Synthesis of Single-Crystal Gold Nano- and Microprisms Using a Solvent-Reductant-Template Ionic Liquid

Exploring the Properties of Unilamellar Vesicle Bilayers Formed by Ionic Liquid Surfactants for Future Applications in Nanomedicine

Two ionic liquids (ILs) with amphiphilic properties composed of 1-butyl-3-methylimidazolium dioctylsulfosuccinate (bmim-AOT) and 1-hexyl-3-methylimidazolium dioctylsulfosuccinate (hmim-AOT) form unilamellar vesicles spontaneously simply by dissolving the IL-like surfactant in water. These novel vesicles were characterized using two different and highly sensitive fluorescent probes: 6-propionyl-2-(dimethylaminonaphthalene) (PRODAN) and trans-4-[4-(dimethylamino)-styryl]-1-methylpyridinium iodide (HC). These fluorescent probes provide information about the physicochemical properties of the bilayer, such as micropolarity, microviscosity, and electron-donor capacity. In addition, the biocompatibility of these vesicles with the blood medium was evaluated, and their toxicity was determined using Dictyostelium discoideum amoebas. First, using PRODAN and HC, it was found that the bilayer composition and the chemical structure of the ions at the interface produced differences between both amphiphiles, making the vesicles different. Thus, the bilayer of hmim-AOT vesicles is less polar, more rigid, and has a lower electron-donor capacity than those made by bmim-AOT. Finally, the results obtained from the hemolysis studies and the growth behavior of unicellular amoebas, particularly utilizing the D. discoideum assay, showed that both vesicular systems do not produce toxic effects up to a concentration of 0.02 mg/mL. This elegant assay, devoid of animal usage, highlights the potential of these newly organized systems for the delivery of drugs and bioactive molecules of different polarities.

Local Heating Induced Single-Crystalline Phase Control in Electrochemical Synthesis of Nanomaterials

Development of synthetic strategies selectively yielding single crystals is desired owing to the facet-dependent chemical reactivities. Recent advances in electrochemical materials synthesis yielded nanomaterials that are surfactant-free, however, typically in polycrystalline forms. In this work, an electrochemical synthetic strategy selectively yielding single-crystalline nanoparticles by implementation of surface-selective heating of the working electrode is developed. Single crystals of copper, silver, gold, and platinum are afforded, and the crystallinity verified by electron diffraction and chemical reactivity studies. Notably, Cu (100) surface prepared by electrochemical synthesis yielded high single product selectivity when applied to electrochemical CO2 reduction catalysis.

Two-Dimensional Metal Nanostructures: From Theoretical Understanding to Experiment

This paper reviews recent studies on the preparation of two-dimensional (2D) metal nanostructures, particularly nanosheets. As metal often exists in the high-symmetry crystal phase, such as face centered cubic structures, reducing the symmetry is often needed for the formation of low-dimensional nanostructures. Recent advances in characterization and theory allow for a deeper understanding of the formation of 2D nanostructures. This Review firstly describes the relevant theoretical framework to help the experimentalists understand chemical driving forces for the synthesis of 2D metal nanostructures, followed by examples on the shape control of different metals. Recent applications of 2D metal nanostructures, including catalysis, bioimaging, plasmonics, and sensing, are discussed. We end the Review with a summary and outlook of the challenges and opportunities in the design, synthesis, and application of 2D metal nanostructures.

