Scorpionate Complexes as Models for Molybdenum Enzymes

Influence of the ligand-field on EPR parameters of cis- and trans-isomers in MoV systems relevant to molybdenum enzymes: Experimental and density functional theory study

The electron paramagnetic resonance (EPR) investigation of mononuclear cis- and trans-(L1O)MoOCl2 complexes [L1OH = bis(3,5-dimethylpyrazolyl)-3-tert-butyl-2-hydroxy-5-methylphenyl)methane] reveals a significant difference in their spin Hamiltonian parameters which reflect different equatorial and axial ligand fields created by the heteroscorpionate donor atoms. Density functional theory (DFT) was used to calculate the values of principal components and relative orientations of the g and A tensors, and the molecular framework in four pairs of isomeric mononuclear oxo‑molybdenum(V) complexes (cis- and trans-(L1O)MoOCl2, cis,cis- and cis,trans-(L-N2S2)MoOCl [L-N2S2H2 = N,N'-dimethyl-N,N'-bis(mercaptophenyl)ethylenediamine], cis,cis- and cis,trans-(L-N2S2)MoO(SCN), and cis- and trans-[(dt)2MoO(OMe)]2- [dtH2 = 2,3-dimercapto-2-butene]). Scalar relativistic DFT calculations were conducted using three different exchange-correlation functionals. It was found that the use of hybrid exchange-correlation functional with 25% of the Hartree-Fock exchange leads to the best quantitative agreement between theory and experiment. A simplified ligand-field approach was used to analyze the influence of the ligand fields in all cis- and trans-isomers on energies and contributions of molybdenum d-orbital manifold to g and A tensors and relative orientations. Specifically, contributions that originated from the spin-orbit coupling of the dxz, dyz, and dx2-y2 orbitals into the ground state have been discussed. The new findings are discussed in the context of the experimental data of mononuclear molybdoenzyme, DMSO reductase.

Synthesis and characterisation of group 8 tris(1-benzyl-1,2,3-triazol-4-yl)-p-anisolylmethane complexes

The tris(1,2,3-triazol-4-yl)methane framework offers a highly versatile architecture for ligand design, yet the coordination chemistry of this class of ligand remains largely unexplored. We report here the synthesis and characterisation of the homoleptic complexes [M(ttzm)₂](PF₆)₂ (ttzm = tris(1-benzyl-1,2,3-triazol-4-yl)-p-anisolylmethane; M = Fe (Fe), Ru (Ru), Os (Os)). Initial attempts to prepare Ru by reaction of [Ru(p-cymene)Cl₂]₂ and ttzm also led to the isolation of the heteroleptic complex [Ru(p-cymene)(ttzm)](PF₆)₂. The structures of [Ru(p-cymene)(ttzm)](PF₆)₂, [Fe(ttzm)₂]²⁺ (as its BPh₄^- salt) and Os were solved by X-ray diffraction. The homoleptic Fe(II) and Os(II) containing cations adopt distorted octahedral geometries due to the steric interactions between the ansiole and triazole rings of the ttzm ligands. The homoleptic complexes all adopt a low-spin d⁶ configuration and exhibit reversible M(II)/M(III) processes (+0.35 to +0.72 V vs. Fc/Fc⁺). These oxidation processes are cathodically shifted relative to those of related hexatriazole donor based complexes with density functional theory (DFT) calculations showing the metal d-orbitals are destabilised through a π-donor contribution from the triazole rings. The complexes all show prominent UV-visible absorption bands between 350 and 450 nm assigned to transitions of ¹MLCT character. Whilst none of the homoleptic complexes are emissive in room temperature fluid solutions, Os is emissive at 77 K in an EtOH/MeOH glass (λ_max 472 nm).

Inspired by Nature-Functional Analogues of Molybdenum and Tungsten-Dependent Oxidoreductases

Throughout the previous ten years many scientists took inspiration from natural molybdenum and tungsten-dependent oxidoreductases to build functional active site analogues. These studies not only led to an ever more detailed mechanistic understanding of the biological template, but also paved the way to atypical selectivity and activity, such as catalytic hydrogen evolution. This review is aimed at representing the last decade’s progress in the research of and with molybdenum and tungsten functional model compounds. The portrayed systems, organized according to their ability to facilitate typical and artificial enzyme reactions, comprise complexes with non-innocent dithiolene ligands, resembling molybdopterin, as well as entirely non-natural nitrogen, oxygen, and/or sulfur bearing chelating donor ligands. All model compounds receive individual attention, highlighting the specific novelty that each provides for our understanding of the enzymatic mechanisms, such as oxygen atom transfer and proton-coupled electron transfer, or that each presents for exploiting new and useful catalytic capability. Overall, a shift in the application of these model compounds towards uncommon reactions is noted, the latter are comprehensively discussed.

