Phendione-Transition-Metal Complexes with Bipolar Redox Activity for Lithium Batteries

Co-Ti Bimetallic Complex-Induced Phase Modulation of Co@Black TiO2 for Catalytic Hydrogenation of Cinnamaldehyde

Transition-metal-doped black titania, primarily in the anatase phase, shows promise for redox reactions, water splitting, hydrogen generation, and organic pollutant removal, but exploring other titania phases for broader catalytic applications is underexplored. This study introduces a synthetic approach using a Co-Ti bimetallic complex bridged by a 1,10-phenanthroline-5,6-dione ligand as a precursor for the synthesis of cobalt-doped black titania [Co@L2N@b-TiO2]. The synthesis involves precise control of pyrolysis conditions, yielding a distinct structure dominated by the rutile phase over anatase, with active cobalt encapsulated within a nitrogen-doped graphitic layer, primarily as Co0 rather than CoII and CoIII. The synthesized material is employed for the selective hydrogenation of cinnamaldehyde (CAL) to cinnamyl alcohol (COL) under industrially viable conditions. The efficiency and selectivity of Co@L2N@b-TiO2 was compared with other catalysts, including cobalt-doped rutile TiO2 (Co@r-TiO2), anatase TiO2 (Co@a-TiO2), and black titania (Co@b-TiO2) as well as materials pyrolyzed under different atmospheres and temperatures, materials with phenanthroline ligands, and materials lacking any ligands. The superior performance of Co@L2N@b-TiO2 is attributed to its high surface area, stable Co0 within the nitrogen-doped graphitic layer, and composition of rutile and anatase phases of TiO2 and Ti2O3 (referred to as RAT), along with the synergistic interaction between RAT and Co0. These factors significantly influence the efficiency and selectivity of COL over hydrocinnamaldehyde (HCAL) and hydrocinnamyl alcohol (HCOL), indicating potential for broader applications beyond catalysis, particularly in designing of black titania-based materials.

Electropolymerization of Donor-Acceptor Conjugated Polymer for Efficient Dual-Ion Storage

Rationally designed organic redox-active materials have attracted numerous interests due to their excellent electrochemical performance and reasonable sustainability. However, they often suffer from poor cycling stability, intrinsic low operating potential, and poor rate performance. Herein, a novel Donor-Acceptor (D-A) bipolar polymer with n-type pyrene-4,5,9,10-tetraone unit storing Li cations and p-type carbazole unit which attracts anions and provides polymerization sites is employed as a cathode for lithium-ion batteries through in situ electropolymerization. The multiple redox reactions and boosted kinetics by the D-A structure lead to excellent electrochemical performance of a high discharge capacity of 202 mA h g-1 at 200 mA g-1, impressive working potential (2.87 and 4.15 V), an outstanding rate capability of 119 mA h g-1 at 10 A g-1 and a noteworthy energy density up to 554 Wh kg-1. This strategy has significant implications for the molecule design of bipolar organic cathode for high cycling stability and high energy density.

High performance Li-, Na-, and K-ion storage in electrically conducting coordination polymers

Coordination polymers (CPs) made of redox-active organic moieties and metal ions emerge as an important class of electroactive materials for battery applications. However, the design and synthesis of high voltage alkali-cation reservoir anionic CPs remains challenging, hindering their practical applications. Herein, we report a family of electrically conducting alkali-cation reservoir CPs with the general formula of A₂-TM-PTtSA (wherein A = Li⁺, Na⁺, or K⁺; TM = Fe²⁺, Co²⁺, or Mn²⁺; and PTtSA = benzene-1,2,4,5-tetra-methylsulfonamide). The incorporation of transition metal centers not only enables intrinsic high electrical conductivity, but also shows an impressive redox potential increase of as high as 1 V as compared to A₄-PTtSA analogues, resulting in a class of organometallic cathode materials with a high average redox potential of 2.95-3.25 V for Li-, Na- and K-ion batteries. A detailed structure - composition - physicochemical properties - performance correlation study is provided relying on experimental and computational analysis. The best performing candidate shows excellent rate capability (86% of the nominal capacity retained at 10C rate), remarkable cycling stability (96.5% after 1000 cycles), outstanding tolerance to low carbon content (5 wt%), high mass loading (50 mg cm^-2), and extreme utilisation conditions of low earth orbit space environment tests. The significance of the disclosed alkali-ion reservoir cathodes is further emphasized by utilizing conventional Li-host graphite anode for full cell assembly, attaining a record voltage of 3 V in an organic cathode Li-ion proof-of-concept cell.

