Homoleptic Copper(I), Silver(I), and Gold(I) Bisphosphine Complexes

[Ag(IPr)(bpy)][PF6]: brightness and darkness playing with aggregation induced phosphorescence for light-emitting electrochemical cells

Heteroleptic silver(I) complexes have recently started to attract attention in thin-film lighting technologies as an alternative to copper(I) analogues due to the lack of flattening distortion upon excitation. However, the interpretation of their photophysical behavior is challenging going from traditional fluorescence/phosphorescence to a temperature-dependent dual emission mechanism and ligand-lock assisted thermally activated delayed fluorescence. Herein, we unveil the photoluminescence behavior of a three-coordinated Ag(I) complex with the N-heterocyclic carbene (NHC) ligand and 2,2'-bipyridine (bpy) as the N^N ligand. In contrast to its low-emissive Cu(I) complex structural analogues, a strong greenish emission was attributed to the presence of aggregates formed by π-π intermolecular interactions as revealed by the X-ray structure and aggregation induced emission (AIE) studies in solution. In addition, the temperature-dependent time-resolved spectroscopic and computational studies demonstrated that the emission mechanism is related to a phosphorescence emission mechanism of two very close lying (ΔE = 0.08 eV) excited triplet states, exhibiting a similar delocalized nature over the bipyridine ligands. Unfortunately, this favourable AIE is lost upon forming homogeneous thin films suitable for lighting devices. Though the films showed very poor emission, the electrochemical stability under device operation conditions is remarkable compared to the prior-art, highlighting the potential of [Ag(NHC)(N^N)][X] complexes in thin-film lighting.

Synthesis and Photophysical Properties of Silver(I) Coordination Polymers Bridged by Dimethylpyrazine: Comparison of Emissive Excited States between Silver(I) and Copper(I) Congeners

Highly luminescent silver(I) coordination polymers [Ag2X2(PPh3)2(Me2pyz)]n (X = I, Br, Cl; Me2pyz: 2,5-dimethylpyrazine) were prepared together with copper congeners [Cu2X2(PPh3)2(Me2pyz)]n (X = I, Br). All the complexes showed thermally activated delayed fluorescence from the charge-transfer states in the visible region, from blue to red. The isomorphous relationship among the complexes allowed a detailed discussion of the effect of halogenido ligands and crystal packing on their luminescence energy. The relaxation in the emissive excited states (ESs) was determined to be more remarkable in silver complexes than in copper complexes despite their isomorphous structures, and the electronic effect of halogenido ligands was comparable to the effect of relaxation in emissive ESs.

Stabilization of Luminescent Mononuclear Three-Coordinate CuI Complexes by Two Distinct Cavity-Shaped Diphosphanes Obtained from a Single α-Cyclodextrin Precursor

Slightly different reaction conditions afforded two distinct cavity-shaped cis-chelating diphosphanes from the same starting materials, namely diphenyl(2-phosphanylphenyl)phosphane and an α-cyclodextrin-derived dimesylate. Thanks to their metal-confining properties, the two diphosphanes form only mononuclear [CuX(PP)] complexes (X=Cl, Br, or I) with the tricoordinated metal ion located just above the center of the cavity. The two series of CuI complexes display markedly different luminescence properties that are both influenced by the electronic properties of the ligand and the unique steric environment provided by the cyclodextrin (CD) cavity. The excited state lifetimes of all complexes are significantly longer than those of the cavity-free analogues suggesting peculiar electronic effects that affect radiative deactivation constants. The overall picture stemming from absorption and emission data suggests close-lying charge-transfer (MLCT, XLCT) and triplet ligand-centered (LC) excited states.

Photoactive Copper Complexes: Properties and Applications

Photocatalyzed and photosensitized chemical processes have seen growing interest recently and have become among the most active areas of chemical research, notably due to their applications in fields such as medicine, chemical synthesis, material science or environmental chemistry. Among all homogeneous catalytic systems reported to date, photoactive copper(I) complexes have been shown to be especially attractive, not only as alternative to noble metal complexes, and have been extensively studied and utilized recently. They are at the core of this review article which is divided into two main sections. The first one focuses on an exhaustive and comprehensive overview of the structural, photophysical and electrochemical properties of mononuclear copper(I) complexes, typical examples highlighting the most critical structural parameters and their impact on the properties being presented to enlighten future design of photoactive copper(I) complexes. The second section is devoted to their main areas of application (photoredox catalysis of organic reactions and polymerization, hydrogen production, photoreduction of carbon dioxide and dye-sensitized solar cells), illustrating their progression from early systems to the current state-of-the-art and showcasing how some limitations of photoactive copper(I) complexes can be overcome with their high versatility.