Oxygen Atom Transfer Reactivity of Molybdenum(VI) Complexes Employing Pyrimidine- and Pyridine-2-thiolate Ligands

Four dioxidomolybdenum(VI) complexes of the general structure [MoO₂L₂] employing the S,N-bidentate ligands pyrimidine-2-thiolate (PymS, 1), pyridine-2-thiolate (PyS, 2), 4-methylpyridine-2-thiolate (4-MePyS, 3) and 6-methylpyridine-2-thiolate (6-MePyS, 4) were synthesized and characterized by spectroscopic means and single-crystal X-ray diffraction analysis (2-4). Complexes 1-4 were reacted with PPh₃ and PMe₃, respectively, to investigate their oxygen atom transfer (OAT) reactivity and catalytic applicability. Reduction with PPh₃ leads to symmetric molybdenum(V) dimers of the general structure [Mo₂O₃L₄] (6-9). Kinetic studies showed that the OAT from [MoO₂L₂] to PPh₃ is 5 times faster for the PymS system than for the PyS and 4-MePyS systems. The reaction of complexes 1-3 with PMe₃ gives stable molybdenum(IV) complexes of the structure [MoOL₂(PMe₃)₂] (10-12), while reduction of [MoO₂(6-MePyS)₂] (4) yields [MoO(6-MePyS)₂(PMe₃)] (13) with only one PMe₃ coordinated to the metal center. The activity of complexes 1-4 in catalytic OAT reactions involving Me₂SO and Ph₂SO as oxygen donors and PPh₃ as an oxygen acceptor has been investigated to assess the influence of the varied ligand frameworks on the OAT reaction rates. It was found that [MoO₂(PymS)₂] (1) and [MoO₂(6-MePyS)₂] (4) are similarly efficient catalysts, while complexes 2 and 3 are only moderately active. In the catalytic oxidation of PMe₃ with Me₂SO, complex 4 is the only efficient catalyst. Complexes 1-4 were also found to catalytically reduce NO₃^- with PPh₃, although their reactivity is inhibited by further reduced species such as NO, as exemplified by the formation of the nitrosyl complex [Mo(NO)(PymS)₃] (14), which was identified by single-crystal X-ray diffraction analysis. Computed ΔG^⧧ values for the very first step of the OAT were found to be lower for complexes 1 and 4 than for 2 and 3, explaining the difference in catalytic reactivity between the two pairs and revealing the requirement for an electron-deficient ligand system.

Bioinspired Tungsten Complexes Employing a Thioether Scorpionate Ligand

The synthesis and characterization of a series of novel tungsten complexes employing the bioinspired, sulfur-rich scorpionate ligand [PhTt] (phenyltris((methylthio)methyl)borate) are reported. Starting from the previously published tungsten precursor [WBr₂(CO)₃(NCMe)₂], a salt metathesis reaction with 1 equiv of Cs[PhTt] led to the desired complex [WBr(CO)₃(PhTt)] (1), making it the first tungsten complex employing a poly(thioether)borate ligand. Surprisingly, the reaction of [WBr₂(CO)₃(NCMe)₂] with an excess of the ligand gave complex [W(CO)₂(η²-CH₂SMe)(PhTt)] (2) with a bidentate (methylthio)methanide ligand as the major product. Thereby, phenyldi((methylthio)methyl)borane is formed, which was isolated and characterized by NMR spectroscopy. The bromido ligand in [WBr(CO)₃(PhTt)] was further substituted by the S,N-bidentate methimazole in order to make the first coordination sphere more sulfur-rich forming [W(CO)₂(mt)(PhTt)] (3). Alkyne tungsten complexes employing the sulfur-rich scorpionate ligand were accessible by reaction of [WBr₂(CO)(C₂R₂)₂(NCMe)] (R = Me, Ph) with Cs[PhTt] forming [WBr(CO)(C₂R₂)₂(PhTt- S, S')] (R = Me 4, Ph 5), with the potentially tridentate ligand coordinated only via two sulfur atoms. In the case of 4, the higher flexibility of the bidentate coordination leads to the formation of two isomers with respect to the six-membered ring formed by the tungsten center and the two coordinated sulfur atoms of the ligand. All complexes 1-5 were characterized by single-crystal X-ray diffraction analysis.