Deciphering the Thermal and Electrochemical Behaviors of Dual Redox-Active Iron Croconate Violet Coordination Complexes

Interest in coordination compounds based on non-innocent ligands (NILs) for electrochemical energy storage has risen in the last few years. We have focused our attention on an overlooked redox active linker, croconate violet, which has not yet been addressed in this field although closely related to standard NILs such as catecholate and tetracyanoquinodimethane. Two anionic complexes consisting of Fe(II) and croconate violet (-2) with balancing potassium cations were isolated and structurally characterized. By a combination of in situ and ex situ techniques (powder and single-crystal X-ray diffraction, infrared, and ⁵⁷Fe Mössbauer spectroscopies), we have shown that their dehydration occurs through complex patterns, whose reversibility depends on the initial crystal structure but that the structural rearrangements around the iron cations occur without any oxidation. While electrochemical studies performed in solution clearly show that both the organic and inorganic parts can be reversibly addressed, in the solid state, poor charge storage capacities were initially measured, mainly due to the solubilization of the solids in the electrolyte. By optimizing the formulation of the electrode and the composition of the electrolyte, a capacity of >100 mA h g^-1 after 10 cycles could be achieved. This suggests that this family of redox active linkers deserves to be investigated for solid-state electrochemical energy storage, although it requires the solving of the issues related to the solubilization of the derived coordination compounds.

An Electrically Conducting Li-Ion Metal-Organic Framework

Metal-organic frameworks (MOFs) have emerged as an important, yet highly challenging class of electrochemical energy storage materials. The chemical principles for electroactive MOFs remain, however, poorly explored because precise chemical and structural control is mandatory. For instance, no anionic MOF with a lithium cation reservoir and reversible redox (like a conventional Li-ion cathode) has been synthesized to date. Herein, we report on electrically conducting Li-ion MOF cathodes with the generic formula Li₂-M-DOBDC (wherein M = Mg²⁺ or Mn²⁺; DOBDC^4- = 2,5-dioxido-1,4-benzenedicarboxylate), by rational control of the ligand to transition metal stoichiometry and secondary building unit (SBU) topology in the archetypal CPO-27. The accurate chemical and structural changes not only enable reversible redox but also induce a million-fold electrical conductivity increase by virtue of efficient electronic self-exchange facilitated by mix-in redox: 10^-7 S/cm for Li₂-Mn-DOBDC vs 10^-13 S/cm for the isoreticular H₂-Mn-DOBDC and Li₂-Mg-DOBDC, or the Mn-CPO-27 compositional analogues. This particular SBU topology also considerably augments the redox potential of the DOBDC^4- linker (from 2.4 V up to 3.2 V, vs Li⁺/Li⁰), a highly practical feature for Li-ion battery assembly and energy evaluation. As a particular cathode material, Li₂-Mn-DOBDC displays an average discharge potential of 3.2 V vs Li⁺/Li⁰, demonstrates excellent capacity retention over 100 cycles, while also handling fast cycling rates, inherent to the intrinsic electronic conductivity. The Li₂-M-DOBDC material validates the concept of reversible redox activity and electronic conductivity in MOFs by accommodating the ligand's noncoordinating redox center through composition and SBU design.

Metal-Organic Frameworks and Their Derivatives: Designing Principles and Advances toward Advanced Cathode Materials for Alkali Metal Ion Batteries

Metal-organic frameworks (MOFs) and their derivatives have attracted enormous attention in the field of energy storage, due to their high specific surface area, tunable structure, highly ordered pores, and uniform metal sites. Compared with the wide research of MOFs and their related materials on anode materials for alkali metal ion batteries, few works are on cathode materials. In this review, design principles for promoting the electrochemical performance of MOF-related materials in terms of component/structure design, composite fabrication, and morphology engineering are presented. By summarizing the advancement of MOFs and their derivatives, Prussian blue and its analogs, and MOF surface coating, challenges and opportunities for future outlooks of MOF-related cathode materials are discussed.

Recent progress in metal-organic framework/graphene-derived materials for energy storage and conversion: design, preparation, and application

Graphene or chemically modified graphene, because of its high specific surface area and abundant functional groups, provides an ideal template for the controllable growth of metal-organic framework (MOF) particles. The nanocomposite assembled from graphene and MOFs can effectively overcome the limitations of low stability and poor conductivity of MOFs, greatly widening their application in the field of electrochemistry. Furthermore, it can also be utilized as a versatile precursor due to the tunable structure and composition for various derivatives with sophisticated structures, showing their unique advantages and great potential in many applications, especially energy storage and conversion. Therefore, the related studies have been becoming a hot research topic and have achieved great progress. This review summarizes comprehensively the latest methods of synthesizing MOFs/graphene and their derivatives, and their application in energy storage and conversion with a detailed analysis of the structure-property relationship. Additionally, the current challenges and opportunities in this field will be discussed with an outlook also provided.