Effect of the dangling aromatic ring on neutral luminescent bis(phosphine) Cu(i)/Ag(i) complexes with the asymmetric pyridyl-tetrazolate ligands

A series of neutral luminescent bis(phosphine) Cu(i) complexes of pyridyl-tetrazolate ligands (L1-L3) with the general formula [CuI(L n )(P^P)] (1-6) were synthesized, which have been well characterized by IR, UV/vis, CV, 1H NMR and 31P NMR. For comparison, an Ag(i) complex [AgI(L2)(PPh3)2] (7) was also synthesized. The crystal structures of 2 and 7 have been further determined by X-ray crystallography. All these Cu(i) compounds show bright luminescence in the solid state with photoluminescence quantum yields (PLQYs) in the range of 25.8% to 85.0%. More interestingly, the Cu(i) complexes bearing an additional dangling aromatic ring on the diimine ligands exhibit enhanced luminescent performance in various solutions and their PLQYs are significantly higher than those of related Cu(i) complexes without steric protection. Compared with 1, the Cu(i) complexes with an additional dangling tetrazole moiety show a significant solvatochromic effect, which is uncommon for luminescent Cu(i) complexes. Moreover, [CuI(L2)(PPh3)2] (2) was further designed as an OLED material, which showed a high external quantum efficiency of 7.7%.

Unusual fluorescence behaviour of a heteroleptic Cu(i) complex featuring strong electron donating groups on a diimine ligand

Synthesis of a novel bulky diimine ligand and its corresponding heteroleptic Cu(i). Unusual fluorescence behavior of a novel Cu(i) complex due to a strong electron-donor diimine ligand.

Wide-Bite-Angle Diphosphine Ligands in Thermally Activated Delayed Fluorescent Copper(I) Complexes: Impact on the Performance of Electroluminescence Applications

We report a series of seven cationic heteroleptic copper(I) complexes of the form [Cu(P^P)(dmphen)]BF₄, where dmphen is 2,9-dimethyl-1,10-phenanthroline and P^P is a diphosphine chelate, in which the effect of the bite angle of the diphosphine ligand on the photophysical properties of the complexes was studied. Several of the complexes exhibit moderately high photoluminescence quantum yields in the solid state, with Φ_PL of up to 35%, and in solution, with Φ_PL of up to 98%. We were able to correlate the powder photoluminescence quantum yields with the % V_bur of the P^P ligand. The most emissive complexes were used to fabricate both organic light-emitting diodes and light-emitting electrochemical cells (LECs), both of which showed moderate performance. Compared to the benchmark copper(I)-based LECs, [Cu(dnbp)(DPEPhos)]⁺ (maximum external quantum efficiency, EQE_max = 16%), complex 3 (EQE_max = 1.85%) showed a much longer device lifetime (t_1/2 = 1.25 h and >16.5 h for [Cu(dnbp)(DPEPhos)]⁺ and complex 3, respectively). The electrochemiluminescence (ECL) properties of several complexes were also studied, which, to the best of our knowledge, constitutes the first ECL study for heteroleptic copper(I) complexes. Notably, complexes exhibiting more reversible electrochemistry were associated with higher annihilation ECL as well as better performance in a LEC.

Synthesis and Photophysical Properties of Emissive Silver(I) Halogenido Coordination Polymers Composed of {Ag2X2} Units Bridged by Pyrazine, Methylpyrazine, and Aminopyrazine

Luminescent silver(I) coordination polymers having a {Ag₂(μ-X)₂} rhombic core (X = I, Br) were prepared using pyrazine (pyz), methylpyrazine (Mepyz), and aminopyrazine (ampyz) as bridging ligands. Photophysical measurements show that the complexes were strongly luminescent in the solid state at room temperature; further, the emissive excited state of the pyz and Mepyz complexes was a triplet charge-transfer (³CT) excited state, similar to that of their copper(I) congeners, whereas that of the ampyz complex was a intraligand (³IL) excited state. The energy of the ³CT excited state of a silver halogenido complex was revealed to be ca. 5000 cm^-1 higher than that of the corresponding copper complex.