Interaction of Metal Oxido Compounds with B(C6 F5 )3

Lewis acid-base pair chemistry has been placed on a new level with the discovery that adduct formation between an electron donor (Lewis base) and acceptor (Lewis acid) can be inhibited by the introduction of steric demand, thus preserving the reactivity of both Lewis centers, resulting in highly unusual chemistry. Some of these highly versatile frustrated Lewis pairs (FLP) are capable of splitting a variety of small molecules, such as dihydrogen, in a heterolytic and even catalytic manner. This is in sharp contrast to classical reactions where the inert substrate must be activated by a metal-based catalyst. Very recently, research has emerged combining the two concepts, namely the formation of FLPs in which a metal compound represents the Lewis base, allowing for novel chemistry by using the heterolytic splitting power of both together with the redox reactivity of the metal. Such reactivity is not restricted to the metal center itself being a Lewis acid or base, also ancillary ligands can be used as part of the Lewis pair, still with the benefit of the redox-active metal center nearby. This Minireview is designed to highlight the novel reactions arising from the combination of metal oxido transition-metal or rare-earth-metal compounds with the Lewis acid B(C₆ F₅ )₃ . It covers a wide area of chemistry including small molecule activation, hydrogenation and hydrosilylation catalysis, and olefin metathesis, substantiating the broad influence of the novel concept. Future goals of this young and exciting area are briefly discussed.

Modeling Pyran Formation in the Molybdenum Cofactor: Protonation of Quinoxalyl-Dithiolene Promoting Pyran Cyclization

Mononuclear Mo and W enzymes require a unique ligand known as molybdopterin (MPT). This ligand binds the metal through a dithiolene chelate, and the dithiolene bridges a reduced pyranopterin group. Pyran scission and formation have been proposed as a reaction of the MPT ligand that may occur within the enzymes to adjust reactivity at the Mo atom. We address this issue by investigating oxo-Mo(IV) model complexes containing dithiolenes substituted by pterin or quinoxaline and a hydroxyalkyl poised to form a pyran ring. While the pterin-dithiolene model complex exhibits a low energy, reversible pyran cyclization, here we report that pyran cyclization does not spontaneously occur in the quinoxalyl-dithiolene model. However, protonating the quinoxalyl-dithiolene model induces pyran cyclization forming an unstable, pyrano-quinoxalyl-dithiolene complex which subsequently dehydrates and rearranges to a pyrrolo-quinoxlyl-dithiolene complex that was previously characterized. The protonated pyrano-quinoxalyl-dithiolene complex was characterized by absorption spectroscopy and cyclic voltammetry, and these results suggest pyran cyclization leads to a significant change in the Mo electronic structure exhibited as a strong intraligand charge transfer (ILCT) transition and 370 mV positive shift of the Mo(V/IV) reduction potential. The influence of protonation on quinoxaline reactivity supports the hypothesis that the local protein environment in the second coordination sphere of molybdenum cofactor (Moco) could control pyran cyclization. The results also demonstrate that the remarkable chemical reactivity of the pterin-dithiolene ligand is subtly distinct and not reproduced by the simpler quinoxaline analog that is often used to replace pterin in synthetic Moco models.

Comparison of molybdenum and rhenium oxo bis-pyrazine-dithiolene complexes - in search of an alternative metal centre for molybdenum cofactor models

A pair of structurally precise analogues of molybdenum and rhenium complexes, [Et4N]/K2[MoO(prdt)2] and K[ReO(prdt)2] (prdt = pyrazine-2,3-dithiolene), were synthesized. These complexes serve as structural models for the active sites of bacterial molybdenum cofactor containing enzymes. They were comprehensively characterized and investigated by NMR, computationally supported IR and resonance Raman spectroscopy, cyclic voltammetry, mass spectrometry, elemental analysis and single-crystal X-ray diffraction. All compiled data are discussed in the context of comparing chemical and electronic structures and consequences thereof. This study constitutes the first investigation of a potential alternative Moco model system bearing rhenium as the central metal in an identical coordination environment to its molybdenum analogue. Structural evaluation revealed a slightly stronger M[double bond, length as m-dash]O bond in the rhenium complex in accordance with spectroscopic results, i.e. observed bond strengths. Thermodynamic parameters for the redox processes MoIV ↔ MoV and ReIV ↔ ReV were obtained by temperature dependent cyclic voltammetry. In contrast to molybdenum, rhenium loses entropy upon reduction and its redox potential is more temperature sensitive, indicating more significant differences than the respective diagonal relationship between the two metals in the periodic table might suggest and questioning rhenium's suitability as a functional artificial active site metal.

