Evaluation of the anticancer activities with various ligand substituents in Co(II/III)-picolyl phenolate derivatives: synthesis, characterization, DFT, DNA cleavage, and molecular docking studies

The reactions between 2-(pyridine-2-ylmethoxy)-benzaldehyde (L) and various primary amines furnish tridentate (L1 to L3) and tetradentate (L4) chelating ligands. The choice of different primary amines in the condensation reaction incorporates the chiral carbon atom in L2 and L3. A series of mononuclear cobalt(II) complexes, [CoII(L1)(Cl)2] (1), [CoII(L2)(Cl)2]·CH3CN (2), [CoII(L3)(Cl)2] (3), and [CoIII(L4)(N3)2] (4) are synthesized in the pure crystalline state from the resulting solution of cobalt(II) chloride and/or azide and respective ligand. The new ligands and cobalt complexes are characterized using spectral (UV-Vis, 1H-NMR, IR, and HRMS), cyclovoltammetric, and DFT studies. The structure of L1, L2, and all four cobalt complexes are determined by single X-ray crystallography. Cytotoxic activity of the compounds is evaluated using three different tissues of origin e.g., U-937 (histiocytic lymphoma), HEK293T (embryonic kidney), and A549 (lung carcinoma). The cobalt complexes are more active than the corresponding ligands against U-937 and HEK293T. The MTT assay demonstrates that the cobalt compounds are more effective anticancer agents against U-937 cancer cells than HEK293T and A549. The toxicity order, 1 (7.2 ± 0.3 μM) > 3 (11.4 ± 0.6 μM) > 2 (12 ± 0.1 μM) > 4 (29 ± 1 μM) is observed against U-937 cancer cells. All the compounds induce cell death through an apoptosis mechanism and all are ineffective against PBMCs. The mechanism of activity against U937 cancer cells involves caspase-3 activation and two different mitogen-activated protein kinases attesting the programmed cell death. Among the compounds, complexes 1, 2, and 3 show DNA cleavage activity both in oxidizing (H2O2) and reducing (GSH) environments. The mechanistic study reveals that singlet oxygen (1O2) is the major species involved in DNA cleavage. The absolute chemical hardness values of the ligands and 4 are relatively higher than 1, 2, and 3, which tacitly support the DNA cleavage experiment. The docking result indicates that the compounds under investigation strongly interact with DNA base pairs through a variety of interactions which attests successfully to the experimental results. A structure-activity relationship has been drawn to correlate the variation of antitumor activity with ligand conformations.

Rhodamine 6G-based efficient chemosensor for trivalent metal ions (Al3+, Cr3+ and Fe3+) upon single excitation with applications in combinational logic circuits and memory devices

A new rhodamine 6G-based chemosensor (L3) was synthesized and characterized by ¹H, ¹³C, IR and mass spectroscopy studies. It exhibited an excellent selective and sensitive CHEF-based recognition of trivalent metal ions M³⁺ (M = Fe, Al and Cr) over mono and di-valent and other trivalent metal ions with prominent enhancement in the absorption and fluorescence intensity for Fe³⁺ (669-fold), Al³⁺ (653-fold) and Cr³⁺ (667-fold) upon the addition of 2.6 equivalent of these metal ions in the probe in H₂O/CH₃CN (7 : 3, v/v, pH 7.2). The corresponding K_d values were evaluated to be 1.94 × 10^-5 (Fe³⁺), 3.15 × 10^-5 (Al³⁺) and 2.26 × 10^-5 M (Cr³⁺). The quantum yields of L3, [L3-Fe³⁺], [L3-Al³⁺] and [L3-Cr³⁺] complexes in H₂O/CH₃CN (7 : 3, v/v, pH 7.2) were found to be 0.0005, 0.335, 0.327 and 0.333, respectively, using rhodamine-6G as the standard. The LODs for Fe³⁺, Al³⁺ and Cr³⁺ were determined by 3σ methods and found to be 2.57, 0.78 and 0.47 μM, respectively. The cyanide ion snatched Fe³⁺ from the [Fe³⁺-L3] complex and quenched its fluorescence via its ring-closed spirolactam form. Advanced level molecular logic devices using different inputs (2 and 4 input) and a memory device were constructed.

Rhodamine-azobenzene based single molecular probe for multiple ions sensing: Cu2+, Al3+, Cr3+ and its imaging in human lymphocyte cells

A photoinduced electron transfer (PET) and chelation-enhanced fluorescence (CHEF) regulated rhodamine-azobenzene chemosensor (L) was synthesized for chemoselective detection of Al³⁺, Cr³⁺, and Cu²⁺ by UV-Visible absorption study whereas Al³⁺ and Cr³⁺ by fluorimetric study in EtOH-H₂O solvent. L showed a clear fluorescence emission enhancement of 21 and 16 fold upon addition of Al³⁺ and Cr³⁺ due to the 1:1 host-guest complexation, respectively. This is first report on rhodamine-azobenzene based Cr³⁺ chemosensor. The complex formation, restricted imine isomerization, inhibition of PET (photo-induced electron transfer) process with the concomitant opening of the spirolactam ring induced a turn-on fluorescence response. The higher binding constants 6.7 × 10³ M^-1 and 3.8 × 10³ M^-1 for Al³⁺ and Cr³⁺, respectively and lower detection limits 1 × 10^-6 M and 2 × 10^-6 M for Al³⁺ and Cr³⁺, respectively in a buffered solution with high reversible nature describes the potential of L as an effective tool for detecting Al³⁺ and Cr³⁺ in a biological system with higher intracellular resolution. Finally, L was used to map the intracellular concentration of Al³⁺ and Cr³⁺ in human lymphocyte cells (HLCs) at physiological pH very effectively. Altogether, our findings will pave the way for designing new chemosensors for multiple analytes and those chemosensors will be effective for cell imaging study.