Pseudohalogen Chemistry in Ionic Liquids with Non-innocent Cations and Anions

Within the second funding period of the SPP 1708 "Material Synthesis near Room Temperature",which started in 2017, we were able to synthesize novel anionic species utilizing Ionic Liquids (ILs) both, as reaction media and reactant. ILs, bearing the decomposable and non-innocent methyl carbonate anion [CO3 Me]- , served as starting material and enabled facile access to pseudohalide salts by reaction with Me3 Si-X (X=CN, N3 , OCN, SCN). Starting with the synthesized Room temperature Ionic Liquid (RT-IL) [nBu3 MeN][B(OMe)3 (CN)], we were able to crystallize the double salt [nBu3 MeN]2 [B(OMe)3 (CN)](CN). Furthermore, we studied the reaction of [WCC]SCN and [WCC]CN (WCC=weakly coordinating cation) with their corresponding protic acids HX (X=SCN, CN), which resulted in formation of [H(NCS)2 ]- and the temperature labile solvate anions [CN(HCN)n ]- (n=2, 3). In addition, the highly labile anionic HCN solvates were obtained from [PPN]X ([PPN]=μ-nitridobis(triphenylphosphonium), X=N3 , OCN, SCN and OCP) and HCN. Crystals of [PPN][X(HCN)3 ] (X=N3 , OCN) and [PPN][SCN(HCN)2 ] were obtained when the crystallization was carried out at low temperatures. Interestingly, reaction of [PPN]OCP with HCN was noticed, which led to the formation of [P(CN)2 ]- , crystallizing as HCN disolvate [PPN][P(CN⋅HCN)2 ]. Furthermore, we were able to isolate the novel cyanido(halido) silicate dianions of the type [SiCl0.78 (CN)5.22 ]2- and [SiF(CN)5 ]2- and the hexa-substituted [Si(CN)6 ]2- by temperature controlled halide/cyanide exchange reactions. By facile neutralization reactions with the non-innocent cation of [Et3 HN]2 [Si(CN)6 ] with MOH (M=Li, K), Li2 [Si(CN)6 ] ⋅ 2 H2 O and K2 [Si(CN)6 ] were obtained, which form three dimensional coordination polymers. From salt metathesis processes of M2 [Si(CN)6 ] with different imidazolium bromides, we were able to isolate new imidazolium salts and the ionic liquid [BMIm]2 [Si(CN)6 ]. When reacting [Mes(nBu)Im]2 [Si(CN)6 ] with an excess of the strong Lewis acid B(C6 F5 )3 , the voluminous adduct anion {Si[CN⋅B(C6 F5 )3 ]6 }2- was obtained.

A 10 minute approach for the phase specific synthesis of Se nanoparticles with tunable morphology: their anticancer efficacy and the role of an ionic liquid

The current work demonstrates a rapid and highly facile controlled phase-specific synthesis of Se nanoparticles, their anticancer efficacy and the 3-in-1 role of a RTIL.

Controlling the phase and morphology of amorphous Se nanoparticles: their prolonged stabilization and anticancer efficacy

Resolving issues related to the synthesis and stabilization of amorphous selenium nanoparticles: recycling of a matrix and promising biological applications.

In-Situ XPS Monitoring and Characterization of Electrochemically Prepared Au Nanoparticles in an Ionic Liquid

Gold nanoparticles (Au NPs) have been electrochemically prepared in situ and in vacuo using two different electrochemical device configurations, containing an ionic liquid (IL), N-N-diethyl-N-methyl-N-(2-methoxyethyl)ammonium bis(trifluoromethanesulfonyl)imide, that serves both as reaction and as stabilizing media for the NPs. It was observed in both devices that Au NPs were created using an anodically triggered route. The created Au NPs are relatively small (3-7 nm) and reside within the IL medium. X-ray photoelectron spectroscopy is utilized to follow not only the formation of the NPs but also their charging/discharging properties, by monitoring the charging shifts of the Au4f peak representing the electrodes and also the Au NPs as well as the F1s peak of the IL after polarizing one of the electrodes. Accordingly, DC polarization across the electrodes leads to a uniform binding energy shift of F1s of the IL along with that of Au4f of the NPs within. Moreover, this shift corresponds to only half of the applied potential. AC polarization brings out another dimension for demonstrating further the harmony between the charging/discharging property of the IL medium and the Au NPs in temporally and laterally resolved fashions. Polarization of the electrodes result in perfect spectral separation of the Au4f peaks of the NPs from those of the metal in both static (DC) and in time- and position-dependent (AC) modes.