Tunable from Blue to Red Emissive Composites and Solids of Silver Diphosphane Systems with Higher Quantum Yields than the Diphosphane Ligands

PMMA composites and solids of complexes of formulas [AgX(P-P)]_n [n = 1 and 2; X = Cl, NO₃, ClO₄, CF₃COO, and OTf; P-P = dppb, xantphos, (PR₂)₂C₂B₁₀H₁₀ (R = Ph and ⁱPr)] display the whole palette of colors from blue to red upon selection of the anionic ligand (X) and the diphosphane (P-P). The diphosphane seems to play the most important role in tuning the emission energy and thermally activated delayed fluorescence (TADF) behavior. The PMMA composites of the complexes exhibit higher quantum yields than that of the diphosphane ligands and those with dppb are between 28 and 53%. Remarkably, instead of blue-green emissions which dominate the luminescence of silver diphosphane complexes in rigid phases, those with carborane diphosphanes are yellow-orange or orange-red emitters. Theoretical studies have been carried out for complexes with P-P = dppb, X = Cl; P-P = dppic, X = NO₃; P-P = dppcc, X = Cl, NO₃, and OTf and the mononuclear complexes [AgX(xantphos)] (X = Cl, Br). Optimization of the first excited triplet state was only possible for [AgX(xantphos)] (X = Cl and Br). A mixed MLCT and MC nature could be attributed to the S₀ → T₁ transition in these three-coordinated complexes.

Gold(I) Complexes Nuclearity in Constrained Ferrocenyl Diphosphines: Dramatic Effect in Gold-Catalyzed Enyne Cycloisomerization

Di-tert-butylated-bis(phosphino)ferrocene ligands bearing phosphino substituents R (R=phenyl, cyclohexyl, iso-propyl, mesityl, or furyl) allow tuning the selective formation of Au(I) halide complexes. Thus, dinuclear linear two-coordinate, but also rare mononuclear trigonal three-coordinate and tetrahedral four-coordinate complexes were formed upon tuning of the conditions. Both Au(I) chloride and rarer Au(I) iodide complexes were synthesized, and their X-ray diffraction analysis are reported. The significance of the control of structure and nuclearity in Au(I) complexes is further illustrated herein by its strong effect on the efficiency and selectivity of gold-catalysed cycloisomerization. Cationic linear digold(I) bis(dicyclohexylphosphino) ferrocenes outperform other catalysts in the demanding regioselective cycloisomerization of enyne sulphonamides into cyclohexadienes. Conversely, tetrahedral and trigonal cationic monogold(I) complexes were found incompetent for enyne cycloaddition. We used the two-coordinate linear electron-rich Au(I) complex 2 b (R=Cy) to extend the scope of selective intramolecular cycloaddition of different 1,6-enyne sulfonylamines with high activity and excellent selectivity to the endo cyclohexadiene products.

Self-Assembly of Ag+/[PW11NbO40]4- Complexes in Nonaqueous Solutions

Self-assembly between Ag⁺ and [PW₁₁NbO₄₀]^4- in N- and O-donor solvents (nitriles and amides) has been studied. In the case of dimethylformamide (DMF), formation of a yellow [Ag₄(DMF)₁₂][PW₁₁NbO₄₀] (1a) metastable phase and a colorless [Ag₄(DMF)₁₀][PW₁₁NbO₄₀] (1) stable phase was observed. In acetonitrile (CH₃CN), the product was [Ag(CH₃CN)₄]₂{[Ag(CH₃CN)₃]₂[PW₁₁NbO₄₀]} (2a). By contrast, [SiW₁₂O₄₀]^4- of the same size and charge as [PW₁₁NbO₄₀]^4- produces [Ag(CH₃CN)₃]₄[SiW₁₂O₄₀] (3a). Partial desolvation of 2a and 3a leads to Ag₄[PW₁₁NbO₄₀]·7.5CH₃CN (2) and Ag₄[SiW₁₂O₄₀]·7.5CH₃CN (3), respectively. The CH₃CN molecules in the structure of 2 are labile, and this compound was used as the starting material to study solvent-exchange processes in N-methyl-2-pyrrolidone (NMP), dimethylacetamide (DMA), diethylformamide (DEF), and benzonitrile (PhCN) solutions. These solvent reactions yield [Ag(DMA)₄][Ag₃(DMA)₆][PW₁₁NbO₄₀] (4), [Ag₂(NMP)₄(CH₃CN)]₂[PW₁₁NbO₄₀]·1.3NMP (5a), [Ag₂(NMP)₅]₂[PW₁₁NbO₄₀] (5b), Ag₄[PW₁₁NbO₄₀]·9.5DEF (6), and [Ag(PhCN)₄]₂[{Ag(PhCN)₃}₂PW₁₁NbO₄₀] (7). All products were isolated and characterized by single-crystal X-ray diffraction (except for 2 and 3), IR, elemental analysis, and thermogravimetric analysis techniques. The O-donor solvents favor polynuclear, solvent-bridged cationic aggregates. In the case of DMF, DMA, and DEF discrete, tri- and tetranuclear polycations are observed, while in the case of NMP, the formation of infinite polycationic structures takes place. By contrast, the N-donor solvents (CH₃CN and PhCN) favor mononuclear cations, which can exist either as distorted tetrahedral, isolated [Ag(Solv)₄]⁺ cations or as pseudotriangular {Ag(Solv)₃}⁺ units, additionally coordinated to a polyoxometalate. Screening of the luminescent properties for solid samples of 1-7 revealed that only 5a/5b and 7 are emissive. In particular, the sample containing 5a and 5b demonstrates long-lived phosphorescence with a 30 ms lifetime.

