Recent Advances in Heterogeneous Photo-Driven Oxidation of Organic Molecules by Reactive Oxygen Species

Construction of dual Z-scheme Ag3VO4-BiVO4/InVO4 photocatalysts using vanadium source from spent catalysts for contaminated water treatment and bacterial inactivation

Vanadate-based photocatalysts have recently attracted substantial attention owing to their outstanding photocatalytic activity for degrading organic pollutants and generating energy via photocatalytic processes. However, the relatively high price of vanadium has hindered the development of vanadate-based photocatalysts for various applications. Spent catalysts obtained from oil refineries typically contain a significant quantity of vanadium, making them valuable for recovery and utilization as precursors for the production of high-value-added photocatalysts. In this study, we transformed the V present in spent catalysts produced by the petrochemical industry into ternary vanadate-based photocatalysts [BiVO4/InVO4/Ag3VO4 (BVO/IVO/AVO, respectively)] designed for water remediation. The ternary composites revealed an enhanced photocatalytic capability, which was 1.42 and 5.1 times higher than those of the binary BVO/IVO and pristine AVO due to the facilitated charge separation. The ternary photocatalysts not only effectively treated wastewater containing various organic dyes, such as methylene blue (MB), rhodamine 6G (R6G), and brilliant green (BG), but also exhibited remarkable photocatalytic performance in the degradation of antibiotics, reduction of Cr(VI), and bacterial inactivation. This paper proposes a feasible route for recycling industrial waste as a source of vanadium to produce highly efficient vanadate-based photocatalysts.

Engineering the physical properties and photocatalytic activities of a β-ketoenamine COF using continuous flow synthesis

Covalent Organic Frameworks (COF) having conjugated backbone are an interesting class of metal-free, visible light active, heterogeneous photocatalysts. Interestingly, synthesis of COF using continuous flow process has emerged as an efficient, alternative method when compared to the traditional batch process. Here, we demonstrate the possibility to engineer the physical properties and hence the adsorption and catalytic activities of a β-ketoenamine COF by varying monomer flow rate and microreactor design during the continuous flow synthesis. Crystallinity of the COF increases on varying the monomer flow rate from 100 (S-100) to 500 (S-500) and up to 1000 μLmin-1 (S-1000), in an S-shaped microreactor, resulting in an enhanced surface area: 525, 722 and 1119 m2g-1 respectively. The photophysical properties of the COF are also found to vary significantly with the change in flow synthesis conditions. S-1000 is characterized by the highest adsorption of MB, due to its high surface area and accessible pores. On the other hand, S-500 shows the highest photocurrent, a low recombination of photogenerated charges and the lowest charge transfer resistance. Thus, S-500 is found to be the best photocatalyst for the removal of a model pollutant (methylene blue, MB). Further, enhanced photocatalytic removal of MB using S-500 could be achieved by performing the photocatalysis in continuous flow.

In situ growth of BiOBr on copper foam conductive substrate with enhanced photocatalytic performance

Photocatalysis technology based on solar-powered semiconductors is widely recognized as a promising approach for achieving eco-friendly, secure, and sustainable degradation of organic contaminants. Nevertheless, conventional photocatalysts exhibit drawbacks such as a wide bandgap, and rapid recombination of photoinduced electron/hole pairs, in addition to complicated separation and recovery procedures. In this research, we cultivated BiOBr in situ on the surface of copper foam to fabricate a functional photocatalyst (denoted as BiOBr/Cu foam), which was subsequently employed for the photodegradation of Methylene Blue. Based on photodegradation experiments, the 0.3 BiOBr/Cu foam demonstrates superior photocatalytic efficacy compared to other photocatalysts under solar light irradiation. Furthermore, its ease of separation from the solution enhances its potential for reuse. The analysis of charge transfer revealed that the copper foam functions as an effective electron scavenger within the BiOBr/Cu foam, thereby facilitating charge separation and the generation of photo-induced holes. This phenomenon contributes to a significantly enhanced production of hydroxyl radicals. This study provides a valuable perspective on the design and synthesis of photocatalysts with heightened practicality, employing a conductive substrate.

