Nickel-Alkyl Complexes with a Reactive PNC-Pincer Ligand

Solvated Nickel Complexes as Stoichiometric and Catalytic Perfluoroalkylation Agents*

The acetonitrile-solvated [(MeCN)Ni(C₂ F₅ )₃ ]^- was prepared in order to compare and contrast its reactivity with the known [(MeCN)Ni(CF₃ )₃ ]^- towards organic electrophiles. Both [(MeCN)Ni(CF₃ )₃ ]^- and [(MeCN)Ni(C₂ F₅ )₃ ]^- successfully react with aryl iodonium and diazonium salts as well as alkynyl iodonium salts to give fluoroalkylated organic products. Electrochemical analysis of [(MeCN)Ni^II (C₂ F₅ )₃ ]^- suggests that, upon electro-oxidation to [(MeCN)_n Ni^III (C₂ F₅ )₃ ], reductive homolysis of a perfluoroethyl radical occurs, with the concomitant formation of [(MeCN)₂ Ni^II (C₂ F₅ )₂ ]. Catalytic C-H trifluoromethylations of electron-rich arenes were successfully achieved using either [(MeCN)Ni(CF₃ )₃ ]^- or the related [Ni(CF₃ )₄ ]^2- . Stoichiometric reactions of the solvated nickel complexes reveal that "ligandless" nickel is exceptionally capable of serving as reservoir of CF₃ groups under catalytically relevant conditions.

One to Find Them All: A General Route to Ni(I)-Phenolate Species

The past 20 years have seen an extensive implementation of nickel in homogeneous catalysis through the development of unique reactivity not easily achievable by using noble transition metals. Many catalytic cycles propose Ni(I) complexes as potential reactive intermediates, yet the scarcity of nickel(I) precursors and the lack of a general, non-ligand-specific protocol for their synthesis have hampered progress in this field of research. This has in turn also limited the access to novel, well-defined Ni(I) species for the development of new catalytic reactions. Herein, we report a simple, general route to access a wide variety of Ni(I)-phenolate complexes via an unusual example of an olefinic Ni(I) complex, [Ni(COD)(OPh*)] (COD = 1,5-cyclooctadiene, OPh* = O(^tBu)₃C₆H₂). This route has proven to be highly efficient for several coordination numbers and ligand classes enabling access to the following complexes: [Ni(IPr)(OPh*)] (IPr = 1,3-bis(2,6-diisopropylphenyl)imidazol-2-ylidene), [Ni(dcype)(OPh*)] (dcype = 1,2-bis(dicyclohexylphosphino)ethane), [Ni(dppe)(OPh*)] (dppe = 1,2-bis(diphenylphosphino)ethane), and [Ni(terpy)(OPh*)] (terpy = 2,2':6',2″-terpyridine). Moreover, reacting [Ni(dcype)(OPh*)] with trimethylsilyl triflate has led to the isolation of a unique example of a cationic binuclear Ni(I)-arene complex. All these complexes have been characterized by single-crystal X-ray, DFT, and EPR analyses, thus providing crucial experimental and theoretical information about their coordination environment and confirming a d⁹ electronic structure for all complexes involved. Overall, this new synthetic approach offers exciting opportunities for the discovery of new stoichiometric and catalytic reactivity as well as the mechanistic elucidation of Ni-based catalytic cycles.

Halogen Bonding Involving I2 and d8 Transition-Metal Pincer Complexes

We systematically investigated iodine–metal and iodine–iodine bonding in van Koten’s pincer complex and 19 modifications changing substituents and/or the transition metal with a PBE0–D3(BJ)/aug–cc–pVTZ/PP(M,I) model chemistry. As a novel tool for the quantitative assessment of the iodine–metal and iodine–iodine bond strength in these complexes we used the local mode analysis, originally introduced by Konkoli and Cremer, complemented with NBO and Bader’s QTAIM analyses. Our study reveals the major electronic effects in the catalytic activity of the M–I–I non-classical three-center bond of the pincer complex, which is involved in the oxidative addition of molecular iodine I2 to the metal center. According to our investigations the charge transfer from the metal to the σ* antibonding orbital of the I–I bond changes the 3c–4e character of the M–I–I three-center bond, which leads to weakening of the iodine I–I bond and strengthening of the metal–iodine M–I bond, facilitating in this way the oxidative addition of I2 to the metal. The charge transfer can be systematically modified by substitution at different places of the pincer complex and by different transition metals, changing the strength of both the M–I and the I2 bonds. We also modeled for the original pincer complex how solvents with different polarity influence the 3c–4e character of the M–I–I bond. Our results provide new guidelines for the design of pincer complexes with specific iodine–metal bond strengths and introduce the local vibrational mode analysis as an efficient tool to assess the bond strength in complexes.

