Fluorescence array detector for large-field quantitative fluorescence cytometry

The cytometric future: it ain't necessarily flow!

Initial approaches to cytometry for classifying and characterizing cells were based on microscopy; it was necessary to collect relatively high-resolution images of cells because only a few specific reagents usable for cell identification were available. Although flow cytometry, now the dominant cytometric technology, typically utilizes lenses similar to microscope lenses for light collection, improved, more quantitative reagents allow the necessary information to be acquired in the form of whole-cell measurements of the intensities of light transmission, scattering, and/or fluorescence.Much of the cost and complexity of both automated microscopes and flow cytometers arises from the necessity for them to measure one cell at a time. Recent developments in digital camera technology now offer an alternative in which one or more low-magnification, low-resolution images are made of a wide field containing many cells, using inexpensive light-emitting diodes (LEDs) for illumination. Minimalist widefield imaging cytometers can provide a smaller, less complex, and substantially less expensive alternative to flow cytometry, critical in systems intended for in resource-poor areas. Minimalism is, likewise, a good philosophy in developing instrumentation and methodology for both clinical and large-scale research use; it simplifies quality assurance and compliance with regulatory requirements, as well as reduces capital outlays, material costs, and personnel training requirements. Also, importantly, it yields "greener" technology.

A single platform image cytometer for resource-poor settings to monitor disease progression in HIV infection

BACKGROUND

For resource-poor countries, affordable methods are required for enumeration of CD4(+) T lymphocytes of HIV-positive patients. For infants, additional determination of CD4/CD8 ratio is needed.

METHODS

We determine the CD4(+) and CD8(+) T lymphocytes as the CD3(+)CD4(+) and CD3(+)CD8(+) population of blood cells. Target cells are CD3-immunomagnetically separated from the whole blood, and CD4-Phycoerythrin and CD8-PerCP immunofluorescently labeled. A point-of-care single platform image cytometer was developed to enumerate the target CD3(+)CD4(+) and CD3(+)CD8(+) populations. It has light-emitting diodes illumination, is fully computer-controlled, operates from a 12 V battery, and was designed to be cheap and easy-to-handle. Target cells are imaged on a CCD camera and enumerated by an image analysis algorithm. The cytometer outputs the absolute number of CD4(+) and CD8(+) T lymphocytes/microl and CD4/CD8 ratio.

RESULTS

The quality of the cell images obtained with the cytometer is sufficient for a reliable enumeration of target cells. The image cytometer achieves an accuracy of better than 10% in the range of 50-1700 cells/microl. Analysis of blood samples from HIV patients yields a good agreement with the TruCount method for CD4 and CD8 count and CD4/CD8 ratio.

CONCLUSIONS

The image cytometer is affordable (component costs $3,000), compact (25 x 25 x 20 cm(3)), and uses disposable test materials, making it a good candidate to monitor progression of immunodeficiency disease in resource-poor settings.

Personal cytometers: slow flow or no flow?

BACKGROUND

Although some manufacturers have optimistically described instruments with prices in the 40,000 US dollars range as "personal cytometers", analogy with the personal computer suggests that the target price for a true "personal" cytometer should be under 5,000 US dollars. Since such an apparatus could find a wide range of applications in cytomics in both developing and developed countries, it seemed desirable to consider its technical and economic feasibility.

METHODS

Using resolution targets and a variety of fluorescent bead standards immobilized on filters and/or slides, we evaluated high-intensity LEDs as fluorescence excitation sources, relatively inexpensive CCD cameras as detectors, and 35 mm camera lenses and plastic low-power microscope optics for light collection in a simple, inexpensive low-resolution imaging cytometer.

RESULTS

The components tested could be combined toproduce an instrument capable of detecting fewer than 10,000 molecules of cell-associated fluorescent label, and thus applicable to a broad range of cytometric tasks.

CONCLUSIONS

Given the requirements for light sources, detectors, optics, mechanics, electronics and data analysis hardware and software, and the components presently available, it should be easier to reach the desired 5,000 US dollars price point with an image cytometer than with a flow cytometer.

A large field CCD system for quantitative imaging of microarrays

We describe a charge-coupled device (CCD) imaging system for microarrays capable of acquiring quantitative, high dynamic range images of very large fields. Illumination is supplied by an arc lamp, and filters are used to define excitation and emission bands. The system is linear down to fluorochrome densities ≪1 molecule/µm². The ratios of the illumination intensity distributions for all excitation wavelengths have a maximum deviation ∼±4% over the object field, so that images can be analyzed without computational corrections for the illumination pattern unless higher accuracy is desired. Custom designed detection optics produce achromatic images of the spectral region from ∼ 450 to ∼750 nm. Acquisition of a series of images of multiple fluorochromes from multiple arrays occurs under computer control. The version of the system described in detail provides images of 20 mm square areas using a 27 mm square, 2K × 2K pixel, cooled CCD chip with a well depth of ∼10⁵ electrons, and provides ratio measurements accurate to a few percent over a dynamic range in intensity >1000. Resolution referred to the sample is 10 µm, sufficient for obtaining quantitative multicolor images from >30 000 array elements in an 18 mm × 18 mm square.

