Polymers for Green C–C Couplings

Prospects and Applications of Palladium Nanoparticles in the Cross-coupling of (hetero)aryl Halides and Related Analogues

Discovering efficient methods for the formation of carbon-carbon bonds is a central ongoing theme in organic synthesis. Cross-coupling reactions catalysed by metal nanoparticles are attractive alternatives to the traditional use of metal counterparts due to the catalytic tunability, selectivity, recyclability and reusability of the nanoparticles. The ongoing search for sustainable processes demands that reusable and environmentally benign catalysts are used. While the advantages of nanoparticles catalysts over bulk catalysts cannot be overemphasised, the problem of sintering, agglomeration and leaching are drawbacks to their full industrial applications. Hence, efforts are being made towards advancing the efficiency of the catalytic nanoparticle systems over the years. This review presents the progress, the challenges and the prospects of palladium nanoparticle with focus on Heck, Suzuki, Hiyama and Sonogashira cross-coupling reactions involving (hetero) aryl halides and the analogues.

Application of Green Solvents: PEG and scCO2 in the Mono- or Biphasic Catalytic Systems for the Repetitive Batch Coupling of Vinylsilanes with Vinyl Boronates toward 1-Boryl-1-silylethenes

A new method for the repetitive batch silylative coupling (trans-silylation) of vinylsilanes with vinyl boronates in the presence of Ru(CO)Cl(H)(PCy3)2 immobilized in poly(ethylene glycols) (PEGs) has been developed. Three PEGs (PEG600, PEG2000, and MPEG2000) with different molecular weights and end groups (MW = 600-2000) were tested as solvents and immobilization media, while an aliphatic solvent (n-hexane or n-heptane) or supercritical CO2 was used for product extraction. By applying 2 mol % of the Ru-H catalyst, it was possible to carry out up to 15 complete runs, with the predominant formation of 1-boryl-1-silylethenes. This immobilization strategy permitted for catalyst reuse and obtaining higher TON values (approximately 660-734) compared to the reaction in conventional solvents (∼50). Detailed kinetic studies of the most effective catalytic system were performed to determine catalyst activity and stability. Moreover, the reactions were carried out in an MPEG2000/scCO2 biphasic system, positively influencing the process sustainability.

A New Dinuclear Cobalt Complex for Copolymerization of CO2 and Propylene Oxide: High Activity and Selectivity

Based on the ligand H₄Salen-8^tBu (salen-4), a new dinuclear cobalt complex (salen-4)[Co(III)TFA]₂ (salen-4 = 3,5-di-tert-butylsalicylaldehyde-3,3′-diaminobiphenylamine; TFA = trifluoroacetic acid) has been firstly synthesized and characterized. It shows high catalytic activity for the copolymerization of propylene oxide (PO) and carbon dioxide (CO₂), yielding regioregular poly(propylene carbonate) (PPC) with little generation of propylene carbonate (PC) by-product. It has been found that (salen-4)[Co(III)TFA]₂ shows higher activity at milder conditions, generating a polymer with maximum Mn of 293 kg/mol and a narrow molecular weight distribution PDI of 1.35. The influences of reaction time, CO₂ pressure, reaction temperature, nature of the cocatalyst, catalyst dosage and substrate concentration on the molecular weight, yield and selectivity of the polymer were explored in detail. The results showed that the (salen-4)[Co(III)TFA]₂/[PPN]TFA catalyst system demonstrated a remarkable TOF as high as 735 h^–1. In addition, a hypothetical catalytic reaction mechanism was proposed based on density functional theory (DFT) calculations and the catalytic reaction results of the (salen-4)[Co(III)TFA]₂.

An Efficient Electrochromic Supercapacitor Based on Solution-Processable Nanoporous Poly{tris[4-(3,4-ethylenedioxythiophene)phenyl]amine}

A new green synthetic route to tris[4-(3,4-ethylenedioxythiophene)phenyl]amine (TEPA) monomer has been developed and the molecular structure of TEPA has been determined by using single-crystal XRD. Solution-processable nanoporous poly{tris[4-(3,4-ethylenedioxythiophene)phenyl]amine} (PTEPA) is prepared by a chemical oxidative polymerization in a microemulsion. Based on the distorted structure of TEPA in the solid state, it is proposed that dendritic PTEPA has a distorted 3 D conformation with multiple twisted channels and pores that are narrowed and blocked by bifurcation and distortion of PTEPA, which is consistent with the observed hierarchical pore structure. As a cathode material, PTEPA exhibits a discharge capacity of 89.5 mAh g-1 in the initial cycle with a highly sloping two-stage discharge curve and relatively stable cycling performance. Beyond its excellent energy storage properties, PTEPA also shows relatively good electrochromic performance. Furthermore, an efficient all-solid-state electrochromic supercapacitor (ECSC) with good electrochromic performance and high energy storage capacity (13.3 mF cm-2 ) is assembled from PTEPA and nanoporous graphene films. During charge-discharge processes, the color of the ECSC changes between yellow-green and steel blue. Thus, the energy storage level of the ECSC can be monitored by the corresponding color changes. The fabricated ECSC may have practical applications, for example, in self-powered electrochromic smart windows.