Synthesis and properties enhancement of metal nanoclusters templated on a biological molecule/ionic liquids complex

Two biological template molecules and two short-chain imidazolium ionic liquids with amphipathy were selected to synthesize four different types of metal nanoclusters, which were templated on a biological molecule/imidazolium ionic liquids complex.

Ionic liquids for nano- and microstructures preparation. Part 1: Properties and multifunctional role

Ionic liquids (ILs) are a broad group of organic salts of varying structure and properties, used in energy conversion and storage, chemical analysis, separation processes, as well as in the preparation of particles in nano- and microscale. In material engineering, ionic liquids are applied to synthesize mainly metal nanoparticles and 3D semiconductor microparticles. They could generally serve as a structuring agent or as a reaction medium (solvent). This review deals with the resent progress in general understanding of the ILs role in particle growth and stabilization and the application of ionic liquids for nano- and microparticles synthesis. The first part of the paper is focused on the interactions between ionic liquids and growing particles. The stabilization of growing particles by steric hindrance, electrostatic interaction, solvation forces, viscous stabilization, and ability of ILs to serve as a soft template is detailed discussed. For the first time, the miscellaneous role of the ILs in nano- and microparticle preparation composed of metals as well as semiconductors is collected, and the formation mechanisms are graphically presented and discussed based on their structure and selected properties. The second part of the paper gives a comprehensive overview of recent experimental studies dealing with the applications of ionic liquids for preparation of metal and semiconductor-based nano- and microparticles. A wide spectrum of preparation routes using ionic liquids are presented, including precipitation, sol-gel technique, hydrothermal method, nanocasting, and microwave or ultrasound-mediated methods.

Application of ionic liquid to polymorphic transformation of anti-viral/HIV drug adefovir dipivoxil

Ionic liquids (ILs) are defined as salts with a melting point below 100 °C. ILs have received increasing attention as new alternative to organic solvents because of their unique physicochemical properties. Therefore, this study was conducted in the purpose to present the efficacy of ILs as new solvents capable to control the Polymorphic transformation phenomenon. Here, the polymorphic transformation phenomenon of adefovir dipivoxil, an efficient antiviral active pharmaceutical ingredient on human immunodeficiency virus, was investigated. The phase transformation phenomenon from the metastable polymorph, new form (NF) to the stable polymorph, Form-X in 1-allyl-3-ethylimidazolium tetrafluoroborate (AEImBF4) and 1-butyl-2,3-dimethylimidazolium tetrafluoroborate (BDMImBF4) ILs solutions was observed utilizing the solvent-mediated phase transformation method The thermodynamic factors, AEImBF4/BDMImBF4 solvent composition ratio of 3:7-6:4 and the temperature in range of 25-100 °C, as well as the dynamic factor, the rational speed in range of 300-1000 rpm were parameters studied in this experiment. The thermodynamic and dynamic equations involving nucleation and mass transfer were applied for the quantitative analysis. The result of the present study confirmed the use of ILs as substitute solvent for volatile organic solvents, and demonstrated the efficacy of ILs as potential solvent-media to control the polymorphic transformation.

Ionic liquids for nano- and microstructures preparation. Part 2: Application in synthesis

