Synthesis of Flowerlike g-C3 N4 /BiOBr with Enhanced Visible Light Photocatalytic Activity for Dye Degradation

Dye Degradation, Antimicrobial Activity, and Molecular Docking Analysis of Samarium-Grafted Carbon Nitride Doped-Bismuth Oxobromide Quantum Dots

Various concentrations of samarium-grafted-carbon nitride (Sm-g-C3N4) doped-bismuth oxobromide (BiOBr) quantum dots (QDs) are prepared by the co-precipitation method. Elemental evaluation, morphological, optical, and functional group assessment are studied employing characterization techniques. Based on the XRD pattern analysis, it is determined that BiOBr exhibits a tetragonal crystal structure. The electronic spectroscopy revealed an absorption peak for BiOBr at 315 nm and the bandgap energy (E g) decreasing from 3.9 to 3.8 eV with the insertion of Sm-g-C3N4. The presence of vibrational modes related to BiOBr at 550 cm-1 is confirmed through FTIR spectra. TEM revealed that pure BiOBr possessed non-uniform QDS, and agglomeration increased with the addition of Sm-g-C3N4. The catalytic performance of Sm-g-C3N4 into BiOBr (6 mL) in a neutral medium toward rhodamine B exhibited excellent results (99.66%). The bactericidal activity is evaluated against multi-drug resistance (MDR) Escherichia coli once the surface area is increased by dopant and the measured inhibition zone is assessed to be 3.65 mm. Molecular docking results supported the in vitro bactericidal potential of Sm-g-C3N4 and Sm-g-C3N4 doped-BiOBr as DNA gyraseE. coli inhibitors. This study shows that the novel Sm-g-C3N4 doped-BiOBr is a better catalyst that increases specific semiconductor's catalytic activity (CA).

Bismuth-rich oxyhalide (Bi7O9I3-Bi4O5Br2) solid-solution photocatalysts for the degradation of phenolic compounds under visible light

HYPOTHESIS

The development of solid-solution photocatalysts with tunable bandgaps and band structures, which are significant factors that influence their photocatalytic properties, is crucial.

EXPERIMENTS

We fabricated a series of novel bismuth-rich Bi₇O₉I₃-Bi₄O₅Br₂ solid-solution photocatalysts with controlled I:Br molar ratios (denoted as B-I_xBr_1-x, x  = 0.2, 0.3, 0.4, or 0.6) via a rapid, facile, and energy-efficient microwave-heating route. The photodegradations under visible-light irradiation of the phenolic compounds (4-nitrophenol (4NP), 3-nitrophenol (3NP), and bisphenol A (BPA)), and the simultaneous photodegradation of BPA and rhodamine B (RhB) in a coexisting BPA - RhB system were investigated.

FINDINGS

The B-I_0.3Br_0.7 solid solution provided the highest photocatalytic activity toward 4NP degradation, with degradation rates 32 and 4 times higher than those of Bi₇O₉I₃ and Bi₄O₅Br₂, respectively. The photodegradation efficiency of the studied phenolic compounds followed the order BPA (97.5%) > 4NP (72.8%) > 3NP (27.5%). The RhB-sensitization mechanism significantly enhanced the photodegradation efficiency of BPA. Electrochemical measurements demonstrated the efficient separation and migration of charge carriers in the B-I_0.3Br_0.7 solid solution, which enhanced the photocatalytic activity. The B-I_0.3Br_0.7 solid solution effectively activated molecular oxygen to produce •O₂^-, which subsequently produced other reactive species, including H₂O₂ and •OH, as revealed by reactive-species trapping, nitroblue tetrazolium transformation, and o-tolidine oxidation experiments.