Excitation wavelength dependent emission of silver(i) complexes with a pyrimidine ligand

Interplay of three emission mechanisms for silver(i) complexes leads to luminescence thermochromism and color tunable emission.

Luminescent phosphine copper(i) complexes with various functionalized bipyridine ligands: synthesis, structures, photophysics and computational study

A new series of luminescent phosphine copper(i) complexes with cyano- and hydroxyl-substituted 2,2′-bipyridine ligands have been synthesized and structurally characterized. Their luminescent properties have also been investigated in detail.

Polynuclear Cu(i) and Ag(i) phosphine complexes containing multi-dentate polytopic ligands: syntheses, crystal structures and photoluminescence properties

A series of polynuclear metal complexes, [Cu2(L1)(PPh3)4](ClO4)2 (1), [Cu3(L2)(PPh3)6](ClO4) (2), [Cu3(L3)(PPh3)6] (3), [Ag2(L1)(PPh3)4](BF4)2 (4), [Ag4(L2)2(PPh3)6] (5) and [Ag3(L3)(PPh3)5] (6), have been obtained from the reactions of the highly conjugated bridging ligands 2,3-bis(2-pyridyl)pyrazine (L1), 2,3-bis(2-tetrazoyl)pyrazine (H2L2) and 2,3-bis(2-tetrazoyl)imidazole (H3L3) with [Cu(MeCN)4]ClO4 and AgBF4, respectively. Their crystal structures have been determined by X-ray crystallography and their photophysical properties have been investigated in detail. Complexes 1 and 3 show photoluminescence in CH2Cl2 solution, while all the complexes exhibit obvious luminescence in the solid state; detailed photophysical studies and density functional theory calculations of these complexes have revealed that their lowest energy absorptions and emissions are predominantly derived from either metal-to-ligand charge-transfer (MLCT) or intraligand (IL) excited states.

Photoluminescent Cu(i) vs. Ag(i) complexes: slowing down emission in Cu(i) complexes by pentacoordinate low-lying excited states

Replacement of copper(i) ions by silver(i) improves the solid-state photoluminescence properties.

Ag(i) complex design affording intense phosphorescence with a landmark lifetime of over 100 milliseconds

A new Ag(i) complex was designed that shows an unprecedentedly long ambient temperature emission decay time of τ = 110 ms at an emission quantum yield of Φ_PL = 50%, as measured for a doped PMMA matrix.

Photoredox catalysts based on earth-abundant metal complexes

Visible light photoredox catalysis has exploded into the consciousness of the synthetic chemist. We critically review Earth-abundant metal complexes photocatalysts including Cu(i), Zn(ii), Ni(0), V(v), Zr(iv), W(0), W(vi), Mo(0), Cr(iii), Co(iii) and Fe(ii).