Ionic liquids (ILs) are widely applied to prepare metal nanoparticles and 3D semiconductor microparticles. Generally, they serve as a structuring agent or reaction medium (solvent), however it was also demonstrated that ILs can play a role of a co-solvent, metal precursor, reducing as well as surface modifying agent. The crucial role and possible types of interactions between ILs and growing particles have been presented in the Part 1 of this review paper. Part 2 of the paper gives a comprehensive overview of recent experimental studies dealing with application of ionic liquids for preparation of metal and semiconductor based nano- and microparticles. A wide spectrum of preparation routes using ionic liquids is presented, including precipitation, sol-gel technique, hydrothermal method, nanocasting and ray-mediated methods (microwave, ultrasound, UV-radiation and γ-radiation). It was found that ionic liquids formed of a 1-butyl-3-methylimidazolium [BMIM] combined with tetrafluoroborate [BF4], hexafluorophosphate [PF6], and bis(trifluoromethanesulfonyl)imide [Tf2N] are the most often used ILs in the synthesis of nano- and microparticles, due to their low melting temperature, low viscosity and good transportation properties. Nevertheless, examples of other IL classes with intrinsic nanoparticles stabilizing abilities such as phosphonium and ammonium derivatives are also presented. Experimental data revealed that structure of ILs (both anion and cation type) affects the size and shape of formed metal particles, and in some cases may even determine possibility of particles formation. The nature of the metal precursor determines its affinity to polar or nonpolar domains of ionic liquid, and therefore, the size of the nanoparticles depends on the size of these regions. Ability of ionic liquids to form varied extended interactions with particle precursor as well as other compounds presented in the reaction media (water, organic solvents etc.) provides nano- and microstructures with different morphologies (0D nanoparticles, 1D nanowires, rods, 2D layers, sheets, and 3D features of molecules). ILs interact efficiently with microwave irradiation, thus even small amount of IL can be employed to increase the dielectric constant of nonpolar solvents used in the synthesis. Thus, combining the advantages of ionic liquids and ray-mediated methods resulted in the development of new ionic liquid-assisted synthesis routes. One of the recently proposed approaches of semiconductor particles preparation is based on the adsorption of semiconductor precursor molecules at the surface of micelles built of ionic liquid molecules playing a role of a soft template for growing microparticles.

Self-assembly of new surface active ionic liquids based on Aerosol-OT in aqueous media

New anionic ionic liquid surfactants have been synthesized by replacing the sodium cation of Aerosol-OT (sodium dioctylsulfosuccinate, [Na]AOT) with various biocompatible moieties, such as 1-butyl-3-methyl imidazolium ([C4mim]), proliniumisopropylester ([ProC3]), cholinium ([Cho]), and guanidinium ([Gua]). The Aerosol-OT derived ionic liquids (AOT-ILs) were found fairly soluble in water and formed vesicles above a critical vesicle concentration (CVC) which depended upon the nature of cation, and followed the order: [ProC3]<[C4mim]<[Gua]<[Cho]<Na(+). The self-assembly process was characterized using surface tension (ST), isothermal titration calorimetry (ITC), conductivity, dynamic light scattering (DLS), nuclear magnetic resonance (NMR) and transmission electron microscopy (TEM). Unlike other AOT-ILs, a structural transformation has been observed for [C4mim]AOT above CVC, because of certain amphiphilic character in the cation [C4mim]. Thermodynamic parameters calculated from ITC and conductivity techniques revealed that the vesicle formation process is entropy driven for [C4mim]AOT, whereas the process is both enthalpy and entropy driven for other AOT-ILs. In order to check the versatility of synthesized AOT-ILs we have tested their dissolution behavior in a different class of ionic liquids. All the AOT-ILs were found fairly soluble in the hydrophilic IL, ethanolammonium formate (EOAF), whereas only [C4mim]AOT and [ProC3]AOT were found soluble in hydrophobic IL, [C4mim]Tf2N. Such combinations can have potential for construction of stable colloidal formulations or microemulsions in ionic liquid media.

Aqueous-biamphiphilic ionic liquid systems: self-assembly and synthesis of gold nanocrystals/microplates