Heterogeneous palladium SALOPHEN onto porous polymeric microspheres as catalysts for heck reaction

Catalysts based on porous polymeric microspheres were prepared from N,N′-Bis(3,3′-allyl-salicylidene)-o-phenylenediamine Pd(II) (PdAS) metallo-monomer, styrene (STY), and divinylbenzene (DVB) as co-monomers. The effects of the STY/PdAS mass ratio of co-monomers were investigated to synthesize the optimal catalyst. All the prepared materials were characterized by scanning electron microscopy (SEM), N2 adsorption-desorption isotherms, inductively coupled plasma optical emission spectroscopy (ICP-OES), thermogravimetric analysis (TGA), solid-state diffuse-reflectance UV Vis (DRS UV-Vis) spectrometry, and X-ray photoelectron spectroscopy (XPS). Increasing the PdAS content from 1 to 5 wt%, based on the mass feed of monomers, produced well-defined spherical polymer resins with particle diameters of ~200 μm and high surface areas (>500 m2/g). XPS spectra shown a unique Pd2+ signal associated with the PdAS complex immobilized on a porous resin matrix. The catalytic performances of porous polymer microspheres were evaluated for Heck reaction between iodobenzene and methyl acrylate to produce methyl cinnamate, giving up to 100 % selectivity for the trans-isomer. The resin with 5 wt% PdAS showed the best catalytic activity in methyl cinnamate synthesis. Finally, the best catalytic system was evaluated in octinoxate production producing the target product with the same levels of conversion and selectivity for trans-isomer as was detected for methyl cinnamate synthesis.

Recent Advances Utilized in the Recycling of Homogeneous Catalysis

Homogeneous catalysts often show high activity and selectivity towards the various chemical transformations. Most of the transition metal-based active catalysts are expensive, rare, and have strict regulations for their use in pharmaceutical products. Hence, there is a requirement to develop suitable technologies for the practical separation and recycling of metal complex catalysts along with the sustainability of the process. This review focuses on the recent techniques used for the catalyst separation, their recovery, and recyclability of the homogeneous form of catalysts based on their economic compatibility and industrial applications. Various homogeneous catalysts have been reviewed on the basis of their support or media, active centres and recyclability aspects of the catalysts. This review gives brief insights into the varied examples of different recycling techniques utilized in the past 6-7 years.

Recent advances in transition metal-catalysed cross-coupling of (hetero)aryl halides and analogues under ligand-free conditions

The formation of new bonds is pivotal in organic chemistry and a prerequisite to life because it allows the construction of complex molecules from simple precursors.

Development and Application of a Recyclable High-Load Magnetic Co/C Hybrid ROMP-Derived Benzenesulfonyl Chloride Reagent and Utility of Corresponding Analogues

The development and application of high-load, recyclable magnetic Co/C hybrid ROMP-derived benzenesulfonyl chloride and analogues is reported. The regeneration and utility of these reagents in the methylation/alkylation of various carboxylic acids is demonstrated via efficient retrieval of the magnetic reagent with a neodymium magnet. Additional reactions employing the analogue sulfonic acid and in situ generated magnetic benzenesulfonyl azide are also reported.

Resin-Immobilized Palladium Nanoparticle Catalysts for Organic Reactions in Aqueous Media: Morphological Aspects

An insight into the nano- and micro-structural morphology of a polymer supported Pd catalyst employed in different catalytic reactions under green conditions is reported. The pre-catalyst was obtained by copolymerization of the metal-containing monomer Pd(AAEMA)₂ [AAEMA⁻ = deprotonated form of 2-(acetoacetoxy) ethyl methacrylate] with ethyl methacrylate as co-monomer, and ethylene glycol dimethacrylate as cross-linker. This material was used in water for the Suzuki-Miyaura cross-coupling of aryl bromides, and for the reduction of nitroarenes and quinolines using NaBH₄ or H₂, as reductants. TEM analyses showed that in all cases the pristine Pd(II) species were reduced in situ to Pd(0), which formed metal nanoparticles (NPs, the real active species). The dependence of their average size (2–10 nm) and morphology on different parameters (temperature, reducing agent, presence of a phase transfer agent) is discussed. TEM and micro-IR analyses showed that the polymeric support retained its porosity and stability for several catalytic cycles in all reactions and Pd NPs did not aggregate after reuse. The metal nanoparticle distribution throughout the polymer matrix after several recycles provided precious information about the catalytic mechanism, which was truly heterogeneous in the hydrogenation reactions and of the so-called “release and catch” type in the Suzuki coupling.

Poly(ω-bromoalkylnorbornenes-co-norbornene) by ROMP-hydrogenation: a robust support amenable to post-polymerization functionalization

The new polymers described have a saturated backbone and a bromo-substituent as the entry point to other functional groups of choice.

Palladium(II)-catalyzed Heck reaction of aryl halides and arylboronic acids with olefins under mild conditions

A series of general and selective Pd(II)-catalyzed Heck reactions were investigated under mild reaction conditions. The first protocol has been developed employing an imidazole-based secondary phosphine oxide (SPO) ligated palladium complex (6) as a precatalyst. The catalytic coupling of aryl halides and olefins led to the formation of the corresponding coupled products in excellent yields. A variety of substrates, both electron-rich and electron-poor olefins, were converted smoothly to the targeted products in high yields. Compared with the existing approaches employing SPO-Pd complexes in a Heck reaction, the current strategy features mild reaction conditions and broad substrate scope. Furthermore, we described the coupling of arylboronic acids with olefins, which were catalyzed by Pd(OAc)2 and employed N-bromosuccinimide as an additive under ambient conditions. The resulted biaryls have been obtained in moderate to good yields.