New Lamellar Silver Thiolate Coordination Polymers with Tunable Photoluminescence Energies by Metal Substitution

The structures of two lamellar silver thiolate coordination polymers [Ag( p-SPhCO₂H)] _n (1) and [Ag( p-SPhCO₂Me)] _n (2) are described for the first time. Their inorganic part is composed of distorted Ag₃S₃ honeycomb networks separated by noninterpenetrated thiolate ligands. The main difference between the two compounds arises from dimeric hydrogen bonds present for the carboxylic acids. Indepth photophysical studies show that the silver thiolates exhibit multiemission properties, implying luminescence thermochromism. More interestingly, the synthesis of a heterometallic lamellar compound, [Ag_0.85Cu_0.15( p-SPhCO₂H)] _n (3), allows to obtain mixed metal thiolate coordination polymers and to tune the photophysical properties with the excitation wavelengths from a green vibronic luminescence to a single red emission band.

Luminescent copper(i) complexes with bisphosphane and halogen-substituted 2,2'-bipyridine ligands

Heteroleptic [Cu(P^P)(N^N)][PF6] complexes, where N^N is a halo-substituted 2,2'-bipyridine (bpy) and P^P is either bis(2-(diphenylphosphino)phenyl)ether (POP) or 4,5-bis(diphenylphosphino)-9,9-dimethylxanthene (xantphos) have been synthesized and investigated. To stabilize the tetrahedral geometry of the copper(i) complexes, the steric demands of the bpy ligands have been increased by introducing 6- or 6,6'-halo-substituents in 6,6'-dichloro-2,2'-bipyridine (6,6'-Cl2bpy), 6-bromo-2,2'-bipyridine (6-Brbpy) and 6,6'-dibromo-2,2'-bipyridine (6,6'-Br2bpy). The solid-state structures of [Cu(POP)(6,6'-Cl2bpy)][PF6], [Cu(xantphos)(6,6'-Cl2bpy)][PF6]·CH2Cl2, [Cu(POP)(6-Brbpy)][PF6] and [Cu(xantphos)(6-Brbpy)][PF6]·0.7Et2O obtained from single crystal X-ray diffraction are described including the pressure dependence of the structure of [Cu(POP)(6-Brbpy)][PF6]. The copper(i) complexes with either POP or xantphos and 6,6'-Cl2bpy, 6-Brbpy and 6,6'-Br2bpy are orange-to-red emitters in solution and yellow-to-orange emitters in the solid state, and their electrochemical and photophysical properties have been evaluated with the help of density functional theory (DFT) calculations. The emission properties are strongly influenced by the substitution pattern that largely affects the geometry of the emitting triplet state. [Cu(POP)(6,6'-Cl2bpy)][PF6] and [Cu(xantphos)(6,6'-Cl2bpy)][PF6] show photoluminescence quantum yields of 15 and 17%, respectively, in the solid state, and these compounds were tested as luminophores in light-emitting electrochemical cells (LECs). The devices exhibit orange electroluminescence and very short turn-on times (<5 to 12 s). Maximum luminance values of 121 and 259 cd m-2 for [Cu(POP)(6,6'-Cl2bpy)][PF6] and [Cu(xantphos)(6,6'-Cl2bpy)][PF6], respectively, were achieved at an average current density of 100 A m-2. External quantum efficiencies of 1.2% were recorded for both complexes.

Near-unity thermally activated delayed fluorescence efficiency in three- and four-coordinate Au(i) complexes with diphosphine ligands

The synthesis and photoluminescence properties of three-coordinate Au(i) complexes with rigid diphosphine ligands LMe {1,2-bis[bis(2-methylphenyl)phosphino]benzene}, LEt {1,2-bis[bis(2-ethylphenyl)phosphino]benzene}, and LiPr {1,2-bis[bis(2-isopropylphenyl)phosphino]benzene} are investigated. The LMe and LEt ligands afford two types of complexes: dinuclear complexes [μ-LMe(AuCl)2] (1d) and [μ-LEt(AuCl)2] (2d) with an Au(i)-Au(i) bond and mononuclear three-coordinate Au(i) complexes LMeAuCl (1) and LEtAuCl (2). On the other hand, the bulkiest ligand, LiPr, affords three-coordinate Au(i) complexes, LiPrAuCl (3) and LiPrAuI (4), but no dinuclear complexes. X-ray analysis suggests that both 3 and 4 possess a highly distorted trigonal planar geometry. Moreover, luminescence data reveal that at room temperature, 3 and 4 exhibit yellow-green thermally activated delayed fluorescence in the crystalline state with maximum emission wavelengths at 558 and 549 nm, respectively. The emission yields are close to unity. Quantum chemical calculations suggest that the emission of 4 originates from the (σ + X) → π* excited state that possesses strong intraligand charge-transfer character. The luminescent properties of four-coordinate Au(i) complex (5) possessing a tetrahedral geometry are discussed on the basis of the emission spectra and decay times measured in a temperature range of 309-77 K.

