties, enabling them to be applied for fundamental studies as catalyst materials. Metal phosphorous trichalcogenides (MPTs), as another potential catalytic 2D phase transition material, have been employed for their unusual intercalation behavior and electrochemical properties, which act as a secondary electrode in lithium batteries. The preparation of 2D TMD and MPT materials has been extensively conducted by engineering their intrinsic structures at the atomic scale. In this study, advanced synthesis methods of preparing 2D TMD and MPT materials are tested, and their properties are investigated, with stress placed on their phase transition. The surge of this type of report is associated with water-splitting catalysis and other catalytic purposes. This study aims to be a guideline to explore the mentioned 2D TMD and MPT materials for their catalytic applications.

Characteristics of hydrogen production by photocatalytic water splitting using liquid phase plasma over Ag-doped TiO2 photocatalysts

Hydrogen production from water was investigated by applying liquid plasma (LPP) to photocatalytic splitting of water. The optical properties of LPP due to water emission were also evaluated. The correlation between the optical properties of plasma and the formation of active species in water was investigated with the photocatalytic activity of hydrogen production. TiO₂ was also doped with Ag to evaluate the effect of enhancing photocatalytic activity. The photocatalytic activity was evaluated by the rate of hydrogen production, and the effect of hydrogen formation was also investigated by injecting methanol as an additive. As a result of examining the luminescence properties of LPP, it showed high luminescence in the 309 nm UV region and the 656 nm visible region. The hydrogen doping rate was increased in the Ag-doped TiO₂ photocatalyst. Ag-doped TiO₂ has wider light absorption into the visible region and narrower band gap. Due to these properties, the rate of hydrogen generation is superior to TiO₂ photocatalysts. The photochemical reaction with LPP and photocatalyst in aqueous solution with CH₃OH showed a significant increase in hydrogen production rate. The increase in hydrogen production by injection of additives is because the optical properties of generating OH radicals are improved and CH₃OH is decomposed to act as an electron donor to improve hydrogen production.

Cobalt doping of FePS3 promotes intrinsic active sites for the efficient hydrogen evolution reaction

Exploring Earth-abundant electrocatalysts to achieve the efficient hydrogen evolution reaction (HER) is important for the development of clean and renewable hydrogen energy. Herein, we focus on a representative transition metal phosphosulfide electrocatalyst FePS3. Enlightened by our theoretical calculations that Co dopants improve H affinity on P sites and electrical conductivity, we prepared a series of Fe1-xCoxPS3 (x = 0, 0.05, 0.1, 0.15, 0.2, 0.25) compounds and characterized them by XRD, ICP, XPS, Raman, SEM, TEM, EDS, and resistivity and electrochemical measurement. It is found that the overpotential can be reduced by 166 mV, and the Tafel slope drops from 170 mV dec-1 to 80 mV dec-1. This work provides new insights to optimize the electrocatalytic hydrogen evolution activity of related transition metal phosphosulfides.

Smart Assembly of Sulfide Heterojunction Photocatalysts with Well-Defined Interfaces for Direct Z-Scheme Water Splitting under Visible Light

A Z-scheme photocatalytic water-splitting system is an effective approach to integrate the advantages both hydrogen- and oxygen-evolution photocatalysts. The interfacial properties of the heterojunctions have a great influence on the efficiency through the crystal orientation and the charge kinetics. In this study, a general chemical vapor deposition process and a gentle cation-exchange method were combined to assemble Z-scheme photocatalysts between CdS and MnS. As a result of the well-defined heterojunction interfaces and distinctive structural benefits, without cocatalysts, the 1 D CdS/MnS hybrid photocatalyst exhibited a significantly increased photocatalytic H₂ evolution rate of 1595 μmol h^-1  g^-1 (apparent quantum efficiency of 22.6 % at λ=420 nm), which is over 10.5 times higher than that of CdS. Moreover, a better photocatalytic stability is demonstrated over particulate (42 h cycling measurement) and photoelectrochemical (3000 min continuous measurement) systems. Overall, this work provides a unique experimental insight into high-quality heterojunction interface design and new Z-scheme photocatalyst synthesis.

In situ synthesis of Co2P-decorated red phosphorus nanosheets for efficient photocatalytic H2 evolution

The Co₂P as co-catalyst was firstly loaded on the 2D microporous structure RP surface by in situ hydrothermal method.

Amorphous tungsten phosphosulphide-modified CdS nanorods as a highly efficient electron-cocatalyst for enhanced photocatalytic hydrogen production

Improving the utilization rate of photogenerated electrons generated by visible light excitation is an important factor to improve the activity of photocatalytic decomposition of water for hydrogen evolution.