Facile Synthesis of Bimodal Mesoporous Fe3O4@SiO2Composite for Efficient Removal of Methylene Blue

Research progress on the magnetite nanoparticles in the fields of water pollution control and detection

Magnetite nanoparticles (MNPs) have shown increasing application in the fields of water pollution control and detection due to their perfect combination of interfacial functionalities and physicochemical properties, such as surface interface adsorption, (synergistic) reduction, catalytic oxidation, and electrical chemistry. This review presents the research advances in the synthesis and modification methods of MNPs in recent years, systematically summarizes the performances of MNPs and their modified materials in terms of three technical systems, including single decontamination system, coupled reaction system, and electrochemical system. In addition, the progress of the key roles played by MNPs in adsorption, reduction, catalytic oxidative degradation and their coupling with zero-valent iron for the reduction of pollutants are described. Moreover, the application prospect of MNPs-based electrochemical working electrodes for detecting micro-pollutants in water were also discussed in detail. This review addresses that the construction of MNPs-based systems for water pollution control and detection should be adapted to the natures of the target pollutants in water. Finally, the following research directions of MNPs and their remaining challenges are outlooked. In general, this review will inspire MNPs researchers in different fields for effective control and detection of a variety of contaminants in water.

A Novel P@SiO2 Nano-Composite as Effective Adsorbent to Remove Methylene Blue Dye from Aqueous Media

This work aims to prepare a novel phosphate-embedded silica nanoparticles (P@SiO₂) nanocomposite as an effective adsorbent through a hydrothermal route. Firstly, a mixed solution of sodium silicate and sodium phosphate was passed through a strong acidic resin to convert it into hydrogen form. After that, the resultant solution was hydrothermally treated to yield P@SiO₂ nanocomposite. Using kinetic studies, methylene blue (MB) dye was selected to study the removal behavior of the P@SiO₂ nanocomposite. The obtained composite was characterized using several advanced techniques. The experimental results showed rapid kinetic adsorption where the equilibrium was reached within 100 s, and the pseudo-second-order fitted well with experimental data. Moreover, according to Langmuir, one gram of P@SiO₂ nanocomposite can remove 76.92 mg of the methylene blue dye. The thermodynamic studies showed that the adsorption process was spontaneous, exothermic, and ordered at the solid/solution interface. Finally, the results indicated that the presence of NaCl did not impact the adsorption behavior of MB dye. Due to the significant efficiency and promising properties of the prepared P@SiO₂ nanocomposite, it could be used as an effective adsorbent material to remove various cationic forms of pollutants from aqueous solutions in future works.

Magnetic Separation of Oxoacid of Boron from Salt-Lake Brine by Synergistically Enhanced Boron Adsorbents of Glucose-Functionalized SiO2 and Graphene

The adsorption separation and extraction of low-concentration boron from salt-lake brine have great significance. Magnetic separation avoids the problem of adsorbent granulation and improves the usage efficiency. The silicon-based adsorbents have attracted interest due to their superior acid and alkali resistance, in which polyhydroxy graphene enhances the adsorption of boron ions. Herein different boron adsorbents, derived by magnetic separation, were developed and characterized by SEM, TEM, XPS, VSM, FT-IR, and XRD analysis. The adsorption-desorption performance of boron adsorbents with different compositions was evaluated. The isotherms and kinetics parameters of the boron extraction were evaluated based on adsorption-desorption tests. The graphene-based magnetic adsorbent (Go-Fe3O4@SiO2@mSiO2-Glu) registered a high boron adsorption capacity of 23.90 mg/g at pH = 9 in the boron solution and 24.84 mg/g for East Taigener salt-lake brine. The Na+, Mg2+, Ca2+, and Cl− ions have little interference with the boron adsorption. The adsorbents exhibit magnetic separation performance and good cycle life. The results showed that acid-alkali desorption solution has little effect on the adsorbents, and the composite of graphene enhances the adsorption of boron ions. The adsorbents developed in this study are promising to recover boron from low-concentration boron-containing salt-lake brines.