Biamphiphilic ionic liquids (BAILs) based on 1,3-dialkylimidazolium cation and alkyl sulfate anions ([C(n)H(2n+1)mim][C(m)H(2m+1)OSO(3)]; n = 4, 6, or 8; m = 8, 12) have been synthesized and characterized for their self-assembling behavior in the aqueous medium. Effects of alteration of alkyl chain length in cation and anion on surfactant properties of BAILs have been examined from surface tension measurements. The effectiveness of surface tension reduction for BAILs has been found to be exceptionally higher as compared to single chain surface active ILs/conventional surfactants. The thermodynamics of the aggregation process has been studied using isothermal titration calorimetry (ITC) and temperature dependent conductivity experiments. Dynamic light scattering (DLS), nuclear magnetic resonance (NMR), and transmission electron microscopy (TEM) studies showed that BAILs formed distinct aggregated structures depending upon the amphiphilic character present in the cation and anion. BAILs ([C(n)H(2n+1)mim][C(m)H(2m+1)OSO(3)]) form micelles when n = 4, 6; m = 8, intermicellar aggregates when n = 4, 6; m = 12, and vesicles when n = 8; m = 8, 12. Gold nanoparticles and microplates have been synthesized in micellar and vesicle solutions of BAILs using a simple photoreduction method. The studies show the potential of BAILs for constructing micelles and supramolecular assemblies, such as bilayer vesicles, which are effective in preparation of nanomaterials of controlled size and morphology.

Aqueous-mixed ionic liquid system: phase transitions and synthesis of gold nanocrystals

Micelle-vesicle-micelle (MVM) transitions are observed in the aqueous-mixed ionic liquid (1-butyl-3-methylimidazolium octyl sulfate and 3-methyl-1-octylimidazolium chloride) system. The surface activity of mixed ILs, phase behavior, and solution structures in the system have been thoroughly characterized using conductometry, tensiometry, fluorimetry, dynamic light scattering (DLS), viscometry, turbidity, atomic force microscopy (AFM), transmission electron microscopy (TEM), and (1)H NMR techniques. Synergetic interactions between the two ILs in monolayers at the air/water interface and in micelles/vesicles have been determined using the regular solution approach, and the origins of spontaneous vesicle formation in this novel system are discussed. Using a photoreduction method, the formation of stable gold nanoparticles (GNPs) and microscale nanosheets of different shapes and sizes in the micellar and vesicle solutions has been reported. The studies show the potential of a mixed IL system in constructing stable micelles/supramolecular assemblies, such as bilayer vesicles, which are effective in the preparation of the desired nanomaterials.

Imidazolium ionic liquids as promoters and stabilising agents for the preparation of metal(0) nanoparticles by reduction and decomposition of organometallic complexes

The organometallic complexes ([Ru(COD)(2-methylallyl)2] and [Ni(COD)2] (COD=1,5-cyclooctadiene) dissolved in imidazolium ionic liquids (ILs) undergo reduction and decomposition, respectively, to afford stable ruthenium and nickel metal(0) nanoparticles (Ru(0)-NPs and Ni(0)-NPs) in the absence of classical reducing agents. Depending on the case, the reduction/auto-decomposition is promoted by either the cation and/or anion of the neat imidazolium ILs.

New frontiers in materials science opened by ionic liquids

Ionic liquids (ILs) including ambient-temperature molten salts, which exist in the liquid state even at room temperature, have a long research history. However, their applications were once limited because ILs were considered as highly moisture-sensitive solvents that should be handled in a glove box. After the first synthesis of moisture-stable ILs in 1992, their unique physicochemical properties became known in all scientific fields. ILs are composed solely of ions and exhibit several specific liquid-like properties, e.g., some ILs enable dissolution of insoluble bio-related materials and the use as tailor-made lubricants in industrial applications under extreme physicochemical conditions. Hybridization of ILs and other materials provides quasi-solid materials, which can be used to fabricate highly functional devices. ILs are also used as reaction media for electrochemical and chemical synthesis of nanomaterials. In addition, the negligible vapor pressure of ILs allows the fabrication of electrochemical devices that are operated under ambient conditions, and many liquid-vacuum technologies, such as X-ray photoelectron spectroscopy (XPS) analysis of liquids, electron microscopy of liquids, and sputtering and physical vapor deposition onto liquids. In this article, we review recent studies on ILs that are employed as functional advanced materials, advanced mediums for materials production, and components for preparing highly functional materials.