Metal-Free Activation of Molecular Oxygen by 9-Fluorenone-Based Porous Organic Polymers for Selective Aerobic Oxidation

Oxygen activation is a critical step in heterogeneous oxidative processes, particularly in catalytic, electrolytic, and pharmaceutical applications. Among the various catalysts available for photocatalytic O2 activation, homogeneous aryl ketones are at the forefront. To avoid the degradation and deactivation of aryl ketones, 9-fluorenone-based porous organic polymers were designed and regulated by doping them with co-monomers. The obtained heterogeneous photocatalyst showed good performance in O2 activation, and its performance was better than that of homogeneous 9-fluorenone. The obtained heterogeneous photocatalyst showed good reusability. We believe that the presented method and findings represent an important step toward designing catalysts tailored for specific tasks.

Facile Preparation of PVDF/CoFe2O4-ZnO Hybrid Membranes for Water Depollution

In this investigation, CoFe2O4-PVDF and CoFe2O4-ZnO-PVDF hybrid membranes were prepared using a modified phase inversion method in which a magnetic field was applied during the casting process to ensure a uniform distribution of nanomaterials on the membrane surface. Thus, better absorption of light and increased participation of nanoparticles in the photodegradation process is ensured. The influence of nanomaterials on the crystalline structure, surface morphology, and hydrophilicity properties of the PVDF membrane was investigated. The obtained results indicated that the hybrid membrane exhibited significant differences in its intrinsic properties due to the nanomaterials addition. The hydrophilicity properties of the PVDF membrane were improved by the presence of nanoparticles. The photocatalytic decomposition of aqueous Rhodamine B solution in the presence of the prepared membrane and under visible light irradiation was tested. The hybrid membrane containing CoFe2O4-ZnO on its surface exhibited a high removal rate.

Synergistic Induction of Solvent and Ligand-Substitution in Single-Crystal to Single-Crystal Transformations toward a MOF with Photocatalytic Dye Degradation

External-stimuli responsiveness as found in natural organisms and smart materials is attractive for functional materials scientists who attempt to design and imitate fascinating behavior into their materials. Herein, we report a couple of new solvent-responsive isostructural two-dimensional cationic metal-organic frameworks (MOFs) of Mn(II) (1a) and Zn(II) (2a) that undergo unprecedented single-crystal to single-crystal (SCSC) transformation toward the corresponding isostructural three-dimensional MOFs of Mn(II) (1b) and Zn(II) (2b). The 2D MOFs 1a and 2a have been effortlessly and rapidly synthesized via the microwave-heating technique. The SCSC transformations are synergistically induced by solvent and ligand-substitution reactions and able to be triggered by water, methanol, ethanol, and n-propanol. Time-dependent SCSC transformations were studied by in situ X-ray diffraction. Investigations on photodegradation of methyl orange showed that Zn-MOF 2b has higher efficiency than Mn-MOF 1b under UV-C irradiation at 300 min, 94.27%, and 21.91%, respectively. The influence of charge on the dye molecules, heterogeneity of the catalysis, and •OH radical-scavenging test was studied. First-principles computations suggest that the high photocatalytic activity of 2b may be attributed to its suitable band-edge position for redox reactions.

Simultaneous S-scheme promoted Ag@AgVO3/g-C3N4/CeVO4 heterojunction with enhanced charge separation and photo redox ability towards solar photocatalysis

Photocatalytic removal of toxic contaminants is one of the emerging techniques for water remediation, but it suffers from low redox ability, charge recombination and poor light harvesting efficiency. The present work reports a simultaneous S-scheme promoted by CeVO₄/g-C₃N₄/Ag@AgVO₃. The formation of the S-scheme mechanism enhanced the generation of photogenerated carriers and also improved the redox ability of the electrons and holes in the reduction and oxidation photocatalysts. The ternary demonstrated remarkable photo switching properties along with efficient charge separation which was achieved through dual interfacial interaction within the ternary (Ag@AgVO₃/g-C₃N₄ and CeVO₄/g-C₃N₄). The heterojunction formation was verified through the shift in binding energy spectra in the X-ray Photoelectron spectroscopy (XPS), and high-resolution transmission electron microscopy analysis (HR-TEM). The ternary demonstrated reduced PL intensity, width of space charge region and an upsurge in photogenerated current density in the order of 93 μA/cm2 (∼6X higher than all the pristine). This resulted in efficient removal of methyl orange, methylene blue and endocrine disruptive bisphenol-A with a removal rate of 0.02 min^-1, 0.03 min^-1 and 0.0087 min^-1 and an apparent quantum yield of 4.6 × 10^-9 (Methylene Orange), 6.89 × 10^-9 (Methylene Blue) and 2 × 10^-9 (Bisphenol A/H₂O₂).