Novel Magnetic Nanocomposites Based on Carboxyl-Functionalized SBA-15 Silica for Effective Dye Adsorption from Aqueous Solutions

In this study, three novel magnetic nanocomposites based on carboxyl-functionalized SBA-15 silica and magnetite nanoparticles were prepared through an effective and simple procedure and applied for methylene blue (MB) and malachite green G (MG) adsorption from single and binary solutions. Structure, composition, morphology, magnetic, and textural properties of the composites were thoroughly investigated. The influence of the amount of carboxyl functional groups on the physicochemical and adsorptive properties of the final materials was investigated. The capacity of the synthesized composites to adsorb MB and MG from single and binary solutions and the factors affecting the adsorption process, such as contact time, solution pH, and dye concentration, were assessed. Kinetic modelling showed that the dye adsorption mechanism followed the pseudo-second-order kinetic model, indicating that adsorption was a chemically controlled multilayer process. The adsorption rate was simultaneously controlled by external film diffusion and intraparticle diffusion. It was evidenced that the molecular geometry of the dye molecule plays a major role in the adsorption process, with the planar geometry of the MB molecule favoring adsorption. The analysis of equilibrium data revealed the best description of MB adsorption behavior by the Langmuir isotherm model, whereas the Freundlich model described better the MG adsorption.

Bio-templated synthesis of porous silica nano adsorbents to wastewater treatment inspired by a circular economy

Water is an indispensable substance in human life activities. However, due to industrial discharge problems, water resources are polluted, so there is an urgent need for material and technology for wastewater treatment. This paper presents an innovative synthesis of porous silica microspheres (PSM) from a biomass template material (fish skin collagen) to treat protein from wastewater. The collagen from the biomass template was rich in amino, carboxyl, and hydroxyl groups that effectively controlled the hydrolysis rate of tetraethyl orthosilicate (TEOS) and promoted the synthesis of structured PSM. X-ray photoelectron spectroscopy (XPS), X-ray powder diffraction (XRD), nitrogen sorption isotherms measurements, scanning electron microscopy (SEM) and transmission electron microscopy (TEM) were utilized to characterize the chemical composition, crystalline structure, and pore architecture of the synthesized PSM. The characterization results confirmed that the PSM were spherical with the microporous and mesoporous structure in shape and approximately 400 nm in size. Moreover, the pore size could be tuned by addition of mesitylene (TMB). The large number of silicon hydroxyl groups on the PSM surface effectively bound proteins in wastewater and greatly improved the overall absorption rate. The PSM adsorption capacity for lysozyme (LZ) was 49.5 mg/g, and the adsorption behavior was well described by a pseudo-second-order kinetic model and the Langmuir model. Most importantly, the PSM effectively removed protein from actual industrial wastewater, thereby realizing a high value-added utilization of wastewater pollutants.

Yolk-shell structured magnetic mesoporous silica: a novel and highly efficient adsorbent for removal of methylene blue

In this study, a novel magnetic mesoporous silica with yolk-shell structure (Fe3O4@Void@m.SiO2) was successfully synthesized via a polymer-template assisted method. The Fe3O4@Void@m.SiO2 was characterized by using FT-IR, EDS, SEM, TEM, VSM, PXRD and nitrogen adsorption-desorption analyses. The Fe3O4@Void@m.SiO2 nanocomposite showed high efficiency in adsorption of an organic dye and water pollutant called methylene blue (MB) with 98.2% removal capability. Furthermore, the effect of different parameters in the adsorption of MB was investigated. Different models of kinetic were examined and compared with each other. The recoverability and reusability of designed Fe3O4@Void@m.SiO2 material were also studied under applied conditions.