Formation of Mono Oxo Molybdenum(IV) PNP Pincer Complexes: Interplay between Water and Molecular Oxygen

The synthesis of cationic mono oxo MoIV PNP pincer complexes of the type [Mo(PNPMe-iPr)(O)X]+ (X = I, Br) from [Mo(PNPMe-iPr)(CO)X2] is described. These compounds are coordinatively unsaturated and feature a strong Mo≡O triple bond. The formation of these complexes proceeds via cationic 14e intermediates [Mo(PNPMe-iPr)(CO)X]+ and requires both molecular oxygen and water. ESI MS measurements with 18O labeled water (H2 18O) and molecular oxygen (18O2) indicates that water plays a crucial role in the formation of the Mo≡O bond. A plausible mechanism based on DFT calculations is provided. The X-ray structure of [Mo(PNPMe-iPr)(O)I]SbF6 is presented.

Models for aerobic carbon monoxide dehydrogenase: synthesis, characterization and reactivity of paramagnetic MoVO(μ-S)CuI complexes

Complexes exhibiting the Mo^VO(μ-S)Cu^I cores, EPR properties, electronic structures and biomimetic reactions of aerobic Mo/Cu-containing carbon monoxide dehydrogenases are reported.

Reaction of [CoCp₂][Tp^iPrMoOS(OAr)] [Cp = η⁵-cyclopentadienyl; Tp^iPr = hydrotris(3-isopropylpyrazol-1-yl)borate; OAr = phenolate or derivative thereof] with [Cu(NCMe)(Me₃tcn)]BF₄ (Me₃tcn = 1,4,7-trimethyl-1,4,7-triazacyclononane) in MeCN at –30 °C results in the formation of red-brown/black, paramagnetic, μ-sulfido-Mo(v)/Cu(i) complexes, Tp^iPrMoO(OAr)(μ-S)Cu(Me₃tcn). The complexes possess the MoO(μ-S)Cu core found in aerobic carbon monoxide dehydrogenases (CODHs) and exhibit X-band EPR spectra closely related to those of semi-reduced CODH, with g_iso ∼ 1.937, hyperfine coupling to ^95,97Mo (a_iso = 39–42 × 10^–4 cm^–1) and strong superhyperfine coupling to ^63,65Cu (a_iso = 34–63 × 10^–4 cm^–1). Anisotropic spectra exhibit monoclinic symmetry with g₁ ∼ 1.996, g₂ ∼ 1.944 and g₃ ∼ 1.882, and nearly isotropic A_Cu values (75–90 × 10^–4 cm^–1). The X-ray structures of four derivatives (Ar = Ph, C₆H₄^tBu-2, C₆H₄^sBu-2, C₆H₄Ph-4) are reported and discussed along with that of the Ar = C₆H₃^tBu₂-3,5 derivative (communicated in C. Gourlay, D. J. Nielsen, J. M. White, S. Z. Knottenbelt, M. L. Kirk and C. G. Young, J. Am. Chem. Soc., 2006, 128, 2164). The complexes exhibit distorted octahedral oxo-Mo(v) and distorted tetrahedral Cu(i) centres bridged by a single bent μ-sulfido ligand, with Mo–S and Cu–S distances and Mo–S–Cu angles in the ranges 2.262–2.300 Å, 2.111–2.134 Å and 115.87–134.27°, respectively. The 2 t-butyl derivative adopts a unique phenolate conformation with O Created by potrace 1.16, written by Peter Selinger 2001-2019 ]]> Mo–O–Cα and O Created by potrace 1.16, written by Peter Selinger 2001-2019 ]]> Mo–S–Cu torsion angles of 92.7 and 21.1°, respectively, very different from those of the other structurally characterized derivatives (31–47 and 33–45°, respectively) and exhibits a relatively short Mo···Cu distance [3.752(2) Å vs. 3.806(7)–4.040(2) Å]. As well, the a_Cu value of this complex (34.3 × 10^–4 cm^–1) is much lower than the values observed for other members of the series (55–63 × 10^–4 cm^–1), supporting the hypothesis that the electronic structure of the MoO(μ-S)Cu core unit and the degree of intermetallic communication are strongly dependent on the geometry of the MoO(OR)(μ-S)Cu unit. The complexes participate in an electrochemically reversible Mo(vi)/Mo(v) redox couple and react with cyanide undergoing decupration and desulfurization reactions of the type observed for CODH.