Photoelectrochemical Epoxidation of Cyclohexene on an α-Fe2O3 Photoanode Using Water as the Oxygen Source

This study developed a safe and sustainable route for the epoxidation of cyclohexene using water as the source of oxygen at room temperature and ambient pressure. Here, we optimized the cyclohexene concentration, volume of solvent/water (CH₃CN, H₂O), time, and potential on the photoelectrochemical (PEC) cyclohexene oxidation reaction of the α-Fe₂O₃ photoanode. The α-Fe₂O₃ photoanode epoxidized cyclohexene to cyclohexene oxide with a 72.4 ± 3.6% yield and a 35.2 ± 1.6% Faradaic efficiency of 0.37 V vs Fc/Fc⁺ (0.8 V_Ag/AgCl) under 100 mW cm^-2. Furthermore, the irradiation of light (PEC) decreased the applied voltage of the electrochemical cell oxidation process by 0.47 V. This work supplies an energy-saving and environment-benign approach for producing value-added chemicals coupled with solar fuel generation. Epoxidation with green solvents via PEC methods has a high potential for different oxidation reactions of value-added and fine chemicals.

Aerobic cross-dehydrogenative coupling of toluenes and o-phenylenediamines by flavin photocatalysis for the facile synthesis of benzimidazoles

Herein, we demonstrate a green atom-economical synthesis of benzimidazoles via the flavin-photocatalysed aerobic oxidative cross-dehydrogenative coupling of toluenes and o-phenylenediamines. The proposed metal-free reaction proceeds in methanol/H₂O under visible light irradiation by consuming only molecular oxygen from atmospheric air and produces only water as waste.

Simultaneous Removal of Antibiotic Resistant Bacteria, Antibiotic Resistance Genes, and Micropollutants by FeS2@GO-Based Heterogeneous Photo-Fenton Process

The co-occurrence of various chemical and biological contaminants of emerging concerns has hindered the application of water recycling. This study aims to develop a heterogeneous photo-Fenton treatment by fabricating nano pyrite (FeS₂) on graphene oxide (FeS₂@GO) to simultaneously remove antibiotic resistant bacteria (ARB), antibiotic resistance genes (ARGs), and micropollutants (MPs). A facile and solvothermal process was used to synthesize new pyrite-based composites. The GO coated layer forms a strong chemical bond with nano pyrite, which enables to prevent the oxidation and photocorrosion of pyrite and promote the transfer of charge carriers. Low reagent doses of FeS₂@GO catalyst (0.25 mg/L) and H₂O₂ (1.0 mM) were found to be efficient for removing 6-log of ARB and 7-log of extracellular ARG (e-ARG) after 30 and 7.5 min treatment, respectively, in synthetic wastewater. Bacterial regrowth was not observed even after a two-day incubation. Moreover, four recalcitrant MPs (sulfamethoxazole, carbamazepine, diclofenac, and mecoprop at an environmentally relevant concentration of 10 μg/L each) were completely removed after 10 min of treatment. The stable and recyclable composite generated more reactive species, including hydroxyl radicals (HO^•), superoxide radicals (O₂^• -), singlet oxygen (¹O₂). These findings highlight that the synthesized FeS₂@GO catalyst is a promising heterogeneous photo-Fenton catalyst for the removal of emerging contaminants.

