Self-Assembly of ZnO Nanoparticles - An NMR Spectroscopic Study

Investigation of Adsorption Behavior of Anticancer Drug on Zinc Oxide Nanoparticles: A Solid State NMR and Cyclic Voltammetry (CV) Analysis

The present study aims to comprehend the adsorption behavior of a set of anticancer drugs namely 5-fluorouracil (5-FU), doxorubicin and daunorubicin on ZnO nanoparticles (ZnO NPs) proposed as drug delivery systems employing solid state (ss) NMR, FTIR and Cyclic Voltammetry (CV) analysis. FTIR and ¹H MAS ssNMR data recorded for bare ZnO nanoparticle confirmed the presence of adsorbed -OH groups on the surface. ¹³C CP-MAS NMR spectra recorded for free and ZnO surface adsorbed drug samples exhibited considerable line broadening and chemical shift changes that complemented our earlier report on UV-DRS and XRD data of surface adsorption in case of 5-FU. Moreover, a remarkable enhancement of ¹³C signal intensity in case of loaded 5-FU was observed. This clearly indicated rigid nature of the drug on the surface allowing efficient transfer of ¹H polarization from the hetero nitrogen of 5-FU to ZnO to form surface hydroxyl (-OH) groups and the same has been observed in the quantum chemical calculations. To further analyze the motional dynamics of the surface adsorbed 5-FU, longitudinal relaxation times (T₁) were quantified employing Torchia method that revealed significant enhancement of ¹³C relaxation rate of adsorbed 5-FU. The enhanced rate suggested an effective role of quadrupolar contribution from ⁶⁷Zn to the ¹³C relaxation mechanism of ZnO_5-FU. The heterogeneous rate constant (k_het), average free energy of activation (∆G^≠) and point of zero charge (PZC) measured for free and drug loaded ZnO NPs samples using CV further support the SS-NMR results.

Effect of nanoparticles on spontaneous Ouzo emulsification

Particles stabilize fluid interfaces. In particular, oil/water Pickering emulsions undergo limited coalescence, yielding droplets of smaller size as the amount of particles is increased. Herein, we studied the effect of hydrophobic nanoparticles (<10 nm, alkyl-coated) on submicronic droplets (ca 100 nm) formed in an Ouzo system. We investigated thoroughly the water/tetrahydrofuran (THF)/butylated hydroxytoluene (BHT) reference diagram, in the absence and in the presence of nanoparticles, using the Nanoparticle Tracking Analysis (NTA) technique. This allowed us to characterize the size distributions in a much finer way than what is usually obtained using conventional Dynamic Light Scattering (DLS). Both a Surfactant-Free Microemulsion (SFME, thermodynamically stable) and an Ouzo (metastable spontaneous emulsion) domains were identified and the transition from one to the other could be characterized by specific features of the droplet size distributions. We found that the presence of the nanoparticles limits coalescence in the metastable domain. We also show that the alkyl-coated nanoparticles are irreversibly attached to the liquid-liquid interface.

Disclosing Interfaces of ZnO Nanocrystals Using Dynamic Nuclear Polarization: Sol-Gel versus Organometallic Approach

The unambiguous characterization of the coordination chemistry of nanocrystal surfaces produced by wet-chemical synthesis presently remains highly challenging. Here, zinc oxide nanocrystals (ZnO NCs) coated by monoanionic diphenyl phosphate (DPP) ligands were derived by a sol-gel process and a one-pot self-supporting organometallic (OSSOM) procedure. Atomic-scale characterization through dynamic nuclear polarization (DNP-)enhanced solid-state NMR (ssNMR) spectroscopy has notably enabled resolving their vastly different surface-ligand interfaces. For the OSSOM-derived NCs, DPP moieties form stable and strongly-anchored μ₂ - and μ₃ -bridging-ligand pairs that are resistant to competitive ligand exchange. The sol-gel-derived NCs contain a wide variety of coordination modes of DPP ligands and a ligand exchange process takes place between DPP and glycerol molecules. This highlights the power of DNP-enhanced ssNMR for detailed NC surface analysis and of the OSSOM approach for the preparation of ZnO NCs.