Dinuclear Cu(I) Complex with Combined Bright TADF and Phosphorescence. Zero-Field Splitting and Spin-Lattice Relaxation Effects of the Triplet State

The three-fold bridged dinuclear Cu(I) complex Cu₂(μ-I)₂(1 N- n-butyl-5-diphenyl-phosphino-1,2,4-triazole)₃, Cu₂I₂(P^N)₃, shows bright thermally activated delayed fluorescence (TADF) as well as phosphorescence at ambient temperature with a total quantum yield of 85% at an emission decay time of 7 μs. The singlet (S₁)-triplet (T₁) energy gap is as small as only 430 cm^-1 (53 meV). Spin-orbit coupling induces a short-lived phosphorescence with a decay time of 52 μs ( T = 77 K) and a distinct zero-field splitting (ZFS) of T₁ into substates by ∼2.5 cm^-1 (0.3 meV). Below T ≈ 10 K, effects of spin-lattice relaxation (SLR) are observed and agree with the size of ZFS. According to the combined phosphorescence and TADF, the overall emission decay time is reduced by ∼13% as compared to the TADF-only process. The compound may potentially be applied in solution-processed OLEDs, exploiting both the singlet and triplet harvesting mechanisms.

Dinuclear Ag(I) Complex Designed for Highly Efficient Thermally Activated Delayed Fluorescence

The dinuclear Ag(I) complex has been designed to show thermally activated delayed fluorescence (TADF) of high efficiency. Strongly electron-donating terminal ligands are introduced to destabilize the d orbitals of the Ag⁺ ions. Consequently, the orbitals distinctly contribute to the HOMO, whereas the LUMO is localized on the bridging ligand. This ensures charge transfer character of the lowest excited singlet S₁ and triplet T₁ states. Accordingly, a small energy gap ΔE(S₁-T₁) is obtained, being essential for TADF behavior. Photophysical investigations show that at ambient temperature the complex exhibits TADF reaching a quantum yield of Φ_PL = 70% with the decay time of only τ = 1.9 μs, manifesting one of the fastest TADF decays observed so far. Such an outstanding TADF efficiency is based on a small value of ΔE(S₁-T₁) = 480 cm^-1 combined with a large transition rate of k(S₁ → S₀) = 2.2 × 10⁷ s^-1.

The coordination- and photochemistry of copper(i) complexes: variation of N^N ligands from imidazole to tetrazole

Prediction rules for the coordination chemistry of copper(i) with neutral or deprotonated N^N ligands and different phosphines were derived and related to their photoluminescence.

Copper(i) and silver(i) complexes of 9,9-dimethyl-4,5-bis(di-tert-butylphosphino)xanthene: photophysical properties and structural rigidity under pressure

Structural, photophysical and electrochemical properties of heteroleptic copper(i) and silver(i) complexes [M(tBu-xantphos)(bpy)][PF₆] are described where tBu-xantphos is 4,5-bis(di-tert-butylphosphino)-9,9-dimethylxanthene.

TADF Material Design: Photophysical Background and Case Studies Focusing on CuI and AgI Complexes