A review on the progress of the photocatalytic removal of refractory pollutants from water by BiOBr-based nanocomposites

Organic matters from various sources such as the manufacturing, agricultural, and pharmaceuticals industries is continuously discharged into water bodies, leading to increasingly serious water pollution. Photocatalytic technology is a clean and green advanced oxidation process, that can successfully decompose various organic pollutants into small inorganic molecules such as carbon dioxide and water under visible light irradiation. Bismuth oxybromide (BiOBr) is an attractive visible light photocatalyst with good photocatalytic performance, suitable forbidden bandwidth, and a unique layered structure. However, the rapid combination of the electron-hole pairs generated in BiOBr leads to low photocatalytic activity, which limits its photocatalytic performance. Due to its unique electronic structure, BiOBr can be coupled with a variety of different functional materials to improve its photocatalytic performance. In this paper, We present the morphologically controllable BiOBr and its preparation process with the influence of raw materials, additives, solvents, synthesis methods, and synthesis conditions. Based on this, we propose design synthesis considerations for BiOBr-based nanocomplexes in four aspects: structure, morphology and crystalline phase, reduction of electron-hole pair complexation, photocorrosion resistance, and scale-up synthesis. The literature on BiOBr-based nanocomposites in the last 10 years (2012-2022) are summarized into seven categories, and the mechanism of enhanced photocatalytic activity of BiOBr-based nanocomposites is reviewed. Moreover, the applications of BiOBr-based nanocomposites in the fields of degradation of dye wastewater, antibiotic wastewater, pesticide wastewater, and phenol-containing wastewater are reviewed. Finally, the current challenges and prospects of BiOBr-based nanocomposites are briefly described. In general, this paper reviews the construction of BiOBr-based nanocomposites, the mechanism of photocatalytic activity enhancement and its research status and application prospects in the degradation of organic pollutants.

Fabrication of 2D/2D BiOBr/g-C3N4 with efficient photocatalytic activity and clarification of its mechanism

Precise regulation of photoexcited charge carriers for separation and transportation is a core requirement for practical application in the photocatalysis field. Herein, a 2D/2D BiOBr/g-C₃N₄ heterojunction is prepared by a self-assembly method and exhibits enhanced and stable activity for photocatalytic degradation of bisphenol A (BPA) and norfloxacin (NFA) under visible light. Compared to pure g-C₃N₄, the kinetic constants of BPA and NFA degradation over BiOBr/g-C₃N₄ are enhanced by about 14.74 and 4.01 times, respectively. The separation and transportation mechanism for the photoexcited charge carriers is clarified by electron paramagnetic resonance (EPR), in situ X-ray photoelectron spectroscopy (in situ XPS), and theoretical calculations. The results show that BiOBr/g-C₃N₄ exhibits the feature of a relative p-n junction, in which the charges photoexcited on BiOBr/g-C₃N₄ with high redox potentials can be kept and spatially separated. Moreover, the built-in electric field with the direction of g-C₃N₄ → BiOBr and the opportune band curvature provide the driving force for charge separation and transportation. Additionally, BPA and NFA degradation intermediates are also detected by liquid chromatography-mass spectrometry. It is of great significance to fabricate efficient photocatalysts for environmental purification and other targeted reactions.

Facile assembly and excellent elimination behavior of porous BiOBr-g-C3N4 heterojunctions for organic pollutants

Photocatalysis can be an effective technique for eliminating organic contaminants from water. In this study, BiOBr flower-spheres coupled with porous graphite carbon nitride (g-C₃N₄) were synthesized by controlling the dosage of cetyltrimethylammonium bromide (CTAB). Various characterization techniques were then applied to elucidate the structure-performance relationships of the resulting heterojunction photocatalysts in degrading organic dyes. Experimental results established an optimal molar ratio for KBr to CTAB of 5:1. Benefiting from a remarkable porous structure and tight coupling between porous g-C₃N₄ and BiOBr, the optimal BiOBr-g-C₃N₄(2%) exhibited enhanced visible light absorption capability and promoted the separation of photoinduced carriers. Total removal efficiency for rhodamine B (RhB, 25.0 mL, 20.0 mg L^-1) reached 87% within 30 min in the presence of BiOBr-g-C₃N₄(2%) (20.0 mg) (i.e., 1.51 μmol (g_{photocatalyst} min)^-1), which is superior to the performance of BiOBr (72%) (i.e., 1.25 μmol (g_{photocatalyst} min)^-1), g-C₃N₄ (21%) (i.e., 0.37 μmol (g_{photocatalyst} min)^-1). Furthermore, the photocatalytic reaction rate constant over the optimal heterojunction was 0.034 min^-1, which is significantly larger than those of porous g-C3N4 (0.003 min^-1) and BiOBr (0.015 min^-1). Moreover, this type II heterojunction showed good universality for other organic dyes (such as methyl violet, methylene blue, and crystal violet), highlighting a promising potential role in the elimination of environmental pollutants.