?Cellular astronomy??A foreseeable future in cytometry

Advances in electro-optic technology within the past 2 years, notably the development of high-intensity light-emitting diodes and highly efficient charge-coupled device cameras, have made it feasible to produce small, simple, rugged, automated fluorescence image cytometers, with selling prices well below 10,000 US dollars, that can make measurements previously the exclusive domain of flow and scanning cytometers costing many times more. It should be feasible to apply the new cytometric technology in scientific and geographic areas for which a previous generation of instruments was too complex and too expensive, e.g., to problems of diagnosis and management of infectious diseases prevalent at critical levels in resource-poor areas, such as the human immunodeficiency virus, malaria, and tuberculosis.

Novel surface and multicolor charge coupled device-based fluorescent imaging system for DNA microarrays

We report a novel support, concomitant attachment chemistry, and a fluorescent imaging system for DNA microarrays. The support consists of soda lime glass coated with a layer of chromium, which eliminates any autofluorescence from the underlying glass substrate and reduces nonspecific probe binding. Attachment of DNA fragments exceeding 300 nucleotides in length is achieved without chemical modifications of either the chrome surface or the DNA itself. The charge coupled device (CCD)-based imaging system employs a 175 W xenon arc lamp as the light source, allowing the use of many different fluorophors. A 14 mm x 9 mm sample area is imaged with a single exposure, which takes between 5 and 20 s for each color plane in typical genomic comparative genomic hybridization type assays. The spatial resolution is limited only by the pixel size of the CCD chip (9 microm). The oblique illumination geometry combined with effective background reduction afforded by the chromium surface enables the system to achieve a detection limit of <5 x 10(7) fluorophors/cm(2) with 10 s integration. In a model system with arrayed lambda DNA targets a dose response was observed over four orders of magnitude in response to hybridizations with increasing amounts of the fluorescent labeled lambda probe.

Validation and quality control of immunophenotyping in clinical flow cytometry

Clinical flow cytometry has evolved from two-parameter quantitative assessment of peripheral blood lymphocytes to six-parameter qualitative evaluation of bone marrow for hematopathology. Leukemia and lymphoma immunophenotyping represent an extremely important complement to morphology in the diagnosis and monitoring of hematopoietic malignancies. The complexity of five- and six-parameter analyses and the interpretation of the data rely on standardization and validation of the instrument, the reagents and the procedure. In addition, flow cytometry laboratories in the U.S. are required to document proficiency testing, sample preparation, method accuracy, specificity, sensitivity and precision. NCCLS and the U.S.-Canadian Consensus Conference have provided recommendations, but each laboratory is ultimately responsible for validating its own qualitative and quantitative procedures. This paper reviews procedures for validation and quality control of all aspects of the operation of a clinical flow cytometry service.

High resolution analysis of DNA copy number variation using comparative genomic hybridization to microarrays

Gene dosage variations occur in many diseases. In cancer, deletions and copy number increases contribute to alterations in the expression of tumour-suppressor genes and oncogenes, respectively. Developmental abnormalities, such as Down, Prader Willi, Angelman and Cri du Chat syndromes, result from gain or loss of one copy of a chromosome or chromosomal region. Thus, detection and mapping of copy number abnormalities provide an approach for associating aberrations with disease phenotype and for localizing critical genes. Comparative genomic hybridization (CGH) was developed for genome-wide analysis of DNA sequence copy number in a single experiment. In CGH, differentially labelled total genomic DNA from a 'test' and a 'reference' cell population are cohybridized to normal metaphase chromosomes, using blocking DNA to suppress signals from repetitive sequences. The resulting ratio of the fluorescence intensities at a location on the 'cytogenetic map', provided by the chromosomes, is approximately proportional to the ratio of the copy numbers of the corresponding DNA sequences in the test and reference genomes. CGH has been broadly applied to human and mouse malignancies. The use of metaphase chromosomes, however, limits detection of events involving small regions (of less than 20 Mb) of the genome, resolution of closely spaced aberrations and linking ratio changes to genomic/genetic markers. Therefore, more laborious locus-by-locus techniques have been required for higher resolution studies. Hybridization to an array of mapped sequences instead of metaphase chromosomes could overcome the limitations of conventional CGH (ref. 6) if adequate performance could be achieved. Copy number would be related to the test/reference fluorescence ratio on the array targets, and genomic resolution could be determined by the map distance between the targets, or by the length of the cloned DNA segments. We describe here our implementation of array CGH. We demonstrate its ability to measure copy number with high precision in the human genome, and to analyse clinical specimens by obtaining new information on chromosome 20 aberrations in breast cancer.

Basic strategies for valid cytometry using image analysis

The present review provides a starting point for setting up an image analysis system for quantitative densitometry and absorbance or fluorescence measurements in cell preparations, tissue sections or gels. Guidelines for instrumental settings that are essential for the valid application of image analysis in cytophotometry and cytofluorometry are described. The general principles of the working mechanism of CCD cameras in combination with general methods to improve the behaviour of the cameras are presented. Optimization of illumination of microscopical and macroscopical objects receives special attention because of its importance for valid cytometry. Sources of errors in quantitative measurements are listed and step-by-step charts for tuning the CCD camera, frame grabber and illumination for the optimal use of the systems are described. Suggestions are given for improvement of image arithmetic in difficult imaging situations, such as low fluorescence signals and high absorbance signals.