A fluorescein-based chemosensor for “turn-on” detection of Hg2+ and the resultant complex as a fluorescent sensor for S2− in semi-aqueous medium with cell-imaging application: experimental and computational studies

A fluorescein hydrazone based probe selectively recognizes Hg²⁺ ion with live cell imaging application.

Acylhydrazone as a novel “Off–On–Off” fluorescence probe for the sequential detection of Al3+and F−

An acylhydrazone,SPBH,acts as a sequential fluorescence “Off–On–Off” probe for Al³⁺/F⁻, and the phenomenon was detectable by the naked eye.

A rhodamine-based turn-on nitric oxide sensor in aqueous medium with endogenous cell imaging: an unusual formation of nitrosohydroxylamine

The sensor L3 selectively recognizes NO in purely aqueous medium with an unusual formation of nitrosohydroxylamine with a turn-on fluorescence response which might be suitable for in vivo application.

A novel chemosensor based on rhodamine and azobenzene moieties for selective detection of Al3+ ions

Both rhodamine and azobenzene moieties have been conjugated to prepare a novel chemosensor for the detection of Al³⁺ through CHEF-PET and the spirolactam ring opening mechanism.

A rhodamine embedded bio-compatible smart molecule mimicking a combinatorial logic circuit and ‘key-pad lock’ memory device for defending against information risk

A rhodamine-based chemosensor LC with a colorimetric response towards Al³⁺ and Cu²⁺ and only a fluorescence response to Al³⁺ enables us to fabricate a ‘key-pad-logic’ function.

Morphology-directing synthesis of rhodamine-based fluorophore microstructures and application toward extra- and intracellular detection of Hg(2+)

A new, easily synthesizable rhodamine-based chemosensor with potential N2O2 donor atoms, L(3), has been characterized by single-crystal X-ray diffraction together with (1)H NMR and high-resolution mass spectrometry (HRMS) studies. L(3) was found to bind selectively and reversibly to the highly toxic Hg(2+) ion. The binding stoichiometry and formation constant of the sensor toward Hg(2+) were determined by various techniques, including UV-vis, fluorescence, and Job's studies, and substantiated by HRMS methods. None of the biologically relevant and toxic heavy metal ions interfered with the detection of Hg(2+) ion. The limit of detection of Hg(2+)calculated by the 3σ method was 1.62 nM. The biocompatibility of L(3) with respect to its good solubility in mixed organic/aqueous media (MeCN/H2O) and cell permeability with no or negligible cytotoxicity provides good opportunities for in vitro/in vivo cell imaging studies. As the probe is poorly soluble in pure water, an attempt was made to frame nano/microstructures in the absence and in the presence of sodium dodecyl sulfate (SDS) as a soft template, which was found to be very useful in synthesizing morphologically interesting L(3) microcrystals. In pure water, micro-organization of L(3) indeed occurred with block-shaped morphology very similar to that in the presence of SDS as a template. However, when we added Hg(2+) to the solution of L(3) under the above two conditions, the morphologies of the microstructures were slightly different; in the first case, a flowerlike structure was observed, and in second case, a simple well-defined spherical microstructure was obtained. Optical microscopy revealed a dotlike microstructure for L(3)-SDS assemblies, which changed to a panicle microstructure in the presence of Hg(2+). UV-vis absorption and steady-state and time-resolved fluorescence studies were also carried out in the absence and presence of Hg(2+), and also the SDS concentration was varied at fixed concentrations of the receptor and guest. The results revealed that the fluorescence intensity increased steadily with [SDS] until it became saturated at ∼7 mM SDS, indicating that the extent of perturbation to the emissive species increases with the increase in [SDS] until it becomes thermodynamically stable. There was also an increase in anisotropy with increasing SDS concentration, which clearly manifests the restriction of movement of the probe in the presence of SDS.

Optical sensor: a promising strategy for environmental and biomedical monitoring of ionic species

In this review, we cover the recent developments in fluorogenic and chromogenic sensors for Cu²⁺, Fe²⁺/Fe³⁺, Zn²⁺and Hg²⁺.

A FRET-based ‘off–on’ molecular switch: an effective design strategy for the selective detection of nanomolar Al3+ ions in aqueous media

A FRET-based ratiometric chemosensor (L1) is highly selective for Al³⁺ ions (as low as 6.19 × 10⁻⁹ M) and could be used to acquire images of Al³⁺ ions in living cells.