Synthesis of CuO and Cu3N Nanoparticles in and on Hollow Silica Spheres

Facile synthesis of Cu-based catalysts from Cu3Si and their catalysis properties study

Supported copper species are well-known for their remarkable catalytic properties across numerous reactions. However, the current preparation methods pose challenges for large-scale production. In this study, we present a cost-effective method for the facile preparation of a series of copper-silicon composites using Cu3Si@Si particles as precursors. We evaluate the catalytic properties of these composites in the conversion of 4-nitrophenol to 4-amionphenol. Notably, the Cu@SiOx/Si composite exhibits exceptional catalytic performance, attributed to the synergy effect between Cu and Si, and the formation of a metastable Si-H2 complex that enhances the reaction kinetics. This research introduces a novel approach for creating efficient and stable catalysts for hydrogenation reactions.

Surveying the Synthesis, Optical Properties and Photocatalytic Activity of Cu3N Nanomaterials

This review addresses the most recent advances in the synthesis approaches, fundamental properties and photocatalytic activity of Cu₃N nanostructures. Herein, the effect of synthesis conditions, such as solvent, temperature, time and precursor on the precipitation of Cu₃N and the formation of secondary phases of Cu and Cu₂O are surveyed, with emphasis on shape and size control. Furthermore, Cu₃N nanostructures possess excellent optical properties, including a narrow bandgap in the range of 0.2 eV–2 eV for visible light absorption. In that regard, understanding the effect of the electronic structure on the bandgap and on the optical properties of Cu₃N is therefore of interest. In fact, the density of states in the d-band of Cu has an influence on the band gap of Cu₃N. Moreover, the potential of Cu₃N nanomaterials for photocatalytic dye-degradation originates from the presence of active sites, i.e., Cu and N vacancies on the surface of the nanoparticles. Plasmonic nanoparticles tend to enhance the efficiency of photocatalytic dye degradation of Cu₃N. Nevertheless, combining them with other potent photocatalysts, such as TiO₂ and MoS_2, augments the efficiency to 99%. Finally, the review concludes with perspectives and future research opportunities for Cu₃N-based nanostructures.

Solution/Ammonolysis Syntheses of Unsupported and Silica-Supported Copper(I) Nitride Nanostructures from Oxidic Precursors

Herein we describe an alternative strategy to achieve the preparation of nanoscale Cu3N. Copper(II) oxide/hydroxide nanopowder precursors were successfully fabricated by solution methods. Ammonolysis of the oxidic precursors can be achieved essentially pseudomorphically to produce either unsupported or supported nanoparticles of the nitride. Hence, Cu3N particles with diverse morphologies were synthesized from oxygen-containing precursors in two-step processes combining solvothermal and solid-gas ammonolysis stages. The single-phase hydroxochloride precursor, Cu2(OH)3Cl was prepared by solution-state synthesis from CuCl2·2H2O and urea, crystallising with the atacamite structure. Alternative precursors, CuO and Cu(OH)2, were obtained after subsequent treatment of Cu2(OH)3Cl with NaOH solution. Cu3N, in the form of micro- and nanorods, was the sole product formed from ammonolysis using either CuO or Cu(OH)2. Conversely, the ammonolysis of dicopper trihydroxide chloride resulted in two-phase mixtures of Cu3N and the monoamine, Cu(NH3)Cl under similar experimental conditions. Importantly, this pathway is applicable to afford composite materials by incorporating substrates or matrices that are resistant to ammoniation at relatively low temperatures (ca. 300 °C). We present preliminary evidence that Cu3N/SiO2 nanocomposites (up to ca. 5 wt.% Cu3N supported on SiO2) could be prepared from CuCl2·2H2O and urea starting materials following similar reaction steps. Evidence suggests that in this case Cu3N nanoparticles are confined within the porous SiO2 matrix.

Photocatalytic Properties of Copper Nitride/Molybdenum Disulfide Composite Films Prepared by Magnetron Sputtering

Cu3N/MoS2 composite films were prepared by magnetron sputtering under different preparation parameter, and their photocatalytic properties were investigated. Results showed that the composite films surface was uniform and had no evident cracks. When the sputtering power of MoS2 increased from 2 W to 8 W, the photocatalytic performance of the composite films showed a trend of increasing first and then decreasing. Among these films, the composite films with MoS2 sputtering power of 4 W showed the best photocatalytic degradation performance. The photocatalytic degradation rate of methyl orange at 30 min was 98.3%, because the MoS2 crystal in the films preferentially grew over the Cu3N crystal, thereby affecting the growth of the Cu3N crystal. The crystallinity of the copper nitride also increased. During photocatalytic degradation, the proper amount of MoS2 reduced the band gap of Cu3N, and the photogenerated electron hole pairs were easily separated. Thus, the films produces additional photogenerated electrons and promotes the degradation reaction of the composite films on methyl orange solution.

Pyridine-based low-temperature synthesis of CoN, Ni3N and Cu3N nanoparticles

CoN, Ni₃N and Cu₃N nanoparticles were prepared via low-temperature, oxygen-free liquid-phase synthesis in refluxing pyridine. This approach, leading to high-purity, narrow-size (3–5 nm) nitrides, can be generally very promising for obtaining nanosized nitrides and to address their material properties.

Large-Scale Silica Overcoating of Gold Nanorods with Tunable Shell Thicknesses

Gold nanorods (GNRs) overcoated with SiO2 are of interest for enhancing the shape stability of GNRs during photo-thermal heating, for further functionalization with silanes, and for biomedical applications. While methods have recently been developed for synthesizing GNRs on a large scale, SiO2 overcoating of GNRs is still conducted on a small reaction scale. Here, we report a method for large-scale synthesis of SiO2-overcoated GNRs (SiO2-GNRs), which gives ~190 mg of SiO2-GNRs. SiO2 is deposited onto and encapsulates the cetyltrimethylammonium bromide (CTAB) coatings that stabilize GNRs by adding tetraethoxysilane (TEOS) via syringe pump. Control over the CTAB concentration is critically important for obtaining uniform overcoatings. Optical absorbance spectra of SiO2-GNRs closely resemble uncoated GNRs, which indicates overcoating of single rather than multiple GNRs and confirms that they remain well dispersed. By adjusting the reaction conditions, shells as thick as ~20 nm can be obtained. For thin shells (< 10 nm), addition of poly(ethylene glycol) silane (PEG-silane) at different times during the overcoating reaction allows facile control over the shell thickness, giving shells as thin as ~2 nm. The bulky PEG chain terminates further crosslinking and deposition of SiO2.