The development of organic light emitting diodes (OLEDs) and the use of emitting molecules have strongly stimulated scientific research of emitting compounds. In particular, for OLEDs it is required to harvest all singlet and triplet excitons that are generated in the emission layer. This can be achieved using the so-called triplet harvesting mechanism. However, the materials to be applied are based on high-cost rare metals and therefore, it has been proposed already more than one decade ago by our group to use the effect of thermally activated delayed fluorescence (TADF) to harvest all generated excitons in the lowest excited singlet state S₁ . In this situation, the resulting emission is an S₁ →S₀ fluorescence, though a delayed one. Hence, this mechanism represents the singlet harvesting mechanism. Using this effect, high-cost and strong SOC-carrying rare metals are not required. This mechanism can very effectively be realized by use of Cu^I or Ag^I complexes and even by purely organic molecules. In this investigation, we focus on photoluminescence properties and on crucial requirements for designing Cu^I and Ag^I materials that exhibit short TADF decay times at high emission quantum yields. The decay times should be as short as possible to minimize non-radiative quenching and, in particular, chemical reactions that frequently occur in the excited state. Thus, a short TADF decay time can strongly increase the material's long-term stability. Here, we study crucial parameters and analyze their impact on the TADF decay time. For example, the energy separation ΔE(S₁ -T₁ ) between the lowest excited singlet state S₁ and the triplet state T₁ should be small. Accordingly, we present detailed photophysical properties of two case-study materials designed to exhibit a large ΔE(S₁ -T₁ ) value of 1000 cm^-1 (120 meV) and, for comparison, a small one of 370 cm^-1 (46 meV). From these studies-extended by investigations of many other Cu^I TADF compounds-we can conclude that just small ΔE(S₁ -T₁ ) is not a sufficient requirement for short TADF decay times. High allowedness of the transition from the emitting S₁ state to the electronic ground state S₀ , expressed by the radiative rate k^r (S₁ →S₀ ) or the oscillator strength f(S₁ →S₀ ), is also very important. However, mostly small ΔE(S₁ -T₁ ) is related to small k^r (S₁ →S₀ ). This relation results from an experimental investigation of a large number of Cu^I complexes and basic quantum mechanical considerations. As a consequence, a reduction of τ(TADF) to below a few μs might be problematic. However, new materials can be designed for which this disadvantage is not prevailing. A new TADF compound, Ag(dbp)(P₂ -nCB) (with dbp=2,9-di-n-butyl-1,10-phenanthroline and P₂ -nCB=bis-(diphenylphosphine)-nido-carborane) seems to represent such an example. Accordingly, this material shows TADF record properties, such as short TADF decay time at high emission quantum yield. These properties are based (i) on geometry optimizations of the Ag^I complex for a fast radiative S₁ →S₀ rate and (ii) on restricting the extent of geometry reorganizations after excitation for reducing non-radiative relaxation and emission quenching. Indeed, we could design a TADF material with breakthrough properties showing τ(TADF)=1.4 μs at 100 % emission quantum yield.

σ-Hammett parameter: a strategy to enhance both photo- and electro-luminescence features of heteroleptic copper(i) complexes

Hammett was also right for devices. This work directly links the enhancement of both the photoluminescence properties in solid-state and the electroluminescence features in light-emitting electrochemical cells (LECs) with a rational ligand design using the σ-Hammett parameter.

Photoluminescence properties of TADF-emitting three-coordinate silver(i) halide complexes with diphosphine ligands: a comparison study with copper(i) complexes

A series of three- and four-coordinate silver(i) halide complexes exhibiting efficient blue thermally activated delayed fluorescence have been prepared.

Neutral Mononuclear Copper(I) Complexes: Synthesis, Crystal Structures, and Photophysical Properties

Neutral green-emitting four-coordinate Cu(I) complexes with general formula POPCu(NN), where POP = bis[2-(diphenylphosphino)phenyl]ether and NN = substituted 2-pyridine-1,2,4-triazole ligands, were synthesized. The crystal structures of (POPCuMeCN)(+)(PF6)(-) (1), POPCuPhPtp (2a, PhPtp = 2-(5-phenyl-2H-[1,2,4]triazol-3-yl)-pyridine), and POPCu(3,5-2FPhPtp) (2d, 3,5-2FPhPtp = 2-(5-(3,5-difluorophenyl)-2H-1,2,4-triazol-3-yl)pyridine) were determined by single-crystal X-ray diffraction analysis. The electronic and photophysical properties of the complexes were examined by UV-vis, steady-state, and time-resolved spectroscopy. At room temperature, weak emission was observed in solution, while in the solid state, all complexes exhibit intense green emission with quantum yield up to 0.54. The electronic and photophysical properties were further supported by calculation performed at the (time-dependent) density functional theory level. One of the complexes was also tested as dopant in electroluminescent devices.

Neutral, heteroleptic copper(i)-4H-imidazolate complexes: synthesis and characterization of their structural, spectral and redox properties

Facile synthetic access to four novel, neutral, heteroleptic copper(i)-complexes, incorporating 4H-imidazolates as well as the phosphane ligands XantPhos and DPEPhos is reported.

Origin of a counterintuitive yellow light-emitting electrochemical cell based on a blue-emitting heteroleptic copper(i) complex

A new copper(i) complex, which lacks of charge transfer character in the excited state, features a blue fluorescence and yellow phosphorescence photo- and electro-responses, respectively.