Four‐ and Five‐Coordinate Titanium(IV) Complexes Supported by the dpp‐bian Ligand in ROP of L ‐Lactide

Ligand-Induced Intramolecular Redox Diversity in Titanium Complexes with Acenaphthene-1,2-diimine

A series of the chlorido and alkoxychlorido titanium complexes of the general formula (dpp-Bian)Ti(OiPr)nCl3-n, where dpp-Bian = 1,2-bis[(2,6-iPr2C6H3)imino]acenaphthene n = 0 (2), 1 (3), 2 (4), as well as (dpp-Bian)Ti(OiPr)2 (5) and (dpp-Bian)Ti(OiPr)Cl3 (3-Cl), were isolated and characterized using single-crystal X-ray diffraction analysis and spectroscopic studies combined with density functional theory (DFT) calculations. In the solid state, compounds 2-4 reveal a square-pyramidal geometry at the metal center supported with monoanionic dpp-Bian, whereas 3-Cl with a neutral diimine ligand and 5 bearing a dianionic enebisamide dpp-Bian show, respectively, an octahedral and tetrahedral coordination surrounding the metal ion. Paramagnetic complexes 2-4 exhibit electron paramagnetic resonance spectra in both toluene solution and solid state, confirming the transfer of spin density from the metal ion to the dpp-Bian ligand as the number of alkoxy groups increases. The increase in polarity of the Ti-N bonds in the row 2 < 3 < 4 contributes to enhanced stability of the metal complexes with respect to O-donor molecules. Thus, in tetrahydrofuran (THF), compounds 2 and 3 undergo reversible solvolysis, whereas complex 4 is stable. The charge and spin density distributions as well as molecular orbital energies in 2-4 were analyzed on the basis of DFT calculations which also provided information on the electronic transition energies, absorption band assignments, and thermodynamic parameters of the reactions between the complexes and THF.

Metallocene catalysts for the ring-opening co-polymerisation of epoxides and cyclic anhydrides

The ring-opening co-polymerization (ROCOP) of epoxides and cyclic anhydrides is a versatile route to new polyesters. The vast number of monomers that are readily available means that an effectively limitless...

Reactions of Iso(thio)cyanates with Dialanes: Cycloaddition, Reductive Coupling, or Cleavage of the C═S or C═O Bond

The dialanes [(dpp-Bian)Al-Al(dpp-Bian)] (1) and [(dpp-dad)Al(THF)-(THF)Al(dpp-dad)] (2) (dpp-Bian = 1,2-[(2,6-iPr₂C₆H₃)NC]₂C₁₂H₆, dpp-dad = [(2,6-iPr₂C₆H₃)NC(CH₃)]₂) react with some isothiocyanates, isocyanates, and diphenylketene via [2 + 4] cycloaddition of the C═O or C═S bond across the C═C-N-Al fragment to afford complexes [L(X═C-Y)Al-Al(X═C-Y)L] with an intact Al-Al single bond (3, L = dpp-Bian, X = PhN, Y = O; 4, L = dpp-Bian, X = Ph₂C, Y = O; 6, L = dpp-dad, X = BnN, Y = S; 7, L = dpp-dad, X = tBuN, Y = O; 8, L = dpp-dad, X = iPrN, Y = S; and 9, L = dpp-dad, X = CyN, Y = S). A mixed C═N and C═O mode cycloadduct, [(dpp-Bian)(TosN═C-O)Al-Al(TosN-C═O)(dpp-Bian)] 5, was obtained in the reaction of 1 with tosylisocyanate. Heating the solution of 3 resulted in a thermal transformation and a change of the cycloaddition mode from C═O to C═N to give the product [(dpp-Bian)(PhN-C═O)Al(O)Al(PhN-C═O)(dpp-Bian)] 10. The reduction of 7 and 8 with Na yielded the products [Na(THF)_n]₂[(dpp-dad^-H)(X═C-Y)Al]₂ (12, X = iPrN, Y = S, n = 2 and 13, X = tBuN, Y = O, n = 3) in which one of the methyl groups of the backbone of the initial dpp-dad ligand was dehydrogenated. When 2 was reacted with the bulky adamantyl isocyanate AdNCO, the C-C coupling of two substrates occurred to form 14 [(dpp-dad)Al(O═C-NAd)₂Al(dpp-dad)] in which the coupled dianionic oxamide ligand bridged two Al atoms in a μ,η⁴-N,O/N,O mode. Moreover, in the presence of 2.0 equiv of Na metal, precursor 2 reacts with tBuNCS, p-TolylNCS, or Me₃SiNCO, possibly through the reduced Al^I intermediate, to yield the sulfur- or oxygen-bridged dimer [Na(solv)_n]₂[(dpp-dad)Al(μ-E)]₂ (15, E = S, solv = THF, n = 3 and 16, E = O, solv = DME, n = 2) upon C═S or C═O bond cleavage. Dialane 1 reacts with dimethylsulfone to give a Lewis adduct [(dpp-Bian)(Me₂SO₂)Al]₂ (17), which releases dimethylsulfone upon heating. The diamagnetic compounds 3-10 and 12-17 were characterized by NMR and IR spectroscopy. The molecular structures of 3-17 were established by single-crystal X-ray diffraction analysis. Electronic structures of the compounds and possible isomers have been examined by DFT calculations.

Development of Biodegradable Polymer Blends Based on Chitosan and Polylactide and Study of Their Properties

Composite materials of various compositions based on chitosan and polylactide were obtained in the form of films or porous bulk samples. Preliminarily, poly-d,l-lactide was synthesized by ring-opening polymerization of lactide in the presence of Ti(OⁱPr)₄. Polylactide obtained at components molar ratio [lactide]:[Ti(OⁱPr)₄] = 3:1 had the best molecular weight characteristics at a high product yield. Film composition with the weight ratio chitosan-polylactide 50:50 wt. % was characterized by high mechanical properties. The value of the tensile strength of the film was 72 MPa with a deformation of 10% and an elastic modulus of 40 GPa, which is higher than the tensile strength of native chitosan by ~three times. The observed effect is a consequence of the fact that the chitosan-polylactide composite has an amorphous structure in contrast to the native chitosan, which is proved by X-ray phase analysis. An increase in the elastic modulus of the composite in the range of 20–60 °C in contrast to polylactide was found by dynamic mechanical analysis. The observed effect is apparently caused by the formation of hydrogen bonds between functional groups of chitosan and polylactide which is possible through an increase in polylactide segments mobility when its glass transition temperature is reached. The composite material is biocompatible and characterized by high cellular adhesion of fibroblasts (line hTERT BJ-5ta). Their growth on the composite surface was 2.4 times more active than on native chitosan. Bulk porous samples of the composition with the weight ratio chitosan-polylactide 50:50 wt. % were synthesized by original method in ammonium bicarbonate presence. Samples were characterized by a porosity of 82.4% and an average pore size of 100 microns. The biodegradability of such material and absence of inflammatory processes were proven in vivo by the blood parameters of experimental animals. Thus, materials with the weight ratio chitosan-polylactide 50:50 wt. % are promising for potential use in regenerative medicine.