Double Z-scheme FeVO4/Bi4O5Br2/BiOBr ternary heterojunction photocatalyst for simultaneous photocatalytic removal of hexavalent chromium and rhodamine B

HYPOTHESIS

Fabrication of the heterojunction photocatalyst with appropriate band potentials as a promising method of inhibiting electron-hole pair recombination leading to enhanced photocatalytic properties.

EXPERIMENTS

Herein, BiOBr, Bi₄O₅Br₂, and binary BiOBr/Bi₄O₅Br₂ composite were selectively synthesized by employing a one-step microwave irradiation method. Then, double Z-scheme FeVO₄/Bi₄O₅Br₂/BiOBr ternary composites with different weight percentages (%wt) of FeVO₄ were fabricated and their photocatalytic applications were studied. The photodegradation of organic compounds (rhodamine B (RhB), methylene blue (MB) and salicylic acid (SA)), along with the photoreduction of hexavalent chromium (Cr(VI)) were investigated.

FINDINGS

Comparing with the single and binary photocatalysts, and a commercial TiO₂, the 1 %wt-FeVO₄/Bi₄O₅Br₂/BiOBr photocatalyst demonstrated superior visible-light-driven photocatalytic performance. In a Cr(VI)/RhB combined system, Cr(VI) photoreduction was further improved and coexisting RhB molecules were simultaneously degraded. Removal of Cr(VI) and RhB were maximized by adjusting both pH values and catalyst dosages. Based on UV-vis diffuse reflectance spectroscopy, photoluminescence spectroscopy, electrochemical investigations, active-species trapping, nitrotetrazolium blue transformation, and silver photo-deposition experiments, a double Z-scheme charge transfer mechanism with an RhB-sensitized effect was proposed. This special mechanism has led to significant enhancement in charge segregation and migration, along with higher redox properties of the ternary composite, which were responsible for the excellent photocatalytic activity.

DFT Study on Regulating the Electronic Structure and CO2 Reduction Reaction in BiOBr/Sulphur-Doped G-C3N4 S-Scheme Heterojunctions

Photocatalytic CO2 reduction is a promising method to mitigate the greenhouse effect and energy shortage problem. Development of effective photocatalysts is vital in achieving high photocatalytic activity. Herein, the S-scheme heterojunctions composed by BiOBr and g-C3N4 with or without S doping are thoroughly investigated for CO2 reduction by density functional theory (DFT) calculation. Work function and charge density difference demonstrate the existence of a built-in electric field in the system, which contributes to the separation of photogenerated electron-hole pairs. Enhanced strength of a built-in electric field is revealed by analysis of Bader charge and electric field intensity. The results indicate that S doping can tailor the electronic structures and thus improve the photocatalytic activity. According to the change in absorption coefficient, system doping can also endow the heterojunction with increased visible light absorption. The in-depth investigation indicates that the superior CO2 reduction activity is ascribed to low rate-determining energy. And both of the heterojunctions are inclined to generate CH3OH rather than CH4. Furthermore, S doping can further reduce the energy from 1.23 to 0.44 eV, indicating S doping is predicted to be an efficient photocatalyst for reducing CO2 into CH3OH. Therefore, this paper provides a theoretical basis for designing appropriate catalysts through element doping and heterojunction construction.

Advanced Two-Dimensional Heterojunction Photocatalysts of Stoichiometric and Non-Stoichiometric Bismuth Oxyhalides with Graphitic Carbon Nitride for Sustainable Energy and Environmental Applications

Semiconductor-based photocatalysis has been identified as an encouraging approach for solving the two main challenging problems, viz., remedying our polluted environment and the generation of sustainable chemical energy. Stoichiometric and non-stoichiometric bismuth oxyhalides (BiOX and BixOyXz where X = Cl, Br, and I) are a relatively new class of semiconductors that have attracted considerable interest for photocatalysis applications due to attributes, viz., high stability, suitable band structure, modifiable energy bandgap and two-dimensional layered structure capable of generating an internal electric field. Recently, the construction of heterojunction photocatalysts, especially 2D/2D systems, has convincingly drawn momentous attention practicably owing to the productive influence of having two dissimilar layered semiconductors in face-to-face contact with each other. This review has systematically summarized the recent progress on the 2D/2D heterojunction constructed between BiOX/BixOyXz with graphitic carbon nitride (g-C3N4). The band structure of individual components, various fabrication methods, different strategies developed for improving the photocatalytic performance and their applications in the degradation of various organic contaminants, hydrogen (H2) evolution, carbon dioxide (CO2) reduction, nitrogen (N2) fixation and the organic synthesis of clean chemicals are summarized. The perspectives and plausible opportunities for developing high performance BiOX/BixOyXz-g-C3N4 heterojunction photocatalysts are also discussed.

