Selective Cellulose Hydrogenolysis to Ethanol Using Ni@C Combined with Phosphoric Acid Catalysts

Graphene-like wrapped Ni@C catalyst with magnetic recyclability for selective hydrogenation of nitro-aromatics

The graphene-like wrapped Ni@C catalysts were facilely synthesized by a modified sol-gel method. Nickel nitrate and citric acid (CA) were adopted as the raw materials to form sol-gel mixture. Under the circumstances, the additive CA were employed not only as a complexing agent but also as a carbon source. It is found that the calcination temperature and the mole ratios between Ni and CA are the key factors affecting the physical property and the catalytic performance of catalysts in the conversion of nitroarenes into corresponding anilines. The results show that the Ni@C-500(1:1) catalyst exhibited the best performance in the hydrogenation ofo-chloronitrobenzenes (o-CNB) too-chloroanilines (o-CAN). The yield ofo-CAN was achieved at 100% wheno-CNB was completely converted at 40.0 °C under 2.0 MPa H₂for 2.0 h. Furthermore, the Ni@C-500(1:1) catalyst could be separated and recovered easily after reaction by an external magnetic field. The investigated results indicate that the Ni@C-500(1:1) catalyst remained higher activity after using twelve times. More importantly, this kind of catalyst is also active for the selective hydrogenation of other nitroarenes into the corresponding anilines. This new synthetic method may pave a way for producing low-cost Ni@C catalysts on a large scale, which is attractive for industrial anilines applications.

Chemocatalytic Conversion of Lignocellulosic Biomass to Ethanol: A Mini-Review

Ethanol has been widely used as a clean fuel, solvent, and hydrogen carrier. Currently, ethanol is generally produced through fermentation of starch- and sugarcane-derived sugars (e.g., glucose and sucrose) or ethylene hydration. Its production from abundant and inexpensive lignocellulosic biomass would facilitate the development of green and sustainable society. Biomass-derived carbohydrates and syngas can serve as important feedstocks for ethanol synthesis via biological and chemical pathways. Nevertheless, the biological pathway for producing ethanol through biomass-derived glucose fermentation has the disadvantages of long production period and carbon loss. These issues can be effectively mitigated by chemocatalytic methods, which can readily convert biomass to ethanol in high yields and high atomic efficiency. In this article, we review the recent advances in chemocatalytic conversion of lignocellulosic biomass to ethanol, with a focus on analyzing the mechanism of chemocatalytic pathways and discussing the issues related to these methods. We hope this mini-review can provide new insights into the development of direct ethanol synthesis from renewable lignocellulosic biomass.

Advanced Carbon-Based Nanocatalysts and their Application in Catalytic Conversion of Renewable Platform Molecules

The transformation of renewable platform molecules to produce value-added fuels and fine-chemicals is a promising strategy to sustainably meet future demands. Owing to their finely modified electronic and geometric properties, carbon-based nanocatalysts have shown great capability to regulate their catalytic activity and stability. Their well-defined and uniform structures also provide both the opportunity to explore intrinsic reaction mechanisms and the site-requirement for valorization of renewable platform molecules to advanced fuels and chemicals. This Review highlights the progress achieved in carbon-based nanocatalysts, mainly by using effective regulation approaches such as heteroatom anchoring, bimetallic synergistic effects, and carbon encapsulation to enhance catalyst performance and stability, and their applications in renewable platform molecule transformations. The foundation for understanding the structure-performance relationship of carbon-based catalysts has been established by investigating the effect of these regulation methods on catalyst performance. Finally, the opportunities, challenges and potential applications of carbon-based nanocatalysts are discussed.

Efficient conversion of lactic acid to alanine over noble metal supported on Ni@C catalysts

Alanine (Ala), regarded as the building block for protein synthesis, has been widely used in the field of food processing, pharmaceutical, and bio-based plastic industries. Containing plenty of oxygenic functional groups, biomass-derived chemicals are proper for Ala synthesis in an economic and green way via amination. In this work, lactic acid (LA) derived from renewable biomass and waste glycerol (the major by-product of biodiesel industry) was used to produce Ala. Here, a series of magnetic catalysts M/Ni@C (M = Ru, Pt, Pd, Ir, and Rh) were synthesized by ethylene glycol reduction of metal M supported on encapsulated Ni@C. Compared with catalysts based on other M metals, Ru/Ni@C catalysts exhibited extraordinary efficiency with 91.4% selectivity for Ala synthesis from LA (63.7% yield of Ala and 69.7% conversion of LA). The results of experiments and catalyst characterization indicated that the doping of M metals could improve the dehydrogenation ability of catalysts, as well as the ability of NH₃ adsorption, facilitating the reaction towards Ala. Overall, this study provides an efficient chemo-catalytic way for the production of Ala from biomass-derived substrates.

Lactic acid can be converted into alanine with a high selectivity of 91.4% over Ru/Ni@C catalysts.

Pt nanoparticles supported on Nb-modified TiO2 as an efficient heterogeneous catalyst for the conversion of cellulose to light bioalcohols

SMSI-introduced Pt/NbTi catalysts with abundant acid sites are very active for the hydrogenolysis of cellulose into light bioalcohols.

Cellulose hydrogenolysis to alcohol and ketone products using Co@C catalysts in the phosphoric acid aqueous solution

Combining encapsulated Co@C catalyst and H3PO4 aqueous solution, high value-added chemicals that are widely used in various fields can be obtained from renewable biomass materials.

Catalytic Production of Oxygenated and Hydrocarbon Chemicals From Cellulose Hydrogenolysis in Aqueous Phase

As the most abundant polysaccharide in lignocellulosic biomass, a clean and renewable carbon resource, cellulose shows huge capacity and roused much attention on the methodologies of its conversion to downstream products, mainly including platform chemicals and fuel additives. Without appropriate treatments in the processes of cellulose decompose, there are some by-products that may not be chemically valuable or even truly harmful. Therefore, higher selectivity and more economical and greener processes would be favored and serve as criteria in a correlational study. Aqueous phase, an economically accessible and immensely potential reaction system, has been widely studied in the preparation of downstream products of cellulose. Accordingly, this mini-review aims at making a related summary about several conversion pathways of cellulose to target products in aqueous phase. Mainly, there are four categories about the conversion of cellulose to downstream products in the following: (i) cellulose hydrolysis hydrogenation to saccharides and sugar alcohols, like glucose, sorbitol, mannose, etc.; (ii) selective hydrogenolysis leads to the cleavage of the corresponding glucose C-C and C-O bond, like ethylene glycol (EG), 1,2-propylene glycol (PG), etc.; (iii) dehydration of fructose and further oxidation, like 5-hydroxymethylfurfural (HMF), 2,5-furandicarboxylic acid (FDCA), etc.; and (iv) production of liquid alkanes via hydrogenolysis and hydrodeoxygenation, like pentane, hexane, etc. The representative products were enumerated, and the mechanism and pathway of mentioned reaction are also summarized in a brief description. Ultimately, the remaining challenges and possible further research objects are proposed in perspective to provide researchers with a lucid research direction.

Self-assembled tetramethyl cucurbit[6]uril–polyoxometalate nanocubes as efficient and recyclable catalysts for the preparation of propyl gallate

A novel class of cucurbit[n]urils–polyoxometalate (Q[n]–POM) hybrids and tetramethyl cucurbit[6]uril–phosphomolybdic acid (TMeQ[6]–PMA) nanocubes (NCs), are synthesized via a one-step self-assembly method.