Building up PtII -Thiosemicarbazone-Lysine-sC18 Conjugates

Three chiral tridentate N^N^S coordinating pyridine-carbaldehyde (S)-N4-(α-methylbenzyl)thiosemicarbazones (HTSCmB) were synthesised along with lysine-modified derivatives. One of them was selected and covalently conjugated to the cell-penetrating peptide sC18 by solid-phase peptide synthesis. The HTSCmB model ligands, the HTSCLp derivatives and the peptide conjugate rapidly and quantitatively form very stable PtII chlorido complexes [Pt(TSC)Cl] when treated with K2 PtCl4 in solution. The Pt(CN) derivatives were obtained from one TSCmB model complex and the peptide conjugate complex through Cl- →CN- exchange. Ligands and complexes were characterised by NMR, IR spectroscopy, HR-ESI-MS and single-crystal XRD. Intriguingly, no decrease in cell viability was observed when testing the biological activity of the lysine-tagged HdpyTSCLp, its sC18 conjugate HdpyTSCL-sC18 or the PtCl and Pt(CN) conjugate complexes in three different cell lines. Thus, given the facile and effective preparation of such Pt-TSC-peptide conjugates, these systems might pave the way for future use in late-stage labelling with Pt radionuclides and application in nuclear medicine.

Reversible nickel-metallacycle formation with a phosphinimine-based pincer ligand

Pincer ligands have a remarkable ability to impart control over small molecule activation chemistry and catalytic activity; therefore, the design of new pincer ligands and the exploration of their reactivity profiles continues to be a frontier in synthetic inorganic chemistry. In this work, a novel, monoanionic NNN pincer ligand containing two phosphinimine donors was used to create a series of mononuclear Ni complexes. Ligand metallation in the presence of NaOPh yielded a nickel phenoxide complex that was used to form a mononuclear hydride complex on treatment with pinacolborane. Attempts at ligand metallation with NaN(SiMe3)2 resulted in the activation of both phosphinimine methyl groups to yield an anionic, cis-dialkyl product, in which dissociation of one phosphinimine nitrogen leads to retention of a square planar coordination environment about Ni. Protonolysis of this dialkyl species generated a monoalkyl product that retained the 4-membered metallacycle. The insertion of 2,6-dimethylphenyl isocyanide (xylNC) into this nickel metallacycle, followed by proton transfer, generated a new five-membered nickel metallacycle. Kinetic studies suggested rate-limiting proton transfer (KIE ≥ 3.9 ± 0.5) from the α-methylene unit of the putative iminoacyl intermediate.

High-Valent NiIII and NiIV Species Relevant to C-C and C-Heteroatom Cross-Coupling Reactions: State of the Art

Ni catalysis constitutes an active research arena with notable applications in diverse fields. By analogy with its parent element palladium, Ni catalysts provide an appealing entry to build molecular complexity via cross-coupling reactions. While Pd catalysts typically involve a M⁰/M^II redox scenario, in the case of Ni congeners the mechanistic elucidation becomes more challenging due to their innate properties (like enhanced reactivity, propensity to undergo single electron transformations vs. 2e⁻ redox sequences or weaker M–Ligand interaction). In recent years, mechanistic studies have demonstrated the participation of high-valent Ni^III and Ni^IV species in a plethora of cross-coupling events, thus accessing novel synthetic schemes and unprecedented transformations. This comprehensive review collects the main contributions effected within this topic, and focuses on the key role of isolated and/or spectroscopically identified Ni^III and Ni^IV complexes. Amongst other transformations, the resulting Ni^III and Ni^IV compounds have efficiently accomplished: i) C–C and C–heteroatom bond formation; ii) C–H bond functionalization; and iii) N–N and C–N cyclizative couplings to forge heterocycles.