Treatment of microvascular invasion in hepatocellular carcinoma with drug-loaded nanocomposite platform under synergistic effect of magnetic field/near-infrared light

Despite progress in clinical treatment, microvascular invasion (MVI) remains a major factor for frequent recurrence and metastasis of hepatocellular carcinoma (HCC) after liver resection and surgery. Thus, this study constructed a target nanoplatform (αCD97-USPIO-Au-DDP) with magnetic field/near-infrared (NIR) light response using ultrasmall superparamagnetic iron oxide-gold nanoporous spheres (USPIO-Au) as multifunctional nanocarrier. Anticancer drug cisplatin (DDP) was loaded, and specifically expressed CD97 protein in MVI was taken as the therapeutic target. The αCD97-USPIO-Au-DDP showed favorable photothermal and stable properties under the NIR light at 808 nm wavelength. As suggested by in vitro and in vivo research, this composite nanopreparation could effectively reduce damage to normal organs and showed good biocompatibility. Excellent magnetic targeting function of nanocarrier and modification of αCD97 strengthened accumulation of composite nanodrug in tumor to inhibit tumor growth. This system may have important ramifications for treatment of MVI in HCC.

Tuning of Shells in Trilaminar Core@Shell Nanocomposites in Controlling Electromagnetic Interference through Switching of the Shielding Mechanism

Fe₃O₄@SiO₂@PPy core-shell nanocomposites were fabricated by the coating of SiO₂ on Fe₃O₄ through base catalyzed hydrolysis of tetraethyl orthosilicate followed by encapsulation of polypyrrole (PPy). Subsequently, these trilaminar composites have been characterized by Fourier-transform infrared spectroscopy, X-ray diffraction, X-ray photoelectron spectroscopy, transmission electron microscopy, Brunauer-Emmett-Teller, superconducting quantum interference devices, and measurement of the total shielding efficiency in the frequency range of 2-8 GHz. Our findings showed the highest total shielding efficiency (∼32 dB) of Fe₃O₄@SiO₂@PPy (Fe₃O₄@SiO₂/pyrrole wt/wt = 1:9) and followed reflection as the dominant shielding mechanism. Such performance was attributed to poor impedance matching between the PPy (conducting)/SiO₂ (insulating) and high electrical conductivity of Fe₃O₄@SiO₂@PPy. Alternatively, electromagnetic (EM) waves incident on the SiO₂@PPy interface could also account for enhancing the total shielding efficiency of Fe₃O₄@SiO₂@PPy because of multireflection/refraction. Our earlier work also showed excellent total shielding efficiency of Fe₃O₄@C@PANI nanocomposites, through absorption as the dominant shielding mechanism. These findings clearly suggest that EM interference shielding in Fe₃O₄@SiO₂@PPy and Fe₃O₄@C@PANI trilaminar core@shell nanocomposites is controlled by tuning of the shells through switching of the mechanism.

Dispersity, mesoporous structure and particle size modulation of hollow mesoporous silica nanoparticles with excellent adsorption performance

Hollow mesoporous silica nanoparticles with different dispersities, mesoporous structures and particle sizes, and excellent adsorption performance have been systematically synthesized.

Synthesis of Magnetic Microspheres with Sodium Alginate and Activated Carbon for Removal of Methylene Blue

Based on the adsorption performance of composite microspheres with activated carbon (AC) and sodium alginate (SA), as well as the magnetic property of Fe₃O₄, we designed and explored an efficient strategy to prepare a unique, multifunctional Fe₃O₄/AC/SA composite absorbent (MSA-AC) that extracted dye from aqueous solution. The composite exhibited the following advantages: rapid and simple to prepare, environmentally friendly process, low-cost, recyclability, and multi-functionality. The physicochemical properties of the prepared magnetic microspheres were measured, and methylene blue (MB) was selected to investigate the performance of the magnetic absorbent. The results showed a maximum adsorption capacity of 222.3 mg/g for MB. Adsorption studies revealed that the data of adsorption isotherms and kinetics fit the pseudo-second-order kinetic model and Langmuir isotherm model.