Synthesis of Fe3O4@CdS@CQDs ternary core-shell heterostructures as a magnetically recoverable photocatalyst for selective alcohol oxidation coupled with H2O2 production

Photocatalytic aerobic oxidation of aromatic alcohols to corresponding aldehydes coupled with producing hydrogen peroxide (H₂O₂) represents one of the most efficient strategies for converting solar energy into chemical energy. In this work, a magnetically recoverable photocatalyst of Fe₃O₄@CdS@CQDs ternary core-shell heterostructures is elaborately fabricated through the hydrothermal growth of CdS on Fe₃O₄ nanospheres with in-situ incorporation of carbon quantum dots (CQDs) and used for selective alcohol oxidation coupled with H₂O₂ production. The Fe₃O₄@CdS@CQDs photocatalyst possess distinct advantages of full solar spectral absorption, efficient charge separation, and high stability. The Fe₃O₄-nanosphere cores not only endow photocatalyst with the characteristics of magnetic recovery but also form Fe₃O₄@CdS Z-scheme heterojunction to prevent CdS from photocorrosion. The in-situ modified CQDs act as charge mediators to accelerate the photogenerated electron-hole separation and afford active sites to facilitate H₂O₂ production. As a result, the Fe₃O₄@CdS@CQDs photocatalyst exhibits excellent performance in selectively converting benzyl alcohol to benzaldehyde accompanied with H₂O₂ production. The generation rates of benzaldehyde and H₂O₂ reach up to 57.22 and 27.06 mmol·g_CdS^-1·h^-1, respectively. This work highlights a rational construction of magnetic heterostructure photocatalyst and its application in the photo-redox coupling reactions.

Photoelectrochemical alcohols oxidation over polymeric carbon nitride photoanodes with simultaneous H2 production

The photoelectrochemical oxidation of organic molecules into valuable chemicals is a promising technology, but its development is hampered by the poor stability of photoanodic materials in aqueous solutions, low faradaic efficiency, low product selectivity, and a narrow working pH range. Here, we demonstrate the synthesis of value-added aldehydes and carboxylic acids with clean hydrogen (H₂) production in water using a photoelectrochemical cell based solely on polymeric carbon nitride (CN) as the photoanode. Isotope labeling measurements and DFT calculations reveal a preferential adsorption of benzyl alcohol and molecular oxygen to the CN layer, enabling fast proton abstraction and oxygen reduction, which leads to the synthesis of an aldehyde at the first step. Further oxidation affords the corresponding acid. The CN photoanode exhibits excellent stability (>40 h) and activity for the oxidation of a wide range of substituted benzyl alcohols with high yield, selectivity (up to 99%), and faradaic efficiency (>90%).

Roles of reactive oxygen species in antibiotic resistant bacteria inactivation and micropollutant degradation in Fenton and photo-Fenton processes

Reactive oxygen species play a critical role in degrading chemical or biological contaminants in advanced oxidation processes. However, it is still not clear whether conventional Fenton and photo-Fenton processes generate different reactive oxygen species, respectively. This study revealed the roles of reactive oxygen species (ROS) for simultaneous removal of antibiotic resistant bacteria (ARB) and recalcitrant micropollutant using three processes, i.e., conventional Fenton, photo-Fenton, and ethylenediamine-N, N'-disuccinic acid (EDDS) modified photo-Fenton. Both chemical scavengers and electron paramagnetic resonance spectroscopy confirmed the generation of various ROS and their contribution towards bacterial inactivation and micropollutant degradation. Results showed ARB and carbamazepine (CBZ) elimination efficiency in the order: EDDS modified photo-Fenton process > photo-Fenton process > Fenton process. The ARB detection limit (6-log ARB) was observed within 10 min at lower doses of 0.1 mM Fe³⁺, 0.2 mM EDDS, and 0.5 mM hydrogen peroxide (H₂O₂). With the same dose, it took longer (60 min) to remove CBZ, while 2.5 times higher H₂O₂ dose (1.25 mM) removed around 99% of CBZ within 10 min treatment. The present study highlighted that the hydroxyl radical (HO^•) plays a dominant role, while singlet oxygen (¹O₂) and superoxide radical anion (O₂^•-) exhibit moderate effects to remove the hazards. Our findings provide mechanistic insights into the role of various reactive oxygen species on degrading micropollutants and inactivating ARB.