Luminescent zinc oxide nanoparticles: from stabilization to slow digestion depending on the nature of polymer coating

PEG-b-PAA and PEG-b-PVPA copolymers stabilize luminescent ZnO NPs in THF and enable their transfer to water.

Characterization techniques for nanoparticles: comparison and complementarity upon studying nanoparticle properties

Nanostructures have attracted huge interest as a rapidly growing class of materials for many applications. Several techniques have been used to characterize the size, crystal structure, elemental composition and a variety of other physical properties of nanoparticles. In several cases, there are physical properties that can be evaluated by more than one technique. Different strengths and limitations of each technique complicate the choice of the most suitable method, while often a combinatorial characterization approach is needed. In addition, given that the significance of nanoparticles in basic research and applications is constantly increasing, it is necessary that researchers from separate fields overcome the challenges in the reproducible and reliable characterization of nanomaterials, after their synthesis and further process (e.g. annealing) stages. The principal objective of this review is to summarize the present knowledge on the use, advances, advantages and weaknesses of a large number of experimental techniques that are available for the characterization of nanoparticles. Different characterization techniques are classified according to the concept/group of the technique used, the information they can provide, or the materials that they are destined for. We describe the main characteristics of the techniques and their operation principles and we give various examples of their use, presenting them in a comparative mode, when possible, in relation to the property studied in each case.

Air-Stable Anisotropic Monocrystalline Nickel Nanowires Characterized Using Electron Holography

Nickel is capable of discharging electric and magnetic shocks in aerospace materials thanks to its conductivity and magnetism. Nickel nanowires are especially desirable for such an application as electronic percolation can be achieved without significantly increasing the weight of the composite material. In this work, single-crystal nickel nanowires possessing a homogeneous magnetic field are produced via a metal-organic precursor decomposition synthesis in solution. The nickel wires are 20 nm in width and 1-2 μm in length. The high anisotropy is attained through a combination of preferential crystal growth in the ⟨100⟩ direction and surfactant templating using hexadecylamine and stearic acid. The organic template ligands protect the nickel from oxidation, even after months of exposure to ambient conditions. These materials were studied using electron holography to characterize their magnetic properties. These thin nanowires display homogeneous ferromagnetism with a magnetic saturation (517 ± 80 emu cm^-3), which is nearly equivalent to that of bulk nickel (557 emu cm^-3). Nickel nanowires were incorporated into carbon composite test pieces and were shown to dramatically improve the electric discharge properties of the composite material.

Synthesis and characterization of silver nanoparticles from (bis)alkylamine silver carboxylate precursors

A comparative study of amine and silver carboxylate adducts [R₁COOAg-2(R₂NH₂)] (R₁ = 1, 7, 11; R₂ = 8, 12) as a key intermediate in NPs synthesis is carried out via differential scanning calorimetry, solid-state FT-infrared spectroscopy, ¹³C CP MAS NMR, powder X-ray diffraction and X-ray photoelectron spectroscopy, and various solution NMR spectroscopies (¹H and ¹³C NMR, pulsed field gradient spin-echo NMR, and ROESY). It is proposed that carboxyl moieties in the presence of amine ligands are bound to silver ions via chelating bidentate type of coordination as opposed to bridging bidentate coordination of pure silver carboxylates resulting from the formation of dimeric units. All complexes are packed as lamellar bilayer structures. Silver carboxylate/amine complexes show one first-order melting transition. The evidence presented in this study shows that phase behavior of monovalent metal carboxylates are controlled, mainly, by head group bonding. In solution, insoluble silver salt is stabilized by amine molecules which exist in dynamic equilibrium. Using (bis)amine-silver carboxylate complex as precursor, silver nanoparticles were fabricated. During high-temperature thermolysis, the (bis)amine-carboxylate adduct decomposes to produce silver nanoparticles of small size. NPs are stabilized by strongly interacting carboxylate and trace amounts of amine derived from the silver precursor interacting with carboxylic acid. A corresponding aliphatic amide obtained from silver precursor at high-temperature reaction conditions is not taking part in the stabilization. Combining NMR techniques with FTIR, it was possible to follow an original stabilization mechanism. Graphical abstractThe synthesis of a series (bis)alkylamine silver(I) carboxylate complexes in nonpolar solvents were carried out and fully characterized both in the solid and solution. Carboxyl moieties in the presence of amine ligands are bound to silver ions via chelating bidentate type of coordination. The complexes form layered structures which thermally decompose forming nanoparticles stabilized only by aliphatic carboxylates.