Fabrication of ternary AgBr/BiPO4/g-C3N4 heterostructure with dual Z-scheme and its visible light photocatalytic activity for Reactive Blue 19

A plasmonic photocatalyst of AgBr/BiPO₄/g-C₃N₄ was prepared. X-ray powder diffraction, Scanning electron microscope, Transmission electron microscopy, Fourier infrared spectroscopy, Ultraviolet Visible diffuse reflectance spectroscopy and photoluminescence emission spectra have been employed to determine the structure, morphology and optical property of the as-prepared AgBr/BiPO₄/g-C₃N₄ composite and analysis the reasons for improving photocatalytic efficiency. The optimal doping ratio of AgBr was 10 wt% by degrading 20 mg/L of Reactive Blue 19 (RB19) under visible light (λ > 420 nm), and 10 wt%AgBr/BiPO₄/g-C₃N₄ degraded 20 mg/L of RB19 to 2.59% at 40 min, which is ascribed to synergistic effects at the interface of AgBr, BiPO₄ and g-C₃N₄. The effect of catalyst dosage, initial concentration and initial pH of RB19 solution on photocatalytic efficiency was investigated. Four cycles of experiments were conducted. Finally, through the trapping experiment, we found that the main active factor for degrading RB19 in the photocatalytic process is O₂^-. The possible photocatalytic mechanism of AgBr/BiPO₄/g-C₃N₄ was discussed in connection with the synergistic effect of Ag and active substances at the AgBr/BiPO₄/g-C₃N₄ interface.

Novel 2D hybrids composed of SnIn4S8 nanoplates on BiOBr nanosheets for enhanced photocatalytic applications

In the last ten years, bismuth oxybromide (BiOBr) has attracted wide attention due to its superior optoelectronic property. However, its practical application still suffers from slow carrier transport and high carrier recombination. Here we report a kind of novel tannum indium sulfide (SnIn4S8)/BiOBr hybrid prepared by a two-step hydrothermal method. The results showed that small amount of SnIn4S8 had no influence on the crystal phase of BiOBr, but the morphology could be regulated from nanosheet to nanoflower. Specially, SnIn4S8 exerted a slight effect on the light absorption and band gap of BiOBr. Importantly, SnIn4S8/BiOBr hybrids exhibited remarkable enhancement of the photocatalytic activity towards the degradation of rhodamin B (RhB) dye molecules. SnIn4S8/BiOBr-0.20 with 99.8% degradation efficiency had the highest photocatalytic activity within 40 min, while it was only 71.1% for pure BiOBr. The enhanced photocatalytic activity was mainly attributed to efficient interfacial transfer and low carrier recombination. This work will help us understand the photocatalytic mechanism of bismuth oxyhalide hybrids.

A hybrid of g-C3N4 and porphyrin-based covalent organic frameworks via liquid-assisted grinding for enhanced visible-light-driven photoactivity

A series of 2D/2D photocatalysts, CuPor-Ph-COF/g-C₃N₄ composites, with superior photocatalytic performance were prepared by a liquid-assisted grinding method.

Z-scheme inverse opal CN/BiOBr photocatalysts for highly efficient degradation of antibiotics

Optimizing the heterojunction structure of semiconductor photocatalysts is vital for utilizing their abilities in organic matter degradation.

Preparation of Y2SiO5:Pr3+,Li and Na2NbxTa2−xO6/(Au/RGO) composites and investigation into visible-light driven photocatalytic hydrogen production

A three-component photocatalytic system is constructed by using Na₂Nb_xTa_2−xO₆ as the main catalyst, Y₂SiO₅:Pr³⁺,Li as the up-conversion luminescence agent and Au/RGO as the co-catalyst.