Selective metalation of phenol-type proligands for preparative organometallic chemistry

The selective C-metalation of phenol ester derived proligands is a readily applicable addition to state-of-the-art protocols toward cyclometalated structures, in particular of the base metals.

Catalytically Relevant Intermediates in the Ni-Catalyzed C(sp2)-H and C(sp3)-H Functionalization of Aminoquinoline Substrates

This Article describes the synthesis and characterization of cyclometalated aminoquinoline Ni^II σ-aryl and σ-alkyl complexes that have been proposed as key intermediates in Ni-catalyzed C-H functionalization reactions. These Ni^II complexes serve as competent catalysts for the C-H functionalization of aminoquinoline derivatives with I₂. They also react stoichiometrically with I₂ to form either aryl iodides or β-lactams within minutes at room temperature. Furthermore, they react with Ag^I salts at -30 °C to afford isolable five-coordinate Ni^III species. The Ni^III σ-aryl complexes proved inert toward C(sp²)-I bond-forming reductive elimination under all conditions examined (up to 140 °C in DMF). In contrast, a Ni^III σ-alkyl analogue underwent C(sp³)-N bond-forming reductive elimination at 140 °C in DMF to afford a β-lactam product. However, despite the ability of this latter Ni^III species to participate in stoichiometric product formation, the complex was not a competent catalyst for β-lactam formation. Overall, these results suggest against the intermediacy of Ni^III species in these C-H functionalization reactions.

Stabilizing a NiII-aqua complex via intramolecular hydrogen bonds: synthesis, structure, and redox properties

Hydrogen bonds within the secondary coordination sphere are effective in controlling the chemistry of synthetic metal complexes. Coupling the capacity of hydrogen bonds with those of redox-active ligands offers a promising approach to enhance the functional properties of transition metal complexes. These qualities were successfully illustrated with the [NNN]3-pincer ligand N,N' -(azanediylbis(2,l-phenylene))bis(2,4,6-triisopropyl-benzene-sulfonamido ([ibaps]3-) through the preparation of the NiII-OH2 complex, [NiII(ibaps)(OH2)]-. The [ibaps]3- ligand contains two appended sulfonamido groups that support the formation of intramolecular hydrogen bonds. The bulky 2,4,6-triisopropylphenyl rings are necessary to ensure that only one ligand binds to a single metal ion. The molecular structure of the complex shows a square planar N3O primary coordination sphere and two intramolecular hydrogen bonds involving the aqua ligand. Electrochemical measurements in acetonitrile revealed two oxidation events at potentials below that of the ferrocenium/ferrocene couple. Oxidation with 1 equiv of ferrocenium produced the one-electron oxidized species, [Ni(ibaps)(OH2)]. Experimental and computational studies support this assignment.

Selective Carbanion-Pyridine Coordination of a Reactive P,N Ligand to RhI

Ligands with reactive carbon sites in the periphery of a metal center have emerged as a powerful approach for metal-ligand bond activation. These reactive carbon sites are commonly generated by deprotonation strategies. Carbon-silicon bond cleavage is a potential alternative to access such constructs. Herein, the monodesilylation of bis-silyl-substituted P,N scaffold PNSi2 in the coordination sphere of [RhI (Cl)(CO)(PNSi2 )] (1) with sodium azide is disclosed. This affords a unique dinucleating anionic κ2 -C,N-κ1 -P ligand with a carbanionic methine carbon atom directly bound to rhodium as part of a four-membered Rh-N-C-C rhodacycle. This dimer undergoes meta-pyridine C-H activation facilitated by weak bases, which leads to a desymmetrization of the system and provides a σ,π-bridging 3-pyridyl fragment bound to RhI . The facile Si-C cleavage strategy may pave the way to studying the reactivity and functionalization of a variety of κ2 -C,N-coordinated pyridine scaffolds for selective transformations.

Radical-Type Reactivity and Catalysis by Single-Electron Transfer to or from Redox-Active Ligands

Controlled ligand-based redox-activity and chemical non-innocence are rapidly gaining importance for selective (catalytic) processes. This Concept aims to provide an overview of the progress regarding ligand-to-substrate single-electron transfer as a relatively new mode of operation to exploit ligand-centered reactivity and catalysis based thereon.