Encapsulation-Led Adsorption of Neutral Dyes and Complete Photodegradation of Cationic Dyes and Antipsychotic Drugs by Lanthanide-Based Macrocycles

Molecular architectures offering large cavities can accommodate guest molecules, while their compositional engineering allows tunability of the band gap to support photocatalysis using visible light. In this work, two lanthanide (Ln)-based macrocycles, synthesized using a cobalt-based metalloligand and offering large rectangular cavities, exhibited selective adsorption of neutral dyes over both anionic and cationic dyes. Both Ln macrocycles illustrated complete photodegradation of cationic dyes using visible light without the use of any oxidant. Both Ln macrocycles exhibited complete photodegradation of not only cationic dyes but also a few phenothiazine-based antipsychotic drugs. Photocatalysis involved the generation of reactive oxygen species (ROS), which was corroborated with the band gap of two Ln macrocycles. These results were supported by radical scavenger studies and the quantitative estimation of superoxide and hydroxyl radicals. Complete photodegradation of both dyes and drugs was confirmed by spectral studies, while the generation of CO₂ and N₂ gases was established by gas chromatography. Importantly, Ln macrocycles were able to distinguish between the neutral dyes that were quantitatively adsorbed and the cationic dyes/drugs that were completely photodegraded.

Modulating oxygen vacancies on bismuth-molybdate hierarchical hollow microspheres for photocatalytic selective alcohol oxidation with hydrogen peroxide production

Photocatalytic selective oxidation of alcohols into high value-added carbonyl compounds accompanied by producing hydrogen peroxide (H₂O₂) is undoubtedly a more efficient solar energy conversion strategy with high atom economy. Herein, we have developed an efficient photocatalyst of bismuth-molybdate (Bi₂MoO₆) hierarchical hollow microspheres with tunable surface oxygen vacancies (OVs) for promoting the photocatalytic selective alcohol oxidation with H₂O₂ production. The effect of surface OVs on the photocatalytic efficiency is studied systematically by comparing the performance of different photocatalysts. The benzaldehyde and H₂O₂ production rates over the OV-rich Bi₂MoO₆ photocatalyst reach up to 1310 and 67.2 μmol g^-1 h^-1, respectively, which are 2.3 and 4.0 times those generated from the OV-poor Bi₂MoO₆ hollow microspheres. The roles of various active radicals in the photocatalytic reaction are probed by a series of controlled experiments and in situ ESR measurements, revealing that both superoxide radical (•O₂^-) and carbon-centered radical are the key active intermediates. The introduction of surface OVs on Bi₂MoO₆ hollow microspheres accelerates the separation and transfer of photo-generated charge carriers as well as enhances the adsorption and activation of reactant molecules, thereby greatly promoting the photocatalytic selective oxidation of alcohols along with H₂O₂ production. This work not only demonstrates a facile strategy for the preparation of high-efficiency photocatalysts by simultaneous modulations of morphology and surface defects, but also offers insight into developing the dual-functional photocatalytic reactions for the full utilizations of photoinduced electrons and holes.

Precious Metal-Free LaMnO3 Perovskite Catalyst with an Optimized Nanostructure for Aerobic C-H Bond Activation Reactions: Alkylarene Oxidation and Naphthol Dimerization

In this article, we describe the development of a new aerobic C-H oxidation methodology catalyzed by a precious metal-free LaMnO₃ perovskite catalyst. Molecular oxygen is used as the sole oxidant in this approach, obviating the need for other expensive and/or environmentally hazardous stoichiometric oxidants. The electronic and structural properties of the LaMnO₃ catalysts were systematically optimized, and a reductive pretreatment protocol was proved to be essential for acquiring the observed high catalytic activities. It is demonstrated that this newly developed method was extremely effective for the oxidation of alkylarenes to ketones as well as for the oxidative dimerization of 2-naphthol to 1,1-binaphthyl-2,2-diol (BINOL), a particularly important scaffold for asymmetric catalysis. Detailed spectroscopic and mechanistic studies provided valuable insights into the structural aspects of the active catalyst and the reaction mechanism.