Environmental implications and applications of engineered nanoscale magnetite and its hybrid nanocomposites: A review of recent literature

This review focuses on environmental implications and applications of engineered magnetite (Fe3O4) nanoparticles (MNPs) as a single phase or a component of a hybrid nanocomposite that exhibits superparamagnetism and high surface area. MNPs are synthesized via co-precipitation, thermal decomposition and combustion, hydrothermal process, emulsion, microbial process, and green approaches. Aggregation/sedimentation and transport of MNPs depend on surface charge of MNPs and geochemical parameters such as pH, ionic strength, and organic matter. MNPs generally have low toxicity to humans and ecosystem. MNPs are used for constructing chemical/biosensors and for catalyzing a variety of chemical reactions. MNPs are used for air cleanup and carbon sequestration. MNP nanocomposites are designed as antimicrobial agents for water disinfection and flocculants for water treatment. Conjugated MNPs are widely used for adsorptive/separative removal of organics, dyes, oil, arsenic, phosphate, molybdate, fluoride, selenium, Cr(VI), heavy metal cations, radionuclides, and rare earth elements. MNPs can degrade organic/inorganic contaminants via chemical reduction or catalyze chemical oxidation in water, sediment, and soil. Future studies should further explore mechanisms of MNP interactions with other nanomaterials and contaminants, economic and green approaches of MNP synthesis, and field scale demonstration of MNP utilization.

Au/BiOCl heterojunction within mesoporous silica shell as stable plasmonic photocatalyst for efficient organic pollutants decomposition under visible light

A new mesoporous silica protected plasmonic photocatalyst, Au/BiOCl@mSiO2, was prepared by a modified AcHE method and a subsequent UV light induced photodeposition process. The surfactant-free heterojunction allows the electrons spontaneously flow from Au to nearby BiOCl surface, leading to the accumulation of positive charges on Au surface, and negative charges on Bi species under visible light. Au/BiOCl@mSiO2 exhibits high visible light photocatalytic efficiency in complete oxidation of aqueous formaldehyde and Rhodamin B. We showed that a positive relationship exists between the LSPR effect and rate enhancements, and leads to a hypothesis that the metallic Au LSPR enhances the photocatalytic rates on nearby semiconductors by transferring energetic electrons to BiOCl and increasing the steady-state concentration of active OH species by a multi-electron reduction of molecular oxygen. The OH species is the main oxidant in photocatalytic transformations, whose intensity is greatly enhanced in the dye-involving systems due to the synergetic effect between LSPR and dye sensitization processes. In addition, the mesoporous SiO2 shell not only inhibits the over growth of BiOCl nanocrystals within the silica frameworks, but also protects the dissolution of chloride or Au species into aqueous solution, which ultimately makes the Au/BiOCl@mSiO2 catalysts rather stable during photocatalysis.

A Novel Controlled Release Immunosensor based on Benzimidazole Functionalized SiO2 and Cyclodextrin Functionalized Gold

A novel controlled release system-based sandwich-type immunosensor is fabricated to detect squamous cell carcinoma antigen (SCCA). The 1-methyl-1H-benzimidazole functionalized mesoporous SiO₂ (MBI-MS) is used to load methylene blue (MB). β-cyclodextrin functionalized gold (CD-Au) is introduced as the gatekeeper for encapsulating MB and capturing the adamantly functional detection antibody (ADA-Ab₂). And pH stimulus serves as the trigger system to control the MB release. After the load of MB, the CD-Au blocks the pores of the MBI-MS by the host-guest interaction in the neutral condition. However, when the pH is below 7.0, CD-Au is separated from the surface of MBI-MS owing to the protonation of the aromatic amines. The encapsulated MB is released from the pores of MBI-MS and detected by square wave voltammetry. The controlled release immunosensor shows a relatively wide linear range from 0.001 to 20 ng·mL⁻¹ with a low detection limit of 0.25 pg·mL⁻¹. The immunosensor also shows good reproducibility and selectivity, which endows it broad application prospect in clinical research.

Enhanced photodegradation of dyes and mixed dyes by heterogeneous mesoporous Co–Fe/Al2O3–MCM-41 nanocomposites: nanoparticles formation, semiconductor behavior and mesoporosity

Fabrication of mono and bimetallic nanoparticles by in situ sol–gel cum hydrothermal method for photo degradation of dyes and mixed dyes.

Core–shell structured Fe3O4@SiO2@CdS nanoparticles with enhanced visible-light photocatalytic activities

Uniform core–shell structured Fe₃O₄@SiO₂@CdS is synthesized by a facile chelating-assistant growth route, which enhances the photocatalytic activities.