A transparent flexible z-axis sensitive multi-touch panel based on colloidal ITO nanocrystals

Bottom-up fabrication of a flexible multi-touch panel prototype based on transparent colloidal indium tin oxide (ITO) nanocrystal (NC) films is presented. A series of 7% Sn(4+) doped ITO NCs protected by oleate, octanoate and butanoate ligands are synthesized and characterized by a battery of techniques including, high resolution transmission electron microscopy, X-ray diffraction, (1)H, (13)C and (119)Sn nuclear magnetic resonance spectroscopy, and the related diffusion ordered spectroscopy. Electrical resistivities of transparent films of these NCs assembled on flexible polyethylene terephthalate substrates by convective self-assembly from their suspension in toluene decrease with the ligand length, from 220 × 10(3) for oleate ITO to 13 × 10(3)Ω cm for butanoate ITO NC films. A highly transparent, flexible touch panel based on a matrix of strain gauges derived from the least resistive film of 17 nm butanoate ITO NCs sensitively detects the lateral position (x, y) of the touch as well as its intensity over the z-axis. Being compatible with a stylus or bare/gloved finger, a larger version of this module may be readily implemented in upcoming flexible screens, enabling navigation capabilities over all three axes, a feature highly desired by the display industry.

Photocontrol of luminescent inorganic nanocrystals via an organic molecular switch

The photoluminescence of ZnO nanocrystals is reversibly modulated via a diarylethene photoswitch, and the photophysics mechanism was unraveled.

Metallic-like stoichiometric copper sulfide nanocrystals: phase- and shape-selective synthesis, near-infrared surface plasmon resonance properties, and their modeling

In the realm of semiconductor nanomaterials, a crystal lattice heavily doped with cation/anion vacancies or ionized atomic impurities is considered to be a general prerequisite to accommodating excess free carriers that can support localized surface plasmon resonance (LSPR). Here, we demonstrate a surfactant-assisted nonaqueous route to anisotropic copper sulfide nanocrystals, selectively trapped in the covellite phase, which can exhibit intense, size-tunable LSPR at near-infrared wavelengths despite their stoichiometric, undoped structure. Experimental extinction spectra are satisfactorily reproduced by theoretical calculations performed by the discrete dipole approximation method within the framework of the Drude-Sommerfeld model. The LSPR response of the nanocrystals and its geometry dependence are interpreted as arising from the inherent metallic-like character of covellite, allowed by a significant density of lattice-constitutional valence-band free holes. As a consequence of the unique electronic properties of the nanocrystals and of their monodispersity, coherent excitation of symmetric radial breathing modes is observed for the first time in transient absorption experiments at LSPR wavelengths.

Microfluidic-induced growth and shape-up of three-dimensional extended arrays of densely packed nanoparticles

We use evaporation within a microfluidic device to extract the solvent of a (possibly very dilute) dispersion of nanoparticles and concentrate the dispersion until a solid made of densely packed nanoparticles grows and totally invades the microfluidic geometry. The growth process can be rationalized as an interplay between evaporation-induced flow and kinetic and thermodynamic coefficients which are system-dependent; this yields limitations to the growth process illustrated here on two main cases: evaporation- and transport-limited growth. Importantly, we also quantify how colloidal stability may hinder the growth and show that care must be taken as to the composition of the initial dispersion, especially regarding traces of ionic species that can destabilize the suspension upon concentration. We define a stability chart, which, when fulfilled, permits us to grow and shape-up solids, including superlattices and extended and thick arrays of nanoparticles made of unary and binary dispersions, composites, and heterojunctions between distinct types of nanoparticles. In all cases, the geometry of the final solid is imparted by that of the microfluidic device.